Alpha Networks WUSND12B 802.11a/b/g/n WIFI Dongle User Manual WLM 12NB1 without brand indd
Alpha Networks Inc. 802.11a/b/g/n WIFI Dongle WLM 12NB1 without brand indd
UserManual.wiki
>
Alpha Networks
>
WUSND12B User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Before UsePrecautions for use• Keep this product and this accessory out of the reach of children.• This product is for use with the Unique 1.0 m / 3.281 ft extension cable only.• Do not place this product in a location near a heat source, or a place subject to direct sunlight. Doing so may cause a distortion or malfunction.• Keep this product away from fl ammable objects or naked fl ame sources (such as lighted candles).• Do not repair this product by yourself. Refer servicing to qualifi ed personnel only.IntroductionThis product is the wireless adapter with a USB connector. It is for use with Blu-ray DiscTM Player only. You can use this product by connecting it to the USB port of a system.FCC Compliance StatementThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Interference: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Wireless RadioFor product available in the USA and Canada market, only channel 1–11 can be operated. Selection of other channels is not possible. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.If this device is going to be operated in 5.15–5.25GHz frequency range, then it is restricted in indoor environment only.Important: Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter.FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.SpecificationsStandards Compliance: IEEE 802.11a/b/g/nHost Interface: USB 2.0Authentication Mode: WPAPSK, WPA2PSKEncryption Type: WEP, TKIP, AESFrequency and Channel*1: 2.412 GHz – 2.462 GHz [CH1 – 11] 5.15 GHz – 5.25 GHz [CH36 – 48] 5.25 GHz – 5.35 GHz [CH52 – 64] 5.47 GHz – 5.725 GHz [CH100 – 140] 5.725 GHz – 5.85 GHz [CH149 – 165]Power Consumption: 2.2 W Mass (Approx.): USB Wireless LAN Adapter: 15 g Dimensions (Approx.) (w × h × d):USB Wireless LAN Adapter: 73.3 mm × 26.6 mm × 10.5 mmDesign and specifications are subject to change without notice.*1 The frequency and channel differ depending on the area.Standards Compliance• Compatible with IEEE 802.11a/b/g and 802.11n.Note• The location where the transmission is most effective differs depending on the usage environment. In this case, use the Unique 1.0 m / 3.281 ft extension cable.• Check precautions and instructions about the usage location of the product. For details, refer to the operating instructions of each product.Accessories• USB Wireless LAN Adapter (1) • Unique 1.0 m / 3.281 ft extension cable (1) • Operating Instructions (this manual) (1) USB WiFi Adapter for Blu-ray DiscTM/DVD PlayerWUS-ND12BOWNER’S MANUALFor USAUSA-Federal Communications Commission StatementConfiguring a wireless Internet connection This section describes how to configure the Blu-ray DiscTM player for accessing the Internet via a WiFi connection. The procedure for connecting to a wireless network depends on various network arameters. Read the following configuration methods to determine which instructions to use to onnect to your network.Wireless SettingIf no Ethernet cable is connected to the ETHERNET jack of your player, you can connect this USB WiFi adapter to your player and then select “Interface -> Wireless” in the Network setting menu and the following screen appears:LED Indicator2. Manual mode (connection to the Wireless Network via your input SSID)1) Press / to select Auto, then press OK. The following screen appears.3) Press OK to activate the on-screen keyboard. Carefully enter the network password by using the , , / to highlight the desired letter on the keyboard, and then press OK. (If you make a mistake, use , , / to highlight Back on the keyboard and press OK to erase the mistake. Or highlight Clear on the keyboard and press OK to clear them, them enter again.)4) Use , , / to highlight Enter on the keyboard, and then press OK. If the wireless network is functioning, a message “Connection success and IP is obtained” will appear on the TV.5) Press OK to close the message. The Blu-rayTM disc player is now connected to the network. From now on, when you turn on the player, it will automatically connect to the network; there is no need to repeat these steps again.Notes:• If you do not see this message, the Blu-ray DiscTM player was not able to connect to the network.• If the wireless network is encrypted using an unsupported encryption, you cannot connect to the network. You must change the router’s encryption type before proceeding.LED BehaviorInactive Turned OffActive Keep blinkingWireless settingScanManualAutoLED indicator1. Scan mode (select the Wireless Network which you scanned)1) Press / to select Scan, then press OK. A list of existing wireless networks near the Blu-ray DiscTM player will appear (It may take several seconds for this list to be created). For example:2) Press / to select the desired wireless network, and press OK to confirm.a. If the Blu-ray DiscTM player is connected to an Unencrypted Wireless Network, it will display "NONE" in the Security list and there is NO need to enter the password. If the wireless network is functioning, a message “Connection success and IP is obtained” will appear on the TV.3) Press OK to close the message. The Blu-rayTM disc player is now connected to the network. From now on, when you turn on the player, it will automatically connect to the network; there is no need to repeat these steps again.Note:• If you do not see this message, the Blu-ray DiscTM player was not able to connect to the network.b. If the Blu-ray DiscTM player is connected to an Encrypted Wireless Network, a menu similar to the following will appear:3. Auto (connection to the Wireless Networks Using WPS <Wi-Fi Protected Setup>)1) Press / to select Auto, then press OK.2) Use / to select PBC or PIN.3) Follow the instructions to continue operating the connection.2) Press OK to activate the on-screen keyboard and enter the SSID your desired. 3) Use , , / to highlight Enter on the keyboard, and then press OK.4) Follow the instructions to continue operating the connection.](https://usermanual.wiki/Alpha-Networks/WUSND12B/User-Guide-1622424-Page-1.png)
