Alcatel Lucent Deutschland CMROB132X5 9768 CMRO B13 2x5W V2 User Manual Installation Manual

Alcatel-Lucent Deutschland AG 9768 CMRO B13 2x5W V2 Installation Manual

Installation Manual

Title page9768Compact Metro Radio OutdoorHardware Installation3MN-CMRO-B13-IMOPIssue 2July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreementsUse pursuant to applicable agreementsFCC FILING FCC FILING
Legal noticeLegal noticeNokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of theirrespective owners.The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein.© 2016 Nokia.Contains proprietary/trade secret information which is the property of Nokia and must not be made available to, or copied or used by anyone outside Nokiawithout its written authorization.Not to be used or disclosed except in accordance with applicable agreements.Use pursuant to applicable agreementsNokia – Proprietary and ConfidentialUse pursuant to applicable agreementsFCC FILING FCC FILING
ContentsAbout this documentPurpose ............................................................................................................................................................................................. xixiWhat's new ...................................................................................................................................................................................... xixiIntended audience ......................................................................................................................................................................... xixiSupported systems ........................................................................................................................................................................ xixiHow to use this document ......................................................................................................................................................... xixiSafety information ...................................................................................................................................................................... xiixiiConventions used ........................................................................................................................................................................ xiixiiRelated information ................................................................................................................................................................... xivxivHow to order ................................................................................................................................................................................ xivxivHow to comment ........................................................................................................................................................................ xivxiv1Safety statementsOverview ...................................................................................................................................................................................... 1-11-1Structure of safety statements ............................................................................................................................................... 1-21-2General safety considerations ............................................................................................................................................... 1-41-4Safety ........................................................................................................................................................................................... 1-51-5Safety - specific hazards ......................................................................................................................................................... 1-61-6Product safety .......................................................................................................................................................................... 1-101-102Hardware architecture and functionalityOverview ...................................................................................................................................................................................... 2-12-1Functional description ............................................................................................................................................................. 2-22-2Physical description ................................................................................................................................................................. 2-42-4Supported installation options ........................................................................................................................................... 2-122-12....................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements iiiFCC FILING FCC FILING
Hardware and ancillary items ............................................................................................................................................ 2-142-143InstallationOverview ...................................................................................................................................................................................... 3-13-1Install the 9768 CMRO on a pole or a wallOverview ...................................................................................................................................................................................... 3-23-2Pre-installation information .................................................................................................................................................. 3-33-3Installation clearances ............................................................................................................................................................. 3-53-5Procedure 3-1: Pole mount the 9768 CMRO ................................................................................................................ 3-63-6Procedure 3-2: Wall-mount the 9768 CMRO ............................................................................................................. 3-113-11ALED State DescriptionOverview ..................................................................................................................................................................................... A-1A-1LED Status for 9768 CMRO ............................................................................................................................................... A-2A-2BProduct conformance statementsOverview ..................................................................................................................................................................................... B-1B-1United States complianceIntroduction ................................................................................................................................................................................ B-2B-2Federal Communications Commission ............................................................................................................................ B-3B-3Product safety conformance statements ........................................................................................................................... B-5B-5Antenna exposure statements .............................................................................................................................................. B-6B-6FDA/IEC optical transmitter product compliance statements ................................................................................. B-7B-7Eco-environmental statements ............................................................................................................................................ B-8B-8GlossaryIndexContents........................................................................................................................................................................................................................................................................................................................................................................................................................................................................iv Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
List of tables1Terminology .................................................................................................................................................................. xiixii2-1 9768 CMRO ................................................................................................................................................................ 2-52-52-2 Certifications and standards ................................................................................................................................... 2-62-62-3 Environmental parameters ...................................................................................................................................... 2-62-62-4 Pole-mount installation ......................................................................................................................................... 2-142-142-5 Wall-mount installation ......................................................................................................................................... 2-142-143-1 Recommended wall anchor materials ................................................................................................................ 3-43-4A-1 LED interpretations ................................................................................................................................................. A-2A-2....................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements vFCC FILING FCC FILING
List of tables........................................................................................................................................................................................................................................................................................................................................................................................................................................................................vi Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
List of figures2-1 Alcatel-Lucent 9768 CMRO ................................................................................................................................. 2-42-42-2 Alcatel-Lucent 9768 CMRO connection interfaces ...................................................................................... 2-82-82-3 9768 CMRO pole and wall-mount installation ............................................................................................ 2-122-122-4 9768 CMRO daisy chaining installation example ...................................................................................... 2-132-133-1 Mounting bracket ....................................................................................................................................................... 3-33-33-2 9768 CMRO installation clearances ................................................................................................................... 3-53-5A-1 LED indicator ............................................................................................................................................................ A-2A-2....................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements viiFCC FILING FCC FILING
List of figures........................................................................................................................................................................................................................................................................................................................................................................................................................................................................viii Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
List of procedures3 Installation3-1 Pole mount the 9768 CMRO ................................................................................................................................ 3-63-63-2 Wall-mount the 9768 CMRO ............................................................................................................................. 3-113-11....................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements ixFCC FILING FCC FILING
List of procedures........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xNokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
About this documentAbout this documentPurposeThe purpose of this document is to provide hardware installation instructions for theAlcatel-Lucent 9768 Compact Metro Radio Outdoor product.What's newThe reissue reasons are:Issue number Issue date Reason for reissue2 July 2016 Standard1 May 2016 StandardIntended audienceThe audience for this document is Hardware Installation personnel relating to theAlcatel-Lucent 9768 Compact Metro Radio Outdoor (9768 CMRO).Supported systemsThis document applies to the following LTE FDD Alcatel-Lucent 9768 Compact MetroRadio Outdoor B13 2x5W v2 model.How to use this documentStart with the first chapter and work through the manual to the end. Once you have donethis, you will have carried out the hardware installation completely and in the propersequence....................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements xiFCC FILING FCC FILING
Listed are terminology and naming conventions that may appear in the 9768 CMROdocumentation.Table 1 TerminologyThe full product name, Alcatel-Lucent 9768 Compact Metro Radio Outdoor B13 2x5W v2, isalso referred to as:•Alcatel-Lucent 9768 CMRO•9768 CMROThe full product name, Alcatel-Lucent 7705 Service Aggregation Router-Optical (SAR-O), isalso referred to as:•Alcatel-Lucent 7705 SAR-O•7705 SAR-OThe full product name, Alcatel-Lucent 5620 Service Aware Manager (SAM), is also referred toas:•Alcatel-Lucent 5620 SAM•5620 SAMThe terms eNodeB Network Element Manager (NEM), eNodeB NEM, and NEM are used todescribe the eNodeB local maintenance applications.Safety informationFor your safety, this document contains safety statements. Safety statements are given atpoints where risks of damage to personnel, equipment, and operation may exist. Failure tofollow the directions in a safety statement may result in serious consequences.Conventions usedThe following typographical conventions are used in this manual:Appearance Descriptionemphasis Text that is emphasizeddocument titles Titles of books or other documentsfile or directory names The names of files or directoriesgraphical user interface text Text that is displayed in a graphical userinterface or in a hardware labelkeyboard keys The name of a key on the keyboardsystem input Text that the user types as input to a systemCommand names and text that the user typesor selects as input to a systemAbout this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xii Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Appearance Descriptionsystem output Text that a system displays or printsvariablesA value or command-line parameter that theuser provides[ ] Text or a value that is optional{value1 |value2}{variable1|variable2}A choice of values or variables from whichone value or variable is used<delimited text> Specifies:•Text that is time-dependent (such asrelease, version, date, or time stamp)displayed in file and directory names•A value that the user suppliesExamples:“The ATM and IP rules files are stored in the<User-home-directory>\<WPS-version>\data\user\ samples\rules directory.”“The list of parameters you must fill in isprovided in a template zip file:wps-lte-templates-<version>.zip ”>Indicates access to a function through a menusequence. The “ >” (greater than) symbol isused to represent the succession of menus orcommands selected from the graphical userinterface (GUI) or a PC or Citrix server menuor task bar item.1Example:“Select the Import command of the Templatemenu (submenu of Interfaces)…” is indicatedby:“Select Interfaces > Template > Import…”+The +(plus) symbol is used to form keycombinations that are pressed simultaneously,such as SHIFT+ALT+L.>Use the “ >” (greater than) symbol to formkey combinations that are pressed and thenreleased in sequence, such as ESC>ALT>A.2About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements xiiiFCC FILING FCC FILING
Notes:1. Spaces are included on either side of the “ >” (greater than) symbol when used to representthe succession of menus or commands from the graphical user interface (GUI) or a PC menuor task bar item.2. Spaces are not included on either side of the “ >” symbol when used to represent keyboardkey combination that are pressed and then released in sequence.Related informationNot applicable.How to orderNot applicable.How to commentNote to reviewers: The following "How to comment" text will appear in the finaldocument when it is published. However, the feedback method described below is for useonly on final documents. Please send your review comments to the author using theprocess you were given when you received this draft document.To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-lucent.com/comments/) or e-mail your comments to the Comments Hotline(comments@alcatel-lucent.com).About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xiv Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
11Safety statementsOverviewPurposeThis chapter provides general information on the structure of safety instructions andsummarizes general safety requirements.General safety and residual riskThe equipment has been developed in line with state-of-the-art technology and conformswith current national and international safety requirements.The equipment is considered safe during normal operation when safe working practicesare complied with. However, hazards may arise if procedures are not followed correctlyor safe working practices are not complied with.ContentsStructure of safety statements 1-2General safety considerations 1-4Safety 1-5Safety - specific hazards 1-6Product safety 1-10...................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 1-1FCC FILING FCC FILING
Structure of safety statementsOverviewThis topic describes the components of safety statements that appear in this document.General structureSafety statements include the following structural elements:Item Structure element Purpose1 Safety alert symbol Indicates the potential for personal injury(optional)2 Safety symbol Indicates hazard type (optional)3 Signal word Indicates the severity of the hazard4 Hazard type Describes the source of the risk of damage orinjury5 Safety message Consequences if protective measures fail6 Avoidance message Protective measures to take to avoid the hazard7 Identifier The reference ID of the safety statement(optional)SAMPLELifting this equipment by yourself can result in injurydue to the size and weight of the equipment.Always use three people or a lifting device to transportand position this equipment. [ABC123]CAUTIONLifting hazardSafety statements Structure of safety statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-2 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Signal wordsThe signal words identify the hazard severity levels as follows:Signal word MeaningDANGER Indicates an extremely hazardous situation which, if not avoided, willresult in death or serious injury.WARNING Indicates a hazardous situation which, if not avoided, could result indeath or serious injury.CAUTION Indicates a hazardous situation which, if not avoided, could result inminor or moderate injury.NOTICE Indicates a hazardous situation not related to personal injury.Safety statements Structure of safety statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 1-3FCC FILING FCC FILING
General safety considerationsShock hazardsWARNINGElectric-shock hazardSome parts of all electrical installations are energized. Failure to follow safe workpractices and the safety warnings may lead to bodily injury and property damage.For this reason, only trained and qualified personnel (electrical workers as defined inIEC 60215 or EN 60215 + A1 or in the National Electrical Code or in ANSI/NFPA No.10) may install or service the installation.WARNINGElectric-shock hazardThere is a danger of electric shock if the grounding system is inadequate.You must comply with the grounding requirements for the grounding system.Safety statements General safety considerations........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-4 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
SafetyGeneral precautions for installation proceduresWARNINGFailure to observe these safety precautions may result in personalinjury or damage to equipment.•Read and understand all instructions.•Follow all warnings and instructions marked on this product.•Installation and maintenance procedures must be followed and performed bytrained personnel only.•The equipment must be provided with a readily accessible disconnect deviceas part of site preparation.•Grounding and circuit continuity is vital for safe operation of the equipment.Never operate the equipment with grounding/bonding conductordisconnected.•Install only equipment identified in the product's installation manual. Use ofother equipment may result in an improper connection which could lead tofire or injury.•Use caution when installing or modifying telecommunications equipment.•Before servicing, disconnect power input to reduce the risk of energyhazards.•For continued protection against risk of fire, all fuses used in this productmust be replaced only with fuses of the same type and rating.•Never install telecommunications equipment during a lightning storm orwhen conditions are wet.•Never touch uninsulated wiring or terminals carrying direct current orringing current, and never leave this wiring exposed. Protect and tapeuninsulated wiring and terminals to avoid risk of fire, electrical shock, andinjury to personnel.•Never spill liquids of any kind on the product.•To reduce the risk of an electrical shock, do not disassemble the product.Opening and removing covers and/or circuit boards may expose you todangerous voltages or other risks. Incorrect reassembly can cause electricalshock when the unit is subsequently used.•for PERMANENTLY CONNECTED EQUIPMENT, a readily accessibledisconnect device must be incorporated external to the equipment.Safety statements Safety........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 1-5FCC FILING FCC FILING
Safety - specific hazardsDangerDANGERElectric-shock hazardWorking in severe weather can result in personal injury or death and damage to theequipment.Never install or perform maintenance during severe weather (high winds, lightning,blizzards, hurricane etc.).DANGERNoxious-substance hazardUse of unspecified cleaning agents can result in personal injury.Use only specified cleaning agents. Never use flammable solvents.Always ensure that there is adequate ventilation in the work area and wear theappropriate personal protective equipment.WarningWARNINGLaser hazardUse of controls or adjustments or performance of procedures other than those specifiedherein may result in hazardous laser radiation exposure.Do not view directly into the laser beam with optical instruments such as a fibermicroscope because viewing of laser emission in excess of Class 1 limits significantlyincreases the risk of eye damage.Never look into the end of an exposed fiber or an open connector as long as the opticalsource is switched on.Ensure that the optical source is switched off before disconnecting optical fiberconnectors.Safety statements Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-6 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
WARNINGElectric-shock hazardSome parts of all electrical installations are energized. Failure to observe this fact andthe safety warnings may lead to bodily injury and property damage.For this reason, only trained and qualified personnel (electrical workers as defined inIEC 60215 + A1 or EN 60215) may install or service the installation.WARNINGElectric-shock hazardThe power supply lines to the equipment are energized. Contact with parts carryingcurrent can cause serious injury, possibly including death, even hours after the event.Turn off and lock out the system power at the disconnect device before working on orservicing the equipment.WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.CautionCAUTIONRF hazardRF exposure in excess of applicable limits can result in personal injury.Metro Cells are designed and installed in order that they are compliant with the exposureguidelines laid down by 47 CFR 1.1307 -1.1310.For all staff that are required to work in close proximity to the equipment, for examplemaintenance personnel, contact with the antenna should be avoided. No such personsshall stay in front of the product at a distance of less than 8 cm.No other persons shall stay in front of the product at a distance of less than 22 cm.Safety statements Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 1-7FCC FILING FCC FILING
CAUTIONElectric-shock hazardDOUBLE POLE/NEUTRAL FUSINGA fuse is used in the neutral of single-phase equipment either permanently connected orprovided with a non-reversible plug. After operation of the fuse, parts of the equipmentthat remain energized might represent a hazard during servicing.Failure to observe this fact and the safety warnings may lead to bodily injury andproperty damage.CAUTIONHot-surface hazardThe surfaces of the CMRO can become hot enough to cause burns on unprotected skin.On the product label, the universal symbol for Hot Surface (shown here) emphasizes thishazard.Before handling the unit, wait until its surfaces have cooled and, where the followingconditions apply, ensure that it is mounted out of the public's reach.For installations in ambient temperatures exceeding 46° C, surface temperature mayexceed 70° C. In these situations, this equipment is intended for installation where accessis restricted to only qualified service personnel.Safety statements Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-8 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
NoticesNOTICEESD hazardSemiconductor devices can be damaged by electrostatic discharges (ESD)The following rules must be complied with when handling any module containingsemiconductor components:•Wear conductive or antistatic working clothes (for example, coat made of 100%cotton).•Wear a grounded wrist strap.•Wear shoes with conductive soles on a conductive floor surface or conductive workmat.•Leave the modules in their original packaging until ready for use.•Make sure there is no difference in potential between yourself, the workplace, and thepackaging before removing, unpacking, or packing a module.•Whenever handling ESD-sensitive components, do not touch any connection pins ortracks.•Place modules removed from the equipment on a conductive surface.•Test or handle the module only with grounded tools on grounded equipment.•Handle defective modules exactly like new ones to avoid causing further damage.NOTICECondensationSudden changes in the weather may lead to the formation of condensation oncomponents. Operating the unit when condensation moisture is present can destroy theunit.Units which show signs of condensation must be dried before installation.NOTICEToolsTools left in the working area can cause short circuits during operation which can lead tothe destruction of units.Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,have been left in or on the equipment.Safety statements Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 1-9FCC FILING FCC FILING
Product safetyEquipment safetySafety information for this equipment can be found on various Caution, Warning, Danger,information labels or instructions affixed to or included with the product or includedwithin this document. Informational and cautionary labels may appear near the item theyaddress or may be grouped in a single location on the equipment. Warnings are typicallyadjacent to the hazard that is noted on the label. The instructions, cautions and warningsfound on these labels must be understood and observed by all personnel involved with theequipment installation and maintenance.Safety statements Product safety........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-10 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
22Hardware architectureand functionalityOverviewPurposeThis chapter provides a high-level overview of the Alcatel-Lucent 9768 Compact MetroRadio Outdoor (9768 CMRO) product and functionality.ContentsFunctional description 2-2Physical description 2-4Supported installation options 2-12Hardware and ancillary items 2-14...................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-1FCC FILING FCC FILING
Functional descriptionOverviewThe Alcatel-Lucent 9768 Compact Metro Radio Outdoor product is a next-generationMetro Radio Outdoor product that:•provides 10x the output power at half the size when compared with the Alcatel-Lucent9768 Metro Radio Outdoor (9768 MRO)•enables mobile service providers (MSPs) to deliver cost-effective capacity to urbanhotspots, for example, stadiums, campuses, train stations, bus stops, and other urbanenvironments•provides affordable coverage to rural locations•is designed to be deployed as an overlay in an existing macro coverage area toprovide increased coverage in public open spaces.Product features and capabilitiesThe product features and capabilities in this release are:•Supports band 13 (B13)•Supports LTE FDD•Single carrier•Supports the following LTE carrier bandwidths:– 5 MHz– 10 MHz9768 CMROwith Solar Shield9768 CMROwithout Solar ShieldHardware architecture and functionality Functional description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-2 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
•Supports UL of 777 MHz to 787 MHz (10 MHz), and DL of 746 MHz to 756 MHz(10 MHz)•2x5 W total power at antenna connector•Standard 2x2 MIMO configurations, 2-Tx, and 2-Rx diversity•Supports plug-and-play (PnP) to connect automatically to the network•Supports CPRI fronthaul and daisy chaining of up to four 9768 CMROs•CSA, FCC, and IP65 certificationsHardware architecture and functionality Functional description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-3FCC FILING FCC FILING
Physical descriptionOverviewThe Alcatel-Lucent 9768 Compact Metro Radio Outdoor is housed in an Alcatel-Lucentdesigned metallic case, adhering to NEMA Type-4 enclosure standard. The product isdesigned to be deployed close to users, usually in outdoor environments, such as on lightpoles or building walls, with a vertical profile that hides cable connectors and mountingkit for a smooth integration into the surrounding environment.The 9768 CMRO product is shown in the following figure.Weights and dimensionsThe physical dimensions of the Alcatel-Lucent 9768 CMRO are:Figure 2-1 Alcatel-Lucent 9768 CMRO9768 CMRO(Front view withSolar Shield)9768 CMRO(Rear view)Hardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-4 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Table 2-1 9768 CMROWidth 180 mm (7.1 in)Height 265 mm (10.4 in)296 mm (11.6 in) including antenna connectors310 mm (12.2 in) including AC power connector cover321 mm (12.6 in) including DC power connector coverHeightWidthDepth9768 CMROfront view withSolar Shield9768 CMRObottom viewHardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-5FCC FILING FCC FILING
Table 2-1 9768 CMRO (continued)Depth 155 mm (6.1 in) without Solar Shield160 mm (6.3 in) with Solar ShieldVolume 7.4 LWeight 7.2 kg (15.8 lb) without Solar ShieldEnvironmental and regulatory specificationsTable 2-2 Certifications and standardsSafety CSARadio FCCEnvironmental IP65Table 2-3 Environmental parametersTemperature range - 40°C to +50°C (+55°C with Solar Shield)Relative humidity 5% to 100%Main unitsThe 9768 CMRO consists of four main units, which are responsible for radio, RFfiltering, fronthaul, and power supply functions.Unit FunctionMOAD2 board SFP modules and power forwarding:•Two CPRI SFP ports•5.3-V to 3.3-V power convertorRadio board Radio:•LTE Band 13•Two mini-DIN 4.3-10 external RF antenna connectorsRF filter RF antenna filter that supports:•B13 UL frequency range from 777 MHz to 787 MHz•B13 DL frequency range from 746 MHz to 756 MHzHardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-6 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Unit FunctionPower Supply Unit(PSU)•PSU AC variant - Internal power module unit providesAC-to-DC conversion (5.3-V output) to the MOAD2 board.•PSU DC variant - Internal power module unit providesDC-to-DC conversion (5.3-V output) to the MOAD2 board.The MOAD2 board distributes 5.3-V output and provides secondaryDC-to-DC conversion to generate all other (lower) voltages neededwithin the board.Connection interfacesThe following figure shows the connection interfaces of the 9768 CMRO.Hardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-7FCC FILING FCC FILING
Connection location Description9768 CMRO (bottom) Power supply connector (AC or DC)Two mini-DIN 4.3-10 RF antenna connectorsGrounding pointFigure 2-2 Alcatel-Lucent 9768 CMRO connection interfacesRF antennaconnector RF antennaconnectorPowerconnectorGroundingpoint9768 CMRO (bottom view)9768 CMRO (rear view)CPRI 2 fordaisy chainingCPRI 1 forfronthaulHardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-8 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Connection location Description9768 CMRO (rear) Two CPRI SFP ports; “CPRI 1” and “CPRI 2”“CPRI 1” is used to connect to the BBU or to daisy-chain withanother 9768 CMRO and “CPRI 2” is used to daisy chain to thenext 9768 CMROPower supplyThe Alcatel-Lucent 9768 CMRO product supports either AC or DC external power input.9768 CMRO Power supply detailsAC variant AC power supply that operates from a single phase, three-wire voltagesource in the 95 to 265 Volt range.The AC power is surge protected internally, and conforms to IEC60364-1 and GR-1089-Core, Issue 6, Section 4.6.2, Table 4-2 SurgeTest #20.Fully configured and operating at maximum levels, the productconsumes 100 W. Typical power consumption is 85 W.DC variant -48-V DC power supply that operates over the voltage range from-40-V DC to -57-V DC.The DC power is surge protected internally, and conforms to GR-1089,Issue 6, Appendix B for Port Type 8a.Fully configured and operating at maximum levels, the productconsumes 100 W. Typical power consumption is 85 W.Fronthaul interfaceThe fronthaul interface is at the back of the 9768 CMRO supporting two optical CPRISFP ports:•The “CPRI 1” SFP port (CPRI input port) is used to connect to the BBU or to thedaisy chaining port of another 9768 CMRO.•The “CPRI 2” SFP port (Daisy chaining output port) is used for daisy chaining toanother 9768 CMRO.Hardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-9FCC FILING FCC FILING
RF antennaThe Alcatel-Lucent 9768 CMRO supports two external antenna connectors (typemini-DIN) at the bottom of the enclosure supporting external RF antennas. The externalRF antennas are customer supplied.9768 CMRO (rear view)9768 CMRO (rear view)CPRI 2 fordaisy chainingCPRI 1 forfronthaulExternal RF antennas*The RF antennas in the graphic are illustrative onlyHardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-10 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Status indicatorsThe 9768 CMRO supports a single multi-color LED which is located on the rear lowerportion of the casing. The LED is not intended for use during normal operation of theequipment. However, it can provide a visual status of the unit during initial installationand commissioning.Product labelingThe Alcatel-Lucent 9768 CMRO product label provides the following information:•Model name•Part number•Serial number•Power input range•Environmental marking (WEEE/RoHS) applicable to the deviceLED indicator9768 CMRO(rear view)Hardware architecture and functionality Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-11FCC FILING FCC FILING
Supported installation optionsOverviewThe following section describes the supported installation options for the Alcatel-Lucent9768 CMRO product. The supported installation options include:•Standard installation options for 9768 CMRO (pole and wall-mount installation).•Daisy chain installation options, where up to four 9768 CMROs can be daisy-chainedtogether and share the same fronthaul port.Standard installation optionsThe standard installation options include pole (light poles, lamp posts, and so on) andwall-mount (building walls) installations.Daisy chain installation optionsIn a daisy chain installation option, up to four 9768 CMROs can be daisy chainedtogether, where they share the same fronthaul port, thus reducing the investment costneeded to connect the 9768 CMROs to the fronthaul network and aggregating the uplinkand downlink traffic.Daisy chaining of 9768 CMRO units is supported only with macro eNodeB BBUs (notwith 976x Metro Cells). The following table provides the supported 9768 CMRO daisychaining configurations for a BBU hardware configuration and CPRI rate:Note: Mixed BBU configurations do not support daisy chaining.Figure 2-3 9768 CMRO pole and wall-mount installationPole-mount installation Wall-mount installationHardware architecture and functionality Supported installation options........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-12 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
The BBU and all of the RFMs on the daisy chain, including 9768 CMROs, auto-negotiateto use the same CPRI rate when the system starts. CPRI line rates along a daisy chain areuniform and determined by the rate on the first segment. If the BBU wants to change theCPRI line rate for the daisy chain, each RFM starts its master interface only if the slaveinterface is up and uses only the line rate of the slave interface.The daisy-chained 9768 CMROs can be co-located or separated by some distance. Theactual distance depends on the BBU, SFP, and fiber optic cable configuration used for thedaisy chain. Refer to, “Hardware and ancillary items” (p. 2-14) for supported SFPs andfiber optic cable types and lengths.The 9768 CMRO supports two optical CPRI SFP ports at the back; one for fronthaul(“CPRI 1” port) and the other for daisy chaining (“CPRI 2” port).Figure 2-4 9768 CMRO daisy chaining installation exampleBBUHardware architecture and functionality Supported installation options........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-13FCC FILING FCC FILING
Hardware and ancillary itemsOverviewThe following section lists the Alcatel-Lucent 9768 CMRO base hardware equipment, theinstallation kits, and ancillary items that can be ordered from Alcatel-Lucent.9768 CMRO base itemsThe product packaging contains the following base items:•9768 CMRO•9768 CMRO mounting frame•9768 CMRO basic installation kitAncillary itemsThe following tables list the ancillary items that are available for order fromAlcatel-Lucent in support of the defined equipment installation and configuration options.Required installation itemsThe following table lists the installation items required and available for order fromAlcatel-Lucent in support of the equipment installation options. Each item must beordered separately.Table 2-4 Pole-mount installationItem Description Use9768 CMRO base items 9768 CMRO9768 CMRO mounting frame9768 CMRO basic installation kitMandatoryTool for metal band Standard BAND-IT®Banding Tool(CR00169), including operatinginstructionsMandatory for pole-mount onlyTighten the bracket metal band around thepoleBracket metal band kit Stainless steel bandsBand buckles (Ear-Lokt)MandatoryAttach the9768 CMRO or vertical tiltbracket to a pole (diameter 50 mm to 300mm) using stainless steel bands.Table 2-5 Wall-mount installationInstallation kit Description Use9768 CMRO base items 9768 CMRO9768 CMRO mounting frame9768 CMRO basic installation kitMandatoryHardware architecture and functionality Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-14 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
PowerItem Description UseCable assembly (AC) forNAR market3x16AWGPower connector assembled with thepower cable. Available in fourlengths: 2 m, 4.5 m, 9 m and 12 mMandatory for 9768 CMRO module withAC powerApplicable to NAR market onlyCable assembly (DC) forNAR market3x16AWGPower connector assembled with thepower cable. Available in fourlengths: 2 m, 4.5 m, 9 m and 12 mRequired for 9768 CMRO module withDC powerApplicable to NAR market onlyPower connector (AC) fornon-NAR marketAC power connector Mandatory for 9768 CMRO module withAC powerApplicable to non-NAR market onlyPower connector (DC) fornon-NAR marketDC power connector Mandatory for 9768 CMRO module withDC powerApplicable to non-NAR market onlyPower cable for non-NARmarketPower cable IN/OUT 3x1,5-mm²Available in 100 m roll or per meterMandatory for 9768 CMRO module withboth AC or DC powerApplicable to non-NAR market onlyGrounding cableItem Description UseGround cable for NAR market Ground cable Y/G, NAR 8AWGLSZHAvailable in any length (in meters)MandatoryApplicable to NAR market onlyGround cable for non-NARmarketGround cable Y/G 10 mm² in 100 mrollMandatoryApplicable to non-NAR market onlySFP modulesItem Description UseSFP module SFP CPRI Rate 3-7 - 1310 nm -SMDF (1 km, 4 km)Optical fronthaul, Daisy chainingSFP module SFP CPRI Rate 3-7 - 1310 nm -SMDF (10 km)Optical fronthaul, Daisy chainingHardware architecture and functionality Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-15FCC FILING FCC FILING
OCTIS connectorItem Description UseOCTIS plug kit for SFPtransceiverOCTIS connector MandatoryOne each for fronthaul and daisy chainingportsProtects SFP and cabling fromenvironmental damage.External RF antennaItem Description UseExternal RF antenna External RF antenna for the 9768CMRO.MandatoryTo be supplied by the customer.Fiber optic cable for fronthaulItem Description UseFiber Optic cable SMDF LC-LC 2SM 1-m MandatorySingle mode fiber duplex.67-mm/250-mm Breakout, Outerdiameter: 5-7-mm, OFNR-LSUse for Single Mode link (select cablelength)Fiber Optic cable SMDF LC-LC 2SM 2.5-mFiber Optic cable SMDF LC-LC 2SM 5-mFiber Optic cable SMDF LC-LC 2SM 15-mFiber Optic cable SMDF LC-LC 2SM 30-mFiber Optic cable SMDF LC-LC 2SM 50-mFiber Optic cable SMDF LC-LC 2SM 70-mFiber Optic cable SMDF LC-LC 2SM 85-mFiber Optic cable SMDF LC-LC 2SM 100-mFiber Optic cable SMDF LC-LC 2SM 150-mFiber Optic cable SMDF LC-LC 2SM 200-mFiber Optic cable SMDF LC-LC 2SM 250-mFiber Optic cable SMDF LC-LC 2SM 300-mHardware architecture and functionality Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-16 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Fiber optic cable for daisy chainingItem Description UseFiber Optic cable SMDF LC-LC 2SM 1-m OptionalSingle mode fiber duplex. 67-mm/67-mmBreakout, Outer diameter: 5-7-mm,OFNR-LSUse for Single Mode link (select cablelength)Fiber Optic cable SMDF LC-LC 2SM 2.5-mFiber Optic cable SMDF LC-LC 2SM 5-mFiber Optic cable SMDF LC-LC 2SM 15-mFiber Optic cable SMDF LC-LC 2SM 30-mFiber Optic cable SMDF LC-LC 2SM 50-mFiber Optic cable SMDF LC-LC 2SM 70-mFiber Optic cable SMDF LC-LC 2SM 85-mFiber Optic cable SMDF LC-LC 2SM 100-mFiber Optic cable SMDF LC-LC 2SM 150-mFiber Optic cable SMDF LC-LC 2SM 200-mFiber Optic cable SMDF LC-LC 2SM 250-mFiber Optic cable SMDF LC-LC 2SM 300-mSolar ShieldItem Description UseSolar Shield Solar Shield for 9768 CMRO Mandatory unless the 9768 CMRO isinstalled indoors or protected in anenclosure.Hardware architecture and functionality Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 2-17FCC FILING FCC FILING
Hardware architecture and functionality Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-18 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
33InstallationOverviewPurposeThis chapter provides the instructions for mounting the Alcatel-Lucent 9768 CompactMetro Radio Outdoor onto either a pole or wall.ContentsInstall the 9768 CMRO on a pole or a wall 3-2Pre-installation information 3-3Installation clearances 3-5Procedure 3-1: Pole mount the 9768 CMRO 3-6Procedure 3-2: Wall-mount the 9768 CMRO 3-11...................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 3-1FCC FILING FCC FILING
Install the 9768 CMRO on a pole or a wallOverviewPurposeThis section provides pre-installation checks for required tools and materials, installationclearances as well as procedures to be performed before installing the Alcatel-Lucent9768 Compact Metro Radio Outdoor product.ContentsPre-installation information 3-3Installation clearances 3-5Procedure 3-1: Pole mount the 9768 CMRO 3-6Procedure 3-2: Wall-mount the 9768 CMRO 3-11InstallationInstall the 9768 CMRO on a pole or a wallOverview........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-2 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Pre-installation informationVerify site preparationThe following site preparation requirements should be checked and met before theinstallation of the equipment can begin:•Ensure that equipment is planned to be installed as high as possible to avoidobstructions.•Consider nearby sources of interference. Also check possibility of future obstructions.•Ensure that adequate clearance is provided for service access.•Ground, power, and fronthaul cabling has been routed and is in place.•Ensure all site-specific fixing materials (screws, washers, wall plugs) for pole or wallmounting the equipment are available.Product delivery contentsUnpack and examine the product packaging contents. If you notice any damage, ormissing items as listed in the Packing List, immediately notify the carrier that deliveredthe unit and contact your Alcatel-Lucent representative.The product packaging contains the following items:•The Alcatel-Lucent 9768 Compact Metro Radio OutdoorInstallation materialsIn addition to the standard product deliverable ensure the appropriate mounting brackets,installation kits, and ancillary items are available to support the product mountingoptions.Figure 3-1 Mounting bracketLocking screw Hinged plateMounting lugsMounting lugsInstallationInstall the 9768 CMRO on a pole or a wallPre-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 3-3FCC FILING FCC FILING
Table 3-1 Recommended wall anchor materialsSurface structure Recommended anchor materials Recommended screw torqueWood Screw Hex T M8x70 stainless steel (x4)Washer plain M8x16x1.6 stainless steel (x4)7.0 N.m (62.0 lb.in).Concrete Screw CHC M6x80 stainless steel (x4)Washer plain M6x12x1.6mm stainless steel (x4)Washer spring M6x12x1.2mm stainless steel (x4)Plug expansion Rawlnut M6x50 (x4)7.0 N.m (62.0 lb.in).Tools required for installationThe following tools are used during installation:•Drill (pneumatic hammer) and assorted drill bits•Pliers•Adjustable spanners•M17 socket wrench•Screwdrivers (power and/or manual):– Phillips (flat blade)– Torx (T-25 and T-40)•HRS (Hirose) HT206/TM21p-88p crimping tool (for RJ45 cable)•Data cable tester for shielded RJ45 (optional)•Measuring tape•Digital compass (to aid establishing product orientation)•Marker, to mark wall mounting holes•Vacuum cleaner or equivalent (required for clearing debris from wall mounting holes)•Spirit level•Hammer•PIB (self-amalgamating) tape and 3M Super 33+ vinyl tape•Ear protectors and safety goggles or glasses•Assorted cable ties (various lengths)•Heavy duty tape•Adjustable strapsInstallationInstall the 9768 CMRO on a pole or a wallPre-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-4 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Installation clearancesMinimum installation clearancesThe following provides the minimum wall mount clearances recommended around theAlcatel-Lucent 9768 Compact Metro Radio Outdoor.CompactMetro RadioOutdoorClearances mm(inches)CommentSides (left andright)400 mm (15.75 inch) Access to secure the solar shield cover.Top 400 mm (15.75 inch) Access to cable connections and cablebending radius.To aid natural air convection.Bottom 400 mm (15.75 inch) To aid natural air convection.Front 460 mm (18.11 inch) Access to secure the solar shield cover.Rear 20 mm (0.79 inch) For the wall mounting space.To aid natural air convection.Figure 3-2 9768 CMRO installation clearancesRear clearance20mm (0.79 inches)Front clearance460mm (18.11 inches)Bottom clearance400mm (15.75 inches)Side clearance400mm (15.75 inches)Top clearance400mm (15.7 5 inches) Side clearance400mm (15.75 inches)InstallationInstall the 9768 CMRO on a pole or a wallInstallation clearances........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 3-5FCC FILING FCC FILING
Procedure 3-1: Pole mount the 9768 CMROPurposeThis topic describes the procedures to be followed when installing the 9768 CMRO ontoa pole using pole bands.PrerequisitesA site survey has been conducted and a location for the device has been selected that isboth central to the public space and elevated in order to maximize coverage. Beforeinstallation begins, ensure the following:•Ensure adequate clearance is provided for service access.•Ground cable has been routed and the site grounding system is in place.•Fronthaul cable has been routed and is in place.•Any site-specific fixing materials are available (for example, bolts, washers and wallplug materials).Attention: The 9768 CMRO must be mounted with the appropriate mountinghardware suitable for the various supporting structures, building materials andconstruction methods. Following a site survey, it is the responsibility of the customerto ensure that:•The installation support structure is adequate and compliant with ICC IBC (2012):International Building Code, and all other national and local codes.•The appropriate mounting hardware and any necessary recommended supportinganchor fixings are used.Mounting requirements and materialsThe 9768 CMRO can be easily mounted onto a wooden or metal pole. Refer to thefollowing for the installation kits, anchor materials, and tools for the installation type:•For pole-mount refer to, Table 2-4, “Pole-mount installation” (p. 2-14) .•For a list of standard tools required to support the installation, see “Tools required forinstallation” (p. 3-4).Before you begin•Record the 9768 CMRO 18-digit serial number before mounting onto a pole.•Ensure that the optic fiber cable and SFPs are inspected and cleaned.InstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-1: Pole mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-6 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Pole mount the 9768 CMROWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof and so on.)follow safe work practices and wear appropriate fall protection equipment.Perform the following procedure to pole-mount the 9768 CMRO using standard polebands....................................................................................................................................................................................................1Assemble the OCTIS connector with the fiber optic cable. Refer to the installationinstructions provided with the OCTIS connector....................................................................................................................................................................................................2Connect the OCTIS connector with the fiber optic to the 9768 CMRO CPRI ports....................................................................................................................................................................................................3Refer to the equipment orientation plan and, at the selected installation point on the pole,mark the upper and lower position of the pole bands. Using digital compass, determinethe planned left or right orientation of the 9768 CMRO mounting bracket around the poleand mark the center line of the left or right orientation on the pole....................................................................................................................................................................................................4Using the supplied stainless steel pole bands insert and thread the open band ends into theupper and lower slots on the reverse side of the mounting bracket....................................................................................................................................................................................................5At the marked installation point on the pole place the bands around the pole at thedetermined height. Carry-out any required adjustment of the mounting bracket around thepole so that it is pointing in the desired direction....................................................................................................................................................................................................6Ensure that the mounting bracket is in the correct position and orientation....................................................................................................................................................................................................7Secure the band around the pole with two loops. Manually tighten the band around thepole....................................................................................................................................................................................................8Slowly tighten the band further to the pole using the BAND-IT®tool, while placing yourfinger at the band buckle bridge to feel the movement of the band through the buckle.InstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-1: Pole mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 3-7FCC FILING FCC FILING
Note: Refer to BAND-IT®C00169 Hand Tool Operation Instructions, PO5886 orwatch the YouTubeTM video (https://www.youtube.com/watch?v=3nLfRYjlnKU)onhow to use the BAND-IT®tool....................................................................................................................................................................................................9Once the band stops moving through the buckle, immediately stop tightening the band.Attention: Excessive tightening of the band around the pole can damage the pole....................................................................................................................................................................................................10 Check whether the banding is secure, there is no movement of the bracket around the poleand that the banding stubs (cut ends) are flattened down with a hammer....................................................................................................................................................................................................11 To attach the 9768 CMRO to the mounting bracket open the mounting frame lever bypulling the lever outwards....................................................................................................................................................................................................12 Align the mounting points on the reverse side of the 9768 CMRO with the mounting lugson the bracket. Attach the 9768 CMRO to the bracket by sliding the 9768 CMROforwards and downwards onto the bracket mounting lugs.Place your finger at thebuckle bridge to feel themovement of the metal bandInstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-1: Pole mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-8 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
...................................................................................................................................................................................................13 Secure the 9768 CMRO onto the mounting frame by tightening the lever retaining screw....................................................................................................................................................................................................14 Finally, check the 9768 CMRO is correctly locked into position and there is no movementof the module on the mounting frame....................................................................................................................................................................................................15 Route the ground cable from the ground system to the 9768 CMRO and Connect theground lug to the grounding point on the 9768 CMRO using the supplied M6 screws, lockwashers, and flat washers. Use antioxidant at the grounding pads.Tighten the leverretaining screwInstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-1: Pole mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 3-9FCC FILING FCC FILING
...................................................................................................................................................................................................16 Connect the external RF antennas to the mini-DIN 4.3-10 RF antenna connectors on thebottom of the 9768 CMRO. Refer to the RF antenna mounting instructions included withthe RF antenna kit for the steps to mount the antennas....................................................................................................................................................................................................17 If required, assemble the AC or DC power connector with the power cable. If the powerconnector is already assembled with the power cable, skip this step....................................................................................................................................................................................................18 Plug the power connector on the power cord into the power connector on the bottom ofthe 9768 CMRO unit....................................................................................................................................................................................................19 Verify that mounted equipment is secure and that no unintentional mechanical alterationhas occurred to either the equipment itself or the installation infrastructure....................................................................................................................................................................................................20 Ensure that all the exterior connections are secure....................................................................................................................................................................................................21 Finally, inspect the site for loose tools, materials, and parts. Remove all such loose tools,materials, and parts.Standard pole-mount examplesThe following figure depicts a 9768 CMRO standard pole mount using pole bands.InstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-1: Pole mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-10 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILINGEND OF STEPS...................................................................................................................................................................................................
Procedure 3-2: Wall-mount the 9768 CMROPurposeThis topic describes the procedures to be followed when installing the 9768 CMRO ontoa wall or solid flat surfacePrerequisitesA site survey has been conducted and a location for the device has been selected that isboth central to the public space and elevated in order to maximize coverage. Beforeinstallation begins, ensure the following:•Ensure that adequate clearance is provided for service access.•Ground cable has been routed and the site grounding system is in place.•Fronthaul cable has been routed and is in place.•All site-specific fixing materials are available (for example, bolts, washers, and wallplug materials).Attention: The 9768 CMRO must be mounted with the appropriate mountinghardware suitable for the various supporting structures, building materials andconstruction methods. Following a site survey, it is the responsibility of the customerto ensure that:•The installation support structure is adequate and compliant with ICC IBC (2012):International Building Code, and all other national and local codes.•The appropriate mounting hardware and any necessary recommended supportinganchor fixings are used.Mounting requirements and materialsThe 9768 CMRO can be easily mounted onto solid concrete or wooden flat surface. Referto the following for the installation kits, anchor materials, and tools for the installationtype:•For wall mount, refer to Table 2-5, “Wall-mount installation” (p. 2-14) .•For a list of standard tools required to support the installation, see “Tools required forinstallation” (p. 3-4).Before you begin•Record the 9768 CMRO 18 digit serial number before mounting onto a wall or flatsurface.•Ensure that the optic fiber cable and SFPs are inspected and cleaned.InstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-2: Wall-mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 3-11FCC FILING FCC FILING
Wall-mount the 9768 CMROWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof and so on) followsafe work practices and wear appropriate fall protection equipment.NOTICEEquipment damage hazardDamaged connectors may lead to operational issues.The 976x Metro product must be transported by holding its body and not by anyconnectors or pre-attached cables.Perform the following procedure to wall-mount the 9768 CMRO to a wall or flat surface....................................................................................................................................................................................................1Assemble the OCTIS connector with the fiber optic cable. Refer to the installationinstructions provided with the OCTIS connector....................................................................................................................................................................................................2Connect the OCTIS connector with the fiber optic to the 9768 CMRO CPRI ports....................................................................................................................................................................................................3At the selected installation location, mark the points on the wall for the mounting bracketanchor holes. See the following drill hole pattern for reference:...................................................................................................................................................................................................4Check the horizontal marked position of the holes with a spirit level....................................................................................................................................................................................................5Drill two upper holes and two lower holes at the marked points to the appropriate depth.Insert screw anchor plugs into the drilled holes and, using a hammer, tap home until theplugs are flush with the wall....................................................................................................................................................................................................6Align the mounting bracket bolt holes with the drilled wall anchor holes. Screw in theupper and lower bolts into the wall fixings to the appropriate depth so that the mountingbracket is securely attached to the wall.InstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-2: Wall-mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-12 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
...................................................................................................................................................................................................7To attach the 9768 CMRO to the mounting bracket open the mounting frame lever bypulling the lever outwards....................................................................................................................................................................................................8Align the mounting points on the reverse side of the 9768 CMRO with the mounting lugson the bracket. Attach the 9768 CMRO to the bracket by sliding the 9768 CMROforwards and downwards onto the bracket mounting lugs....................................................................................................................................................................................................9Secure the 9768 CMRO onto the mounting frame by tightening the lever retaining screw....................................................................................................................................................................................................10 Finally, check the 9768 CMRO is correctly locked into position and there is no movementof the module on the mounting frame....................................................................................................................................................................................................11 Route the ground cable from the ground system to the 9768 CMRO and Connect theground lug to the grounding point on the 9768 CMRO using the supplied M6 screws, lockwashers, and flat washers. Use antioxidant at the grounding pads....................................................................................................................................................................................................12 Connect the external RF antennas to the mini-DIN 4.3-10 RF antenna connectors on thebottom of the 9768 CMRO. Refer to the RF antenna mounting instructions included withthe RF antenna kit for the steps to mount the antennas....................................................................................................................................................................................................13 If required, assemble the AC or DC power connector with the power cable. If the powerconnector is already assembled with the power cable, skip this step....................................................................................................................................................................................................14 Plug the power connector on the power cord into the power connector on the bottom ofthe 9768 CMRO unit....................................................................................................................................................................................................15 Verify that mounted equipment is secure and that no unintentional mechanical alterationhas occurred to either the equipment itself or the installation infrastructure....................................................................................................................................................................................................16 Ensure that all the exterior connections are secure.InstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-2: Wall-mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements 3-13FCC FILING FCC FILING
...................................................................................................................................................................................................17 Finally, inspect the site for loose tools, materials, and parts. Remove all such loose tools,materials, and parts.Standard wall mount exampleThe following figure depicts a standard 9768 CMRO wall-mount installation.InstallationInstall the 9768 CMRO on a pole or a wallProcedure 3-2: Wall-mount the 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-14 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILINGEND OF STEPS...................................................................................................................................................................................................
Appendix A: LED StateDescriptionOverviewPurposeThis appendix describes the LED status and descriptions for the Alcatel-Lucent 9768Compact Metro Radio Outdoor (9768 CMRO).ContentsLED Status for 9768 CMRO A-2...................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements A-1FCC FILING FCC FILING
LED Status for 9768 CMROOverviewThis topic describes the LED status and descriptions for the 9768 CMRO.LED interpretation tableOn the back lower portion of the Alcatel-Lucent 9768 Compact Metro Radio Outdoor, asingle visible LED provides local diagnostic indications. Note: LEDs can be used fordebugging purposes during installation and commissioning. They are not intended for useduring normal operation of the equipment.Table A-1 LED interpretationsLED Status LED descriptionOff No power supplied No AC, no DC power (dead unit).Red Initial power On The unit is initializing.Flash red External power supply failure AC or DC input power feed is out of range.Flash yellow Software download The unit is downloading software and RFtransmission is off, but is currentlyoperational.Solid red Non-recoverable critical failure A critical hardware failure prevents either thetransmit path or the active receive paths (or allpaths) from functioning.Figure A-1 LED indicatorLED indicator9768 CMRO(rear view)LED State Description LED Status for 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................A-2 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Table A-1 LED interpretations (continued)LED Status LED descriptionFlash red Recoverable critical failure The unit is not currently operational due tohardware fault, but should recover (forexample, Under-Temperature Warm-Up orOver- Temperature Critical Shut-down).Solid yellow Slave CPRI link failure The slave CPRI link has failed.Solid red Non-critical non-recoverable failure Non-critical fault (other than antenna)detected, fault is not recoverable, transmissionis still on.Flash red Non-critical recoverable failure Non-critical fault (other than antenna)detected, fault is recoverable, transmission isstill on.Solid green Normal operation No critical failures or faults, transmission isenabled.Flash green Stand-by No critical failures or faults, the transmitter isdisabled.Statuses for which no LED illuminatesno LED External Antenna failure An equipped antenna has a VSWR fault.no LED Background software download A background software download is inprogress, RF is currently enabled.LED State Description LED Status for 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements A-3FCC FILING FCC FILING
LED State Description LED Status for 9768 CMRO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................A-4 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Appendix B: Productconformance statementsOverviewPurposeThis section presents the product conformance statements that apply to the Alcatel-Lucent9768 Metro Radio Outdoor product.The statements that are required are determined primarily by national or multi-nationalregulations. However, in some regions, contract terms determine which statements arerequired.The presence of the statement indicates that the product does comply with that statementwherever it is required to do so.ContentsUnited States compliance B-2Federal Communications Commission B-3Product safety conformance statements B-5Antenna exposure statements B-6FDA/IEC optical transmitter product compliance statements B-7Eco-environmental statements B-8...................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements B-1FCC FILING FCC FILING
United States complianceIntroductionPurposeThe statements that follow are the product conformance statements that apply to theAlcatel-Lucent 9768 Metro Radio Outdoor Product when deployed in the United States.ContentsFederal Communications Commission B-3Product safety conformance statements B-5Antenna exposure statements B-6FDA/IEC optical transmitter product compliance statements B-7Eco-environmental statements B-8Product conformance statementsUnited States complianceIntroduction........................................................................................................................................................................................................................................................................................................................................................................................................................................................................B-2 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Federal Communications CommissionFederal Communications CommissionImportant! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.FCC Part 15 Class BNote: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna•Increase the separation between the equipment and receiver•Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected•Consult the dealer or an experienced radio/TV technician for help.FCC Part 68This equipment complies with Part 68 of the FCC rules and the requirements adopted bythe ACTA. At the upper-right-hand corner inside the cabinet assembly of this equipmentis a label that contains, among other information, a product identifier in the format ofAAAEQ##TXXXX. If requested, this number must be provided to the telephonecompany.FIC 04DU9-1SN.Product conformance statementsUnited States complianceFederal Communications Commission........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements B-3FCC FILING FCC FILING
SOC 6.0NThe T1 network interface on this equipment is hardwired to a punchdown block, whichmeets the FCC specifications.If this equipment causes harm to the telephone network, the telephone company willnotify you in advance that temporary discontinuance of service may be required.However, if advance notice is not practical, the telephone company will notify thecustomer as soon as possible. Also, you will be advised of your right to file a complaintwith the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations, orprocedures that could affect the operation of the equipment. If this happens, the telephonecompany will provide advance notice in order for you to make necessary modifications tomaintain uninterrupted service.FCC regulations prohibit the connection of customer-provided equipment to central officeimplemented systems. Connection to party lines is subject to tariffs; users should contacttheir state public utility commission, public service commission, or corporationcommission for information.If the equipment is causing harm to the telephone network, the telephone company mayrequest that you disconnect the equipment until the problem is resolved.If trouble is experienced with this equipment repair or warranty information may beobtained by contacting:Technical Support Services, within the United States: +1 630 224 4762, prompt 2Product conformance statementsUnited States complianceFederal Communications Commission........................................................................................................................................................................................................................................................................................................................................................................................................................................................................B-4 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Product safety conformance statementsProduct safety conformanceThe Alcatel-Lucent 9768 Metro Radio Outdoor is Safety Certified ITE by CSAInternational.This Certification is marked on the equipment main nameplate label. Should the localAuthority Having Jurisdiction (AHJ) require prior or additional verification of thisCertification, a Product Certificate of Compliance can be obtained from the specificCertification Body by the Business/Product Unit Applicant for the product or bycontacting:Technical Support Services, within the United States: +1 630 224 4762, prompt 2Any modifications to this equipment are not permitted without review and official writtenauthorization from the specific Certification Body. Unauthorized changes may violate theProduct Safety Certification. Modifications or changes authorized by official CN/CNNare assumed to have received prior approval from this Lab.Indoor applicationsThis equipment is intended for installation in restricted access locations where access iscontrolled or where access can only be gained by service personnel with a key or tool.Access to this equipment is restricted to qualified service personnel only.Product conformance statementsUnited States complianceProduct safety conformance statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements B-5FCC FILING FCC FILING
Antenna exposure statementsAntenna exposureAntenna installations for the Alcatel-Lucent 9768 Metro Radio Outdoor product will beperformed in accordance with all applicable manufacturer's recommendations, andnational laws and regulations. To ensure correct antenna installation, the antenna installerwill perform all necessary calculations and/or field measurements to evaluate compliancewith applicable national laws or regulations regarding exposure to electromagnetic fields.The supplier of radio equipment, the supplier of antenna equipment and the integrator andbuilder of the site must provide sufficient information so that the limits of the exclusionzones can be determined. Any changes to the antenna or other equipment in the transmitpath may require re-evaluation of the exposures to electromagnetic fields.Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, allinstallations must be evaluated for requirements contained in Table 1, “Limits formaximum permissible exposure,” in section 1.1310.Product conformance statementsUnited States complianceAntenna exposure statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................B-6 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
FDA/IEC optical transmitter product compliance statementsFDA/IEC optical transmitter product complianceAlcatel-Lucent declares that this equipment complies with the Food and DrugAdministration’s Center for Devices and Radiological Health (FDA/CDRH) regulations21 CFR 1040.10 and 1040.11. It is a Class I/1 laser optical fiber communication systems“product” under the FDA.This Product is designed to ensure that personnel operating the product are notendangered by laser radiation during normal operation and fault conditions. This productdoes not present a risk of eye injury because it is fully enclosed and does not containembedded lasers greater than Class I/1 unless otherwise noted.Laser warningWARNINGUse of controls or adjustments or performance of procedures other than those specifiedherein may result in hazardous laser radiation exposure.Do not view directly into the laser beam with optical instruments such as a fibermicroscope because viewing of laser emission in excess of Class 1 limits significantlyincreases the riskof eye damage.Never lookinto the end of an exposed fiber or an open connector as long as the opticalsource is switched on.Ensure that the optical source is switched off before disconnecting optical fiberconnectors.Laser hazardProduct conformance statementsUnited States complianceFDA/IEC optical transmitter product compliance statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements B-7FCC FILING FCC FILING
Eco-environmental statementsPackaging collection and recovery requirementsCountries, states, localities, or other jurisdictions may require that systems be establishedfor the return and/or collection of packaging waste from the consumer, or other end user,or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for thereturn and/or collection of the packaging waste may be established.For more information regarding collection and recovery of packaging and packagingwaste within specific jurisdictions, contact the Alcatel-Lucent Environment, Health andSafety organization or Alcatel-Lucent Hazardous Waste Center technical support at (888)539-2783.For installations not performed by Alcatel-Lucent, please contact the Alcatel-LucentCustomer Support Center at:Technical Support Services, within the United States: +1 630 224 4762, prompt 2Material content complianceThe following notification applies to Alcatel-Lucent products distributed for sale, resale,or use.This product, part, or both may include a lithium-manganese dioxide battery, whichcontains very small amounts of a perchlorate substance. Special handling may apply.For California:Perchlorate Material - special handling may apply.See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.Product conformance statementsUnited States complianceEco-environmental statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................B-8 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
GlossaryThis glossary provides a quick reference to the terms, acronyms, and abbreviations commonlyused in the Alcatel-Lucent Metro product documentation....................................................................................................................................................................................................................................Numerics3GThird Generation3GPP3rd Generation Partnership ProjectA collaboration between groups of telecommunications associations for the promotion andstandardization of high-speed cellular services.5620 SAM5620 Service Aware Manager9952 WPS9952 Wireless Provisioning System...................................................................................................................................................................................................................................A A (Ampere)Base SI unit of electrical current.SI is the International System of Units (abbreviated SI from French: Le Système internationald'units).A-GPSAssisted Global Positioning SystemAAAAuthentication, Authorization, and AccountingACAccess ClassAC (Alternating Current)Continuously variable current, rising to a maximum in one direction, falling to zero, thenreversing direction and repeating the cycle in the other direction.....................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-1FCC FILING FCC FILING
AC convenience outletSites must be equipped with at least two duplex outlets for installation and maintenanceprocedures. The outlets are required to power test equipment and installation tools.ACF (AC Fail)The AC Fail (ACF) alarm indicates that AC input to one or more rectifiers in the power plant isabsent or outside of the operating range of the equipmentACLRAdjacent Channel Leakage power RatioAHJThe agency or authority having jurisdiction. Article 100 of the National Electrical Code (NEC) forthe United States defines AHJ with greater specificity, stating that it may be a federal, state, localgovernment, or individual such as a fire chief, fire marshal, chief of a fire prevention bureau,labor department or health department, building official or electrical inspector, or others havingstatutory authority. In some circumstances, the property owner or his/her agent assumes the roles,and at government installations, the commanding officer or departmental official may be the AHJ.Ambient temperatureThe temperature of air or other media in a designated area, particularly the areaANRAutomatic Neighbor RelationANSI (American National Standards Institute)An organization chartered to accredit standards developed by a wide variety of industry groups,without influence from any one company or organization. Does not develop standards, butreviews and implements standards developed by other organizations. ANSI is a member of theInternational Standards Organization (ISO).AntennaAn elevated device for radiating or receiving radio waves. It changes electrical currents intoelectromagnetic waves, and conversely, electromagnetic waves into electrical currents.APAccess PointAP (Application Processor)Network element located at the MSC which provides the radio control logic for managing calls.The AP is a general-purpose computer that can host a number of RCS virtual machines.AWG (American Wire Gauge)American standard for classifying wire diameter....................................................................................................................................................................................................................................B backhaulThe portion of the network connecting the base band unit (BBU) to the mobile core network.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-2 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
BackupFacility used to replace an element which has failed.Base stationThe equipment that provides the air interface that allows mobile terminals to communicate withthe telecommunications network.BBUBaseBand UnitBD (Battery on Discharge, first stage)The Batteries on Discharge (BD) alarm indicates the power system output voltage has decreasedbelow the “batteries on discharge” threshold set point. The “batteries on discharge” threshold isset for 50.0 V (for -48-VDC systems) or 25.0 V (for +24-VDC systems).BD-2 (Battery on Discharge-2)The Batteries on Discharge (BD-2) alarm indicates the power system output voltage has decreasedbelow the “batteries on a second discharge” threshold set point. The “batteries on a seconddischarge” threshold is set for 44.0 V (for -48-VDC systems) or 22.0 V (for +24-VDC systems).BOCABuilding Officials and Code AdministratorsBondingPermanent connection of metallic parts to form an electrically conductive path that assureselectrical continuity and has the capability to safely conduct any current likely to be imposed.Branch circuitThe circuit conductors between the final overcurrent device protecting the circuit and the outlet.Breaker, circuitA cut-out device which breaks a circuit when preset limits of current are exceeded.Buried cableA communication cable manufactured or produced for the purpose of burial in direct contact withthe earth.Buried ring groundA buried, bare, tinned, solid copper cable encircling the site building and/or tower foundation.Bus barOne or more conductors that serves as a common connection for a group of related devices.Busy hourThe uninterrupted period of 60-min for which the average intensity of traffic is at maximum.BWBandwidthGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-3FCC FILING FCC FILING
...................................................................................................................................................................................................................................C Cable runReferring to cable routing.Cable sweep(See Sweep)CAN/CSACanadian Standards Association. See http://www.csa.ca (http://www.csa.ca).CDRHCenter for Devices and Radiological HealthCEConformité EuropéeneA CE Marking on a product is a declaration from the manufacturer that the product complies withthe essential requirements of the relevant European health, safety, and environmental protectionlegislation.Cell siteAn installation located within a cell that houses the equipment needed to set up and complete callson a cellular telephone.CFRCode of Federal Regulations.Among these regulations, Title 47, “Telecommunication,” conveys the rules of the FCCcompanies operating networks in the USA. See also FCC.CIC (Customer Information Center)Source for locating and obtaining delivery of Alcatel-Lucent customer documents.Circuit1. The complete path between two terminals over which one-way or two-way communicationsmay be provided. 2. An electronic path between two or more points, capable of providing anumber of channels. 3. A number of conductors connected together for the purpose of carrying anelectrical current. 4. An electronic closed-loop path among two or more points used for signaltransfer. 5. A number of electrical components, such as resistors, inductances, capacitors,transistors, and power sources connected together in one or more closed loops.CISPRThe [special] international committee on radio interference. Its publication CISPR 22, InformationTechnology Equipment—Radio Disturbance Characteristics—Limits and Methods ofMeasurement addresses any device that emits RF outside the scope of its intended purpose.CLICommand Line InterfaceGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-4 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
CMASCommercial Mobile Alert SystemCMSCertificate Management SystemCN/CNNArcane term for changes notices that affect Alcatel-Lucent products.Coaxial cableA cable with one or more coaxial pairs under one outer sheath. The cable consists of a centerconductor surrounded by an insulating material and a concentric outer conductor.ConfigurationAn arrangement of functional units according to their nature, number, and chief characteristics.Controlled environmentAn indoor location in which temperature, humidity, and ventilation are maintained at specificlevels.CoreA subset of generic requirements published by Telcordia Technologies. See also GR. The Corerequirements that affect the Metro product (Radio/Cell) concern spurious emissions, surges fromlightning, and resistance to wind, wind-driven rain, salt fog, and extreme ambient temperature.CPCCircular Plastic ConnectorCPRICommon Public Radio InterfaceCSCircuit SwitchedCSAConvergent Security AssetCSA (Canadian Standards Association)An independent, non-government, not-for-profit association for the development, by consensus,of Canadian standards and product certifications.CSC (Cell Site Configuration)Sheets provided in this document for documenting cell site configuration, conditions, and otherpertinent information for reference during product deployment, and future additions.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-5FCC FILING FCC FILING
...................................................................................................................................................................................................................................D d2Udigital 2U-height box.The BBU system supporting two controller and two modems. See also BBU.dB (decibel)A unit which expresses the ratio of two voltages, currents, or powers. Decibel (dB) is used tospecify transmission loss, gain, or relative level. Decibel (dB) equal to 20 times the commonlogarithm of the ratio of two voltages or two currents, or 10 times the common logarithm of theratio of two powers.dBi (decibels (dB) relative to isotropic)Decibels relative to an isotropic antenna gain at radio frequencies.Antenna gain is defined as the ratio of the power produced by the antenna from a far-field sourceon the antenna's beam axis to the power produced by a hypothetical lossless isotropic antenna,which is equally sensitive to signals from all directions. Usually this ratio is expressed in decibels,and these units are referred to as "decibels-isotropic" (dBi).DC (Direct Current)Current flow in one direction.DFSDynamic Frequency SelectionDHCPDynamic Host Configuration ProtocolDiversityA method of radio transmission and/or reception, which counteracts the effects of fading bycombining several signals all bearing the same information.DLDownlinkDNSDomain Name SystemDoSDenial of ServiceDown conductorA vertical conductor of low impedance that connects the cell site grounding electrode system tothe grounding electrode system.Driven ground rodA copper-clad steel or stainless steel rod, a minimum of 2.4 m (8 f) long and 5/8-in diameter.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-6 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
DRXDiscontinuous ReceptionDSCPDifferentiated Services Code Point...................................................................................................................................................................................................................................EE1A four-wire voice and data trunking facility that carries 30 duplex channels in 64-kbps time slices.E1 facilities are commonly used in countries outside of North America.Earthquake zoneSeismic ratings ranging from zone 1 (relatively low central office operational shock and vibrationlevels) to the most severe zone 4 levels. Equipment must be able to withstand earthquake zonerequirements under both operational and non-operational conditions.ECIDEnhanced Cell IDEEC directiveA law enacted by the European Union for enforcement by its Common Market. The terms of sucha law have been used as a point of reference against which to compare the intentional RFemissions of the MRO.EIRPEffective Isotropic Radiated PowerElectrolytic ground electrode (rods)A low resistance grounding rod (pipe) using low resistivity materials.EMSElement Management SystemESDElectrostatic discharge.A hazard that electronic equipment such as the Metro Cell or Metro Radio can suffer by way ofexposure to static electricity or proximity to something that has no connection to ground.ETSIEuropean Telecommunications Standards InstituteEUEuropean UnionExothermic weldA method of making electrical connections of copper to copper or copper to steel using hightemperature fusion. The molten copper flows over conductors in a mold, melting, and weldingthem together.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-7FCC FILING FCC FILING
...................................................................................................................................................................................................................................F FA (Fuse Alarm)The fuse alarm (FA) indicates that the power system battery and load protection fuse opens.FacilityAny element of physical telephone equipment needed to provide service, such as cables,switching systems, and microwave radio transmission systems.FCC (Federal Communications Commission)A group founded in 1934 to regulate all types of communications in the United States.FDAFood and Drug AdministrationFDDFrequency Division DuplexFloatTo operate a power load on a main-driven rectifier in parallel with a low impedance storagebattery, which is kept fully charged by the rectifier and is itself only called upon to provide powerduring temporary and short-duration peaks for which the rectifier output is insufficient.FMFault ManagementFQDNFully Qualified Domain NameFrequencyFor a periodic wave, such as alternating current, the number of complete cycles per unit of time.The unit of frequency is cycles per second, or hertz.fronthaulThe common public radio interface (CPRI) connection between a standalone remote radio head(for example: 9768 MRO, 9768 CMRO) and the base band unit (BBU).FRUField Replaceable UnitFull AXSCable connector used for CPRI connection to the Metro product (Radio/Cell).FuseAn overcurrent protective device that has as its critical component a metal wire or strip that meltswhen heated by a prescribed (design) amperage, creating an open in the circuit of which it is apart, protecting the circuit from an overcurrent condition.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-8 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
...................................................................................................................................................................................................................................GGAGeneral AvailabilityGainThe ratio of output current, voltage, or power to input current, voltage, or power, respectively.Gain is measured in dB. If the ratio is less than unity, the gain, expressed in dB, will be negative,in which case there is a loss between input and output.Garmin 45XLSA handheld GPS receiver that can be used to verify GPS reception at a cell site. It has a removableantenna and provides +5 VDC on the center pin of the RF connection to power external activeantennas. If poor GPS reception is suspected, the Garmin 45XLS can be used to verify that theGPS antenna and cable system is working acceptably. It also verifies whether the GPS antennalocation is acceptable.GE (Gig-E, GBE)Gigabit EthernetGFCI (Ground Fault Circuit Interrupter)A device intended for protection of personnel that functions to de-energize a circuit or portionthereof within an established period when a current to ground exceeds some predetermined valuethat is less than that required to operate the overcurrent protective device of the supply circuit.GHzGigaHertzGLONASSGLONASS is an acronym, which stands for Globalnaya Navigazionnaya Sputnikovaya Sistema,or Global Navigation Satellite System. GLONASS is a satellite navigation system operated by theRussia.GNSSGlobal Navigation Satellite SystemGPONGigabit Passive Optical NetworkGPRSGeneral Packet Radio ServicesGPS (Global Positioning System)A system of 24 satellites that provides, among other things, accurate timing information to the cellsites.GRGeneric requirements published by Telcordia Technologies. See also Core.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-9FCC FILING FCC FILING
GroundA conducting connection between equipment or an electrical circuit and earth, or conductive bodythat is used in place of earthGrounding conductorA conductor used to connect equipment or a grounded electrical circuit to the grounding electrodesystem.Grounding electrode systemThe conductive objects that are intentionally bonded to furnish connection to earth (that is, buriedring ground with ground rods, electrically continuous buried metallic water pipe, electrolyticground electrode, and so on).GTPGPRS Tunneling ProtocolGUIGraphical User InterfaceGuySteel wire or rope used to hold a pole upright....................................................................................................................................................................................................................................H HandoffAn automatic transfer of a cellular telephone call from one cell to another, maintaining call qualityas the mobile user moves through the coverage area.HDMHome Device ManagerHeat dissipationThe heat generated by cabinets during operation.HPBWHalf Power BeamwidthHSDPAHigh-Speed Downlink Packet AccessHSPAHigh-Speed Packet AccessHSUPAHigh-Speed Uplink Packet AccessHTTPHypertext Transfer ProtocolGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-10 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
HVHigh VoltageHVAC (Heating, Ventilation, Air Conditioning)Hz (hertz)A unit of frequency of a periodic process equal to one cycle per second....................................................................................................................................................................................................................................II2CInter-integrated CircuitICNIRPInternational Commission for Non-Ionizing Radiation ProtectionIECInternational Electrotechnical Commission. The Metro products comply with numerous standardsthat this independent body has propagated.IEEEInstitute of Electrical and Electronics EngineersIndoor siteInstallation site in a controlled environment, allowing the use of indoor cabinets.INTR (Intrusion Alarm)The Intrusion (INTR) alarm indicates a door or access panel to the power system is open.IPInternet ProtocolIPsecInternet Protocol SecurityIPx5The subset of the standard IEC 60529 to which the Metro product (Radio/Cell) conforms in itsresistance to intrusion by water. Conformance to this subset means that the Metro product(Radio/Cell) withstands a 3-min test of 12.5 L/min at 30 kN/m2from 3 meters away.IRCInterference Rejection CombiningISMIndustrial, Scientific, and MedicalITIn an IT earthing system, the electrical distribution system has no connection to earth at all, or ithas only a high impedance connection. In such systems, an insulation monitoring device is used toGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-11FCC FILING FCC FILING
monitor the impedance....................................................................................................................................................................................................................................L LANLocal Area NetworkLCA small connector that terminates a fiber optic cable and snaps into its mate.LEDlight emitting diodeLMTLocal Maintenance TerminalLoadThe power consumed by a device or circuit in performing its function.LossThe diminution measured in dB, of signal level in a communications medium. The powermeasured in watts, consumed by a circuit or component. The energy dissipated withoutaccomplishing useful work or purpose.lR / LR (lightRadio™)The Alcatel-Lucent lightRadio™family of wireless products.LTELong Term EvolutionLVLow Voltage...................................................................................................................................................................................................................................M MAC (address)Media Access Control AddressA MAC address is a hardware identification number that uniquely identifies each device on anetwork.MAC (protocol)Medium Access Control ProtocolThe media access control (MAC) data communication protocol is a sublayer of the data link layer.MAC protocol provides addressing and channel access control mechanisms that make it possiblefor multiple terminals or network nodes to communicate within a multiple access network thatincorporates a shared medium, for example, Ethernet.MCIMetro Cell IndoorGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-12 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
MCOMetro Cell OutdoorMFBIMultiple Frequency Band IndicatorsMGB (Main Ground Bus)A copper bus bar used to provide the electrical interfaces for connection of the isolated groundplane to the integrated ground system.MHz (Megahertz)Reference of radio frequency spectrum of one-million cycles.MIMOmultiple input, multiple outputAn antenna technology for wireless communications in which multiple antennas are used at boththe source (transmitter) and the destination (receiver).MMEMobility Management EntityMOP (Method of Procedure)Cell site walk-through where site preparation activities are verified prior to installing the 9412eNodeB Compact equipment.MROMetro Radio OutdoorMSC (Mobile Switching Center)In an automatic cellular mobile system, the interface between the radio system and the publicswitched telephone network. The MSC performs all signaling functions that are necessary toestablish calls to and from mobile stations.MSPMobile Service ProviderMSPmobile service providerMTBFMean Time Between FailuremWmilliWattGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-13FCC FILING FCC FILING
...................................................................................................................................................................................................................................N NARNorth American RegionNEC (National Electric Code)Standard that governs the use of electric wire, cable, and fixtures, and electrical and opticalcommunication cable installed in buildings.NEMNetwork Element ManagerNEMANational Electrical Manufacturers Association. The Metro product (Radio/Cell) qualifies as aNEMA 250-2008 standard Type 4 enclosure with respect to intrusion of dust and wind-drivenrain.NetworkA set of terminals, the communications link that joins them, and the protocols that allow them tofunction together and communicate with each other.NFPA (National Fire Protection Association)Standards and code writing organization made up of volunteer industrial and institutionalsubject-matter-expert committees.NG-SECNext Generation SecurityNIU (Network Interface Unit)A device that performs interface functions, such as code conversion, protocol conversion, andbuffering, required for communications to and from a network. The device is used primarilywithin a local area network to allow a number of independent devices, with varying protocols, tocommunicate with each other. An NIU converts each device protocol into a common transmissionprotocol. The transmission protocol can be chosen to accommodate directly a number of thedevices used within the network without the need for protocol conversion for those devices by theNIU.NominalSpecified value or intended value independent to any uncertainty in its realization. In a device thatrealizes a physical quantity, it is the value of such a quantity specified by the manufacturer.Non-Alcatel-Lucent power3rd- party power systems, or power systems other than Alcatel-Lucent.NSPNetwork Services PlatformGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-14 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
...................................................................................................................................................................................................................................O OAM (OA&M)Operations, Administration, and MaintenanceOFDMOrthogonal frequency-division multiplexing, the multi-carrier modulation scheme that overcomesmany commonly experienced wireless communications problems, such as multipath and signalattenuation.OLCSOnline Customer SupportOOTOut Of Time alignmentOPSOn-Path SupportOSPOutside PlantOSSOperation Support SystemOTDOAObserved Time Difference Of Arrival...................................................................................................................................................................................................................................P P-GWPacket Data Network GatewayPair cableCable made up of one or more separately insulated wire pairs, none of which is arranged withanother quads.PCIPhysical Cell IDPDPowered DevicePDCPPacket Data Convergence Protocol, which provides security to both the air interface and the fiberoptic interface of the MRO by compressing and decompressing the IP headers, as specified in theUMTS protocol stack.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-15FCC FILING FCC FILING
PDUPower Distribution UnitPhaseThe number of separate voltage waves in commercial alternating current, designated as "singlephase", "three-phase", and so on.PigtailA short length of electrical conductor permanently affixed to a component, used to connect thecomponent to another.PMPerformance ManagementPMJConditions that affect service of the power system and/or require immediate attention areclassified as major alarms and designated as Power Major (PMJ) alarms.PMNConditions requiring service, but having no immediate affect on the power system output areclassified as minor alarms and designated as Power Minor (PMN) alarms.PnPPlug and PlayPoEPower over EthernetPVC (Polyvinyl Chloride)A thermoplastic made of polymers, which is tough, nonflammable, and water resistant and is usedas an insulation....................................................................................................................................................................................................................................Q QAMQuadrature Amplitude ModulationQoEQuality Of ExperienceQoSquality of service...................................................................................................................................................................................................................................R RadiallThe proprietary name of an enterprise that produces components for device interconnections.These components include the R2CT weatherized connector kit by which the Metro Radioinstaller retrofits the LC fiber optic connector on the fronthaul cable to the SFP port module of theGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-16 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
Metro Radio. The proper name of this company is Radiall USA, Inc. See also SFP.RANRadio Access NetworkRDCResidual Current DeviceReceive-onlyPertaining to a device or a mode of operation capable of receiving messages, but not transmittingmessages.RFRadio FrequencyRFOAReady for First Office ApplicationRMS (Root Mean Square)Effective value of an alternative wave. For AC, RMS is numerically equal to DC value of thecurrent with the same heating affect.RoHSRestriction of Hazardous Substances regulationRoWRest of WorldRRHRemote RF head consisting of a radio, a receive filter, a transmit amplifier, and a CPRI link to aBBU. The MRO is an RRH. See also BBU and CPRI.Rx/RXReceive...................................................................................................................................................................................................................................S S-GWServing GatewaySAR (Specific Absorption Rate)A measure of the rate at which energy is absorbed by the body when exposed to radio frequencyenergy.SCMSSmall Cell Management SystemSectorThe coverage area within the degree of directionality of the antennas.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-17FCC FILING FCC FILING
SeGWSecurity GatewayService providerCustomer who purchases switching and Site equipment from system vendors, which, in turn, isprovided to end-user subscribers through resellers and distribution channels.SFP (Small Form-Factor Pluggable)A compact, hot-pluggable transceiver that interfaces a network device motherboard to afiber-optic or copper networking cable to support telecommunication and data communications.SGMIISerial Gigabit Media Independent InterfaceShieldA housing, screen, sheath, or cover that substantially reduces the coupling of electric, magnetic, orelectromagnetic fields into or out of circuits or transmission lines.Short-termNo more than 96 consecutive hours or 15 days per year.SIMOSingle input, multiple output. Its transmitter function uses a one antenna, and its receiver functionuses two. This scheme reduces the instance of multipath and fading, in particular. Antonyms areMISO (multiple input, single output) and MIMO (multiple input, multiple output).Single-phaseA circuit in which there is only one sinusoidal voltage variation.SiteAn installation that houses the equipment needed to set up and complete calls on a cellulartelephone.Site preparationTo perform the requirements necessary at the site before installation can begin.SLAService Level AgreementSMGSystem Management SolutionSONSelf-Organizing NetworkSpecific siteThe spot where the Metro product is installed in the venue. See also Venue.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-18 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
SSIDService Set IdentifierStrandedWires twisted together to form a strong flexible cable.Surge protectorProtective device used to limit surge voltages by discharging or bypassing any unwanted surgecurrent that may enter a building or equipment.SWSoftwareSweepTo vary the frequency of a signal over a whole band as a means of checking the response ofequipment under test....................................................................................................................................................................................................................................TT1A four-wire voice and data trunking facility that carries 24 duplex channels over 56-kbps timeslots.TCOTotal Cost of OwnershipTHHN (Thermoplastic high-heat resistant nylon-coated)Three-phaseAn alternating current supply with three sinusoidal voltages differing in phase by 120°.THWN (Thermoplastic heat and water resistant nylon-coated)TNIn a TN earthing system, one of the points in the generator or transformer is connected with earth,usually the star point in a three-phase system. The body of the electrical device is connected withearth by means of this earth connection at the transformer.TPCTransmit Power ControlTRDU (Transmit Receive Duplex Unit)TTIn a TT earthing system, the protective earth connection of the consumer is provided by a localconnection to earth, independent of any earth connection at the generator.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-19FCC FILING FCC FILING
Twisted pair cableCable made up of one or more separately insulated twisted-wire pairs, none of which is arrangedwith another to form quads.Tx / TXTransmitTYP (Typical)...................................................................................................................................................................................................................................U U-NIIUnlicensed National Information InfrastructureUBCUniform Building CodeUEUser EquipmentULUplinkUL® (Underwriters Laboratories)Laboratories that test and approve materials and equipment against predetermined performancestandards.UMTSUniversal Mobile Telecommunications SystemUV (Ultraviolet)The portion of the electromagnetic spectrum in which the longest wavelength is just below thevisible spectrum, extending from approximately 4 nm to approximately 400 nm. Some authoritiesplace the lower limit of UV at values between 1 nm and 40 nm, 1-nm being the upper wavelengthlimit of X-rays. The 400-nm limit is the lowest visible wavelength, that is, the highest visiblefrequency, violet....................................................................................................................................................................................................................................V V (Volt)The derived SI unit of electrical potential difference. It is the difference in potential between twopoints of a conducting wire carrying a constant current of 1 A when the power dissipated betweenthese two points is equal to 1 W.Vac (Volts Alternating Current)VCCAn electronics designation that refers to voltage from a power supply connected to the "collector"terminal of a bipolar transistor. Double letters “cc” refer to power supply voltages.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-20 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
VDC (Volts Direct Current)VenueThe general area, such as a stadium, enterprise campus, or airport terminal.VLANVirtual Local Area NetworksVoLTEVoice over LTEVPNVirtual Private NetworkVrms (Volts Root Mean Square)VSWR (Voltage Standing Wave Ratio)In a transmission line, the ratio of maximum to minimum voltage in a standing wave pattern. TheVSWR is a measure of impedance mismatch between the transmission line and its load. Thehigher the VSWR, the greater the mismatch. The minimum VSWR, that is, that whichcorresponds to a perfect impedance match, is unity....................................................................................................................................................................................................................................W W (watts)The derived SI unit of power. It is equivalent to 1 j/s or 1 volt-ampere.W-CDMA / WCDMAWideband Code Division Multiple AccessWalk-throughA critical examination of a design or product undertaken to ensure that it is of adequate quality.WaveformThe characteristic shape of a periodic wave, determined by the frequencies present and theiramplitudes and relative phases.WEEEWaste Electrical and Electronic Equipment regulationWi-FiWireless local area network (WLAN) products that are based on the Institute of Electrical andElectronics Engineers' (IEEE) 802.11 standards. Wi-Fi is a registered trademark of the Wi-FiAlliance.WICLWireless Internet Command LanguageGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements GL-21FCC FILING FCC FILING
WLANWireless local area network (WLAN) products that are based on the Institute of Electrical andElectronics Engineers' (IEEE) 802.11 standards. Wi-Fi is a registered trademark of the Wi-FiAlliance.WMM (9471 WMM)The Alcatel-Lucent 9471 Wireless Mobility Manager (WMM) is the Serving GPRS Support Nodeand Mobility Management Entity (SGSN/MME) in the converged wireless packet core network. Itperforms mobility and session management signaling and packet data switching for GSM,WCDMA, and LTE access networks.WMM®Wi-Fi Multimedia™ (WMM®) is a Wi-Fi Alliance® interoperability certification, based on theIEEE 802.11e standard, providing basic QoS features to 802.11 networks.WMM, is a registered trademark of the Wi-Fi Alliance.WMSWireless Management SystemWPSWireless Provisioning System...................................................................................................................................................................................................................................X x-polCross polarizationGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-22 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING
IndexAAntennaRF antenna, 2-10Authority having jurisdiction(AHJ)definition of, GL-2.............................................................BBasic site requirementsInstallation clearances, 3-5.............................................................CCompact Metro Radio Outdoorconnectors, 2-7Fronthaul, 2-9physical description, 2-4power supply, 2-9product labeling, 2-11RF antenna, 2-10status indicators, 2-11weights and dimensions, 2-4Connectors, 2-7.............................................................DDevice placement, 3-3.............................................................FFronthaul, 2-9.............................................................GGlossaryTerms, acronyms, andabbreviations, GL-1.............................................................HHardware and ancillary items9768 CMRO ancillary items,2-149768 CMRO base items, 2-14Fiber optic cable for daisychaining, 2-17Fiber optic cable for fronthaul,2-16Grounding, 2-15Installation kits, 2-14Power, 2-15RF antenna, 2-16SFP modules, 2-15Solar Shield, 2-17.............................................................IInstallation materials, 3-3.............................................................LLED state description, A-1.............................................................MMetro Dock Indoortools, 3-4.............................................................PPhysical description, 2-4Power supply, 2-9Pre-installation, 3-3product conformance statements,B-1Product delivery contents, 3-3Product features and attributes, 2-2product labeling, 2-11.............................................................SStandard pole mount, 3-7Standard wall mount, 3-12status indicators, 2-11Supported installation optionsDaisy chain, 2-12Standard, 2-12.............................................................TTools, 3-4typographical conventionsdescribing, xii.............................................................WWeights and dimensions, 2-4....................................................................................................................................................................................................................................9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements IN-1FCC FILING FCC FILING
Index........................................................................................................................................................................................................................................................................................................................................................................................................................................................................IN-2 Nokia – Proprietary and ConfidentialUse pursuant to applicable agreements9768 CMRO3MN-CMRO-B13-IMOPIssue 2 July 2016FCC FILING FCC FILING

Navigation menu