Alcatel Lucent Deutschland CMCOB41AC2X6 9764 Compact Metro Cell Outdoor B41 2x6W User Manual Hardware Installation Manual

Alcatel-Lucent Deutschland AG 9764 Compact Metro Cell Outdoor B41 2x6W Hardware Installation Manual

Contents

Hardware Installation Manual

Title pageAlcatel-Lucent 9764Compact Metro Cell Outdoor B41 2x6WHardware Installation3MN-02026-0002-RJZZAIssue 0.01 | April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instructionProprietary Use pursuant to Company instructionPRELIMINARYPRELIMINARY
Legal noticeLegal noticeAlcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respectiveowners.The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.Copyright © 2015 Alcatel-Lucent. All rights reserved.Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outsideAlcatel-Lucent without its written authorization.NoticeEvery effort was made to ensure that the information in this document was complete and accurate at the time of printing. However, information is subjecttochange.Proprietary Use pursuant to Company instructionAlcatel-Lucent – InternalProprietary – Use pursuant to Company instructionPRELIMINARYPRELIMINARY
ContentsAbout this documentPurpose ............................................................................................................................................................................................. xixiWhat's new ...................................................................................................................................................................................... xixiSafety information ........................................................................................................................................................................ xixiIntended audience ......................................................................................................................................................................... xixiSupported systems ........................................................................................................................................................................ xixiSafety labels .................................................................................................................................................................................. xiixiiHow to use this document ........................................................................................................................................................ xiixiiConventions used ........................................................................................................................................................................ xiixiiSystems supported ..................................................................................................................................................................... xivxivRelated documentation ............................................................................................................................................................. xivxivRelated training ........................................................................................................................................................................... xivxivDocumentation support ............................................................................................................................................................. xvxvTechnical support ......................................................................................................................................................................... xvxvHow to order .................................................................................................................................................................................. xvxvHow to comment .......................................................................................................................................................................... xvxv1SafetyOverview ...................................................................................................................................................................................... 1-11-1Structure of safety statements ............................................................................................................................................... 1-21-2Safety ........................................................................................................................................................................................... 1-41-4Safety - specific hazards ......................................................................................................................................................... 1-51-5Product safety .......................................................................................................................................................................... 1-101-10....................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction iiiPRELIMINARYPRELIMINARY
2Product overviewOverview ...................................................................................................................................................................................... 2-12-1Functional description ............................................................................................................................................................. 2-22-2Physical description ................................................................................................................................................................. 2-42-49764 CMCO weights and dimensions ............................................................................................................................ 2-112-11Hardware and ancillary items ............................................................................................................................................ 2-122-123Pre-installationOverview ...................................................................................................................................................................................... 3-13-1Pre-installation information .................................................................................................................................................. 3-23-2Installation clearances ............................................................................................................................................................. 3-43-4Pole mount installation requirements ................................................................................................................................ 3-53-5Wall mount installation requirements ................................................................................................................................ 3-73-7Daisy chain requirements ....................................................................................................................................................... 3-93-94InstallationOverview ...................................................................................................................................................................................... 4-14-1Pre-installation cablingOverview ...................................................................................................................................................................................... 4-24-2Ethernet cabling - fiber optic ................................................................................................................................................ 4-34-3Ethernet cabling - electrical .................................................................................................................................................. 4-94-9InstallationOverview ................................................................................................................................................................................... 4-174-17Pole mount the 9764 CMCO .............................................................................................................................................. 4-184-18Pole mount the 9764 CMCO using optional tilt brackets ........................................................................................ 4-244-24Wall mount the 9764 CMCO ............................................................................................................................................. 4-324-32Wall mount the 9764 CMCO using optional tilt brackets ....................................................................................... 4-384-38Contents........................................................................................................................................................................................................................................................................................................................................................................................................................................................................iv Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
5CablingOverview ...................................................................................................................................................................................... 5-15-1Connect ground cable .............................................................................................................................................................. 5-25-2Connect RF antennas ............................................................................................................................................................... 5-45-4Connect GPS antenna .............................................................................................................................................................. 5-85-8Connect power cable ............................................................................................................................................................. 5-125-126Post-installationOverview ...................................................................................................................................................................................... 6-16-1Final installation activities and checks .............................................................................................................................. 6-26-2A9764 CMCO service positionOverview ..................................................................................................................................................................................... A-1A-19764 CMCO service position .............................................................................................................................................. A-2A-2BLED State DescriptionOverview ..................................................................................................................................................................................... B-1B-1LED status for 9764 CMCO ................................................................................................................................................ B-2B-2CInstallation of the 9764 MCO Wi-Fi APOverview ..................................................................................................................................................................................... C-1C-1Physical description - external 9764 MCO Wi-Fi AP module ................................................................................. C-2C-29764 MCO Wi-Fi AP pre-installation information ...................................................................................................... C-9C-9Attach 9764 MCO Wi-Fi AP module to 9764 CMCO ............................................................................................. C-10C-10LED state description - external Wi-Fi AP module ................................................................................................... C-13C-13DProduct conformance statementsOverview ..................................................................................................................................................................................... D-1D-1Federal Communications Commission ............................................................................................................................ D-2D-2Product safety conformance statements .......................................................................................................................... D-4D-4Antenna exposure statements .............................................................................................................................................. D-5D-5Contents........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction vPRELIMINARYPRELIMINARY
FDA/IEC optical transmitter product compliance statements ................................................................................. D-7D-7Eco-environmental statements ............................................................................................................................................ D-8D-8GlossaryIndexContents........................................................................................................................................................................................................................................................................................................................................................................................................................................................................vi Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
List of tables3-1 Recommended wall anchor materials ................................................................................................................ 3-33-33-2 Pole mount installation kits and brackets ......................................................................................................... 3-53-53-3 Wall mount installation brackets .......................................................................................................................... 3-73-7B-1 LED statuses ............................................................................................................................................................... B-2B-2C-1 9764 MCO Wi-Fi AP physical characteristics ............................................................................................... C-4C-4C-2 Wi-Fi AP LED states during boot-up .............................................................................................................. C-13C-13C-3 9764 MCO Wi-Fi AP LEDs based on Admin status and WLAN mapping ...................................... C-14C-14C-4 9764 MCO Wi-Fi AP LEDs during normal operation states .................................................................. C-15C-15....................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction viiPRELIMINARYPRELIMINARY
List of tables........................................................................................................................................................................................................................................................................................................................................................................................................................................................................viii Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
List of figures2-1 9764 Compact Metro Cell Outdoor .................................................................................................................... 2-42-42-2 9764 Compact Metro Cell Outdoor with 9764 Wi-Fi AP ........................................................................... 2-52-52-3 Backhaul module variants ...................................................................................................................................... 2-92-92-4 Installation examples ............................................................................................................................................. 2-122-122-5 9764 MCO Wi-Fi AP module attached to 9764 CMCO (front view) .................................................. 2-132-132-6 9764 MCO daisy chain installation example ................................................................................................ 2-142-143-1 Mounting bracket ....................................................................................................................................................... 3-23-23-2 9764 CMCO B41 2x6W installation clearances ............................................................................................ 3-43-43-3 Pole mount banding and brackets ........................................................................................................................ 3-63-63-4 9764 CMCO wall mount examples ..................................................................................................................... 3-83-85-1 Position of grounding point ................................................................................................................................... 5-35-35-2 External GPS antenna configuration .................................................................................................................. 5-85-85-3 External GPS antenna connector ......................................................................................................................... 5-95-95-4 Power connection interface ................................................................................................................................. 5-125-12C-1 9764 MCO Wi-Fi AP attached to 9764 MCO hardware variants ............................................................ C-2C-2C-2 9764 MCO Wi-Fi AP - closed housing ............................................................................................................. C-3C-3C-3 9764 MCO Wi-Fi AP - cutaway view ............................................................................................................... C-4C-4C-4 9764 MCO Wi-Fi AP connection point on 9764 MCO .............................................................................. C-6C-6C-5 9764 MCO Wi-Fi AP connected to 9764 MCO (cutaway side view) ................................................... C-6C-6....................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction ixPRELIMINARYPRELIMINARY
List of figures........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xAlcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
About this documentAbout this documentPurposeThis document provides hardware installation instructions for an Alcatel-Lucent 9764CMCO B41 2X6WProcedures are provided for MCO handling, mounting, grounding, powering, and cabling.What's newThe major changes introduced in this issue of the document are described in the followingparagraphs.Document changes from the previous software releaseLocation Reissue Issueentire document Created the first draft issue 0.01, April 2015Safety informationFor your safety, this document contains safety statements. Safety statements are given atpoints where risks of damage to personnel, equipment, and operation may exist. Failure tofollow the directions in a safety statement may result in serious consequences.Intended audienceThis document is intended for customers installing an Alcatel-Lucent 9764 CompactMetro Cell Outdoor product(MCO) B41 2X6W .Supported systemsThis document assumes that a continuous stream of connected devices already deliverssecure connectivity to the public network from one or more reachable places in the venue.With this assumption, the scope of the document is only the 9764 Compact Metro CellOutdoor product B41 2X6W and what is required to connect it to the network, meet itspower needs, and ensure that it can be placed into reliable service....................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction xiPRELIMINARYPRELIMINARY
Safety labelsThe safety alert symbol is used on product labels and in this document to alert the user toimportant safety instructions.How to use this documentStart with the first chapter and work through the manual to the end. Once you have donethis, you will have carried out the hardware installation completely and in the propersequence.Prior to installing the MCO, the installer should be familiar with the safety precautions,warnings, and product conformance statements. Required tools and materialsrecommended for installation, and a process checklist, are listed in Chapter“Pre-installation information” .Conventions usedIn this document, all parts are described as they are shipped. Metric parts are specified inmetric units. Non-metric parts are specified in non-metric units.Lengths and other measurements are given in metric units, with non-metric units given asequivalents for use in non-metric markets.For manufactured parts, the following system of conventions is used:•Metric sizes of nuts, bolts, flat washers, and lock washers are identified by anuppercase letter M followed immediately by a size in millimeters (example: M10)•American fractional sizes of nuts, bolts, anchor bolts, and washers are identified by anumber followed immediately by a double apostrophe (example: 3/8"). In the case oflengths measured in feet, "2 feet" is used rather than "2'" so that the single apostropheis not overlooked.The illustrations in this document do not contain all details and exceptions, but are ratherintended to highlight main points. Dimensions are usually shown in millimeters, withinches in parenthesis. As an example, 680.0 (26.77) equals 680 millimeters or 26.77inches.Wire gauges are specified in metric units. Equivalent sizes in the American Wire Gauge(AWG) system are given in the following table.About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xii Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Standard cross-sections and wire diameter of round copper conductorsThe following table is from CEI/IEC 60947-1:2004, Table 1, Standard cross-sections ofround copper conductors and approximate relationship between mm2and AWG/kcmilsizes for reference. Additional wire sizes are included in this document as appropriate forthe topic.ISO rated cross-sectional area (mm2) AWG/kcmil size0.2 240.34 220.5 200.75 181-1.5 162.5 1441261010 816 625 435 2-150 0 (1/0)70 00 (2/0)95 000 (3/0)- 0000 (4/0)120 250 kcmil150 300 kcmil185 350 kcmil- 400 kcmil240 500 kcmil300 600 kcmilNOTE: The dash, when it appears, counts as a size when considering connecting capacity (see7.1.7.2 in the standard).About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction xiiiPRELIMINARYPRELIMINARY
Typographical conventionsThe typographical conventions used in this document are described in the following table.Appearance Descriptionemphasis Text that is emphasizeddocument titles Titles of books or other documentsgraphical user interface text Text that is displayed in a graphical userinterfacevariablesA value or command-line parameter that theuser providesSystems supportedThis document applies to the Alcatel-Lucent 9764 CMCO B41 2X6W.Related documentationFor information on subjects related to the content of this document, refer to the followingdocuments listedAlcatel-Lucent documentsThe following documents may provide additional useful information:•Alcatel-Lucent 9764 CMCO B41 2X6W Site Preparation, 3MN-02026-0001-RJZZA•Alcatel-Lucent 9764 CMCO B41 2X6W Maintenance and Troubleshooting,9YZ-06340-0315-REZZA•Alcatel-Lucent 9764 CMCO B41 2X6W Maintenance and Troubleshooting,9YZ-06340-0314-DEZZAOther documents•Standard for Installation of Lightning Protection Systems, NFPA•Recommended Practices on Surge Voltages in Low Voltage AC Power Circuits, IEEEC62.41 (Latest Edition)•GR-487-CORE, Telcordia.Related trainingSafety training in the following areas is required for personnel installing Alcatel-Lucentproducts and associated equipment:•Hazard Communication•Lift Safety•Hoist SafetyAbout this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xiv Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
•Lock Out/Tag Out•Accident/Incident Reporting.Other related training is for:•Integration into the cell site•Operation, Administration, and Maintenance (OA&M)Documentation supportFor support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent atone of the following telephone numbers:•+1-888-582-3688 (for the United States)•+1-630-224-2485 (for all other countries)Technical supportFor technical support, contact your local Alcatel-Lucent customer support team. See theAlcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contactinformation.How to orderTo order Alcatel-Lucent documents, contact your local sales representative or use OnlineCustomer Support (OLCS) (http://support.alcatel-lucent.com) .How to commentTo comment on this document, go to the Online Comment Form (http://infodoc.alcatel-lucent.com/comments/) or e-mail your comments to the Comments Hotline(comments@alcatel-lucent.com).About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction xvPRELIMINARYPRELIMINARY
About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xvi Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
11SafetyOverviewPurposeThis chapter covers safety precautions.ContentsStructure of safety statements 1-2Safety 1-4Safety - specific hazards 1-5Product safety 1-10...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 1-1PRELIMINARYPRELIMINARY
Structure of safety statementsOverviewThis topic describes the components of safety statements that appear in this document.General structureSafety statements include the following structural elements:Item Structure element Purpose1 Safety alert symbol Indicates the potential for personal injury(optional)2 Safety symbol Indicates hazard type (optional)3 Signal word Indicates the severity of the hazard4 Hazard type Describes the source of the risk of damage orinjury5 Safety message Consequences if protective measures fail6 Avoidance message Protective measures to take to avoid the hazard7 Identifier The reference ID of the safety statement(optional)SAMPLELifting this equipment by yourself can result in injurydue to the size and weight of the equipment.Always use three people or a lifting device to transportand position this equipment. [ABC123]CAUTIONLifting hazardSafety Structure of safety statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Signal wordsThe signal words identify the hazard severity levels as follows:Signal word MeaningDANGER Indicates an extremely hazardous situation which, if not avoided, willresult in death or serious injury.WARNING Indicates a hazardous situation which, if not avoided, could result indeath or serious injury.CAUTION Indicates a hazardous situation which, if not avoided, could result inminor or moderate injury.NOTICE Indicates a hazardous situation not related to personal injury.Safety Structure of safety statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 1-3PRELIMINARYPRELIMINARY
SafetyGeneral precautions for installation proceduresWARNINGFailure to observe these safety precautions may result in personalinjury or damage to equipment.•Read and understand all instructions.•Follow all warnings and instructions marked on this product.•Installation and maintenance procedures must be followed and performed bytrained personnel only.•The equipment must be provided with a readily accessible disconnect deviceas part of site preparation.•Grounding and circuit continuity is vital for safe operation of the equipment.Never operate the equipment with grounding/bonding conductordisconnected.•Install only equipment identified in the product's installation manual. Use ofother equipment may result in an improper connection which could lead tofire or injury.•Use caution when installing or modifying telecommunications lines.•The product has multiple power inputs. Before servicing, Disconnect allinputs to reduce the risk of energy hazards.•For continued protection against risk of fire, all fuses used in this productmust be replaced only with fuses of the same type and rating.•Never install telecommunications wiring during a lightning storm.•Never install telecommunications connections in wet locations.•Never touch uninsulated wiring or terminals carrying direct current orringing current, and never leave this wiring exposed. Protect and tapeuninsulated wiring and terminals to avoid risk of fire, electrical shock, andinjury to personnel.•Never spill liquids of any kind on the product.•To reduce the risk of an electrical shock, do not disassemble the product.Opening and removing covers and/or circuit boards may expose you todangerous voltages or other risks. Incorrect reassembly can cause electricalshock when the unit is subsequently used.Safety Safety........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Safety - specific hazardsDANGERElectric-shock hazardWorking in severe weather can result in personal injury or death and damage to theequipment.Never install or perform maintenance during severe weather (high winds, lightning,blizzards, hurricane etc.).DANGERNoxious-substance hazardUse of unspecified cleaning agents can result in personal injury.Use only specified cleaning agents. Never use flammable solvents.Always ensure there is adequate ventilation in the work area and wear the appropriatepersonal protective equipment.WARNINGElectric-shock hazardSome parts of all electrical installations are energized. Failure to observe this fact andthe safety warnings may lead to bodily injury and property damage.For this reason, only trained and qualified personnel (electrical workers as defined inIEC 60215 + A1 or EN 60215) may install or service the installation.WARNINGElectric-shock hazardThe power supply lines to the network element are energized. Contact with parts carryingvoltage can cause health problems, possibly including death, even hours after the event.Open and lockout the load disconnect switch in the distribution box to completelyde-energize the network element.Safety Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 1-5PRELIMINARYPRELIMINARY
WARNINGElectric-shock hazardThis product may be connected to an AC main power supply and may contain an internalbattery supply. Disconnecting one power source may not de-energize the system, and canlead to serious injury.Disconnect and lock out the AC main power supply, if present, and the internal batterysupply, if present, before servicing the equipment.WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof, etc.) follow safework practices and wear appropriate fall protection equipment.CAUTIONRF hazardRF exposure in excess of applicable limits can result adverse health effects.Metro Cells are designed and installed in order to comply with the international exposureguidelines laid down by the International Commission on Non-Ionizing RadiationProtection (ICNIRP) and/or the Institute of Electrical & Electronics Engineers (IEEE)C95.1. ICNIRP guidelines have been implemented by the European Commission and anumber of other countries. IEEE guidelines have been implemented in North America andsome other countries.Workers that are required to work in close proximity to the equipment, for examplemaintenance personnel, should strictly follow instructions provided by their employer.Workers equipped with personal medical electronic devices, such as pacemakers andhearing aids, shall consult the manufacturer's instructions and consult their occupationalhealth practitioner.Safety Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
NOTICEESD hazardSemiconductor devices can be damaged by electrostatic discharges.The following rules must be complied with when handling any module containingsemiconductor components:•Wear conductive or antistatic working clothes (for example, coat made of 100%cotton).•Wear the grounded wrist strap.•Wear shoes with conductive soles on a conductive floor surface or conductive workmat.•Leave the modules in their original packaging until ready for use.•Make sure there is no difference in potential between yourself, the workplace, and thepackaging before removing, unpacking, or packing a module.•Hold the module only by the grip without touching the connection pins, tracks, orcomponents.•Test or handle the module only with grounded tools on grounded equipment.•Handle defective modules exactly like new ones to avoid causing further damage.NOTICECondensationSudden changes in the weather may lead to the formation of condensation oncomponents. Operating the unit when condensation moisture is present can destroy theunit.Units which show signs of condensation must be dried before installation.CAUTIONLaceration hazardThe RRH may have sharp edges and burrs and contact may cause cuts and lacerations.Wear appropriate personal protective equipment.Safety Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 1-7PRELIMINARYPRELIMINARY
NOTICEToolsTools left in the working area can cause short circuits during operation which can lead tothe destruction of units.Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,have been left in or on the equipment.NOTICEInadequate circulationInadequate circulation of cooling air can cause some units to become too warm. This canlead to operational impairment.Cover all installation slots for unequipped units with blanking panels.CAUTIONHot-surface hazardThe surfaces of the MRO can become hot enough to cause burns on unprotected skin. Onthe product label, the universal symbol for Hot Surface (shown here) emphasizes thishazard.Before handling the unit, wait until its surfaces have cooled and, where the followingconditions apply, ensure that it is mounted out of the public's reach.The 9768 MRO B38 shall operate normally with an ambient air temperature as low as-40ºC and as high as 55ºC under a solar load of up to 1120 mW/m2.NOTICECorrosive-substance hazardCleaning plastic containers and lids with abrasive and aggressive cleaning agents maycause permanent damage.Do not use solvents, paraffin, abrasive or aggressive cleaning fluids, abrasive oraggressive antiseptic agents or abrasive or aggressive materials.Safety Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
NOTICEService-disruption hazardCleaning with water or a high-pressure cleaner may damage the components in the RRH.The washing down of the equipment with water or a high-pressure cleaner is notpermitted.Safety Safety - specific hazards........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 1-9PRELIMINARYPRELIMINARY
Product safetyEquipment safetySafety information for this equipment can be found on various Caution, Warning, Danger,information labels or instructions affixed to or included with the product or includedwithin this document. Informational and cautionary labels may appear near the item theyaddress or may be grouped in a single location on the equipment. Warnings are typicallyadjacent to the hazard that is noted on the label. The instructions, cautions and warningsfound on these labels must be understood and observed by all personnel involved with theequipment installation and maintenance.Safety Product safety........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-10 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
22Product overviewOverviewPurposeThis chapter provides an overview of the Alcatel-Lucent 9764 Compact Metro CellOutdoor hardware and product functionality.ContentsFunctional description 2-2Physical description 2-49764 CMCO weights and dimensions 2-11Hardware and ancillary items 2-12...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-1PRELIMINARYPRELIMINARY
Functional descriptionGeneral descriptionAs a key component of high capacity networks, Alcatel-Lucent Metro Cells fill coveragegaps between macro cells and provide indoor (and outdoor) coverage from indoor oroutdoor locations, enabling mobile network operators (MNOs) to deliver cost-effectivecapacity to urban spots, as well as affordable coverage to suburban and rural locations.Their essential usage is to deliver significantly higher capacity in places that need it,contributing to enhancement of the quality of experience (QoE) for end users. It can alsocomplement or improve significantly the LTE macro layer coverage.Alcatel-Lucent Metro Cells when used as components of heterogeneous networks(HetNets), are compatible with both Alcatel-Lucent macro cells and 3rd party vendormacro cells and integrate easily into any LTE network, without impacting the currentRAN deployment. The combination of macro eNodeB and 9764 MCO advancedinterference management features minimize any impact on macro network performance.Product capabilitiesThe product capabilities in this release are:•Supports LTE TDD•Full B41, 2500 MHz frequency band.•Optional directional or omnidirectional external antennas or Single or Dual ElementAntenna Module enabling higher throughput, lower interference and greater powerefficiency.•Standard 2x2 MIMO configurations, 2 transmit and 2 receive diversity.•The hardware is ready is ready for up to 3 LTE carriers.•Supports traffic backhauled through the standard IP network. The product supportstwo different SFP backhaul modules for different installation use-cases: one for daisychaining or one with PoE+ capability to power and backhaul any PoE+ compatibleexternal device.•An individual field-replaceable unit (FRU) - as is the optional 9764 MCO Wi-Fi APmodule.•Connecte to 3GPP EPC through standard S1 interfaces and can be connected to otherbase stations using standard X2 interface.Main characteristicsThe MCO is designed as a small, lightweight unit virtually invisible to be used outdoorand can be integrated in urban furniture or mounted on a lamppost, pole, or wall.It is secured and plug-and play (allowing initial and on-going self-configuration).Product overview Functional description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
The main characteristics are:Performances CharacteristicsTransmit power 2 x 37.8 dBm (2x6W)Typical antenna gain 7.5 dBi (Single Element Antenna module), 9.5 dBi(Dual Element Antenna module)Number of users supported 200 Simultaneous Active Users per carrier, up to 3carriersSupported bandwidth Up to 3 carriers of 10, 15 or 20 MHzThroughput/Data rate speed in Mbps(20 MHz)HW capability: 112.45 DL / 9.6 UL L2 Framethroughput, Frame Configurations 2 Special Sub Frame7Deployment scenariosThe 9764 CMCO may be deployed indoors or outdoors in public places and can bemounted on walls, lamp posts, poles, or even on the side of a building in a verticalorientation thanks to the Metro Compact Mounting Frame.It can also be integrated in urban furniture such as bus shelter and information panels.Optional tilt mounting brackets allow for the 9764 CMCO to be adjusted in verticaland/or horizontal directions at same time, supporting:•Up to +/- 30° vertical tilt (up/down) (from a purely mechanical perspective)(CAVEAT: thermal specifications dictate maximum adjustment of +/- 20° verticaltilt).•Up to +/- 45° azimuth (side-to-side) adjustments.Product overview Functional description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-3PRELIMINARYPRELIMINARY
Physical descriptionProduct overviewThe Compact Metro Cell Outdoor concept targets to provide a common look and feel aswell as simplified installation and upgrade procedures. It brings new deploymentflexibility with its small dimensions and volume and its modular approach in RF and GPSantennas, Wi-Fi access point (AP) and backhaul. Alcatel-Lucent’s innovative servicemodule design separates out.Figure 2-1 9764 Compact Metro Cell OutdoorProduct overview Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
In order to simplify configurations the backhaul access function and the radio partfunctions are separated, with a common interface as defined:Unit Function Description9764 CMCO Radio part function Radio functionsDigital processing functionsPower supply functionsBackhaulmoduleBackhaul access functionProvides power to a remote PoweredDevice (PD) for PoE+ case.Two backhaul module variants:•Dual SFP•1 SFP/PoE+ RJ45note: The RJ45 port of the backhaulmodule PoE+ can only be used forelectrical backhaul connectivity. In afuture release, this port could beavailable to connect a POE+ device(WI-FI AP).9764 MCOWi-Fi APmoduleWi-Fi function Wi-Fi network access functionRefer to Alcatel-Lucent Small CellWi-Fi AP Technical Description,3MN-01840-0004-DEZZA forWi-Fi AP product details.note: 9764 MCO Wi-Fi AP V1.0does not support B7 and B41Compact Metro Cell.Figure 2-2 9764 Compact Metro Cell Outdoor with 9764 Wi-Fi AP9764 Wi-Fi AP9764 Wi-Fi AP 9764 MCO front viewwith 9764 Wi-Fi APProduct overview Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-5PRELIMINARYPRELIMINARY
Alcatel-Lucent 9764 Compact Metro Cell Outdoor overviewThe Alcatel-Lucent 9764 Compact Metro Cell Outdoor is made up of three main unitswhich are responsible for radio, digital processing and power supply functions.Unit FunctionModem board Digital part:•Giga Ethernet switch•Processors to provide modem and controller functionality•Internal GPS/GLONASS Receiver for localizationsynchronization•9764 MCOWi-Fi AP interfaceRadio Board Radio part:•LTE Band 41•Two external RF antenna connectors (Type N)PSU (Power Supply Unit) Power supply part:•Internal power module unit provides AC/DC conversion(5.3 V output) to the Modem board (MEMO).•The Modem board (MEMO) distributes 5.3 V output andprovides secondary DC-DC conversion to generate allother (lower) voltages needed within the board.Notes:1. The 9764 CMCO is hardware ready for GLONASS satellite synchronization. Softwaresupport for GLONASS synchronization will be added in a future release.9764 CMCO connection interfacesThe following figure shows the connection interfaces for the 9764 CMCO :Product overview Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Connection location Description9764 CMCO (top) Power supply connectorRF antenna connectorsQMA to external GPS antenna9764 CMCO (bottom)1A blind mate connection to 9764 MCO Wi-Fi AP9764 CMCO (back) Backhaul and daisy chaining ports via a backhaul module,either•Dual SFP backhaul module•SFP/PoE+ RJ45 backhaul moduleNotes:1. The RJ45 port of the backhaul module PoE+ can only be used for electrical backhaulconnectivity. In a future release, this port could be available to connect a POE+ device(WI-FI AP).2. The Alcatel-Lucent 9764 Compact Metro Cell Outdoor can also support the Alcatel-Lucent9764 MCO Wi-Fi Access Point, with restrictions: 9764 MCO Wi-Fi AP V1.0 does notsupport B7 and B41 Compact Metro Cell.Product overview Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-7PRELIMINARYPRELIMINARY
Power supplyThe 9764 CMCO product is orderable as an option to support either AC or DC powerinput.9764 CMCO Power supply detailsAC variant AC power supply that operates from a single phase, three wire voltagesource in the 85 to 270 Volt range. Product rated voltage range is 110 to240 Volt.The AC power is surge-protected and conforms to ETSI EN 301-489-1V1.9.2 section 9.8 and GR-1089-CORE Issue 6 port type 7.Fully configured and operating at maximum levels, the productdissipates less than 150 WDC variant -48 V DC power supply that operates over the voltage range from -40 VDC to -57 V DC. For first start-up -45 Volts +/- 3 Volts is required.Fully configured and operating at maximum levels, the productdissipates less than 150 WBackhaul interfaceThe following two backhaul (BH) configurations are supported on the 9764 CMCO:•Dual SFP, where– Each SFP can be either GigE (electrical or optical) or GPON– Can be used for daisy chain configurations, where the SFP in the 2nd BH portmust be optical•SFP and Power over Ethernet (PoE)+ (IEEE 802.3at), where– The single SFP can be either GigE (electrical or optical) or GPON– The PoE+ backhaul module powers a PoE+ capable Powered Device (PD), e.g. awireless backhaul. This interface provides up to 25.5 W of power to the remotelyconnected PD.– It can support a daisy chain configurations to other MCOs in the SFP port whenthe PoE+ port is used for wireless backhaul.Note: if the CMCO is the 2nd module of a daisy-chain, the first port SFP is not usedfor BH connection but used for daisy-chain and then it supports only GBE or CPRIoptical.Up to two 9764 CMCOs may be daisy-chained. If two 9764 CMCO aredaisy-chained, the BH module POE+ can be used for “Head-CMCO” onlyNote: Backhaul module POE+ is not supported by 9764 CMCO B41 2x6W units.Product overview Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
RF antennaThe 9764 CMCO supports two external antenna connectors (Type N) on the top of theenclosure supporting an antenna module in the following configurations:•Attached RF antennas mounted on the side of the 9764 CMCO•Cabling to external remote RF antennasNote: When deploying a 9764 CMCO with remote LTE antennas and a Wi-Fi APmodule, antenna isolation between the remote external LTE antennas and the Wi-FiAP module antennas must be at least -42 dB.Refer to the RF antennas part of the System architecture topic of the Alcatel-Lucent 9764Compact Metro Cell Outdoor Technical Description for more RF antenna information.GPS/GLONASS AntennaThe 9764 CMCO supports an external GPS/GLONASS antenna connector (QMA) on thetop of the enclosure allowing the following GPS/GLONASS antenna configurations:•Attached GPS/GLONASS antenna mounted on the top of the 9764 CMCO•Cabling to an external remote GPS antennaFigure 2-3 Backhaul module variantsProduct overview Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-9PRELIMINARYPRELIMINARY
This attached GPS/Glonass antenna is connected via a 70cm long cable to the QMAconnector located on the top or the MCO housing. In case the 9764 CMCO shall bemounted up side down the antenna can be relocated to a position visible to the satellites.Note: The 9764 CMCO is hardware ready for GLONASS satellite synchronization.Software support for GLONASS synchronization will be added in a future release.Status indicatorsThe 9764 CMCO supports a single bi-color LED (red/green) which is located on the rearlower portion of the casing. The LED is not intended for use during normal operation ofthe equipment; however, it can provide a visual status of the equipment during initialinstallation and commissioning.Product labellingA 9764 CMCO product label provides the following information:•Model name•Part number•Serial number•MAC address•Power input range•CE Approval marking•Environmental marking (WEEE/RoHS) applicable to the deviceProduct overview Physical description........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-10 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
9764 CMCO weights and dimensionsWeights and dimensionsThis topic covers the 9764 CMCO weights and dimensions.Standard MRO weights and dimensionsThe following table provides weights and dimensions for the 9764 CMCO.9764 CMCOconfigurationVolumelitresWeightkgSizes (LxWxD)mm9764 CMCO <7.5 L 7.3 kg 265 x 180 x 156.5mmProduct overview 9764 CMCO weights and dimensions........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-11PRELIMINARYPRELIMINARY
Hardware and ancillary itemsOverviewThe following section describes the supported installation options for the 9764 CMCOproduct. These include:•Standard installation options for all 9764 CMCO products•Daisy chain installation options where two 9764 CMCO modules are daisy chainedtogether and share the same backhaul portStandard installation options9764 MCO products are designed to be deployed outdoors and close to the users, usuallyon light poles or lamp posts in streets or on building walls, with a vertical profile.In addition, the 9764 CMCO can be fitted with an optional Alcatel-Lucent 9764 MetroCell Outdoor Wi-Fi AP.Note: 9764 MCO Wi-Fi AP V1.0 does not support B41 Metro Cells.Figure 2-4 Installation examplesProduct overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-12 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Refer to Alcatel-Lucent Small Cell Wi-Fi AP Technical Description, 3MN-01840-0004-DEZZA for Wi-Fi AP product details.Ethernet daisy chain installation optionsIn a daisy chain installation configuration two 9764 MCOs can be daisy chained together,where they share the same backhaul port, thus reducing the investment cost needed toconnect the 9764 MCO s to the backhaul network and aggregating the uplink anddownlink traffic. Daisy chained 9764 MCO s may be co-located or separated by somedistance. The actual distance depends upon the SFP and Ethernet cable configuration usedfor the daisy chain. Maximum distance is 100 m when using electrical Ethernet cable and300 m when using optical Ethernet cable. Refer to, “Hardware and ancillary items” forsupported SFPs and Ethernet cable types and lengths.If a 9764 MCO is to be included in the daisy chain configuration, the following Wi-Fi APconfigurations are supported:•A 9764 MCO can be attached to each daisy chained 9764 MCO when the daisychained MCOs are installed in separate locations (e.g., not co-located on the samepole).•If the daisy chained 9764 MCO are co-located, only one 9764 MCO can be used, andthe 9764 MCO can be attached to either MCO.Figure 2-5 9764 MCO Wi-Fi AP module attached to 9764 CMCO (front view)Wi-Fi APProduct overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-13PRELIMINARYPRELIMINARY
Street furniture installationThe 9764 MCO can be installed as part of street furniture, for example, bus stops andadvertising boards, to further improve the quality of service provided to users in highdensity areas such as city centers.9764 CMCO base itemsThe product packaging contains the following base items:•9764 CMCO (including “attached” GPS/GLONASS antenna)•9764 CMCO configured backhaul module variant (not attached to the 9764 CMCO )•9764 CMCO mounting bracket•9764 CMCO basic installation kitNote: The 9764 CMCO is hardware ready for GLONASS satellite synchronization.Software support for GLONASS synchronization will be added in a future release.9764 MCO Wi-Fi AP base itemsThe Alcatel-Lucent 9764 Metro Cell Outdoor Wi-Fi AP is an option product. It supportsthe Alcatel-Lucent 9764 MCO Wi-Fi Access Point with restrictions:•9764 MCO Wi-Fi AP V1.0 does not support B7 and B41 Compact Metro Cell.Figure 2-6 9764 MCO daisy chain installation exampleBackhaulProduct overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-14 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Ancillary itemsThe following tables list the ancillary items that are available for order fromAlcatel-Lucent in support of the defined equipment installation and configuration options.Installation kitsThe following table list the installation kits that are available for order fromAlcatel-Lucent in support of the equipment installation options.Installation kit Description UseVertical tilt installation kit Vertical tilt bracket Mandatory:•pole mount with tilt•wall mount: with vertical only•wall mount: with vertical andhorizontal tiltHorizontal tilt installation kit Horizontal tilt bracket Mandatory:•wall mount: with horizontal tilt only•wall mount: with horizontal andvertical tiltBanding kit Stainless steel bandsBand buckles (Ear-Lokt)Mandatory:•pole mount onlyBanding tool Standard BAND-IT®Banding Tool(CR00169), including operatinginstructionsMandatory:•use with the Banding kit for polemount onlyPowerItem Description UsePower connector (AC) AC power connector Required for 9764 CMCO module withAC power (International markets)Power connector (DC) DC power connector Required for 9764 CMCO module withDC power (International markets)Power cable Power cable IN/OUT 3G1,5mm²,100m roll or multiples of 1m length(as needed)Required for 9764 CMCO module(International markets)Power cable (AC) Power cable pre-assembled with ACpower connector, various lengths(2m. 4.5m, 9m, 12m)Required for 9764 CMCO module withAC power (North America Regionalmarkets)Power cable (DC) Power cable pre-assembled with DCpower connector, various lengths(2m. 4.5m, 9m, 12m)Required for 9764 CMCO module withDC power (North America Regionalmarkets)Product overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-15PRELIMINARYPRELIMINARY
GroundingItem Description UseGround cable Ground cable,Y/G 10mm² in 100mrollRequired for International marketsGround cable Ground cable, 8 AWG Required for North America RegionalmarketsBackhaul modulesItem Description UseDual SFP 2 x SFP, where each SFP can beeither GigE (electrical or optical) orGPONMandatoryOne backhaul module variant required per9764 CMCOSFP/PoE+ SFP and Power over Ethernet (PoE)+,where the single SFP can be eitherGigE (electrical or optical) or GPONand the PoE+ port powers a PoE+capable Powered Device (PD)SFP modulesItem Description UseSFP module SFP GBE 10/100/1000BaseT(copper)OptionalElectrical backhaul onlySFP module SFP GBE 1000BaseLX (Singlemode)OptionalOptical backhaul, Daisy chainingSFP module SFP GBE 1000BaseLX / CPRI(Single mode)OptionalOptical backhaul, Daisy chainingSFP module SFP GBE 1000BaseSX / CPRI (Multimode)OptionalOptical backhaul, Daisy chainingSFP module GPON SFP OptionalOptical backhaul onlyRF antennaItem Description Use2.6 GHz RF antenna 2.6 GHz (Band 7), 70° x 35° HPBW,gain 10-11 dBiOptionalUse for attached RF antenna configuration1.7 to 2.1 GHz RF antenna 1.7 to 2.1 GHz (Band 3), 70° x 70°HPBW, gain 7-8 dBiOptionalUse for attached RF antenna configurationProduct overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-16 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
External antenna - GPSItem Description UseGPS antenna External GPS Antenna, 1575MHz*26 dBiUsed if 9764 CMCO is configured forexternal GPS antenna and cable loss<10dBi @ 1575MHzGPS antenna External GPS Antenna, 1575MHz*40 dBiUsed if 9764 CMCO is configured forexternal GPS antenna and cable loss>10dBi @ 1575MHzJumper cable External GPS Antenna jumper cable(2m, 5m, 15m)Mandatory1 cable per 9764 CMCO if external GPSantenna is used (International markets)Jumper cable External GPS Antenna jumper cable(36ft, 60ft)Mandatory1 cable per 9764 CMCO if external GPSantenna is used (North America Regionalmarkets)Adapter cable External GPS Antenna adaptor cable Mandatory1 cable per 9764 CMCO if external GPSantenna is usedSurge arrestorItem Description UseSurge arrestor External Ethernet surge arrestor OptionalHighly recommended if GBE 1000BaseTbackhaul connection is providedSurge arrestor kit External Ethernet surge arrestor kit,including:•mounting bracket•pole bands and buckle•Ethernet cable, 0.6 m (2 ft)Required for External surge arrestorEthernet cable - ElectricalItem Description UseElectrical Ethernet cable 2m, 25m, 100m outdoor, 4 pairs, 2RJ45 (plus 1 spare)OptionalUse with SFP GBE 10/100/1000BaseT(International markets)Electrical Ethernet cable 2m, 25m, 100m outdoor, 4 pairs, 2RJ45 (plus 1 spare)OptionalUse with SFP GBE 10/100/1000BaseT(North America Regional markets)Product overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-17PRELIMINARYPRELIMINARY
Electrical Ethernet cable – SpecificationsWhen selecting Ethernet cables, the following requirements must be taken into account:Item Description UseElectrical Ethernet cable Cathegory: CAT5e and CAT6 support1 Gigabit/sShielding types: S/UTP and SF/UTP:OptionalUse with SFP GBE 10/100/1000BaseTEthernet cable - OpticalItem Description UseFiber Optic cable SMDF LC-LC 2SM 1m OptionalSingle mode fiber duplex. 80mm/80mmBreakout, Outer diameter: 5.5mmUse for Single Mode link (select cablelength)Fiber Optic cable SMDF LC-LC 2SM 2.5mFiber Optic cable SMDF LC-LC 2SM 5mFiber Optic cable SMDF LC-LC 2SM 15mFiber Optic cable SMDF LC-LC 2SM 30mFiber Optic cable SMDF LC-LC 2SM 50mFiber Optic cable SMDF LC-LC 2SM 70mFiber Optic cable SMDF LC-LC 2SM 85mFiber Optic cable SMDF LC-LC 2SM 100mFiber Optic cable SMDF LC-LC 2SM 150mFiber Optic cable SMDF LC-LC 2SM 200mFiber Optic cable SMDF LC-LC 2SM 250mFiber Optic cable SMDF LC-LC 2SM 300mProduct overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-18 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Item Description UseFiber Optic cable MM LC-LC 2MM 1m OptionalMulti Mode fiber duplex. 80mm/80mmBreakout, Outer diameter: 5.5mmUse for Multi Mode link (select cablelength)Fiber Optic cable MM LC-LC 2MM 2.5mFiber Optic cable MM LC-LC 2MM 5mFiber Optic cable MM LC-LC 2MM 10mFiber Optic cable MM LC-LC 2MM 15mFiber Optic cable MM LC-LC 2MM 30mFiber Optic cable MM LC-LC 2MM 50mFiber Optic cable MM LC-LC 2MM 70mFiber Optic cable MM LC-LC 2MM 85mFiber Optic cable MM LC-LC 2MM 100mFiber Optic cable MM LC-LC 2MM 150mFiber Optic cable MM LC-LC 2MM 200mFiber Optic cable MM LC-LC 2MM 250mFiber Optic cable MM LC-LC 2MM 300mSolar shieldItem Description UseSolar shield Solar Shield for Compact MCO OptionalProduct overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 2-19PRELIMINARYPRELIMINARY
Product overview Hardware and ancillary items........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-20 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
33Pre-installationOverviewPurposeThis chapter provides pre-installation information (including required tools and materialsand installation clearances) as well as outlining the possible daisy chain deploymentscenarios and requirements for the Alcatel-Lucent 9764 Compact Metro Cell Outdoorproduct.ContentsPre-installation information 3-2Installation clearances 3-4Pole mount installation requirements 3-5Wall mount installation requirements 3-7Daisy chain requirements 3-9...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 3-1PRELIMINARYPRELIMINARY
Pre-installation informationVerify site preparationThe following site preparation requirements should be checked and met before theinstallation of the equipment can begin. If some of the requirements are not met, theinstaller must do so now:•Ensure equipment is planned to be installed as high as possible to avoid obstructions.•Consider nearby sources of interference. Also check possibility of future obstructions.•Ensure adequate clearance is provided for service access.•Ground, power and backhaul cabling has been routed and is in place.•Ensure any site specific fixing materials (screws, washers, wall plugs) for pole/wallmounting the equipment are available.Product delivery contentsUnpack and examine the product packaging contents. If you notice any damage, ormissing items as listed in the Packing List, immediately notify the carrier that deliveredthe unit and contact your Alcatel-Lucent representative.The product packaging contains the following items:•The Alcatel-Lucent 9764 Compact Metro Cell OutdoorInstallation materialsIn addition to the standard product deliverable ensure the appropriate mounting brackets,installation kits and ancillary items are available to support the product mounting options.Figure 3-1 Mounting bracketLocking screw Hinged plateCompact MCOmounting lugsCompact MCOmounting lugsPre-installation Pre-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Table 3-1 Recommended wall anchor materialsSurface structure Recommended anchor materials Recommended screw torqueWood Screw Hex T M8x70 stainless steel (x4)Washer plain M8x16x1.6 stainless steel (x4)7.0 N.m (62.0 lb.in).Concrete Screw CHC M6x80 stainless steel (x4)Washer plain M6x12x1.6mm stainless steel (x4)Washer spring M6x12x1.2mm stainless steel (x4)Plug expansion Rawlnut M6x50 (x4)7.0 N.m (62.0 lb.in).Tools required for installationThe following tools may be used during installation:•Drill (pneumatic hammer) and assorted drill bits•Pliers•Adjustable spanners•M17 socket wrench•Screwdrivers (power and/or manual):– Phillips (flat blade)– Torx (T-25 and T-40)•HRS (Hirose) HT206/TM21p-88p crimping tool (for RJ45 cable)•Data cable tester for shielded RJ45 (optional)•Measuring tape•Digital compass (to aid establishing product orientation)•Marker, to mark wall mounting holes•Vacuum cleaner or equivalent (required for clearing debris from wall mounting holes)•Spirit level•Hammer•PIB (self-amalgamating) tape and 3M Super 33+ vinyl tape•Ear protectors and safety goggles/glasses•Assorted cable ties (various lengths)•Heavy duty tape•Adjustable strapsPre-installation Pre-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 3-3PRELIMINARYPRELIMINARY
Installation clearancesMinimum installation clearancesThe following provides the minimum wall mount clearances recommended around the9764 CMCO B41 2x6W.Metro CellOutdoorClearances mm(inches)CommentSide(s) 400 mm (15.75 inch) Access to secure the solar shield cover.Top 400 mm (15.75 inch) Access to cable connections and cablebending radius.To aid natural air convection.Bottom 400 mm (15.75 inch) Access to connections (Wi-Fi AP).To aid natural air convection.Front 460 mm (18.11 inch) Access to secure the solar shield cover.Rear 20 mm (0.79 inch) For the wall mounting space.To aid natural air convection.Figure 3-2 9764 CMCO B41 2x6W installation clearancesRear clearance20mm (0.79in)Front clearance460mm (18.11in)Bottom clearance400mm (15.75in)Side clearance400mm (15.75 in)Top clearance400mm (15.75in)Side clearance400mm (15.75 in)Pre-installation Installation clearances........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Pole mount installation requirementsPurposeThis topic outlines the basic requirements, installation kits and recommended anchormaterials when mounting the Alcatel-Lucent 9764 Compact Metro Cell Outdoor directlyonto a pole, onto tilt brackets or onto a pair mount bracket.Pole mount optionsThe 9764 CMCO can be easily mounted onto a pole for the following installation options:•9764 CMCO banded onto a pole (without the tilt option).The 9764 CMCO mounting bracket and pole band installation kit is used.•9764 CMCO attached to the vertical tilt bracket. Vertical tilt bracket is banded onto apole.The vertical tilt bracket, 9764 CMCO mounting bracket and pole band installation kitis used.Pole mount installation kits and bracketsThe following table provides the installation kits and brackets that can be used, dependingon the deployment scenario, for 9764 CMCO pole mounting.Table 3-2 Pole mount installation kits and bracketsItem Description9764 MCO Compact mounting bracket Required for attaching the 9764 CMCO directly onto a pole or vertical tiltbracketVertical tilt bracket Provides +/- 30° vertical tilt (up/down) adjustmentBanding kit Required when directly attaching the 9764 CMCO or vertical tilt bracketto a pole (diameter 50 to 300 mm) using stainless steel bands.Stainless steel bands and buckles (Ear-Lokt)Banding tool Standard BAND-IT®Banding Tool (CR00169), including operatinginstructionsRequired in order to tighten stainless steel metal bandsThe following figure shows the brackets used for pole mount installation, depending onthe deployment scenario.Pre-installation Pole mount installation requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 3-5PRELIMINARYPRELIMINARY
Figure 3-3 Pole mount banding and bracketsPole mount no tilt Pole mount with tiltPre-installation Pole mount installation requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Wall mount installation requirementsPurposeThis topic outlines basic requirements, installation kits and recommended anchormaterials when mounting the Alcatel-Lucent 9764 Compact Metro Cell Outdoor onto asolid concrete wall or flat surface or onto tilt brackets.Wall mount optionsThe 9764 CMCO can be easily mounted onto any flat, sturdy wall for the followinginstallation options:•9764 CMCO attached directly onto a wall or flat surface.•9764 CMCO attached to the vertical/horizontal tilt bracket(s). Vertical/horizontal tiltbracket(s) are attached to a wall.Wall mount installation brackets and kitsThe following table lists the installation brackets that can be used, depending on thedeployment scenario, for 9764 CMCO wall mounting.Table 3-3 Wall mount installation bracketsItem Description9764 CMCO mounting bracket Required when attaching the 9764 CMCO directly to a wall or flat surfaceor onto tilt brackets.Vertical tilt bracket Provides +/- 30° vertical tilt (up/down) adjustmentNote: Can be used in combination with the horizontal installation kit toprovide:•+/- 30° vertical tilt (up/down) adjustment, and•+/-45° horizontal tilt (left/right) adjustmentHorizontal tilt bracket Provides +/-45° horizontal tilt (left/right) adjustmentNote: Can be used in combination with the vertical tilt installation kit toprovide:•+-45° horizontal tilt (left/right) adjustment, and•+/- 30° vertical tilt (up/down) adjustmentPre-installation Wall mount installation requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 3-7PRELIMINARYPRELIMINARY
Recommended wall anchor materialsSurface structure Recommended anchor materials Recommended screw torqueConcrete Screw CHC M6x80 stainless steel (x3)Washer plain M6x12x1.6mm stainless steel (x3)Washer spring M6x12x1.2mm stainless steel (x3)Plug expansion Rawlnut M6x50 (x3)7.0 N.m (62.0 lb.in).Wall mount installation examplesThe following figures show examples of 9764 CMCO wall mount installation and wallmount installation with horizontal/vertical tilt.Figure 3-4 9764 CMCO wall mount examplesWall mount no tilt Wall mount horizontal tilt only Wall mount horizontaland vertical tiltPre-installation Wall mount installation requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Daisy chain requirementsOverviewTwo 9764 MCOs can be daisy chained together to share the same backhaul port, thusreducing the investment cost needed to connect the 9764 MCOs to the backhaul networkand aggregating the uplink traffic. Daisy chain connectivity scenarios support 9764MCOs that are co-located and connected together or 9764 MCOs that are separated bysome distance.Daisy chaining configurationsA maximum of two 9764 MCO modules and a single Wi-Fi Access Point may be daisychained together.The 9764 MCO supports the following daisy chain configurations:•A 9764 MCO connected to the backhaul network plus a 9764 MCO connected to thedaisy chain port of the “head” 9764 MCO.•A 9764 MCO connected to the backhaul network plus a 9764 MCO WCDMA moduleconnected to the daisy chain port of the “head” 9764 MCO.Pre-installation Daisy chain requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 3-9PRELIMINARYPRELIMINARY
Note: An optional single Wi-Fi Access Point may be attached to either the MCOconnected to the backhaul network or the MCO that is daisy chained.Pre-installation Daisy chain requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-10 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
44InstallationOverviewPurposeThis chapter provides the instructions for:•Cabling the MCO Compact backhaul module before installing the Alcatel-Lucent9764 Compact Metro Cell Outdoor.•Mounting the 9764 CMCO onto either a pole or wall with or without the optional tiltmechanism.ContentsPre-installation cabling 4-2Ethernet cabling - fiber optic 4-3Ethernet cabling - electrical 4-9Installation 4-17Pole mount the 9764 CMCO 4-18Pole mount the 9764 CMCO using optional tilt brackets 4-24Wall mount the 9764 CMCO 4-32Wall mount the 9764 CMCO using optional tilt brackets 4-38...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-1PRELIMINARYPRELIMINARY
Pre-installation cablingOverviewPurposeThis section provides instructions for routing and connecting the following cables to theMCO Compact backhaul module, depending on the network configuration, before theAlcatel-Lucent 9764 Compact Metro Cell Outdoor is mounted onto a surface:•Fiber optic cable (for optical backhaul), or•Electrical cable (for electrical backhaul)If the backhaul module is to be cabled after the Alcatel-Lucent 9764 Compact Metro CellOutdoor is mounted onto a surface then, in order to gain access to the backhaul module,the 9764 CMCO must firstly be placed in the “service position”. Once the cabling iscomplete the 9764 CMCO should then be moved back to it's “ normal position” . See,Appendix A, “9764 CMCO service position”ContentsEthernet cabling - fiber optic 4-3Ethernet cabling - electrical 4-9InstallationPre-installation cablingOverview........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Ethernet cabling - fiber opticPurposeThis topic describes the procedures to be followed when connecting the optical Ethernetcable to the Alcatel-Lucent 9764 Compact Metro Cell Outdoor. The 9764 CMCO mayeither be in a single configuration, or daisy chained to a second 9764 CMCO.Cabling ancillary itemsThe following backhaul cabling related ancillary items can be ordered fromAlcatel-Lucent:•SFP transceiver for backhaul (depending on network configuration):– SFP GBE 1000BaseLX SFP module (SM or MM). See “SFP modules” (p. 2-16)– GPON SFP transceiver for daisy chaining (for day chain configurations only)•Fiber optic Ethernet cable with LC connector to optical SFP module. See “Ethernetcable - Optical” (p. 2-18)Before you beginBefore you begin the following should be noted:•Equipment cabling should only be carried out by suitably trained or qualifiedpersonnel and must comply with local and national electrical codes.•As a prerequisite, backhaul cable has been routed from the backhaul system to the9764 CMCO.•One SFP port may be cabled for backhaul to the network while the other SFP portmay be cabled for daisy chaining to another 9764 CMCO.•If the backhaul module is to be cabled after the 9764 CMCO is mounted onto asurface then, in order to gain access to the backhaul module, the 9764 CMCO mustfirstly be placed in the “service position”. Once the cabling is complete the 9764CMCO should then be moved back to its “ normal position” . See, Appendix A, “9764CMCO service position”Install SFP transceiver moduleBefore the Ethernet cable can be connected the 9764 CMCO, the SFP port(s) must beequipped with the appropriate SFP transceiver (either 1000Base-X GigE opticaltransceiver or 10/100/1000Base-T electrical transceiver), according to the networkspecifications.InstallationPre-installation cablingEthernet cabling - fiber optic........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-3PRELIMINARYPRELIMINARY
To install an SFP transceiver module into the 9764 CMCO SFP port:...................................................................................................................................................................................................1Firstly, carry out the following to attach the ESD wrist strap:•Attach the ESD strap over your wrist so that is in contact with your bare skin.•Momentarily touch the ESD clip onto a bare (unpainted) metal spot so that any builtup static charge is dissipated.•Attach the ESD clip to the MCO ground lug screw (the ground lug screw can beunscrewed slightly for easier ESD clip attachment)....................................................................................................................................................................................................2Remove the four screws holding the backhaul module onto the back of the 9764 CMCOand turn the module through 180° to access the SFP ports.BackhaulmoduleInstallationPre-installation cablingEthernet cabling - fiber optic........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................3Remove the SFP transceiver module from its protective packaging. Check the label on theSFP transceiver module body to verify that you have the correct type and model for yournetwork.Important! Do not remove the SFP transceiver module dust plugs until directed to doso later in the procedure....................................................................................................................................................................................................4Insert SFP transceiver modules into SFP ports.If... Then... ViewYou are connecting a singlecable from the backhaul system.Align the backhaul optical SFPtransceiver module with the SFP portlabelled “BH 1” and insert themodule into the socket until you feelthe connector latch into place.You are connecting a daisychain cable in addition to thecable from the backhaul system.Align the daisy chain optical SFPtransceiver module with the SFP portlabelled “BH 2” and insert themodule into the socket until you feelthe connector latch into place.Attention: If the SFP module resists as you insert it, do not force it. Remove themodule, turn it over, and try reinserting....................................................................................................................................................................................................5Push up and latch the SFP module locking bar into position to secure the SFP transceivermodule(s) into the port....................................................................................................................................................................................................6To check that each SFP transceiver module is seated and latched properly, grasp the SFPmodule and try to remove it without releasing the latch.If the SFP module cannot be removed, it is installed and seated properly. If the SFPmodule can be removed, reinsert it until the module is latched securely into the socket.InstallationPre-installation cablingEthernet cabling - fiber optic........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-5PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Connect the Ethernet cableTo connect the Ethernet cable(s) to the 9764 CMCO, perform the following steps:...................................................................................................................................................................................................1Ensure that the Ethernet cable coming from the backhaul system to the 9764 CMCO iscorrectly routed. If daisy chaining to a second 9764 CMCO, ensure that the daisy chainEthernet cable is correctly routed to this 9764 CMCO....................................................................................................................................................................................................2Unscrew and remove the rounded compression nut from the cable gland located on thebottom of the bottom of the backhaul module.In the following order place the rounded compression nut, the cable seal and the strainrelief onto the Ethernet cable, as shown:...................................................................................................................................................................................................3Feed the Ethernet cable through the backhaul module gland opening and replace the cableclamp onto the optical cable.Remove dust plugs from the optical cable connectors and the SFP transceiver module andimmediately insert the cable connectors into the SFP transceiver in the port labelled “BH1”.Glandcompression nutCable sealCable strainreliefInstallationPre-installation cablingEthernet cabling - fiber optic........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Loosely insert the gland assembly into the gland housing.Note: The gland assembly with cable may need to be turned slightly in order to fullyslide into the gland housing before the compression nut can be screwed on....................................................................................................................................................................................................5Screw the rounded compression nut back onto the main body of the gland. Use anadjustable or open-end wrench to tighten the compression nut.Important! Alcatel-Lucent recommends that the compression nut is torqued to 2.5 Nm (1.8 lb.ft) in order to create a watertight seal and avoid a potential loose connection....................................................................................................................................................................................................6If you are daisy chaining two 9764 CMCOs feed optical Ethernet cable through thesecond bachkaul module cable gland and insert the daisy chain Ethernet cable connectorinto the SFP transceiver in the port labelled “BH 2”.BH1 portBH2 portBH1 portBH2 portInstallationPre-installation cablingEthernet cabling - fiber optic........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-7PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................7Reattach the backhaul module to the 9764 CMCO using the four retention screws.Important! Ensure the backhaul module gasket is seated correctly in the groove onthe underside of the backhaul module. Tighten the four retention screws in thesequence shown. Recommended torque, 2.0 N.m (17.7 lb.in)....................................................................................................................................................................................................8Finally, secure the Ethernet cable(s) to the wall or pole.Important! When securing cables ensure the following to avoid cable damage:•Secure cables with cable clips. Use additional clips wherever necessary forneatness.•All cables should be run parallel with no twisting or tangled cables.•Avoid excessive tension on the cables.4132InstallationPre-installation cablingEthernet cabling - fiber optic........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Ethernet cabling - electricalPurposeThis topic describes the procedures to be followed when connecting an electrical Ethernetcable to the 9764 CMCO. The 9764 CMCO may either be in a single configuration, ordaisy chained to a second 9764 CMCO.Cabling ancillary itemsThe following backhaul cabling related ancillary items can be ordered fromAlcatel-Lucent:•10/100/1000Base-T electrical transceiver. See “SFP modules” (p. 2-16).•Electrical Ethernet cable with RJ45 connector to electrical SFP module. See “Ethernetcable - Electrical” (p. 2-17).Before you beginBefore you begin the following should be noted:•Equipment cabling should only be carried out by suitably trained or qualifiedpersonnel and must comply with local and national electrical codes.•As a prerequisite, backhaul cable has been routed from the backhaul system to the9764 CMCO.•One SFP port may be cabled for backhaul to the network while the other SFP portmay be cabled for daisy chaining to another 9764 CMCO.•If the backhaul module is to be cabled after the 9764 CMCO is mounted onto asurface then, in order to gain access to the backhaul module, the 9764 CMCO mustfirstly be placed in the “service position”. Once the cabling is complete the 9764CMCO should then be moved back to it's “ normal position” . See, Appendix A,“9764 CMCO service position”Install SFP transceiver moduleBefore the Ethernet cable can be connected to the 9764 CMCO, the SFP port(s) must beequipped with the appropriate SFP transceiver (either 1000Base-X GigE opticaltransceiver or 10/100/1000Base-T electrical transceiver), according to the networkspecifications.InstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-9PRELIMINARYPRELIMINARY
To install an SFP transceiver module into the 9764 CMCO SFP port:...................................................................................................................................................................................................1Firstly, carry out the following to attach the ESD wrist strap:•Attach the ESD strap over your wrist so that is in contact with your bare skin.•Momentarily touch the ESD clip onto a bare (unpainted) metal spot so that any builtup static charge is dissipated.•Attach the ESD clip to the MCO ground lug screw (the ground lug screw can beunscrewed slightly for easier ESD clip attachment)....................................................................................................................................................................................................2Remove the four screws holding the backhaul module onto the back of the 9764 CMCOand turn the module through 180° to access the SFP ports....................................................................................................................................................................................................3Remove the SFP transceiver module from its protective packaging. Check the label on theSFP transceiver module body to verify that you have the correct type and model for yournetwork.Important! Do not remove the SFP transceiver module dust plugs until directed to doso later in the procedure.InstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-10 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Insert SFP transceiver modules into SFP ports.If... Then... ViewYou are connecting a singlecable from the backhaul system.Align the backhaul electrical SFPtransceiver module with the SFP portlabelled “BH 1” and insert themodule into the socket until you feelthe connector latch into place.You are connecting a daisychain cable in addition to thecable from the backhaul system.Align the daisy chain optical SFPtransceiver module with the SFP portlabelled “BH 2” and insert themodule into the socket until you feelthe connector latch into place.Attention: If the SFP module resists as you insert it, do not force it. Remove themodule, turn it over, and try reinserting....................................................................................................................................................................................................5Push up and latch the SFP module locking bar into position to secure the SFP transceivermodule(s) into the port....................................................................................................................................................................................................6To check that each SFP transceiver module is seated and latched properly, grasp the SFPmodule and try to remove it without releasing the latch.If the SFP module cannot be removed, it is installed and seated properly. If the SFPmodule can be removed, reinsert it until the module is latched securely into the socket.Connect the Ethernet cableFollow these step to connect the electrical Ethernet backhaul cable to the SFP module inthe 9764 CMCO or the optional internal surge arrestor module (if installed)....................................................................................................................................................................................................1Obtain, from the packaging, the Alcatel-Lucent electrical Ethernet cable. The RJ45connector without connector cover should be used at the 9764 CMCO side.InstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-11PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Note: If an external surge arrestor is installed then use a short cable from the surgearrestor to the 9764 CMCO....................................................................................................................................................................................................2For increased cable connection within the cable gland, expose a section of screen braid(approximately 10 mm) by cutting through the cable jacket. The exposed section shouldmeasured from the leading edge of the RJ45 connector to the center of the exposed area....................................................................................................................................................................................................3Unscrew and remove the rounded compression nut from the cable gland located on thebottom of the bottom of the backhaul module.In the following order place the rounded compression nut, the cable seal and the strainrelief onto the Ethernet cable, as shown:923.5 1cm (+/- mm)inches (+/- 0. inches)Exposed screen braidapprox. 10 mm (0.4 inches)Glandcompression nutCable sealCable strainreliefInstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-12 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Pull the cable through the gland assembly parts until a connection is made between theexposed cable screen braid and the gland contact springs....................................................................................................................................................................................................5Feed the Ethernet cable through the gland opening on the backhaul module and insert theEthernet cable connector into the SFP transceiver in the port labelled “BH 1”....................................................................................................................................................................................................6Loosely insert the gland assembly into the gland housing.Note: The gland assembly with cable may need to be turned slightly in order to fullyslide into the gland housing before the compression nut can be screwed on.BH1 portBH2 portInstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-13PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................7Screw the rounded compression nut back onto the main body of the gland. Use anadjustable or open-end wrench to tighten the compression nut.Important! It is recommended that the compression nut is torqued to 2.5 N.m (22.1lb.in) in order to create a watertight seal and avoid a potential loose connection....................................................................................................................................................................................................8If you are daisy chaining two 9764 CMCO, feed optical Ethernet cable through thesecond backhaul module cable gland and insert the daisy chain Ethernet cable connectorinto the SFP transceiver in the port labelled “BH 2”....................................................................................................................................................................................................9Reattach the backhaul module to the 9764 CMCO using the four retention screws.Important! Ensure the backhaul module gasket is seated correctly in the groove onthe underside of the backhaul module. Tighten the four retention screws in thesequence shown. Recommended torque, 2.0 N.m (17.7 lb.in).BH1 portBH2 port4132InstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-14 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................10 Finally, secure the Ethernet cable to the wall or pole.Important! When securing cables ensure the following to avoid cable damage:•Secure cables with tie wraps. Use additional tie wraps wherever necessary forneatness•All cables should be run parallel with no twisting or tangled cables•Avoid excessive tension on the cable.Cable the optional external surge arrestorFollow these steps to connect the Ethernet cables to the external surge arrestor....................................................................................................................................................................................................1On the surge arrestor, unscrew the lower weatherized strain relief connector and lockingnut from the surge arrestor....................................................................................................................................................................................................2Carefully feed the end of Ethernet cable coming from the Customer Network InterfaceDevice through the unscrewed lower strain relief connector....................................................................................................................................................................................................3Plug the Ethernet cable RJ45 connector into the lower connector on the arrestor. Screwthe weatherized strain relief connector back onto the arrestor and tighten....................................................................................................................................................................................................4At the top of the arrestor, unscrew the upper weatherized strain relief connector from thesurge arrestor....................................................................................................................................................................................................5Carefully feed the end of Ethernet cable coming from the 9764 CMCO through the upperstrain relief connector....................................................................................................................................................................................................6Plug the Ethernet cable RJ45 connector into the upper connector on the arrestor. Screwthe weatherized strain relief connector back onto the arrestor and tighten....................................................................................................................................................................................................7Finally, secure the Ethernet cable to the wall/pole.InstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-15PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Important! When securing cables ensure the following to avoid cable damage:•Secure cables with tie wraps. Use additional tie wraps wherever necessary forneatness.•All cables should be run parallel with no twisting or tangled cables.•Avoid excessive tension on the cable.InstallationPre-installation cablingEthernet cabling - electrical........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-16 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
InstallationOverviewPurposeThis section provides the installation instructions for mounting the 9764 CMCO ontoeither a pole or wall with or without the optional tilt mechanism.ContentsPole mount the 9764 CMCO 4-18Pole mount the 9764 CMCO using optional tilt brackets 4-24Wall mount the 9764 CMCO 4-32Wall mount the 9764 CMCO using optional tilt brackets 4-38InstallationInstallationOverview........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-17PRELIMINARYPRELIMINARY
Pole mount the 9764 CMCOPurposeThis topic describes the procedures to be followed when installing the 9764 CMCO ontoa pole using pole bands.PrerequisitesA site survey has been conducted and a location for the device has been selected that isboth central to the public space and elevated in order to maximize coverage. Beforeinstallation begins you should ensure the following are in place:•Ensure adequate clearance is provided for service access.•Ground cable has been routed and the site grounding system is in place.•Backhaul cable has been routed and is in place.•Any site specific fixing materials are available (for example, bolts, washers and wallplug materials).Attention: The 9764 CMCO must be mounted with the appropriate mountinghardware suitable for the various supporting structures, building materials andconstruction methods. Following a site survey, it is the responsibility of the customerto ensure that:•The installation support structure is adequate and compliant with ICC IBC (2012):International Building Code, and all other national and local codes.•The appropriate mounting hardware and any necessary recommended supportinganchor fixings are used.Mounting requirements and materialsThe 9764 CMCO can be easily mounted onto a wooden or metal pole. Refer to thefollowing for the installation kits, anchor materials and tools for the installation type:•For pole mount refer to, “Pole mount installation requirements” (p. 3-5).•For a list of standard tools that may be required to support the installation, see “Toolsrequired for installation” (p. 3-3).Before you beginRecord the 9764 CMCO 18 digit serial number before mounting onto a pole.InstallationInstallationPole mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-18 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Pole mount the 9764 CMCOWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Perform the following procedure to pole mount the 9764 CMCO using standard polebands....................................................................................................................................................................................................1Refer to the equipment orientation plan and, at the selected installation point on the pole,mark the upper and lower position of the pole bands. Using digital compass determine theplanned left/right orientation of the 9764 CMCO mounting bracket around the pole andmark the center line of the left/right orientation on the pole....................................................................................................................................................................................................2Using the supplied stainless steel pole bands insert and thread the open band ends into theupper and lower slots on the reverse side of the mounting bracket....................................................................................................................................................................................................3At the marked installation point on the pole place the bands around the pole at thedetermined height. Carry out any required adjustment of the mounting bracket around thepole so that it is pointing in the desired direction.Upper banding slotsLower banding slotsInstallationInstallationPole mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-19PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4If... Then...A surge arrestor1is to bemounted on the poleObtain the surge arrestor bracket from the surge arrestor kit andposition the bracket lug behind either the upper or lower pole band.Surge arrestorbracketBanding lug Pole bandOnce the surge arrestor bracket is in the desired position, proceedwith the next step.A surge arrestor is notusedProceed with the next step.Notes:1. Although optional, Alcatel-Lucent strongly recommends for outdoor deployments, that whenthe backhaul connection is configured for electrical Ethernet (GBE 10/100/1000BaseT) asurge arrestor is installed, as the electrical SFP does not provide surge protection....................................................................................................................................................................................................5Once the mounting bracket is in the correct position and orientation tighten and secure thebands around the pole. Check the banding is secure, there is no movement of the bracketaround the pole and that the banding stubs (cut ends) are flattened down with a hammer.Note: Refer to BAND-IT®C00169 Hand Tool Operation Instructions, PO5886.InstallationInstallationPole mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-20 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................6To attach the 9764 CMCO to the mounting bracket open the mounting frame lever bypulling the lever outwards....................................................................................................................................................................................................7Align the mounting points on the reverse side of the 9764 CMCO with the mounting lugson the bracket. Attach the 9764 CMCO to the bracket by sliding the 9764 CMCOforwards and downwards onto the bracket mounting lugs....................................................................................................................................................................................................8Secure the 9764 CMCO onto the mounting frame by tightening the lever retaining screw.InstallationInstallationPole mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-21PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................9Finally, check the 9764 CMCO is correctly locked into position and there is no movementof the module on the mounting frame.Mount surge arrestor (optional)WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Although optional, Alcatel-Lucent strongly recommends for outdoor deployments, thatwhen the backhaul connection is configured for electrical Ethernet (GBE10/100/1000BaseT) a surge arrestor is installed, as the electrical SFP does not providesurge protection.Follow these steps to mount the optional external surge arrestor onto the surge arrestorbracket where the surge arrestor bracket has already been banded to a pole....................................................................................................................................................................................................1On the surge arrestor, unscrew the lower weatherized strain relief connector and lockingnut from the surge arrestor....................................................................................................................................................................................................2Site the surge arrestor onto the bracket so that the lower threaded Ethernet connectionpoint is positioned through the arrestor mounting hole.InstallationInstallationPole mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-22 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
...................................................................................................................................................................................................3Screw the arrestor locking nut back onto the arrestor and tighten so that the arrestor issecurely attached to the bracket.Standard pole mount exampleThe following figure depicts a 9764 CMCO standard pole mount using pole bands.How to continueAfter mounting the 9764 CMCO onto a pole the cables need to be connected. Continuewith the Chapter 5, “Cabling” chapter.Externalsurge arrestorInstallationInstallationPole mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-23PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Pole mount the 9764 CMCO using optional tilt bracketsPurposeThis topic describes the procedures to be followed when installing the 9764 CMCO ontoa pole using optional tilt brackets.PrerequisitesA site survey has been conducted and a location for the device has been selected that isboth central to the public space and elevated in order to maximize coverage. Beforeinstallation begins you should ensure the following are in place:•Ensure adequate clearance is provided for service access.•Ground cable has been routed and the site grounding system is in place.•Backhaul cable has been routed and is in place.•Any site specific fixing materials are available (for example, bolts, washers and wallplug materials).Attention: The 9764 CMCO must be mounted with the appropriate mountinghardware suitable for the various supporting structures, building materials andconstruction methods. Following a site survey, it is the responsibility of the customerto ensure that:•The installation support structure is adequate and compliant with ICC IBC (2012):International Building Code, and all other national and local codes.•The appropriate mounting hardware and any necessary recommended supportinganchor fixings are used.Mounting requirements and materialsThe 9764 CMCO can be easily mounted onto a wooden or metal pole. Refer to thefollowing for the installation kits, anchor materials and tools for the installation type:•For pole mount, refer to “Pole mount installation requirements” (p. 3-5).•For a list of standard tools that may be required to support the installation, see “Toolsrequired for installation” (p. 3-3).Before you beginRecord the 9764 CMCO 18 digit serial number before mounting onto a pole.InstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-24 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Attach pole brackets onto a poleWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Perform the following procedure attach the tilt bracket onto a pole....................................................................................................................................................................................................1Refer to the equipment orientation plan and, at the selected installation point on the pole,mark the upper and lower position of the pole bands. Using digital compass determine theplanned horizontal (left/right) orientation of the 9764 CMCO around the pole and markthe center line of the left/right orientation on the pole....................................................................................................................................................................................................2Using the supplied stainless steel pole bands insert and thread the open end of one bandinto the upper two slots on the tilt bracket.Taking the other steel band insert and thread the open end into the lower two slots on thetilt bracket.InstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-25PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................3Depending on the required vertical tilt orientation ensure the bracket is positioned thecorrect way up before placing on the pole:If... Then... View...upward vertical tilt isrequiredthe tilt bracket must bepositioned with the pivot pointat the topdownward vertical tilt isrequiredthe tilt bracket must bepositioned with the pivot pointat the bottom...................................................................................................................................................................................................4At the marked installation point on the pole wrap the upper and lower pole bands aroundthe pole at the determined height. Carry out any required adjustment of the tilt bracketaround the pole so that it is pointing in the desired direction....................................................................................................................................................................................................5If... Then...A surge arrestor1is to bemounted on the poleObtain the surge arrestor bracket from the surge arrestor kit andposition the bracket lug behind either the upper or lower pole band.Surge arrestorbracketBanding lug Pole bandOnce the surge arrestor bracket is in the desired position, proceedwith the next step.InstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-26 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
If... Then...A surge arrestor is notusedProceed with the next step.Notes:1. Although optional, Alcatel-Lucent strongly recommends for outdoor deployments, that whenthe backhaul connection is configured for electrical Ethernet (GBE 10/100/1000BaseT) asurge arrestor is installed, as the electrical SFP does not provide surge protection....................................................................................................................................................................................................6Once the tilt bracket is in the correct position and orientation tighten and secure the bandsaround the pole. Check the banding is secure, there is no movement of the bracket aroundthe pole and that the banding stubs (cut ends) are flattened down with a hammer.Note: Refer to BAND-IT®C00169 Hand Tool Operation Instructions, PO5886....................................................................................................................................................................................................7On the reverse side of the 9764 CMCO mounting bracket unscrew the M4 pole grips boltsand remove the upper and lower pole grips from the bracket....................................................................................................................................................................................................8Unscrew and remove the two upper M6 bolts and the one lower M6 bolt from the tiltbracket.InstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-27PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................9Position the 9764 CMCO mounting bracket against the front of the tilt bracket so that thetwo upper bolt holes and the single lower bolt hole on the 9764 CMCO mounting bracketare aligned with the bolts holes on the tilt bracket. From the 9764 CMCO mountingbracket side, screw in the two upper M6 bolts and lower M6 bolt to attach the brackets....................................................................................................................................................................................................10 To attach the 9764 CMCO to the mounting bracket open the mounting frame lever bypulling the lever outwards.Upper M6 bolts (x2) Lower M6 bolt (x1)InstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-28 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................11 Align the mounting points on the reverse side of the 9764 CMCO with the mounting lugson the bracket. Attach the 9764 CMCO to the bracket by sliding the 9764 CMCOforwards and downwards onto the bracket mounting lugs....................................................................................................................................................................................................12 Secure the 9764 9764 CMCO onto the mounting frame by tightening the lever retainingscrew.InstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-29PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................13 Finally, check the 9764 CMCO is correctly locked into position and there is no movementof the module on the mounting frame.Mount surge arrestor (optional)WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Although optional, Alcatel-Lucent strongly recommends for outdoor deployments, thatwhen the backhaul connection is configured for electrical Ethernet (GBE10/100/1000BaseT) a surge arrestor is installed, as the electrical SFP does not providesurge protection.Follow these steps to mount the optional external surge arrestor onto the surge arrestorbracket where the surge arrestor bracket has already been banded to a pole....................................................................................................................................................................................................1On the surge arrestor, unscrew the lower weatherized strain relief connector and lockingnut from the surge arrestor....................................................................................................................................................................................................2Site the surge arrestor onto the bracket so that the lower threaded Ethernet connectionpoint is positioned through the arrestor mounting hole.InstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-30 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
...................................................................................................................................................................................................3Screw the arrestor locking nut back onto the arrestor and tighten so that the arrestor issecurely attached to the bracket.Pole mount with tilt exampleThe following figure depicts a pole mounted 9764 CMCO with tilt installation using polebands.How to continueAfter mounting the 9764 CMCO onto a pole the cables need to be connected. Continuewith the Chapter 5, “Cabling” chapter.Externalsurge arrestorInstallationInstallationPole mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-31PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Wall mount the 9764 CMCOPurposeThis topic describes the procedures to be followed when installing the 9764 CMCO ontoa wall or solid flat surfacePrerequisitesA site survey has been conducted and a location for the device has been selected that isboth central to the public space and elevated in order to maximize coverage. Beforeinstallation begins you should ensure the following are in place:•Ensure adequate clearance is provided for service access.•Ground cable has been routed and the site grounding system is in place.•Backhaul cable has been routed and is in place.•Any site specific fixing materials are available (for example, bolts, washers and wallplug materials).Attention: The 9764 CMCO must be mounted with the appropriate mountinghardware suitable for the various supporting structures, building materials andconstruction methods. Following a site survey, it is the responsibility of the customerto ensure that:•The installation support structure is adequate and compliant with ICC IBC (2012):International Building Code, and all other national and local codes.•The appropriate mounting hardware and any necessary recommended supportinganchor fixings are used.Mounting requirements and materialsThe 9764 CMCO can be easily mounted onto solid concrete or wooden flat surface. Referto the following for the installation kits, anchor materials and tools for the installationtype:•For wall mount, refer to “Wall mount installation requirements” (p. 3-7).•For a list of standard tools that may be required to support the installation, see “Toolsrequired for installation” (p. 3-3).Before you beginRecord the 9764 CMCO 18 digit serial number before mounting onto a wall or flatsurface.InstallationInstallationWall mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-32 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Attach the mounting bracketWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Perform the following procedure to attach the 9764 CMCO mounting bracket directlyonto a wall or flat surface....................................................................................................................................................................................................1At the selected installation location, mark the points on the wall for the mounting bracketanchor holes. See drill hole pattern below to use as a guide:Tip: The 9764 CMCO mounting bracket can also be used as a template to mark thepoints on the wall for the fixing holes....................................................................................................................................................................................................2Check the horizontal marked position of the holes with a spirit level.75 mm3.0 inches190 mm7.5 inches75 mm3.0 inches190 mm7.5 inchesInstallationInstallationWall mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-33PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................3Drill two upper holes and two lower holes at the marked points to the appropriate depth.Insert screw anchor plugs into the drilled holes and, using a hammer, tap home until theplugs are flush with the wall....................................................................................................................................................................................................4Align the mounting bracket bolt holes with the drilled wall anchor holes. Screw in theupper and lower bolts into the wall fixings to the appropriate depth so that the mountingbracket is securely attached to the wall....................................................................................................................................................................................................5To attach the 9764 CMCO to the mounting bracket open the mounting frame lever bypulling the lever outwards....................................................................................................................................................................................................6Align the mounting points on the reverse side of the 9764 CMCO with the mounting lugson the bracket. Attach the 9764 CMCO to the bracket by sliding the 9764 CMCOforwards and downwards onto the bracket mounting lugs.InstallationInstallationWall mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-34 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................7Secure the 9764 9764 CMCO onto the mounting frame by tightening the lever retainingscrew....................................................................................................................................................................................................8Finally, check the 9764 CMCO is correctly locked into position and there is no movementof the module on the mounting frame.InstallationInstallationWall mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-35PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Mount surge arrestor (optional)WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Although optional, Alcatel-Lucent strongly recommends for outdoor deployments, thatwhen the backhaul connection is configured for electrical Ethernet (GBE10/100/1000BaseT) a surge arrestor is installed, as the electrical SFP does not providesurge protection.Follow these steps to attached the surge arrestor bracket to a wall and mount the optionalexternal surge arrestor onto the surge arrestor bracket....................................................................................................................................................................................................1At the selected mounting location for the surge arrestor, mark the points on the wall forthe mounting bracket anchor holes. See drill hole pattern below to use as a guide:Tip: The surge arrestor mounting bracket can be used as a template to mark the pointson the wall for the fixing holes....................................................................................................................................................................................................2Drill the upper hole and lower hole at the marked points to the appropriate depth. Insertscrew anchor plugs into the drilled holes and, using a hammer, tap home until the plugsare flush with the wall....................................................................................................................................................................................................3Align the surge arrestor mounting bracket bolt holes with the drilled wall anchor holes.Screw the upper and lower bolts into the wall fixings to the appropriate depth so that themounting bracket is securely attached to the wall.30 mm(1.2 inches)InstallationInstallationWall mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-36 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4On the surge arrestor, unscrew the lower weatherized strain relief connector and lockingnut from the surge arrestor....................................................................................................................................................................................................5Site the surge arrestor onto the bracket so that the lower threaded Ethernet connectionpoint is positioned through the arrestor mounting hole....................................................................................................................................................................................................6Screw the arrestor locking nut back onto the arrestor and tighten so that the arrestor issecurely attached to the bracket.Standard wall mount exampleThe following figure depicts a standard 9764 CMCO wall mount installation.How to continueAfter mounting the 9764 CMCO onto a wall or flat surface the cables need to beconnected. Continue with the Chapter 5, “Cabling” chapter.InstallationInstallationWall mount the 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-37PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Wall mount the 9764 CMCO using optional tilt bracketsPurposeThis topic describes the procedures to be followed when the 9764 CMCO is required tobe mounted onto a wall or solid flat surface using tilt brackets (vertical, horizontal orcombined horizontal/vertical).PrerequisitesA site survey has been conducted and a location for the device has been selected that isboth central to the public space and elevated in order to maximize coverage. Beforeinstallation begins you should ensure the following are in place:•Ensure adequate clearance is provided for service access.•Ground cable has been routed and the site grounding system is in place.•Backhaul cable has been routed and is in place.•Any site specific fixing materials are available (for example, bolts, washers and wallplug materials).Attention: The 9764 CMCO must be mounted with the appropriate mountinghardware suitable for the various supporting structures, building materials andconstruction methods. Following a site survey, it is the responsibility of the customerto ensure that:•The installation support structure is adequate and compliant with ICC IBC (2012):International Building Code, and all other national and local codes.•The appropriate mounting hardware and any necessary supporting anchor fixingsare used.Mounting requirements and materialsThe 9764 CMCO can be easily mounted onto solid concrete or wooden flat surface. Referto the following for the installation kits, anchor materials and tools for the installationtype:•For wall mount, refer to “Wall mount installation requirements” (p. 3-7).•For a list of standard tools that may be required to support the installation, see “Toolsrequired for installation” (p. 3-3).Before you beginRecord the 9764 CMCO 18 digit serial number before mounting onto a wall.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-38 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Tilt configurationsCarry out one of the following procedures depending on the required tilt installationconfiguration:If.. Then..Mounting for vertical tiltonlyCarry out the procedure, “Mount the vertical tilt and 9764CMCO brackets” (p. 4-39)Mounting for horizontal tiltonlyCarry out the procedure, “Mount combined horizontal/verticaltilt and 9764 CMCO brackets” (p. 4-47)Mounting for combinedhorizontal and vertical tiltCarry out the procedure, “Mount combined horizontal/verticaltilt and 9764 CMCO brackets” (p. 4-47)Mount the vertical tilt and 9764 CMCO bracketsWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Perform the following procedure to mount a vertical tilt bracket onto a flat surface or walland then attach the 9764 CMCO bracket....................................................................................................................................................................................................1At the selected installation location, mark the points on the wall for the tilt bracket anchorholes. See drill hole pattern below to use as a guide:InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-39PRELIMINARYPRELIMINARY
Note: If the vertical tilt bracket is available it can be placed against the wall and beused as a template to mark the points on the wall for the bracket anchor holes.Check the horizontal marked position of the holes with a level....................................................................................................................................................................................................2Drill two upper holes and two lower holes at the marked points to the appropriate depth.Insert screw anchor plugs into the drilled holes and, using a hammer, tap home until theplugs are flush with the wall....................................................................................................................................................................................................3Remove the two tilt angle positioning gauge bolts on either side of the vertical tilt bracketand allow the front part of the bracket to pivot away allowing easier access to the bracketanchor holes.52 mm2.0 inches270 mm10.6 inches2.0 inches10.6 inches52 mm270 mmTilt angle positioninggauge boltTilt angle positioninggauge boltBracket anchor holesBracket anchor holesInstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-40 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Depending on the required vertical tilt orientation ensure the bracket is positioned thecorrect way up before placing on the wall:If... Then... View...upward vertical tilt isrequiredthe tilt bracket must bepositioned with the pivot pointat the topdownward vertical tilt isrequiredthe tilt bracket must bepositioned with the pivot pointat the bottom...................................................................................................................................................................................................5Align the vertical tilt bracket bolt holes with the drilled wall anchor holes. Screw in theupper and lower bolts into the wall fixings to the appropriate depth so that the tilt bracketis securely attached to the wall.Recommended screw torque; 7.0 N.m (62.0 lb.in)....................................................................................................................................................................................................6Unscrew and remove the two upper and one lower M6 bolts from the vertical tilt bracketin readiness for attaching the 9764 CMCO bracket.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-41PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................7Next, on the reverse side of the 9764 CMCO mounting bracket unscrew the M4 pole gripsbolts and remove the upper and lower pole grips from the bracket....................................................................................................................................................................................................8Position the 9764 CMCO mounting bracket against the front of the tilt bracket so that thetwo upper bolt holes and the single lower bolt hole on the 9764 CMCO mounting bracketare aligned with the bolts holes on the tilt bracket.From the 9764 CMCO mounting bracket side, screw in the two upper M6 bolts and lowerM6 bolt to attach the 9764 CMCO mounting bracket to the vertical tilt bracket.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-42 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................9Once the brackets are mounted the 9764 CMCO can be attached. Continue with “Attach9764 CMCO to the mounting bracket” (p. 4-53).Mount the horizontal tilt and 9764 CMCO bracketsWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Perform the following procedure to mount a horizontal tilt bracket onto a flat surface orwall and then attach the 9764 CMCO bracket....................................................................................................................................................................................................1At the selected installation location, mark the points on the wall for the bracket anchorholes. See drill hole pattern below to use as a guide:InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-43PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Note: If the horizontal tilt bracket is available it can be placed against the wall and beused as a template to mark the points on the wall for the bracket anchor holes.Check the horizontal marked position of the holes with a level....................................................................................................................................................................................................2Drill two upper holes and two lower holes at the marked points to the appropriate depth.Insert screw anchor plugs into the drilled holes and, using a hammer, tap home until theplugs are flush with the wall....................................................................................................................................................................................................3Remove the two tilt angle positioning gauge bolts from the top and bottom of thehorizontal tilt bracket and swing the horizontal tilt bracket arms outwards allowing easieraccess to the bracket anchor holes.52 mm2.0 inches270 mm10.6 inches2.0 inches10.6 inches52 mm270 mmInstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-44 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Depending on the required horizontal tilt orientation ensure the bracket is the correct wayup before securing the bracket onto the wall:If... Then... View...left horizontal tilt is required the tilt bracket must bepositioned with the pivot pointon the leftright horizontal tilt is required the tilt bracket must bepositioned with the pivot pointon the right...................................................................................................................................................................................................5Align the horizontal tilt bracket bolt holes with the drilled wall anchor holes and screw inthe upper and lower bolts into the wall fixings to the appropriate depth so that the tiltbracket is securely attached to the wall.Swing the horizontal tilt bracket arms inwards and replace the two tilt angle positioninggauge bolts into the top and bottom of the horizontal tilt bracket.Tilt anglepositioning gauge boltTilt anglepositioning gauge boltBracket anchor holesBracket anchor holesInstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-45PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................6Unscrew and remove the two upper M6 bolts and the one lower M6 bolt from thehorizontal tilt bracket in readiness for attaching the 9764 CMCO bracket....................................................................................................................................................................................................7Position the 9764 CMCO mounting bracket against the front of the horizontal tilt bracketso that the two upper bolt holes and the single lower bolt hole on the 9764 CMCOmounting bracket are aligned with the bolts holes on the horizontal tilt bracket.From the 9764 CMCO mounting bracket side, screw in the two upper M6 bolts and lowerM6 bolt to attach the 9764 CMCO mounting bracket to the horizontal tilt bracket.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-46 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................8Once the brackets are mounted the 9764 CMCO can be attached. Continue with “Attach9764 CMCO to the mounting bracket” (p. 4-53).Mount combined horizontal/vertical tilt and 9764 CMCO bracketsWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Perform the following procedure to mount combined horizontal/vertical tilt brackets ontoa flat surface or wall and then attach the 9764 CMCO bracket....................................................................................................................................................................................................1At the selected installation location, mark the points on the wall for the bracket anchorholes. See drill hole pattern below to use as a guide:InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-47PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Note: If the horizontal tilt bracket is available it can be placed against the wall and beused as a template to mark the points on the wall for the bracket anchor holes.Check the horizontal marked position of the holes with a level....................................................................................................................................................................................................2Drill two upper holes and two lower holes at the marked points to the appropriate depth.Insert screw anchor plugs into the drilled holes and, using a hammer, tap home until theplugs are flush with the wall....................................................................................................................................................................................................3Remove the two tilt angle positioning gauge bolts from the top and bottom of thehorizontal tilt bracket and swing the horizontal tilt bracket arms outwards allowing easieraccess to the bracket anchor holes.52 mm2.0 inches270 mm10.6 inches2.0 inches10.6 inches52 mm270 mmInstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-48 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Depending on the required horizontal tilt orientation ensure the bracket is the correct wayup before securing the bracket onto the wall:If... Then... View...left horizontal tilt is required the tilt bracket must bepositioned with the pivot pointon the leftright horizontal tilt is required the tilt bracket must bepositioned with the pivot pointon the right...................................................................................................................................................................................................5Align the horizontal tilt bracket bolt holes with the drilled wall anchor holes and crew inthe upper and lower bolts into the wall fixings to the appropriate depth so that the bracketis securely attached to the wall.Swing the horizontal tilt bracket arms inwards and replace the two tilt angle positioninggauge bolts into the top and bottom of the horizontal tilt bracket.Tilt anglepositioning gauge boltTilt anglepositioning gauge boltBracket anchor holesBracket anchor holesInstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-49PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................6Remove the two tilt angle positioning gauge bolts on either side of the vertical tilt bracketand allow the front part of the bracket to pivot away allowing easier access to the bracketanchor holes....................................................................................................................................................................................................7Align the attachment holes on the vertical tilt bracket with the attachments holes on thehorizontal tilt bracket. Depending on the required vertical tilt orientation ensure thebracket is positioned the correct way up before attaching to the horizontal tilt bracket.If... Then... View...upward vertical tilt isrequiredthe tilt bracket must bepositioned with the pivot pointat the topTilt angle positioninggauge boltTilt angle positioninggauge boltBracket anchor holesBracket anchor holesInstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-50 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
If... Then... View...downward vertical tilt isrequiredthe tilt bracket must bepositioned with the pivot pointat the bottom...................................................................................................................................................................................................8Insert the two upper and two lower bolts through the attachment holes on the vertical tiltbracket and through the attachment holes on the horizontal tilt bracket.For each bolt, screw on the retaining nut. Using a 10 mm ratchet wrench, tighten the twoupper and two lower M6 retaining bolts so that the brackets are securely attached.Recommended screw torque; 7.0 N.m (62.0 lb.in)....................................................................................................................................................................................................9Unscrew and remove the two upper and one lower M6 bolts from the vertical tilt bracketin readiness for attaching the 9764 CMCO bracket.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-51PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................10 Next, on the reverse side of the 9764 CMCO mounting bracket unscrew the M4 pole gripsbolts and remove the upper and lower pole grips from the bracket....................................................................................................................................................................................................11 Position the 9764 CMCO mounting bracket against the front of the tilt bracket so that thetwo upper bolt holes and the single lower bolt hole on the 9764 CMCO mounting bracketare aligned with the bolts holes on the tilt bracket.From the 9764 CMCO mounting bracket side, screw in the two upper and one lower M6bolts to attach the 9764 CMCO mounting bracket to the vertical tilt bracket.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-52 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................12 Once the brackets are mounted the 9764 CMCO can be attached. Continue with “Attach9764 CMCO to the mounting bracket” (p. 4-53).Attach 9764 CMCO to the mounting bracketWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Perform the following procedure to attach the 9764 CMCO to the mounting bracket....................................................................................................................................................................................................1Open the mounting frame lever by pulling the lever outwards.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-53PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
...................................................................................................................................................................................................2Align the mounting points on the reverse side of the MCO Compact with the mountinglugs on the bracket. Attach the MCO Compact to the bracket by sliding the MCOCompact forwards and downwards onto the bracket mounting lugs....................................................................................................................................................................................................3Secure the MCO Compact onto the mounting frame by tightening the lever retainingscrew.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-54 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Finally, check the 9764 CMCO is correctly locked into position and there is no movementof the module on the mounting frame.Mount surge arrestor (optional)WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Although optional, Alcatel-Lucent strongly recommends for outdoor deployments, thatwhen the backhaul connection is configured for electrical Ethernet (GBE10/100/1000BaseT) a surge arrestor is installed, as the electrical SFP does not providesurge protection.Follow these steps to attached the surge arrestor bracket to a wall and mount the optionalexternal surge arrestor onto the surge arrestor bracket....................................................................................................................................................................................................1At the selected mounting location for the surge arrestor, mark the points on the wall forthe mounting bracket anchor holes. See drill hole pattern below to use as a guide:Tip: The surge arrestor mounting bracket can be used as a template to mark the pointson the wall for the fixing holes.30 mm(1.2 inches)InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-55PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
...................................................................................................................................................................................................2Drill the upper hole and lower hole at the marked points to the appropriate depth. Insertscrew anchor plugs into the drilled holes and, using a hammer, tap home until the plugsare flush with the wall....................................................................................................................................................................................................3Align the surge arrestor mounting bracket bolt holes with the drilled wall anchor holes.Screw the upper and lower bolts into the wall fixings to the appropriate depth so that themounting bracket is securely attached to the wall....................................................................................................................................................................................................4On the surge arrestor, unscrew the lower weatherized strain relief connector and lockingnut from the surge arrestor....................................................................................................................................................................................................5Site the surge arrestor onto the bracket so that the lower threaded Ethernet connectionpoint is positioned through the arrestor mounting hole....................................................................................................................................................................................................6Screw the arrestor locking nut back onto the arrestor and tighten so that the arrestor issecurely attached to the bracket.Wall mount with horizontal/vertical tilt exampleThe following figure depicts a 9764 CMCO wall mount installation withhorizontal/vertical tilt.Wall mount horizontal tilt only Wall mount horizontaland vertical tiltInstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-56 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
How to continueAfter mounting the 9764 CMCO onto a wall the cables need to be connected. Continuewith the Chapter 5, “Cabling” chapter.InstallationInstallationWall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 4-57PRELIMINARYPRELIMINARY
Installation Wall mount the 9764 CMCO using optional tilt brackets........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-58 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
55CablingOverviewPurposeThis chapter provides instructions for routing and connecting the following cables to the9764 CMCO:•Ground cable•External RF antenna cable•External GPS antenna cable•Power cableContentsConnect ground cable 5-2Connect RF antennas 5-4Connect GPS antenna 5-8Connect power cable 5-12...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-1PRELIMINARYPRELIMINARY
Connect ground cablePurposeFollow this procedure to connect the ground cable to the 9764 CMCO.Before you beginEnsure the following:•All site preparation activities for cabling have been completed.•All installation procedures for the 9764 CMCO have been completed.StepsNote: The 9764 CMCO must be grounded with a 16 mm2ground cable (TypeNYY-1x16 mm2or similar) to a grounding system.The grounding cable is not included in the delivery and must be locally supplied.To attach the ground cable perform the following steps:...................................................................................................................................................................................................1Route the ground cable from the ground system to the 9764 CMCO....................................................................................................................................................................................................2At the 9764 CMCO, cut the cable to a proper length, strip the cable end and crimp a2-hole ground lug, with holes suitable for M6 screws, on the end of the cable.Clean the contact surface area and use antioxidant to avoid oxidation....................................................................................................................................................................................................3Connect the ground lug to the grounding point on the 9764 CMCO using the supplied M6screws, lock washers, and flat washers. Use antioxidant at the grounding pads.Cabling Connect ground cable........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Finally, secure the grounding cable to the wall or pole.Figure 5-1 Position of grounding pointDouble lugground pointCabling Connect ground cable........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-3PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Connect RF antennasPurposeTwo RF antenna connectors are located externally on the top of the 9764 CMCO, givingthe service provider the option of either connecting an attached RF antenna or connectingto two externally cabled RF antennas.Use this procedure to connect RF antenna cables to the 9764 CMCO.Note: Alcatel-Lucent supplies the attached RF antenna attached to a solar shield.Alcatel-Lucent does not supply external RF antennas for the 9764 CMCO.Before you beginEnsure that the following tools are available:•Adjustable (crescent) wrenches•Torque ratchet (socket wrench)•Items such as crimping tools that are appropriate for attaching a new cable connectorto the RF antenna cable•Protective eye wearSafety statementsWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.These admonishments apply throughout this procedure. Refer to the Safety statementschapter for general safety information.Connect attached RF antennasUse this procedure to attach and connect the attached RF antenna....................................................................................................................................................................................................1If a solar shield (without an RF antenna attached) is already attached to the 9764 CMCO,then remove the solar shield from the 9764 CMCO by pressing the two levers (1 in thefigure below) and sliding the solar shield (2 in the figure) upwards. No tools are requiredto do this.Cabling Connect RF antennas........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................2Attach the solar shield (to which the RF antenna is fixed) to the 9764 CMCO by placing iton the front of the 9764 CMCO and sliding it downwards until a click is heard....................................................................................................................................................................................................3Locate the N-type RF antenna connectors on the top of the 9764 CMCO....................................................................................................................................................................................................4Connect each antenna cable by pushing the antenna cable connector onto the N-typeconnector on the top of 9764 CMCO and firmly tighten the connectors by hand.RF antennaconnector(N-type)RF antennaconnector(N-type)9764 Compact MCO (top view)Cabling Connect RF antennas........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-5PRELIMINARYPRELIMINARY
Connect external RF antennasUse this procedure to connect external RF antennas....................................................................................................................................................................................................1Refer to the RF antenna mounting instructions included with the RF antenna kit for thesteps to mount the antennas....................................................................................................................................................................................................2Locate the N-type RF antenna connectors on the top of the 9764 CMCO.RF antenna connectorSolar shieldRF antennaRF antenna connectorLever LeverRF antennaconnector(N-type)RF antennaconnector(N-type)9764 Compact MCO (top view)Cabling Connect RF antennas........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
...................................................................................................................................................................................................3Connect each RF adapter cable by pushing the adapter cable connector onto the 9764CMCO N-type connector until it clicks into place.Cabling Connect RF antennas........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-7PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Connect GPS antennaPurposeUse this procedure to connect an external (remote) GPS antenna cable to the 9764CMCO.Integrated GPS antennaThe 9764 CMCO is supplied with an integrated GPS antenna attached to the top of theMCO, and connected to the QMA connector on the top of the MCO. The integrated GPSantenna is a part of the 9764 CMCO and must not be removed, even if you are intend toconnect an external GPS antenna.External GPS antennaThe following figure shows the external GPS antenna and its mounting kit:Figure 5-2 External GPS antenna configurationGPS adaptor cable9764 Compact MCOGPS antenna cableGPS antennamounting kitExternal GPS antennaCabling Connect GPS antenna........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Before you beginEnsure that the following tools are available:•Adjustable (crescent) wrenches•Torque ratchet (socket wrench)•Items such as crimping tools that are appropriate for attaching a new cable connectorto the GPS cable•Protective eye wearImportant! Do not mount the GPS antenna within 10 feet (3 m) of any transmitantenna.Safety statementsWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.These admonishments apply throughout this procedure. Refer to the Safety statementschapter for general safety information.Connect external GPS antenna...................................................................................................................................................................................................1Refer to the GPS antenna mounting instructions included with the GPS antenna kit for thesteps to mount the antenna....................................................................................................................................................................................................2Locate the GPS antenna connector on the top of the 9764 CMCO.Figure 5-3 External GPS antenna connectorCabling Connect GPS antenna........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-9PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................3Disconnect the integrated GPS antenna cable from the GPS antenna connector on the topof the MCO....................................................................................................................................................................................................4Connect the GPS adapter cable by pushing the adapter cable connector onto the 9764CMCO QMA-type GPS antenna connector until it clicks into place....................................................................................................................................................................................................5Apply weatherizing tape at the point indicated by the red arrows shown in the followingfigure:Cable connectorMCO QMA connectorCabling Connect GPS antenna........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-10 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
First, apply Linerless rubber splicing tape, then apply vinyl electrical tape over theLinerless rubber splicing tape.Cabling Connect GPS antenna........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-11PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Connect power cablePurposeThis topic describes the procedures to be followed when connecting the power cable tothe 9764 CMCO.ConnectionsThe following figure shows the power connection interface of the 9764 CMCO:Power cableThe 9764 CMCO is equipped with a Standard IEC60320 C16 power socket. TheAlcatel-Lucent supplied power cable and connector should be used with this equipment.Before you beginDepending on whether your 9764 CMCO requires AC or DC power, select theappropriate procedure from the following table:If... Then follow this procedureyour MCO requires AC power “Connect AC power cord” (p. 5-13)your MCO requires DC power “Connect DC power cord” (p. 5-14)Figure 5-4 Power connection interfacePower connector(connector attached)9764 Compact MCO (top view)Cabling Connect power cable........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-12 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
In the United States and Canada, outdoor cords, whether installed as cord pendants orwith mating plug/receptacles, shall comply with NEC Article 400 or Canadian ElectricalCode, Part I Rule 4-012.Connect AC power cordDANGERElectric-shock hazardSince the 9764 CMCO operates on 120-220 V AC, the risk of serious injury or death fromelectrocution exists throughout this procedure.Follow the first step of this procedure carefully and completely.WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment....................................................................................................................................................................................................1Ensure that the power that feeds the AC power cable to the 9764 CMCO is OFF, andblock access so that no one can restore power to that cable during this procedure....................................................................................................................................................................................................2Plug the AC power connector on the power cord into the power connector on the top ofthe 9764 CMCO module....................................................................................................................................................................................................3Fix the AC power connector in position by tightening the screw on the AC powerconnector. Using a screwdriver with a Phillips head, torque to 0.4 Nm (0.295 lb ft).Power connectionpoint on 9764 CMCOCabling Connect power cable........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-13PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................4Lower the power connector cover over the power connector, align the captive TORXM3x5 attachment screw on the power connector cover with the screw hole in the 9764CMCO, and fix the power connector cover in position by inserting the screw into thescrew hole and tightening.Connect DC power cordDANGERElectric-shock hazardSince the 9764 CMCO operates on DC power, the risk of serious injury or death fromelectrocution exists throughout this procedure.Follow the first step of this procedure carefully and completely.WARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Captive TORXM3x5 screwPower connectorcoverCabling Connect power cable........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-14 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
...................................................................................................................................................................................................1Ensure that the power that feeds the DC power cable to the 9764 CMCO is OFF, andblock access so that no one can restore power to that cable during this procedure....................................................................................................................................................................................................2Plug the DC power connector on the power cord into the power connector on the top ofthe 9764 CMCO module....................................................................................................................................................................................................3Fix the DC power connector in position by tightening the screw on the DC powerconnector. Using a screwdriver with a Phillips head, torque to 0.4 Nm (0.295 lb ft)....................................................................................................................................................................................................4Lower the power connector cover over the power connector, align the captive TORXM3x5 attachment screw on the power connector cover with the screw hole in the 9764CMCO, and fix the power connector cover in position by inserting the screw into thescrew hole and tightening.Power connectionpoint on 9764 CMCOCaptive TORXM3x5 screwPower connectorcoverCabling Connect power cable........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 5-15PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Cabling Connect power cable........................................................................................................................................................................................................................................................................................................................................................................................................................................................................5-16 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
66Post-installationOverviewPurposeThis chapter provides post-installation information and activities that should be carriedout after the Alcatel-Lucent 9764 Compact Metro Cell Outdoor has been installed.ContentsFinal installation activities and checks 6-2...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction 6-1PRELIMINARYPRELIMINARY
Final installation activities and checksOverviewThis topic describes the final Alcatel-Lucent 9764 Compact Metro Cell Outdoorinstallation activities and checks to be carried out.Final installation checksBefore leaving the installation site, check the following:...................................................................................................................................................................................................1Check the overall installation. Verify that mounted equipment is secure and that nounintentional mechanical alteration has occurred to either the equipment itself or theinstallation infrastructure....................................................................................................................................................................................................2Ensure all the exterior connections are secure....................................................................................................................................................................................................3Ensure all cables are secured along their routes....................................................................................................................................................................................................4Finally, inspect the site for loose tools, materials, and parts. Remove all such loose tools,materials, and parts.Post-installation Final installation activities and checks........................................................................................................................................................................................................................................................................................................................................................................................................................................................................6-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Appendix A: 9764 CMCO servicepositionOverviewPurposeThis appendix provides instructions on how to place the 9764 CMCO into the serviceposition, allowing access to the backhaul module.Contents9764 CMCO service position A-2...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction A-1PRELIMINARYPRELIMINARY
9764 CMCO service positionWhen to useUse the following procedures to place the 9764 CMCO in and out of the service position.Placing the 9764 CMCO into the service positionCarry out the following to place the 9764 CMCO into the service position:...................................................................................................................................................................................................1Unscrew the mounting lever retaining screw....................................................................................................................................................................................................2Lift the 9764 CMCO and remove it from the bracket....................................................................................................................................................................................................3Turn the 9764 CMCO through 90° and align the mounting points on the side of the 9764CMCO with the mounting lugs on the bracket....................................................................................................................................................................................................4Attach the 9764 CMCO to the bracket by sliding the 9764 CMCO forwards anddownwards onto the bracket mounting lugs.Lever retaining screw9764 CMCO service position 9764 CMCO service position........................................................................................................................................................................................................................................................................................................................................................................................................................................................................A-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................5Secure the 9764 CMCO onto the mounting frame by tightening the lever retaining screw.Placing the 9764 CMCO into the normal positionCarry out the following to place the 9764 CMCO into the normal position:...................................................................................................................................................................................................1Unscrew the mounting lever retaining screw....................................................................................................................................................................................................2Lift the 9764 CMCO and remove it from the bracket....................................................................................................................................................................................................3Turn the 9764 CMCO through 90° and align the mounting points on the back of the 9764CMCO with the mounting lugs on the bracket.Lever retaining screw9764 CMCO service position 9764 CMCO service position........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction A-3PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
...................................................................................................................................................................................................4Attach the 9764 CMCO to the bracket by sliding the 9764 CMCO forwards anddownwards onto the bracket mounting lugs....................................................................................................................................................................................................5Secure the 9764 CMCO onto the mounting frame by tightening the lever retaining screw.9764 CMCO service position 9764 CMCO service position........................................................................................................................................................................................................................................................................................................................................................................................................................................................................A-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
Appendix B: LED StateDescriptionOverviewPurposeThis chapter describes the LED status and descriptions for 9764 CMCO.ContentsLED status for 9764 CMCO B-2...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction B-1PRELIMINARYPRELIMINARY
LED status for 9764 CMCOLocation of LEDThe following figure shows the location of the LED on the back of the 9764 CMCO:Hardware LED interpretation tableThe following table describes the possible states for the single bi-color LED:Table B-1 LED statusesState Description LEDPower off Power off OFFInitial state Power on or Restart ON (Red)Software downloading duringsystem initializationSoftware downloading Blinking (Green)Failure 9764 CMCO LTE start-up oroperational failureON (Red)9764 CMCO LTE becomesoperational9764 CMCO LTE becomingoperationalON (Green)9764 CMCO LTE isoperational9764 CMCO LTE has been instable operation for 15minutesOFFLED State Description LED status for 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................B-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Appendix C: Installation of the9764 MCO Wi-Fi APOverviewPurposeThis appendix provides instructions for attaching the 9764 MCO Wi-Fi AP to the 9764MCO.The 9764 MCO Wi-Fi AP is optional. If you do not have a 9764 MCO, then do notperform the procedures in this appendix.9764 MCO Wi-Fi AP V1.0 does not support B41 Compact Metro Cells.ContentsPhysical description - external 9764 MCO Wi-Fi AP module C-29764 MCO Wi-Fi AP pre-installation information C-9Attach 9764 MCO Wi-Fi AP module to 9764 CMCO C-10LED state description - external Wi-Fi AP module C-13...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-1PRELIMINARYPRELIMINARY
Physical description - external 9764 MCO Wi-Fi AP moduleProduct overviewThe 9764 MCO Wi-Fi AP is housed in a weatherized enclosure containing the followingactive components:•Integrated antennas supporting 2x2 MIMO.This figure reflects the location of the 9764 MCO Wi-Fi AP when attached to thetechnology-specific module (9764 MCO WCDMA module or 9764 MCO LTE module)of the Alcatel-Lucent 9764 Metro Cell Outdoor, or to the Alcatel-Lucent 9764 CompactMetro Cell Outdoor.These 9764 MCO hardware variants are designed to be deployed close to the users,usually on light poles or on walls of buildings.Figure C-1 9764 MCO Wi-Fi AP attached to 9764 MCO hardware variantsInstallation of the 9764 MCO Wi-Fi AP Physical description - external 9764 MCO Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
This figure reflects the available 9764 MCO Wi-Fi AP models (9764 Metro Cell OutdoorWi-Fi AP V1.0 HG [high gain] and 9764 Metro Cell Outdoor Wi-Fi AP V1.0 MG[medium gain]).Figure C-2 9764 MCO Wi-Fi AP - closed housingInstallation of the 9764 MCO Wi-Fi AP Physical description - external 9764 MCO Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-3PRELIMINARYPRELIMINARY
This figure reflects the major components of both the High-gain and Medium-gainmodels of the 9764 MCO Wi-Fi AP.The physical dimensions of the 9764 MCO Wi-Fi AP module are:Table C-1 9764 MCO Wi-Fi AP physical characteristicsPhysical property 9764 MCO Wi-Fi AP V1.0MG model9764 MCO Wi-Fi AP V1.0HG modelDimension (Height x Widthx Depth)5cm x 13cm x 7cm 9cm x 13cm x 7cmVolume 0.5 liters 0.8 litersWeight 0.35 kg 0.4 kgFigure C-3 9764 MCO Wi-Fi AP - cutaway viewInstallation of the 9764 MCO Wi-Fi AP Physical description - external 9764 MCO Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Product base items and configurationsThe 9764 MCO Wi-Fi AP module is a single, field-replaceable, unit that may be mountedto many Alcatel-Lucent 9764 Metro Cell Outdoor variants.Available models include:•9764 Metro Cell Outdoor Wi-Fi AP V1.0 HG (contains High-gain integratedantennas)•9764 Metro Cell Outdoor Wi-Fi AP V1.0 MG (contains Medium-gain integratedantennas)The unit is shipped with three M3 10mm Torx screws used to secure the 9764 MCOWi-Fi AP module to the 9764 MCO module.Connection interfacesThe 9764 MCO Wi-Fi AP module has a single interface connector that plugs into the backbottom of the technology-specific module (9764 MCO WCDMA module or 9764 MCOLTE module) of the Alcatel-Lucent 9764 Metro Cell Outdoor or the Alcatel-Lucent 9764Compact Metro Cell Outdoor, carrying both power and all communication between thetwo components.Installation of the 9764 MCO Wi-Fi AP Physical description - external 9764 MCO Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-5PRELIMINARYPRELIMINARY
This figure reflects the connection point on the back bottom of the supported 9764 MCOhardware variants.This figure provides a cutaway side view of the 9764 MCO Wi-Fi AP module whenconnected to a 9764 MCO hardware variant.Figure C-4 9764 MCO Wi-Fi AP connection point on 9764 MCOFigure C-5 9764 MCO Wi-Fi AP connected to 9764 MCO (cutaway side view)Installation of the 9764 MCO Wi-Fi AP Physical description - external 9764 MCO Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
AntennasThe 9764 MCO Wi-Fi AP supports two integrated antennas optimized for 2x2 MIMOwith up to two spatial streams.Two hardware models are available:•9764 MCO Wi-Fi AP V1.0 MG with Medium-gain integrated antennas.•9764 MCO Wi-Fi AP V1.0 HG with High-gain integrated antennas.Co-location and interferenceFor Metro Cells with a fixed integrated antenna and an attached Wi-Fi AP module,antenna interference is mitigated due to antenna isolation achieved by the hardwaredesign.For 9764 Compact Metro Cells using external LTE antennas and an attached Wi-Fi APmodule, antenna interference is mitigated when antenna isolation between the Wi-Fi APand the LTE antennas is at least -42 dB.Status indicatorsThere is an external single bi-color LED (red/green) on the upper side of the 9764 MCOWi-Fi AP housing (pointing up towards the 9764 MCO LTE/WCDMA module radome).Although external, this LED is not easily visible and is not used for post-installationtroubleshooting. During initial cell power-up, however, the installation technician mayobserve the LED changes as the unit goes through its booting sequences. Once the cell isin normal operation for 30 minutes, the LED will turn off automatically.Refer to “LED state description - external Wi-Fi AP module” (p. C-13) for details.The 9764 MCO Wi-Fi AP is monitored/managed remotely at the Alcatel-Lucent 9772Wi-Fi Service Controller.Product labelingTo the top of the 9764 MCO Wi-Fi AP will be affixed three labels:1. A product label reflecting:•Vendor name/Icon•Customer ID•Model name•Part number•Lock / Unlock mode iconNote: The “Unlock” icon applies only to units designated as R&D lab mode.•Serial number•MAC addressInstallation of the 9764 MCO Wi-Fi AP Physical description - external 9764 MCO Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-7PRELIMINARYPRELIMINARY
•CLEI code (U.S. only)•Data matrix barcode (2D MicroPDF Symbol) for Part number, Serial number,MAC address, and CLEI code (CLEI code is for U.S. only)2. A regulatory label reflecting:•Vendor name/Icon•Product name•Regulatory rules•Power input•Enclosure rating•Applicable regulatory and environmental certification logos (for example, CE andWEEE recycling logos)•Manufacturer name3. (NAR only) An FCC label reflecting:•Vendor name/Icon•FCC IDInstallation of the 9764 MCO Wi-Fi AP Physical description - external 9764 MCO Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
9764 MCO Wi-Fi AP pre-installation informationProduct delivery contentsThe following items are supplied with the 9764 MCO Wi-Fi AP:•The 9764 MCO Wi-Fi AP module•Three M3 10mm Torx screws (to secure the 9764 MCO Wi-Fi AP module to the 9764MCO module).Variable parts and ancillary itemsIn addition to the standard delivered parts, the following variable and ancillary items areavailable:•There are no ancillary parts for the 9764 MCO Wi-Fi AP.Installation tools requiredThe following tools may be used during installation:•Snips•Screwdrivers (power and/or manual):– Phillips (flat blade)– Torx (T10)Installation of the 9764 MCO Wi-Fi AP 9764 MCO Wi-Fi AP pre-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-9PRELIMINARYPRELIMINARY
Attach 9764 MCO Wi-Fi AP module to 9764 CMCOPurposeThis topic describes the procedures to attach the 9764 MCO Wi-Fi AP module to theAlcatel-Lucent 9764 Compact Metro Cell Outdoor.PrerequisitesBefore installation begins, ensure the following:•T10 Torx screwdriver (power and/or manual) is available.•Internet service is available.Attach 9764 MCO Wi-Fi AP module to 9764 CMCOPerform the following steps to attach the 9764 MCO Wi-Fi AP module to 9764 CMCO:...................................................................................................................................................................................................1Remove the 9764 MCO Wi-Fi AP module from its packaging....................................................................................................................................................................................................2Using a T10 Torx screwdriver, remove the cover over the Wi-Fi AP connector on thelower back of the 9764 CMCO by unscrewing the three screws.Important! Ensure that the appropriate gasket surrounding the connector is in placeon the 9764 CMCO.Note: Retain the cover and the three (3) cover screws. Should the need arise toremove but not replace the 9764 MCO Wi-Fi AP module in the future, the dummycover and its screws must be reattached to the 9764 CMCO....................................................................................................................................................................................................3Push the 9764 MCO Wi-Fi AP module onto the Wi-Fi AP connector....................................................................................................................................................................................................4Using a T10 Torx screwdriver and the three M3 10mm Torx screws shipped with the 9764MCO Wi-Fi AP module, screw the attachment plate to the 9764 CMCO and to the back ofthe 9764 MCO Wi-Fi AP module, and tighten all screws.Torque screws to 0.6 Nm (0.443 lb ft).Installation of the 9764 MCO Wi-Fi AP Attach 9764 MCO Wi-Fi AP module to 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-10 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARYEND OF STEPS...................................................................................................................................................................................................
9764 MCO Wi-Fi AP integration overviewIntegration refers to the entire process from hardware installation to “normal operation”.9764 MCO Wi-Fi AP integration proceeds as follows:1. Hardware is installed.The 9764 MCO Wi-Fi AP module is physically installed on the 9764 CMCO , and the9764 CMCO is installed and all cabling completed.2. Power is applied to the 9764 CMCO (and by default, to the 9764 MCO Wi-Fi APmodule).3. The switch on the 9764 CMCO contains a default configuration that connects the9764 MCO Wi-Fi AP port to the backhaul port (there are no 9764 MCO Wi-Fi APOAM parameters to be configured prior to initial power-up).The switch will forward Wi-Fi packages as soon as the 9764 CMCO software hasbooted and as soon as the 9764 MCO Wi-Fi AP software is running.4. A connection between 9764 MCO Wi-Fi AP and Alcatel-Lucent 9772 Wi-Fi ServiceController (9772 Wi-Fi SC) is automatically established.5. The 9764 MCO Wi-Fi AP downloads the latest software version from the appropriatefile server (if applicable).6. The 9764 MCO Wi-Fi AP is provisioned and configured via the 9772 Wi-Fi SC.A 30-minute timer is started after the configuration is sent successfully from the 9772Wi-Fi SC. During this 30 minutes, the LED on top of the 9764 MCO Wi-Fi APmodule illuminates and is visible through the narrow gap between the bottom of the9764 MCO and the top of the 9764 MCO Wi-Fi AP module.For information on the 9772 Wi-Fi SC, refer to the documents listed in the followingtable:Refer to this document At this location For more information onAlcatel-Lucent 9772 Wi-FiService Controller V1.0 LHardware Installation,3MN-01840-0001- RJZZA(http://support.alcatel-lucent.com)Instructions for installing the9772 WiSC-L hardware andaccessing its managementinterfaces.Alcatel-Lucent 9764 and9772 Metro Cell OutdoorWi-Fi AP and Wi-Fi ServiceController, Release WA5.5,System Reference Guide,3MN-01840-0002-RKZZA(http://support.alcatel-lucent.com)Instructions for accessingand using the web-basedgraphic user interface (GUI)to manage/administer the9772 Wi-Fi ServiceController and 9764 MCOWi-Fi Access PointInstallation of the 9764 MCO Wi-Fi AP Attach 9764 MCO Wi-Fi AP module to 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-11PRELIMINARYPRELIMINARY
Refer to this document At this location For more information onAlcatel-Lucent 9764 and9772, Metro Cell OutdoorWi-Fi AP and Wi-Fi ServiceController, Release WA 5.5,CLI Reference Guide,3MN-01840-0003-RKZZA(http://support.alcatel-lucent.com)Instructions for accessingand using command lineinterface (CLI) tomanage/administer the 9772Wi-Fi Service Controllerand 9764 MCO Wi-FiAccess Point.7. The field technician may choose to observe the LED colors and blinking patterns toensure error-free boot-up and normal operation. Refer to “LED state description -external Wi-Fi AP module” (p. C-13) for details.- If normal operation is achieved, then the LED is automatically turned off when the30-minute timer expires.- If there are problems, then the LED displays the applicable error color/pattern. Referto “LED state description - external Wi-Fi AP module” (p. C-13) for details.8. The field technician will make the first test call – provided all necessary core networkelements (NEs) are configured properly (for example, WLAN GW, AAA, etc.).Installation of the 9764 MCO Wi-Fi AP Attach 9764 MCO Wi-Fi AP module to 9764 CMCO........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-12 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
LED state description - external Wi-Fi AP moduleOverviewThe externally-attached Wi-Fi AP module (supported on some Alcatel-Lucent 9764 MetroCell products) has a single external bi-color LED (red/green) on the top of the modulehousing. Due to limited visibility requiring direct line-of-site between the Wi-Fi APmodule housing and the host Small Cell housing, the LED is not intended for ongoingtroubleshooting after the unit has been successfully deployed. However, the fieldtechnician installing/replacing the externally-attached Wi-Fi AP module may watch theLED during boot-up if desired.The LED illuminates with different colors and blinking patterns during boot-up, then isautomatically turned off after normal operation has been achieved and the 30-minutetimer expires. If there are problems, then the LED displays the applicable errorcolor/pattern.LED statuses during boot-upTip: In the following table, note that “Slow blinking” refers to an LED blink cycle of2500 ms on, 2500 ms off; “Fast blinking” refers to an LED blink cycle of 500 ms on,500 ms off.After the Wi-Fi AP hardware has been installed, upon power-up the LED reflects Wi-FiAP statuses as follows:Table C-2 Wi-Fi AP LED states during boot-upInstallation /commissioningstepWi-Fi AP State Red LEDsegmentGreen LEDsegmentCombined LEDbehavior1. Power-up withautotestBOOTING Solid On Off Solid On (appears red)2. Wi-Fi AP tries toget adopted by the9772 Wi-Fi ServiceControllerADOPTING Solid On Solid On Solid On (appearsorange)3. (optional) 9772Wi-Fi ServiceController pushes asoftware upgradeUPGRADING Off Solid On Solid On (appearsgreen)4. WLANs aremapped to radios,normal serviceOPERATIONAL Service on 5GHz: SlowblinkingService on 2.4GHz: SlowblinkingWith both radiosoperating: slow orangeblinkingInstallation of the 9764 MCO Wi-Fi AP LED state description - external Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-13PRELIMINARYPRELIMINARY
Table C-2 Wi-Fi AP LED states during boot-up (continued)Installation /commissioningstepWi-Fi AP State Red LEDsegmentGreen LEDsegmentCombined LEDbehavior5. After 30 minutesin the same state(Note: the LEDtimeout defaultsetting is 30minutes, but isconfigurable by theAdministrator toany value from 15to 1440 minutes.)HIDING Off Off OffLED functionality during OPERATIONAL statesThe 2 9764 MCO Wi-Fi AP radios are mapped to a color segment of the LED:•Radio 1 (2.4 GHz) maps to the GREEN segment.•Radio 2 (5 GHz) maps to the RED segment.There are 2 factors that affect the LED segment that is associated with each radio:•If the radio is disabled (shutdown) or not by the administrator (this factor takesprecedence).•If a WLAN is mapped to the radio, making the radio usable.If a radio has at least a WLAN mapped to it and it is enabled, then it is operational(meaning, it will beacon and provide client service).Tip: In the following tables, note that “Slow blinking” refers to an LED blink cycle of2500 ms on, 2500 ms off; “Fast blinking” refers to an LED blink cycle of 500 ms on,500 ms off. An asterisk (*) means that the setting does not matter.Table C-3 9764 MCO Wi-Fi AP LEDs based on Admin status and WLAN mappingRadio's Admin status Radio's WLAN mapping LED segmentDisabled * OffEnabled no WLAN mapped Fast blinkingEnabled WLAN mapped Slow blinkingInstallation of the 9764 MCO Wi-Fi AP LED state description - external Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-14 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Table C-4 9764 MCO Wi-Fi AP LEDs during normal operation statesRADIO 1 / 2.4 GHz / GREEN LEDSegmentRADIO2/5GHz/REDLEDSegment COMBINEDLEDBehaviorAdminstatusWLANmappingSegmentBehaviorAdminstatusWLANmappingSegmentBehaviorDisabled * Off Disabled * Off OffEnabled no WLAN Fast Disabled * Off Fast GreenWLAN Slow Slow GreenDisabled * Off Enabled no WLAN Fast Fast Red* WLAN Slow Slow RedEnabled no WLAN Fast Enabled no WLAN Fast Fast OrangeWLAN Slow WLAN Slow Slow OrangeWLAN Slow no WLAN Fast Fast Red +Slow Green(results in agreen/orange/red pattern)no WLAN Fast WLAN Slow Slow Red +Fast Green(results in agreen/orange/red pattern)Installation of the 9764 MCO Wi-Fi AP LED state description - external Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction C-15PRELIMINARYPRELIMINARY
Installation of the 9764 MCO Wi-Fi AP LED state description - external Wi-Fi AP module........................................................................................................................................................................................................................................................................................................................................................................................................................................................................C-16 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Appendix D: Productconformance statementsOverviewPurposeThis section presents the product conformance statements that apply to the Alcatel-LucentMetro Cell Outdoor Access Point equipment when deployed in the United States.The statements that are required are determined primarily by national or multi-nationalregulations. However, in some regions, contract terms determine which statements arerequired.The presence of the statement indicates that the product does comply with that statementwherever it is required to do so.ContentsFederal Communications Commission D-2Product safety conformance statements D-4Antenna exposure statements D-5FDA/IEC optical transmitter product compliance statements D-7Eco-environmental statements D-8...................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction D-1PRELIMINARYPRELIMINARY
Federal Communications CommissionFederal Communications CommissionImportant! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.FCC Part 15 Class BNote: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna•Increase the separation between the equipment and receiver•Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected•Consult the dealer or an experienced radio/TV technician for help.FCC Part 68This equipment complies with Part 68 of the FCC rules and the requirements adopted bythe ACTA. At the upper-right-hand corner inside the cabinet assembly of this equipmentis a label that contains, among other information, a product identifier in the format ofAAAEQ##TXXXX. If requested, this number must be provided to the telephonecompany.FIC 04DU9-1SN.Product conformance statements Federal Communications Commission........................................................................................................................................................................................................................................................................................................................................................................................................................................................................D-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
SOC 6.0NThe T1 network interface on this equipment is hardwired to a punchdown block, whichmeets the FCC specifications.If this equipment causes harm to the telephone network, the telephone company willnotify you in advance that temporary discontinuance of service may be required.However, if advance notice is not practical, the telephone company will notify thecustomer as soon as possible. Also, you will be advised of your right to file a complaintwith the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations, orprocedures that could affect the operation of the equipment. If this happens, the telephonecompany will provide advance notice in order for you to make necessary modifications tomaintain uninterrupted service.FCC regulations prohibit the connection of customer-provided equipment to central officeimplemented systems. Connection to party lines is subject to tariffs; users should contacttheir state public utility commission, public service commission, or corporationcommission for information.If the equipment is causing harm to the telephone network, the telephone company mayrequest that you disconnect the equipment until the problem is resolved.If trouble is experienced with this equipment repair or warranty information may beobtained by contacting:Technical Support Services, within the United States: +1 630 224 4762, prompt 2RF approvalThis equipment complies with Part 2, Subpart J - Equipment Authorization Procedures, ofthe FCC Rules.This device complies with Part 22 – Public Mobile Services, Subpart H – CellularRadiotelephone Services.This equipment complies with Part 24 - Personal Communications Services, Subpart E -Broadband PCS.Product conformance statements Federal Communications Commission........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction D-3PRELIMINARYPRELIMINARY
Product safety conformance statementsProduct safety conformanceThe Alcatel-Lucent 9764 Compact Metro Cell Outdoor B41 2x6W is Safety Certified ITEby CSA International.This Certification is marked on the equipment main nameplate label. Should the localAuthority Having Jurisdiction (AHJ) require prior or additional verification of thisCertification, a Product Certificate of Compliance can be obtained from the specificCertification Body by the Business/Product Unit Applicant for the product or bycontacting:Technical Support Services, within the United States: +1 630 224 4762, prompt 2Any modifications to this equipment are not permitted without review and official writtenauthorization from the specific Certification Body. Unauthorized changes may violate theProduct Safety Certification. Modifications or changes authorized by official CN/CNNare assumed to have received prior approval from this Lab.Indoor applicationsThis equipment is intended for installation in restricted access locations where access iscontrolled or where access can only be gained by service personnel with a key or tool.Access to this equipment is restricted to qualified service personnel only.Product conformance statements Product safety conformance statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................D-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Antenna exposure statementsAntenna exposureAntenna installations for this equipment shall be performed in accordance with allapplicable manufacturer's recommendations, and national laws and regulations. To ensurecorrect antenna installation, the antenna installer shall perform all necessary calculationsand/or field measurements to evaluate compliance with applicable national laws orregulations regarding exposure to electromagnetic fields. The supplier of radioequipment, the supplier of antenna equipment and the integrator and builder of the sitemust provide sufficient information so that the limits of the exclusion zones can bedetermined. Any changes to the antenna or other equipment in the transmit path mayrequire re-evaluation of the exposures to electromagnetic fields.Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, allinstallations must be evaluated for requirements contained in Table 1, “Limits formaximum permissible exposure,” in section 1.1310.Guidelines for antenna placements1. Antennas should be placed more than 20 cm (8 inches) away from possible human RFexposure.2. When placing the antennas, please be aware of FCC 47 CFR 1.1307 - 1.1310 andFCC guidelines for public safety, for example, OET Bulletin No. 56, “Questions andAnswers About the Biological Effects and Potential Hazards of Radio frequencyElectromagnetic Fields” and OET Bulletin 65, “Evaluating Compliance With FCCGuidelines for Human Exposure to Radiofrequency Electromagnetic Fields”). FCCrequirements mandate maximum power density at location of possible exposure to bebelow 0.5 mW/cm2(5 W/m2) at 750 MHz and 1 mW/cm2(10 W/m2) at AWS forgeneral population/uncontrolled exposure and 2.5 mW/cm2(25 W/m2) at 750 MHzand 5 mW/cm2(50 W/m2) at AWS for occupational/controlled exposure. Exposure isaveraged over a 30 minute time period for general population and over a 6 minutetime period for occupational/controlled exposure.Example of a B13 MCO running at 5 W (7 dBW), connected viaa2dBcable loss anda 3 dBi antenna:Power density at distance R from antenna is PwD = EIRP(dBW) - 10*log10(4pi*R2)At 1 m away from the antenna, PwD(1m) = EIRP(7dBw - 2dB + 3dBi) - 11dB =-3dBw/m2(0.5W/m2)At 1 ft away from the antenna, PwD(0.305m) = EIRP(8dBW)-0.82dB = 7.18dBW/m2(5.2W/m2)Note: Losses of all components between the MCO port and antenna should beincluded in EIRP calculations. MCO power in indoor applications may have to belowered based on antenna distance to human exposure and total EIRP.Product conformance statements Antenna exposure statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction D-5PRELIMINARYPRELIMINARY
This example indicates that in this particular deployment configuration, US safety limitsfor general population are met at a distance slightly over 1 foot for B13 operation.Product conformance statements Antenna exposure statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................D-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
FDA/IEC optical transmitter product compliance statementsFDA/IEC optical transmitter product complianceAlcatel-Lucent declares that this equipment complies with the Food and DrugAdministration’s Center for Devices and Radiological Health (FDA/CDRH) regulations21 CFR 1040.10 and 1040.11. It is a Class I/1 laser optical fiber communication systems“product” under the FDA.This Product is designed to ensure that personnel operating the product are notendangered by laser radiation during normal operation and fault conditions. This productdoes not present a risk of eye injury because it is fully enclosed and does not containembedded lasers greater than Class I/1 unless otherwise noted.Laser warningWARNINGLaser hazardThe light from laser and high-radiance LED's may cause eye damage if absorbed by theretina.•Use of controls or adjustments or performance of procedures other than thosespecified herein may result in hazardous laser radiation exposure.•Do not view directly into the laser beam with optical instruments such as a fibermicroscope because viewing of laser emission in excess of Class 1 limits significantlyincreases the risk of eye damage.•Never look into the end of an exposed fiber or an open connector as long as theoptical source is switched on.•Ensure that the optical source is switched off before disconnecting optical fiberconnectors.Product conformance statements FDA/IEC optical transmitter product compliance statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction D-7PRELIMINARYPRELIMINARY
Eco-environmental statementsPackaging collection and recovery requirementsCountries, states, localities, or other jurisdictions may require that systems be establishedfor the return and/or collection of packaging waste from the consumer, or other end user,or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for thereturn and/or collection of the packaging waste may be established.For more information regarding collection and recovery of packaging and packagingwaste within specific jurisdictions, contact the Alcatel-Lucent Environment, Health andSafety organization or Alcatel-Lucent Hazardous Waste Center technical support at (888)539-2783.For installations not performed by Alcatel-Lucent, please contact the Alcatel-LucentCustomer Support Center at:Technical Support Services, within the United States: +1 630 224 4762, prompt 2Material content complianceThe following notification applies to Alcatel-Lucent products distributed for sale, resale,or use.This product, part, or both may include a lithium-manganese dioxide battery, whichcontains very small amounts of a perchlorate substance. Special handling may apply.For California:Perchlorate Material - special handling may apply.See http:\\www.dtsc.ca.gov/hazardouswaste/perchlorate/.Product conformance statements Eco-environmental statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................D-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Glossary...................................................................................................................................................................................................................................Numerics3GThird Generation3GPP3rd Generation Partnership Project...................................................................................................................................................................................................................................A A (Ampere)Base SI unit of electrical current.A-GPSAssisted Global Positioning SystemAC (Alternating Current)Continuously variable current, rising to a maximum in one direction, falling to zero, thenreversing direction and repeating the cycle in the other direction.AC convenience outletSites must be equipped with at least two duplex outlets for installation and maintenanceprocedures. The outlets are required to power test equipment and installation tools.ACF (AC Fail)The AC Fail (ACF) alarm indicates that AC input to one or more rectifiers in the power plant isabsent or outside of the operating range of the equipmentAmbient temperatureThe temperature of air or other media in a designated area, particularly the areaANRAutomatic Neighbor RelationANSI (American National Standards Institute)An organization chartered to accredit standards developed by a wide variety of industry groups,without influence from any one company or organization. Does not develop standards, butreviews and implements those developed by other organizations. ANSI is a member of theInternational Standards Organization (ISO).....................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction GL-1PRELIMINARYPRELIMINARY
AntennaAn elevated device for radiating or receiving radio waves. It changes electrical currents intoelectromagnetic waves, and vice versa.AP (Application Processor)Network element located at the MSC which provides the radio control logic for managing calls.The AP is a general purpose computer that can host a number of RCS virtual machines.AWG (American Wire Gauge)American standard for classifying wire diameter....................................................................................................................................................................................................................................B BackupFacility used to replace an element which has failed.Base stationThe equipment that provides the air interface that allows mobile terminals to communicate withthe telecommunications network.BondingPermanent connection of metallic parts to form an electrically conductive path that will assureelectrical continuity and have the capability to safely conduct any current likely to be imposed.Branch circuitThe circuit conductors between the final overcurrent device protecting the circuit and theoutlet(s).Breaker, circuitA cut-out device which breaks a circuit when preset limits of current are exceeded.Buried cableA communication cable manufactured or produced for the purpose of burial in direct contact withthe earth.Buried ring groundA buried, bare, tinned, solid copper cable encircling the site building and/or tower foundation.Bus barOne or more conductors that serves as a common connection for a group of related devices.Busy hourThe uninterrupted period of 60 minutes for which the average intensity of traffic is at maximum....................................................................................................................................................................................................................................C Cable runReferring to cable routing.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Cable sweep(See Sweep)CDRHCenter for Devices and Radiological HealthCEConformité EuropéeneA CE Marking on a product is a manufacturer's declaration that the product complies with theessential requirements of the relevant European health, safety and environmental protectionlegislation.Cell siteAn installation located within a cell that houses the equipment needed to set up and complete callson a cellular telephone.CFRCode of Federal RegulationsCircuit1. The complete path between two terminals over which one-way or two-way communicationsmay be provided. 2. An electronic path between two or more points, capable of providing anumber of channels. 3. A number of conductors connected together for the purpose of carrying anelectrical current. 4. An electronic closed-loop path among two or more points used for signaltransfer. 5. A number of electrical components, such as resistors, inductances, capacitors,transistors, and power sources connected together in one or more closed loops.CMASCommercial Mobile Alert SystemCMSCertificate Management SystemCoaxial cableA cable with one or more coaxial pairs under one outer sheath. The cable consists of a centerconductor surrounded by an insulating material and a concentric outer conductor.ConfigurationAn arrangement of functional units according to their nature, number, and chief characteristics.Controlled environmentAn indoor location in which temperature, humidity, and ventilation are maintained at specificlevels.CPRICommon Public Radio InterfaceCSA (Canadian Standards Association)Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction GL-3PRELIMINARYPRELIMINARY
An independent, non-government, not-for-profit association for the development, by consensus,of Canadian standards and product certifications.CSC (Cell Site Configuration)Sheets provided in this document for documenting cell site configuration, conditions, and otherpertinent information for reference during product deployment, and future additions....................................................................................................................................................................................................................................D d2Udigital 2U-height box.dBi (decibels (dB) relative to isotropic)Decibels relative to an isotropic antenna gain at radio frequencies.Antenna gain is usually defined as the ratio of the power produced by the antenna from a far-fieldsource on the antenna's beam axis to the power produced by a hypothetical lossless isotropicantenna, which is equally sensitive to signals from all directions. Usually this ratio is expressed indecibels, and these units are referred to as "decibels-isotropic" (dBi).DC (Direct Current)Current flow in one direction.DHCPDynamic Host Configuration ProtocolDiversityA method of radio transmission and/or reception, which counteracts the effects of fading bycombining several signals all bearing the same information.DLdownlinkDNSDomain Name SystemDoSdenial of serviceDown conductorA vertical conductor of low impedance that connects the cell site grounding electrode system tothe grounding electrode system.Driven ground rodA copper-clad steel or stainless steel rod, a minimum of 2.4 meters (8 feet) long and 5/8 inch indiameter.DRXdiscontinuous receptionGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-4 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
...................................................................................................................................................................................................................................EE1A four-wire voice and data trunking facility that carries 30 duplex channels in 64-kbps time slices.E1 facilities are commonly used in countries outside of North America.Earthquake zoneSeismic ratings ranging from zone 1 (relatively low central office operational shock and vibrationlevels) to the most severe zone 4 levels. Equipment must be able to withstand earthquake zonerequirements under both operational and non-operational conditions.ECIDenhanced cell IDEIRPeffective isotropic radiated powerElectrolytic ground electrode (rods)A low resistance grounding rod (pipe) using low resistivity materials.EMSElement Management SystemESDElectrostatic DischargeEUEuropean UnionExothermic weldA method of making electrical connections of copper to copper or copper to steel using hightemperature fusion. The molten copper flows over conductors in a mold, melting and weldingthem together....................................................................................................................................................................................................................................F FA (Fuse Alarm)The fuse alarm (FA) indicates that the power system battery and load protection fuse opens.FacilityAny element of physical telephone equipment needed to provide service, such as cables,switching systems, and microwave radio transmission systems.FCC (Federal Communications Commission)A group founded in 1934 to regulate all types of communications in the United States.FloatTo operate a power load on a main-driven rectifier in parallel with a low impedance storagebattery, which is kept fully charged by the rectifier and is itself only called upon to provide powerGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction GL-5PRELIMINARYPRELIMINARY
during temporary and short-duration peaks for which the rectifier output is insufficient.FQDNfully qualified domain nameFrequencyFor a periodic wave, such as alternating current, the number of complete cycles per unit of time.The unit of frequency is cycles per second, or hertz.FRUfield replaceable unitFuseAn overcurrent protective device that has as its critical component a metal wire or strip that willmelt when heated by a prescribed (design) amperage, creating an open in the circuit of which it isa part, thereby protecting the circuit from an overcurrent condition....................................................................................................................................................................................................................................GGAgeneral availabilityGainThe ratio of output current, voltage, or power to input current, voltage, or power, respectively.Gain is usually expressed in dB. If the ratio is less than unity, the gain, expressed in dB, will benegative, in which case there is a loss between input and output.Garmin 45XLSA handheld GPS receiver that can be used to verify GPS reception at a cell site. It has a removableantenna and provides +5 VDC on the center pin of the RF connection to power external activeantennas. If poor GPS reception is suspected, the Garmin 45XLS can be used to verify that theGPS antenna and cable system is working acceptably. It will also verify that the GPS antennalocation is acceptable.GE (Gig-E)gigabit ethernetGFCI (Ground Fault Circuit Interrupter)A device intended for protection of personnel that functions to de-energize a circuit or portionthereof within an established period of time when a current to ground exceeds somepredetermined value that is less than that required to operate the overcurrent protective device ofthe supply circuit.GPONGigabit Passive Optical NetworkGPS (Global Positioning System)A system of 24 satellites that provides, among other things, extremely accurate timing informationto the cell sites.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-6 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
GroundA conducting connection between equipment or an electrical circuit and earth, or conductive bodythat is used in place of earth.Grounding conductorA conductor used to connect equipment or a grounded electrical circuit to the grounding electrodesystem.Grounding electrode systemThe conductive objects that are intentionally bonded to furnish connection to earth (i.e., buriedring ground with ground rods, electrically continuous buried metallic water pipe, electrolyticground electrode, etc.).GUIgraphical user interfaceGuySteel wire or rope used to hold a pole upright....................................................................................................................................................................................................................................H HandoffA automatic transfer of a cellular telephone call from one cell to another, maintaining call qualityas the mobile user moves through the coverage area.Heat dissipationThe heat generated by cabinets during operation.HPBWhalf-power beamwidthHTTPHypertext Transfer ProtocolHVAC (Heating, Ventilation, Air Conditioning)Hz (hertz)A unit of frequency of a periodic process equal to one cycle per second....................................................................................................................................................................................................................................I IEEEInstitute of Electrical and Electronics EngineersIndoor siteInstallation site in a controlled environment, allowing the use of indoor cabinets.INTR (Intrusion Alarm)The Intrusion (INTR) alarm indicates a door or access panel to the power system is open.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction GL-7PRELIMINARYPRELIMINARY
IPinternet protocolIPsecinternet protocol securityIRCinterference rejection combining...................................................................................................................................................................................................................................L LEDlight emitting diodeLoadThe power consumed by a device or circuit in performing its function.LossThe diminution, usually expressed in dB, of signal level in a communications medium. Thepower, usually expressed in watts, consumed by a circuit or component. The energy dissipatedwithout accomplishing useful work or purpose.LTELong Term Evolution...................................................................................................................................................................................................................................M MAC (address)media access control addressA MAC address is a hardware identification number that uniquely identifies each device on anetwork.MAC (protocol)Medium Access Control ProtocolThe media access control (MAC) data communication protocol is a sublayer of the data link layer.MAC protocol provides addressing and channel access control mechanisms that make it possiblefor several terminals or network nodes to communicate within a multiple access network thatincorporates a shared medium, e.g. Ethernet.MCIMetro Cell IndoorMFBImultiple frequency band indicatorsMGB (Main Ground Bus)A copper bus bar used to provide the electrical interfaces for connection of the isolated groundplane to the integrated ground system.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-8 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
MHz (Megahertz)Reference of radio frequency spectrum of one-million cycles.MIMOmultiple input, multiple outputAn antenna technology for wireless communications in which multiple antennas are used at boththe source (transmitter) and the destination (receiver).MOP (Method of Procedure)Cell site walk-through where site preparation activities are verified prior to installing the 9412eNodeB Compact equipment.MSC (Mobile Switching Center)In an automatic cellular mobile system, the interface between the radio system and the publicswitched telephone network. The MSC performs all signaling functions that are necessary toestablish calls to and from mobile stations.MSPmobile service providermWmilliWatt...................................................................................................................................................................................................................................N NEC (National Electric Code)Standard that governs the use of electric wire, cable, and fixtures, and electrical and opticalcommunication cable installed in buildings.NetworkA set of terminals, the communications link that joins them, and the protocols that allow them tofunction together and communicate with each other.NFPA (National Fire Protection Association)Standards and code writing organization made up of volunteer industrial and institutionalsubject-matter-expert committees.NIU (Network Interface Unit)A device that performs interface functions, such as code conversion, protocol conversion, andbuffering, required for communications to and from a network. The device is used primarilywithin a local area network to allow a number of independent devices, with varying protocols, tocommunicate with each other. An NIU converts each device protocol into a common transmissionprotocol. The transmission protocol may be chosen to accommodate directly a number of thedevices used within the network without the need for protocol conversion for those devices by theNIU.NominalSpecified value or intended value independent to any uncertainty in its realization. In a device thatrealizes a physical quantity, it is the value of such a quantity specified by the manufacturer.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction GL-9PRELIMINARYPRELIMINARY
Non-Alcatel-Lucent power3rd party power systems, or power systems other than Alcatel-Lucent....................................................................................................................................................................................................................................O OA&Moperations, administration, and maintenanceOLCSOnline Customer SupportOOTout of time alignmentOSPOutside PlantOSSOperation Support SystemOTDOAobserved time difference of arrival...................................................................................................................................................................................................................................P Pair cableCable made up of one or more separately insulated wire pairs, none of which is arranged withanother quads.PCIphysical cell IDPDUPower Distribution UnitPhaseThe number of separate voltage waves in commercial alternating current, designated as "singlephase", "three phase", etc.PigtailA short length of electrical conductor permanently affixed to a component, used to connect thecomponent to another.PMJConditions that impacts service of the power system and/or requires immediate attention areclassified as major alarms and designated as Power Major (PMJ) alarms.Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-10 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
PMNConditions requiring service, but having no immediate impact on the power system output areclassified as minor alarms and designated as Power Minor (PMN) alarms.PnPplug and playPVC (Polyvinyl Chloride)A thermoplastic made of polymers, which is tough, nonflammable, and water resistant and is usedas an insulation....................................................................................................................................................................................................................................Q QoEQuality Of ExperienceQoSquality of service...................................................................................................................................................................................................................................R RANRadio Access NetworkReceive-onlyPertaining to a device or a mode of operation capable of receiving messages, but not transmittingmessages.RF (Radio Frequency)Electromagnetic wave used for, among other things, cellular voice and data communications.RMS (Root Mean Square)Effective value of an alternative wave. For AC, this is numerically equal to DC value of thecurrent with the same heating effect.RoHSRestriction of Hazardous SubstancesRx (RX)Receive...................................................................................................................................................................................................................................S SectorThe coverage area within the degree of directionality of the antennas.SeGWSecurity GatewayGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction GL-11PRELIMINARYPRELIMINARY
Service providerCustomer who purchases switching and Site equipment from system vendors, which, in turn, isprovided to end-user subscribers through resellers and distribution channels.SFP (Small Form-Factor Pluggable)A compact, hot-pluggable transceiver that interfaces a network device motherboard to afiber-optic or copper networking cable to support telecommunication and data communications.ShieldA housing, screen, sheath, or cover that substantially reduces the coupling of electric, magnetic, orelectromagnetic fields into or out of circuits or transmission lines.Short-termNo more than 96 consecutive hours or 15 days per year.Single-phaseA circuit in which there is only one sinusoidal voltage variation.SiteAn installation that houses the equipment needed to set up and complete calls on a cellulartelephone.Site preparationTo perform the requirements necessary at the site before installation can begin.SONSelf-Organizing NetworkStrandedWires twisted together to form a strong flexible cable.Surge protectorProtective device used to limit surge voltages by discharging or bypassing any unwanted surgecurrent that may enter a building or equipment.SweepTo vary the frequency of a signal over a whole band as a means of checking the response ofequipment under test....................................................................................................................................................................................................................................TT1A four-wire voice and data trunking facility that carries 24 duplex channels over 56-kbps timeslots.THHN (Thermoplastic high-heat resistant nylon-coated)Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-12 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
Three-phaseAn alternating current supply with three sinusoidal voltages differing in phase by 120°.THWN (Thermoplastic heat and water resistant nylon-coated)TRDU (Transmit Receive Duplex Unit)Twisted pair cableCable made up of one or more separately insulated twisted-wire pairs, none of which is arrangedwith another to form quads.Tx (TX)TransmitTYP (Typical)...................................................................................................................................................................................................................................U UBCUniform Building CodeULuplinkUL® (Underwriters Laboratories)Laboratories that test and approve materials and equipment against predetermined performancestandards.UV (Ultraviolet)The portion of the electromagnetic spectrum in which the longest wavelength is just below thevisible spectrum, extending from approximately 4 nm to approximately 400 nm. Some authoritiesplace the lower limit of uv at values between 1 and 40 nm, 1 nm being the upper wavelength limitof x-rays. The 400-nm limit is the lowest visible wavelength, i.e., the highest visible frequency,violet....................................................................................................................................................................................................................................V V (Volt)The derived SI unit of electrical potential difference. It is the difference in potential between twopoints of a conducting wire carrying a constant current of 1 ampere when the power dissipatedbetween these two points is equal to 1 watt.Vac (Volts Alternating Current)VDC (Volts Direct Current)VoLTEVoice over LTEGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction GL-13PRELIMINARYPRELIMINARY
VPNVirtual Private NetworkVrms (Volts Root Mean Square)VSWR (Voltage Standing Wave Ratio)In a transmission line, the ratio of maximum to minimum voltage in a standing wave pattern. TheVSWR is a measure of impedance mismatch between the transmission line and its load. Thehigher the VSWR, the greater the mismatch. The minimum VSWR, i.e., that which corresponds toa perfect impedance match, is unity....................................................................................................................................................................................................................................W W (watts)The derived SI unit of power. It is equivalent to 1 joule per second, or 1 volt-ampere.Walk-throughA critical examination of a design or product undertaken to ensure that it is of adequate quality.WaveformThe characteristic shape of a periodic wave, determined by the frequencies present and theiramplitudes and relative phases.WCDMAWideband Code Division Multiple AccessWEEEWaste Electrical and Electronic EquipmentWMM (9471 WMM)The Alcatel-Lucent 9471 Wireless Mobility Manager (WMM) is the Serving GPRS Support Nodeand Mobility Management Entity (SGSN/MME) in the converged wireless packet core network. Itperforms mobility and session management signaling and packet data switching for GSM,WCDMA and LTE access networks.WPSWireless Provisioning SystemGlossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-14 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY
IndexNumerics9764 CMCOgrounding, 5-2Standard pole mount, 4-19.............................................................Aabout this documentdocument support, xvglossary, GL-1how to order, xvtechnical support, xvadditional optional itemsWi-Fi AP, C-9AntennaGPS/GLONASS antenna, 2-9RF antenna, 2-9AWG conversion table, xiii.............................................................BBackhaul, 2-8Basic site requirementsInstallation clearances, 3-4.............................................................Ccabling, 5-12CablingEthernet, 4-3,4-6,4-9,4-11cablingground, 5-2CablingRF antenna (external), 5-4SFP transceiver module, 4-3,4-9Connect electrical Ethernet cable,4-6,4-11Connect GPS antenna, 5-8Connect optical Ethernet cable,4-6,4-11ConnectorsMetro Radio Module, 2-6Conventions used, xii.............................................................DDaisy chaining, 4-3,4-3,4-6,4-9,4-9,4-11configuration options, 3-9Device placement, 3-2Dimensions and weights, 2-11document support contactinformation, xv.............................................................FFinal installation activities andchecks, 6-2.............................................................Gglossary, GL-1grounding9764 CMCO, 5-2.............................................................HHardware and ancillary items9764 CMCO base items, 2-149764 MCO Wi-Fi AP, 2-14Backhaul modules, 2-16Electrical Ethernet cable –Specifications, 2-18Ethernet cable (electrical),2-17Ethernet cable (optical), 2-18External antenna - GPS, 2-17Grounding, 2-16Installation kits, 2-15Power, 2-15RF antenna, 2-16SFP modules, 2-16Solar shield, 2-19Surge arrestor, 2-17how to order documents, xv.............................................................IInstallation kitsfor pole mount, 3-5for wall mount, 3-7Installation materials, 3-2....................................................................................................................................................................................................................................9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction IN-1PRELIMINARYPRELIMINARY
Intended audience, xi.............................................................LLED state description, B-1LED statusexternal Wi-Fi AP module,C-13.............................................................MMain characteristics, 2-2MCOStandard wall mount, 4-33Metro Cell Modulestatus indicators, 2-10Metro Cell OutdoorBackhaul, 2-8GPS antenna, 2-9product labelling, 2-10RF antenna, 2-9Metro Dock cablingmount the surge arrestor, 4-15Metro Dock Indoortools, 3-3Metro Radio Moduleconnectors, 2-6Metro Radio Outdoorphysical description, 2-4power supply, 2-8.............................................................PPhysical descriptionexternal 9764 MCO Wi-Fi APmodule, C-2Metro Radio Outdoor, 2-4Physical description (externalWi-Fi AP module)Antennas, C-7Connection interfaces, C-5Product base items andconfigurations, C-5Product labeling, C-7Product overview, C-2Status indicators, C-7Pole mountinstallation kits, 3-5options, 3-5Power cord, connect, 5-13,5-14Power supplyMetro Radio Outdoor, 2-8Pre-installation, 3-2pre-installationWi-Fi AP, C-9Product capabilities, 2-2product conformance statements,D-1Product delivery contents, 3-2product delivery contentsWi-Fi AP, C-9product labeling, C-7product labelling, 2-10.............................................................RReason for revision, xiRelated documentationAlcatel-Lucent, xivthird party, xivRelated training, xiv.............................................................Ssafety information, xvSFP transceiver module, 4-3,4-9Standard pole mount, 4-19Standard wall mount, 4-33status indicators, 2-10Supported installation optionsDaisy chain, 2-13Standard, 2-12Street furniture, 2-14Systems supported, xiv.............................................................Ttechnical support contactinformation, xvTools, 3-3toolsWi-Fi AP, C-9.............................................................WWall mount, 4-38examples, 3-8installation kits, 3-7options, 3-7Weights and dimensions, 2-11Wi-Fi AP, C-1additional optional items, C-9attach to MCO, C-10installation, C-10pre-installation, C-9product delivery contents, C-9tools, C-9Wire cross-sectional area table,xiiiWire size table, xiiiwith optional tilt brackets, 4-38Index........................................................................................................................................................................................................................................................................................................................................................................................................................................................................IN-2 Alcatel-Lucent – InternalProprietary – Use pursuant to Company instruction9764 CMCO B41 2x6W3MN-02026-0002-RJZZAIssue 0.01 April 2015PRELIMINARYPRELIMINARY

Navigation menu