Airspan Communications 265AS Airsynergy Compact Outdoor Pico Base Station User Manual 01

Airspan Communications Limited Airsynergy Compact Outdoor Pico Base Station 01

Contents

User Manual 01

Additional Airsynergy User Manual StatementsAirsynergy basestation, FCC ID: O2J-265AS, operating in the 2572-2614 MHz band.Federal Communications Rules for operation in USAThe correct setting of the following Base Station parameters in Netspan, are critical to the correct operation of equipment in compliance with the rules detailed in 47CFR27subpart C:Transmit PowerTransmit FrequencyChannel BandwidthAny attempt to alter these parameters outside those permitted by the Netspan software or the operator license could be a violation of that licenseTransmit Power / Tune-upTransmit power is set using the Netspan management software during install /commissioning.The unit may transmit with a power of up to 30dBm at each antenna port when connected to cross polarised antenna with maximum gain of 18dBi.FCC and Industry Canada RF Exposure RequirementsFCC Maximum Permissible Exposure (MPE) limits for equipment operating in the frequency range 1500 – 100,000 MHz is 1.0 mW/cm2.Following installation and commissioning, the safe distance from the antenna is the greater of:20cmOrr cm, where r = √ (PG/4πS)P: power input to antenna(s) in mW G: numeric gain of antenna relative to isotropic radiatorS: power density in mW/cm2 = 1 mW/cm2The device has two antenna ports, so safe distance from the antenna shall be the greater of:20 cm or √ (2*PG/4πS)Which gives20 cm or √ (0.16*P*G) cm.

Navigation menu