Airgo Networks AGN1022PC0100 802.11 b/g 2x2 MIMO Cardbus Card User Manual Installation and User Guide

Airgo Networks Inc. 802.11 b/g 2x2 MIMO Cardbus Card Installation and User Guide

UserManual.wiki >

Airgo Networks >

AGN1022PC0100 User Manual

User Manual

Installation and User Guide Wireless LAN Client Adapter Installation and User Guide: Wireless LAN Client Published July2005

Copyright © 2004, 2005 by Airgo Networks. All Rights Reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of unless such copying is expressly permitted by U.S. copyright law. Page 2 of 36 Installation and User Guide: Wireless LAN Client

_ NMS Pro Installation and Configuration Guide — Explains how to install and use the enterprise network management application. _ Access Point Command Line Interface (CLI) Reference Manual — Provides a listing of all the commands available for the Access Point, usable through console access and command line interface; this manual is intended for advanced users and system administrators. Installation and User Guide: Wireless LAN Client Page 5 of 36

Overview The Wireless LAN Client Adapter provides the communication link between your laptop and other devices in a wireless network. The adapter operates in the 2.4 GHz radio frequency band and can communicate with any device that meets the compatible IEEE 802.11 standards. When used with Access Points as part of a wireless network installation, the Wireless LAN Client Adapter offers the following special features: o Extended range o Multi mode operation o Interference handling The Client Utility, shipped with each Wireless LAN Client Adapter, includes tools for setting the basic configuration. Device Types The Wireless LAN Client Adapter is currently offered in two device types: • PC Card — Extended Type II PCMCIA CardBus (32-bit interface) for use in laptop and notebook computers. • Mini-PCI— Mini-PCI adapter for use in laptop computer mini-PCI expansion slots. Mini-PCI adapters are installed by factory personnel when the PC system is configured by the PC manufacturer. For mini-PCI adapter information, consult your PC manufactures’s documentation. Shipping Package Contents The Wireless LAN Client Adapter shipping package contains the following items: • Wireless LAN Client Adapter • CD containing the device driver and Client Utility System Requirements Your PC must meet the following minimum requirements: • Windows XP or Windows 2000 • 128 MB memory • CPU 750 MHz or greater • At least 10 MB disk capacity available for the driver and Client Utility software. • Type II or Type III CardBus slot for notebooks and laptops Inserting and Removing the Wireless LAN Client Adapter To insert the PC card: 1 With the computer powered on or off, slide the PC card firmly into an available CardBus slot Page 6 of 36 Installation and User Guide: Wireless LAN Client

(Figure 1). Figure 1: PC Card Installation To safely remove the PC card while the computer is powered up: 2 Right-click the system tray icon entitled Safely Remove Hardware or Eject or Stop Hardware. The system prompts you to select the device to stop. 3 Select Wireless LAN NIC, and click Stop. 4 Click OK when asked to confirm. 5 Press the CardBus eject button on the side of your computer to release the slot locking mechanism and slide the PC card out. Checking Adapter Activity The LEDs on the PC card indicate the state of current communications. LED 1 is on the left and LED 2 is on the right when the card is facing up (thick section on top, metallic contact on the bottom): • LED 1 — Shows solid green when the adapter is associated (connected) to the network. • LED 2 — Blinks green when the adapter is associated to the network and transmitting or receiving data. The blinking speed reflects the level of network activity. Installing the Wireless LAN Client Adapter Driver and Client Utility Follow the steps in this section to install the software needed to support your Wireless LAN Client Adapter. The software includes: • Wireless LAN Client Adapter driver • Client Utility Installation Steps 1 Power up your computer. 2 Insert the Wireless LAN Client Adapter distribution CD, which should automatically start the Installation Wizard. If the wizard does not start automatically, open the CD and double-click Setup.msi. The Installation Wizard opens. Installation and User Guide: Wireless LAN Client Page 7 of 36

3 Click Install the software. The Installation Welcome screen opens. 4 Click Next. The License agreement window opens. Page 8 of 36 Installation and User Guide: Wireless LAN Client

5 Review the license agreement, and then choose I accept the terms in the license agreement. 6 Click Next. 7 Enter a user name and organization name, and indicate whether access to the Client Utility will be permitted for all users or just the specified user. 8 Click Next. 9 Accept Complete as the setup type. Installation and User Guide: Wireless LAN Client Page 9 of 36

NOTE: If you select Complete, the software is automatically installed in the default location. To choose another location, select the Custom option (“Custom Installation”). 10 Click Next. 11 Click Install to begin installation. To review previous selections, click Back. The wizard completes the installation of the driver and the Client Utility and presents the completion window. Page 10 of 36 Installation and User Guide: Wireless LAN Client

Select Use Windows to manage my wireless network settings if you want to use Wireless Zero Config (WZC) to manage the Client Adapter. NOTE: It is necessary to use WZC if you want to configure Wi-Fi Protected Access (WPA) security. For information about security, see Chapter 3, “Configuration.” For instructions on enabling or disabling WZC, see Appendix A, “Using the Client Utility With Windows XP.” You can change the WZC option at a later time, from the Client Utility main window, as explained in “Working with Profiles”. 13 Click Finish to complete the software installation. 14 Now, insert the Wireless LAN Client Adapter. The Found New Hardware Wizard opens. 15 If your system has Windows XP Service Pack 2, a welcome window opens. Select No, not at Installation and User Guide: Wireless LAN Client Page 11 of 36

The installation is now complete. Examine the LEDs to confirm that the Client Adapter is installed and working properly. See “Inserting and Removing the Wireless LAN Client Adapter” Custom Installation Follow these steps if you want to change the default software installation location. 1 In the Customer Information window, select Custom, and click Next. 2 Click Change to select a new location. Installation and User Guide: Wireless LAN Client Page 13 of 36

3 Enter the path for the new location, or click Browse to select a path. 4 Click OK. Uninstalling the Client Utility and Drivers Uninstall the Client Utility if you are upgrading to a newer version of the utility. To do so, use the Windows Add or Remove Programs utility. To access Add or Remove Programs: 1 Choose Start > Control Panel > Add or Remove Programs. 2 Select the Client Utility program, and click Remove. 3 Confirm that you want to remove the program, and following the wizard instructions. Page 14 of 36 Installation and User Guide: Wireless LAN Client

Navigating the User Interface This section explains how to use the Client Utility interface. Top Display The top display section lists characteristics of the current network connection: Item Description Status Indicates whether the Client Adapter is currently associated to a working AP. Network If Status is Connected, lists the name of the network to which the Client Adapter is connected. AP Name If Status is Connected, lists the name of the AP to which the Client Adapter is connected. Channel (Mode) If Status is Connected, lists the radio channel used and the 802.11 mode (b or g). Windows Configuration Checkbox A checkbox entitled Use Windows to configure my wireless networks is located just below the top display section. Select this checkbox to use Wireless Zero Config (WZC) to configure the Client Adapter. WZC is required to use Wi-Fi Protected Access (WPA) as the security mode when connecting to the network. For more information on security, see. If you use WZC to configure the Client Adapter, you can still use the Client Utility to monitor available networks and check connection status. Available Networks List The Available Networks section of the Client Utility window lists all the working networks within radio range of your Client Adapter. The following information is presented: Icon Column Description SSID Name of the network, associated SSID Name of the network, not associated Signal quality Signal strength, as a percentage: Four solid green bars, 60% or greater Signal quality Signal strength, as a percentage: Three solid green bars, one hollow green: 40-60% Signal quality Signal strength, as a percentage: Two solid yellow, two hollow yellow bars, 20-40% Signal quality Signal strength, as a percentage: One solid yellow bar, three hollow yellow bars, 5-20% Installation and User Guide: Wireless LAN Client Page 17 of 36

area of the window, an SSID signal indicator shows the overall strength of all APs that are configured for that SSID. Installation and User Guide: Wireless LAN Client Page 21 of 36

Field Description SSID Service Set Identifier (SSID) is a name that uniquely identifies a wireless local area network. Each device in the wireless network must have the same SSID configured in order to participate in the network. BSSID Basic Service Set (BSS) is the collection of wireless devices operating with an individual access point in infrastructure mode or without an access point in ad-hoc mode. For further information on service set identifiers. Network Type The Network Type indicates the type of network arrangement. Infrastructure -- Refers to an existing wireless network, usually with an interface to a wired network, for Internet and email access, file sharing, and print and other services. Ad Hoc -- Refers to a temporary wireless network that has been set up by another user. Start Ad-Hoc Network -- Permits you to set up a new ad-hoc network to communicate with other PCs without using an access point. Channel In infrastructure networks, the channel used for radio communications is determined at the access point and for ad-hoc networks; the channel is determined by the user who starts the network. It is necessary to select a channel only if you are starting a new ad-hoc network. 2Authentication The authentication and encryption settings provide options for configuring a secure connection between your PC and access point. The following authentication options are available: Open -- No authentication Share -- Authentication based on shared keys See Wireless Security for background on wireless security options and guidelines for security settings in the enterprise, small office, and home environments. Encryption Type The following encryption options are available: None -- No encryption WEP -- Encryption based on shared WEP keys See Wireless Security for background on wireless security options and guidelines for security settings in the enterprise, small office, and home environments. Encryption Encryption Enter up to 4 encryption keys, if the encryption type is WEP. The radio buttons under Default provide for default selection of one of the up to 4 WEP keys that may be entered. The keys are 64-bit or 128-bit and may be specified in ASCII (text) or hexadecimal (numeric) format: ASCII - 5 ASCII characters (64-bit); 13 ASCII characters (128-bit) Hexadecimal - 10 ASCII characters (64-bit); 26 hexadecimal digits (128-bit) 2 Channel selection will be restricted based on country code programmed into the client adapter EEPROM. Installation and User Guide: Wireless LAN Client Page 23 of 36

Wireless Security Although security is important in any network, the characteristics of wireless networks can make them vulnerable to attack. Unlike wired networks, which require a physical connection that can be secured with lock and key, wireless networks require only a radio signal for communication, and physical barriers do not provide protection. A concern since the introduction of the IEEE 802.11 wireless communication standard, wireless security continues to evolve, as shortcomings of existing security solutions are uncovered and new solutions are adopted. Wireless security encompasses two major components: encryption and authentication. Encryption is the means by which data transferred across the wireless link are protected from eavesdropping. Authentication is the means by which the identity of your PC or your identity, or both, are confirmed so that you have permission to use the network. Authentication This section provides an overview of authentication options. The most effective authentication options available today are supported either through the Client Utility or by leveraging the Microsoft Wi-Fi software implementations. For further information, see Client Utility Security Options. Effective authentication methods rely on manual distribution of shared or pre-shared authentication keys or automatic generation of keys by a RADIUS (Remote Authentication Dial-In User Service) server. A shared or pre-shared key is an authentication string entered at the access point and client PCs. Authentication takes place by matching the key stored in each PC with the key stored in the access point. Automatic key-generation methods rely upon digital certificates, which contain encoded user and encryption information to verify the identity of a user and match it with a database of secure user records. A certificate authority is the network service that manages digital certificates and guarantees their integrity. The IEEE 802.1X standard specifies certificate-based authentication using EAP (Extensible Authentication Protocol). EAP, in turn, comes in numerous variations. Most enterprises manage remote access to the certificate authority using a RADIUS (Remote Authentication Dial-In User Service) server. In this arrangement, client PC users install RADIUS client software on their local PCs to provide RADIUS server access. Funk Software and Microsoft are the major suppliers of RADIUS client software. For home or small office networks, shared or pre-shared keys can provide adequate authentication without the burden of centralized management and control. A built-in RADIUS security portal is provided in the Access Point to extend the management and scalability features of centralized management to administrators in small-to-mid sized office environments. Installation and User Guide: Wireless LAN Client Page 25 of 36

Encryption This section provides an overview of encryption options. The most effective authentication options available today are supported either through the Client Utility or by leveraging the Microsoft Wi-Fi software implementations. For further information, see Client Utility Security Options. Encryption protects wireless data from being intercepted and deciphered during transmission, and thereby assures the security of your data. The Client Adapter is compatible with the following options: AES (Advanced Encryption Standard) -- Excellent, financial-grade security TKIP (Temporal Key Integrity Protocol) -- Good security, used as an upgrade to legacy systems WEP (Wired Equivalent Privacy) -- Minimal protection security, acceptable for non-critical data Open or no encryption -- No protection, use for non-critical communications or with other security protection such as https or VPN/IPsec for corporate communications The most effective encryption methods are part of the WPA (Wi-Fi Protected Access) cipher suite and are recommended for all environments in which security is an important consideration, whether in the enterprise, small office or home. WPA provides much more complete protection against discovery of encryption keys than do the WEP standards. WPA itself has already spawned two generations of encryption technology, with AES being the latest and most effective standard. TKIP is the encryption protocol that was first introduced with WPA, but it provides less complete protection than does AES. The original 802.11 wireless communication specification standard included WEP for wireless security. Still widely used today, WEP security provides some security protection, but can be vulnerable to attack. Use WEP in cases where the access point does not support higher level security and security is a consideration in your network design. .The WEP algorithm requires an encryption key or keys to be used in the encrypting and decrypting of data. The Client Utility uses 64-bit or 128-bit encryption keys, which may be specified in ASCII (text) or hexadecimal (numeric) format: ASCII keys must be 5 characters in length (64-bit) or 13 characters in length (128-bit) Example: 64-bit: mynm5 ; 128-bit: 17keycode1298 Hexadecimal keys must be 10 hex digits in length (64-bit) or 26 hex digits in length (128-bit), where hex digits are in the range 0-9, a, b, c, d, e, f). Example: 64-bit: 55772abbcc ; 128-bit: 12340987afcb45677fdc789045 The Client Utility supports as many as four WEP keys. Page 26 of 36 Installation and User Guide: Wireless LAN Client

Clear the checkbox entitled Use Windows to configure my wireless network settings. Click OK. You can now use the Client Utility to manage your wireless connections. Installation and User Guide: Wireless LAN Client Page 29 of 36

Glossary This glossary defines terms that apply to wireless and networking technology. 802.1x Standard for port-based authentication in LANs. Identifies each user and allows connectivity based on policies in a centrally managed server. 802.11 Refers to the set of WLAN standards developed by IEEE. The three commonly in use today are 802.11a, 802.11b, and 802.11g, sometimes referred to collectively as Dot11. access control list (ACL) A list of services used for security of programs and operating systems. Lists users and groups together with the access awarded for each. access point (AP) An inter-networking device that connects wired and wireless networks together. Also, an 802.11x capable device that may support one or more 802.11 network interfaces in it and coordinates client stations to establish an Extended Service Set 802.11 network Advanced Encryption Standard (AES) An encryption algorithm developed for use by U.S. government agencies; now incorporated into encryption standards for commercial transactions. ad-hoc network A group of nodes or systems communicating with each other without an intervening access point. Many wireless network cards support ad-hoc networking modes. authentication server A central resource that verifies the identity of prospective network users and grants access based on pre-defined policies. authentication zone A administrative grouping of resources for user authentication. backhaul The process of getting data from a source and sending it for distribution over the main backbone network. Wireless backhaul refers to the process of delivering data from a node on the wireless network back to the wired network. Also referred to as WDS.x. Basic Service Set (BSS) The set of all wireless client stations controlled by a single access point. bridge A connection between two (or more) LANs using the same protocol. Virtual bridges are used as a means of defining layer 2 domains for broadcast messages. Each virtual bridge uniquely defines a virtual local area network (VLAN). Class of Service (COS) A method of specifying and grouping applications into various QoS groups or categories. client utility This application executes on a station and provides management and diagnostics functionality for the 802.11 network interfaces. Page 30 of 36 Installation and User Guide: Wireless LAN Client

Differentiated Services Code Point (DSCP) A system of assigning Quality of Service "Class of Service" tags. Domain Name Service (DNS) A standard methodology for converting alphanumeric Internet domain names to IP addresses. Dynamic Host Configuration Protocol (DHCP) A communications protocol enabling IP address assignments to be managed both dynamically and centrally. With DHCP enabled on a node (a system, device, network card, or access point), when it boots or is connected to a network, an address is automatically assigned. Each assigned address is considered to be "leased" to a specific node; when the lease expires, a new IP can be requested and/or automatically reassigned. Without DHCP, IP addresses would need to be entered manually for each and every device on the network. dynamic IP address A TCP/IP network address assigned temporarily (or dynamically) by a central server, also known as a DHCP server. A node set to accept dynamic IPs is said to be a "DHCP client." Extensible Authentication Protocol (EAP) Standard that specifies the method of communication between an authentication server and the client, or supplicant, requesting access to the network. EAP supports a variety of authentication methods. Extensible Authentication Protocol Over LAN (EAPOL) Protocol used for 802.1x authentication. EAP-TLS EAP using Transport Layer Security. EAP-based authentication method based on X.509 certificates, which provides mutual, secure authentication. Certificates must be maintained in the authentication server and supplicant. EAP-PEAP Protected EAP-based authentication method based on X.509 certificates. Uses a two-phase approach in which the server is first authenticated to the supplicant. This establishes a secure channel over which the supplicant can be authenticated to the server. Extended Service Set (ESS) A set of multiple connected BSSes. From the perspective of network clients, the ESS functions as one wireless network; clients are able to roam between the BSSs within the ESS. ESSID Name or identifier of the ESS used in network configuration. hostname The unique, fully qualified name assigned to a network computer, providing an alternative to the IP address as a way to identify the computer for networking purposes. Hypertext Transfer Protocol (HTTP) Protocol governing the transfer of data on the World Wide Web between servers and browser (and browser enabled software applications). Hypertext Transfer Protocol over SSL (HTTPS) A variant of HTTP that uses Secure Sockets Layer (SSL) encryption to secure data transmissions. HTTPS uses port 443, while HTTP uses port 80. Installation and User Guide: Wireless LAN Client Page 31 of 36

Independent Basic Service Set (IBSS) A set of clients communicating with each other or with a network via an access point. Internet Protocol (IP) The network layer protocol for routing packets through the Internet. IP address 32-bit number, usually presented as a period-separated (dotted decimal) list of three-digit numbers, which identifies an entity on the Internet according to the Internet Protocol standard. local area network (LAN) A group of computers, servers, printers, and other devices connected to one another, with the ability to share data between them. management information bases (MIBs) A database of objects that can be monitored by a network management system. Both SNMP and RMON use standardized MIB formats that allows any SNMP and RMON tools to monitor any device defined by a MIB. maskbits Number of bits in the subnet prefix for an IP address, (provides the same information as subnet mask). Each triplet of digits in an IP address consists of 8 bits. To specify the subnet in maskbits, count the number of bits in the prefix. To specify using a subnet mask, indicate the masked bits as an IP address. Example: subnet mask 255.255.255.0 is equivalent to 24 maskbits, which is the total number of bits in the 255.255.255 prefix. Media Access Control (MAC) address A unique hardware-based equipment identifier, set during device manufacture. The MAC address uniquely identifies each node of a network. Access points can be configured with MAC access lists, allowing only certain specific devices to connect with the LAN through them, or to allow certain MAC-identified network cards or devices access only to certain resources. MAC address authentication Method of authenticating clients by using the MAC address of the client station rather than a user ID. Network Address Translation (NAT) The translation of one IP address used within a network to another address used elsewhere. One frequent use of NAT is the translation of IPs used inside a company, versus the IP addresses visible to the outside world. This feature helps increase network security to a small degree, because when the address is translated, it is an opportunity to authenticate the request and/or to match it to known, authorized types of requests. NAT is also used sometimes to map multiple nodes to a single outwardly visible IP address. Network Interface Card (NIC) Generic term for network interface hardware that includes wired and wireless LAN adapter cards, PC Cardbus PCMCIA cards, and USB-to-LAN adapters. network management system (NMS) Software application that controls a network of multiple access points and clients. node Generic term for a network entity. Includes an access point, network adapter (wireless or wired), or network appliance (such as a print server or other non-computer device). Page 32 of 36 Installation and User Guide: Wireless LAN Client

Network Time Protocol (NTP) NTP servers are used to synchronize clocks on computers and other devices. APs have the capability to connect automatically to NTP servers to set their own clocks on a regular basis. Packet INternet Groper (PING) A utility that determines whether a specific IP address is accessible, and the amount of network time (measured in milliseconds) needed for response. PING is used primarily to troubleshoot Internet connections. policy-based networking The management of a network with rules (or policies) governing the priority and availability of bandwidth and resources, based both on the type of data being transmitted and the privileges assigned to a given user or group of users. This allows network administrators to control how the network is used in order to help maximize efficiency. Power over Ethernet (PoE) Power supplied to a device by way of the Ethernet network data cable instead of an electrical power cord. preamble type The preamble defines the length of the cyclic redundancy check (CRC) block for communication between the access point and a roaming network adapter. All nodes on a given network should use the same preamble type. Quality of Service (QoS) QoS is a term encompassing the management of network performance, based on the notion that transmission speed, signal integrity, and error rates can be managed, measured, and improved. In a wireless network, QoS is commonly managed through the use of policies. Remote Authentication Dial-In User Service (RADIUS) A client/server protocol and software that enables remote access servers to communicate with a central server in order to authenticate users and authorize service or system access. RADIUS permits maintenance of user profiles in a central repository that all remote servers can share. radio frequency (RF) The electromagnetic wave frequency radio used for communications applications. roaming Analogous to the way cellular phone roaming works, roaming in the wireless networking environment is the ability to move from one AP coverage area to another without interruption in service or loss in connectivity. rogue AP An access point that connects to the wireless network without authorization. Secure Shell (SSH) Also known as the Secure Socket Shell, SSH is a UNIX-based command line interface for secure access to remote systems. Both ends of a communication are secured and authenticated using a digital certificate, and any passwords exchanged are encrypted. Service Set Identifier (SSID) The SSID is a unique identifier attached to all packets sent over a wireless network, identifying one or more wireless network adapters as "belonging" to a common group. Some access points can support multiple SSIDs, allowing for varying privileges and capabilities based on user roles. Secure Sockets Layer (SSL) A common protocol for message transmission security on the Internet. Existing as a program layer between the Internet's Hypertext Transfer Installation and User Guide: Wireless LAN Client Page 33 of 36

Protocol (HTTP) and Transport Control Protocol (TCP) layers, SSL is a standard feature in Internet Explorer, Netscape, and most web server products. Simple Mail Transfer Protocol (SMTP) Protocol used to transfer email messages between email servers. Simple Network Management Protocol (SNMP) An efficient protocol for network management and device monitoring. SNMP trap A process that filers SNMP messages and saves or drops them, depending upon how the system is configured. Spanning Tree Protocol (STP) A protocol that prevents bridging loops from forming due to incorrectly configured networks. Station (STA) An 802.11 capable device that supports only one 802.11 network interface, capable of establishing a Basic Service Set 802.11 network (i.e., peer-to-peer network). static IP address A permanent IP address assigned to a node in a TCP/IP network. subnet A portion of a network, designated by a particular set of IP addresses. Provides a hierarchy for addressing in LANs. Also called a subnetwork. subnet mask A TCP/IP addressing method for dividing IP-based networks into subgroups or subnets (compare with maskbits). Each triplet of digits in an IP address consists of 8 bits. To specify using a subnet mask, indicate the masked bits as an IP address. To specify the subnet in maskbits, count the number of bits in the prefix. Example: subnet mask 255.255.255.0 is equivalent to 24 maskbits, which is the total number of bits in the 255.255.255 prefix. Temporal Key Integrity Protocol (TKIP) Part of the IEEE 802.11i encryption standard, TKIP provides improvements to WEP encryption, including per-packet key mixing, message integrity check, and a re-keying mechanism. Traffic Class Identifier (TCID) Part of the standard 802.11 frame header. The 3-bit TCID is used for mapping to class-of-service values. Transmission Control Protocol/Internet Protocol (TCP/IP) One of the most commonly used communication protocols in modern networking. Addresses used in TCP/IP usually consist of four triplets of digits, plus a subnet mask (for example, 192.168.25.3, subnet 255.255.255.0). Transport Layer Security (TLS) A protocol that provides privacy protection for applications that communicate with each other and their users on the Internet. TLS is a successor to the Secure Sockets Layer (SSL). True MIMO? The Airgo Networks, Inc. implementation of the data multiplexing technique known as Multiple Input Multiple Output (MIMO). MIMO uses multiple spatially-separated antennas to increase wireless throughput, range, and spectral efficiency by simultaneously transmitting multiple data streams on the same frequency channel. Page 34 of 36 Installation and User Guide: Wireless LAN Client

Trunk In telecommunications, a communications channel between two switching systems. In a wireless network, a trunk is a wireless connection from one Access Point to another. Type of Service (ToS) Sometimes also called IP Precedence, ToS is a system of applying QoS methodologies, based on headers placed into transmitted IP packets. User Datagram Protocol (UDP) A connectionless protocol similar to TCP/IP, but without the same level of error checking. UDP is commonly used when some small degree of error and packet loss can be tolerated without losing program integrity, such as for online games. virtual LAN (VLAN) A local area network with a definition that addresses network nodes on some basis other than physical location or even whether the systems are wired together or operating using the same local equipment. VLANs are, on average, much easier to manage than a physically implemented LAN. In other words, moving a user from one VLAN to another is a simple change in software, whereas on a regular LAN, the computer or device would need to be connected physically to a different switch or router to accomplish the same thing. Network management software of some sort is used to configure and manage the VLANs on a given network. Wired Equivalent Privacy (WEP) Security protocol for wireless local area networks (WLANs) defined in the 802.11b standard. Uses dynamically or manually assigned keys for encryption and authentication, as dictated by the capabilities of the client station. The WEP algorithms are vulnerable to compromise; therefore, WEP security is only recommended for legacy clients that do not support the newer generation security standards. Windows Internet Name Server (WINS) The Windows implementation of DNS, which maps IP addresses to computer names (NetBIOS names). This allows users to access resources by computer name instead of by IP address. Wi-Fi A play on the term "HiFi," Wi-Fi stands for Wireless Fidelity, a term for wireless networking technologies. Wi-Fi Protected Access Wi-Fi Alliance-sponsored security solution that addresses many of the WEP inadequacies. Originally promulgated as an interim solution, WPA is now included as part of the IEEE 802.11i standard. wireless local area network (WLAN) A type of local area network that employs radio frequencies to transmit data (usually encrypted), much like LANs transmit data over wires and fiber optic cables. Installation and User Guide: Wireless LAN Client Page 35 of 36

Regulatory FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment, and users must follow specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other transmitter or antenna. This equipment has been SAR – evaluated and is authorized for use in laptop and notebook computers. Page 36 of 36 Installation and User Guide: Wireless LAN Client

Navigation menu