Aionex RFIDRW01 RFID READER/ WRITER User Manual USERS MANUAL

Aionex Inc. RFID READER/ WRITER USERS MANUAL

USERS MANUAL

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15.225 Transmitter Certification 13.56MHz RFID Reader/Writer Test Report FCC ID: UEJRFIDRW01 FCC Rule Part: 15.225 ACS Report Number: 06-0215-15C Manufacturer: AIONEX Model: RFID Reader/Writer Installation and Operators Guide
Model: UEJRFIDRW01Version: 1.013.56MHz RFID Reader/WriterOperator’s Guide
Operator’s Guide UEJRFIDRW01 Rev. APage 3 of 10AIONEX Inc.8 2006 Copyright Aionex, Inc.AIONEX Inc.104 Space Park NorthGoodlettsville, TN 37072Phone: 615-338-5050Fax: 615-851-5644www.aionex.comThe contents of this document may not be copied, transmitted, published, or disclosed to others without prior written authorization.
Operator’s Guide UEJRFIDRW01 Rev. APage 4 of 10 AIONEX Inc.Table of ContentsTable of Contents ..........................................................................................4FCC Compliance Information .......................................................................5Product Overview ..........................................................................................6General Description ............................................................................6Technical Data ....................................................................................6Assembly and Wiring .....................................................................................7PS2 Power Connection ........................................................................7Asynchronous Interface RS232 ...........................................................7Audio and Visual Elements ............................................................................8Bi-color LED .........................................................................................8Signal Buzzer .......................................................................................8Accessories ...................................................................................................9
Operator’s Guide UEJRFIDRW01 Rev. APage 5 of 10AIONEX Inc.FCC Class A:“Note: This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.”NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Operator’s Guide UEJRFIDRW01 Rev. APage 6 of 10 AIONEX Inc.The following sections provide an overview of the AIONEX RFID Reader/Writer.Product OverviewThe AIONEX RFID Reader/Writer is a multi-protocol desktop, wall mount, or handheld radio frequency identification (RFID) data collection device. The Reader is designed to communicate with most industry standard 13.56 MHz RFID tags and smart labels. The Reader has an internal antenna with a typical read/write range of several inches.The Reader has an attached interface cable with a PS2 jumper cable for power. An asynchronous RS232 interface provides for host communication to a PC or terminal.The Reader is ideal for use in a variety of medical, industrial, commercial, and field service environments.General descriptionFrequency Host Communication Interface/Data Rate13.56 MHz +/- 7 kHz UART (RS232): 9600 bps/8/n/1Physical ComplianceLength: 143 mm FCC Part 15.225Width: 63.5 mm Transponder Communication RateHeight: 31.75 mm 26 kbps ISO 15693Current Consumption 106 kbps ISO 14443AScan Mode: 100 mA Effective RageStandby: 17 mA 70 mm ISO 15693Antenna (Individual results may vary with environment)Internal PCB Tag CompatibilitySupply Voltage ISO 15693, ISO 14443A, Tag-It HF, ICode 1,+5VDC ICode SLI, my-d, LR1512, Pico Tag, GemWave,MifareTechnical data
Operator’s Guide UEJRFIDRW01 Rev. APage 7 of 10AIONEX Inc.The following sections describe the interface cable and PS2 power connection.Assembly and WiringPlug the Reader’s PS2 connector into an available PS2 port. If no PS2 port is available then an alternative power source must be provided.PS2/MPin 4 +5VDCPin 3 GroundPS2 power connectionAsynchronous interface RS232Plug the Reader’s DB9/F connector into an available RS232 serial port on a PC or other terminal. A standard three-wire interface (Rx, Tx, and Gnd) is used. Secondary power connections are provided for added flexibility.RS232 port configuration9600, N,8,1DB9/FPin 2 TxPin 3 RxPin 5 GroundPin 6 +5VDCPin 9 Ground
Operator’s Guide UEJRFIDRW01 Rev. APage 8 of 10 AIONEX Inc.Audio and Visual ElementsThe Reader’s Bi-color LED is configured and controlled through software.Typical Bi-color LED usageLED green Turns on when a label is detected and read.LED red Turns on when a read error has occurred.Bi-color LEDThe Reader’s signal buzzer is configured and controlled through software.Typical signal buzzer usageBuzzer ON Active when a label is detected and read.Signal buzzer
Operator’s Guide UEJRFIDRW01 Rev. APage 9 of 10AIONEX Inc.The following accessories are available for the AIONEX RFID Reader/Writer.Smart L - Wall HolderAIONEX RFID RS232/485 Wall Plate AdapterAccessories

Navigation menu