Aeon Labs DSD37 Z-Wave Network Repeater User Manual Repeater

Aeon Labs LLC. Z-Wave Network Repeater Repeater

Manual

Repeater
Guide ContentsAeotec RepeaterFamiliarise yourself with your RepeaterQuick StartIf you’re using a Z-StickIf you’re using a MinimoteAdvanced FunctionsIf you’re using a Z-StickIf you’re using a Minimote1 .2 .3 .4 .5 . Warranty121234567
Aeotec Repeater can be used as a Z-Wave network repeater.1Aeotec RepeaterPlaced Repeater to the right position, it can work well.2Familiarise yourself with your repeater-   -1Outlet RepeaterSwitchFixing holesProduct use Instruction
-   -2Quick Start3Getting your Aeotec Repeater up and running is as simple as plugging it into a  wall  outlet  and  linking  it  to  your  existing  Z-Wave network. The  following instructions tell you how to link your Repeater to your Z-Wave network using Aeotec's Z-Stick or Minimote controllers. If you are using other products as your  main  Z-Wave  controller,  please  refer  to  the  part  of  their  respective manuals that tells you how add new devices to your network.If you’re using a Z-Stick:D e c i d e  o n  w he r e  y o u  w a n t  y o u r Repeater to be placed and plug it in. Its main light will begin to blink.If your Z-Stick is plugged into a gateway or a computer, unplug it.Take  your  Z-Stick  to  your Repeater Press the Action Button on your Z-Stick.Pr e s s  t h e  A c ti o n  B utt o n  o n  yo u r Repeater.I f   y o u r   R e p e a t e r  has been successfully linked to your network, its light will no longer blink.  If  the linking  was  unsuccessful  the  light  will continue to blink.Press  the Action  Button  on  the  Z-Stick to take it it out of installation mode.1 .2 .3 .4 .5 .6 .7 .
-   -3If you’re using a Minimote:Decide on where  you want your  Repeater to be placed  and plug it in.  Its main light will begin to blink.Take your Minimote to your Repeater.Press the Include on your Minimote.Press the Action Button on your Repeater.If  your  Repeater  has  been  successfully  linked  to  your  network, its  light will no longer blink. If the linking was unsuccessful the light will continue to blink.Press any button on your Minimote to take it it out of installation mode.1 .2 .3 .4 .5 .6 .Now that your Repeater is up and running .Include
-   -44Advanced FunctionsYour Repeater can be removed from your Z-Wave network at any time. You'll need to use your Z-Wave network's main controller to do this. The following instructions  tell  you  how  to  do  this  using  Aeotec's  Z-Stick  and  Minimote controllers. If you are using other products as your main Z-Wave controller, please  refer  to  the  part  of  their  respective  manuals  that  tells  you  how remove devices from your network.Removing your Repeater from a Z-Wave networkIf you’re using a Z-Stick:If  your  Z-Stick  i s  plugged  into  a gateway or a computer, unplug it.Take your Z-Stick to your Repeater.Press  the  Action  Button  on  your  Z-Stick.Press  the  Ac t i o n  B u t t o n  o n  your Repeater.If your Repeater has been successfully removed  from  your  network,  its  light w i l l  b l i n k .  I f   t h e  r e m o v a l   w a s unsuccessful its light will not blink.Press  the Action Button on the Z-Stick to take it it out of removal mode.1 .2 .3 .4 .5 .6 .
-   -5If you’re using a Minimote:Take your Minimote to your Repeater.Press the Remove Button on your Minimote.Press the Action Button on your Repeater.If your  Repeater  has been  successfully  removed  from  your  network, its  light  will  blink.  If  the  removal  was  unsuccessful  its  light  will  not blink.Press any button on your Minimote to take it it out of removal mode.1 .2 .3 .4 .5 .Remove
-   -6Warranty5Aeon  Labs  warrants  to  the  original  purchaser  of  Products  that  for  the Warranty Period (as defined below), the Products will be free from material defects in materials and workmanship. The foregoing warranty is subject to the  proper  installation,  operation  and  maintenance  of  the  Products  in accordance with installation instructions and the operating manual supplied to Customer.  Warranty claims  must be made by Customer  in writing within thirty (30) days of the manifestation of a problem. Aeon Labs' sole obligation under the foregoing warranty is, at Aeon Labs' option, to repair, replace  or correct any such defect that was present at the time of delivery, or to remove the Products and to refund the purchase price to Customer. The  "Warranty  Period"  begins  on  the  date  the  Products  is  delivered  and continues for 12 months. Any  repairs  under this warranty  must be conducted by an  authorized Aeon Labs service representative  and under Aeon Labs’RMA policy. Any repairs conducted by unauthorized persons shall void this warranty.Excluded from the warranty are problems due to accidents, acts of God, civil or military authority, civil disturbance, war, strikes, fires, other catastrophes, misuse,  misapplication,  storage  damage,  negligence,  electrical  power problems, or modification to the Products or its components.
-   -7Aeon Labs does not authorize any person or party to assume or create for it any other obligation or liability in connection with the Products except as set forth herein. Aeon Labs will pass on to Customer all  manufacturers’ Material warranties to the  extent  that they  are transferable, but  will not independently  warrant any Material.Customer  must  prepay  shipping  and  transportation  charges  for  returned Products,  and  insure  the  shipment  or  accept  the  risk  of  loss  or  damage during  such  shipment  and  transportation. Aeon  Labs  will  ship the  repaired or replacement products to Customer freight prepaid.Customer  shall  indemnify,  defend,  and  hold  Aeon  Labs  and  Aeon  Labs’ affiliates, shareholders, directors, officers, employees, contractors, agents and  other  representatives  harmless  from  all  demands,  claims,  actions, causes  of  action,  proceedings,  suits,  assessments,  losses,  damages, liabilities,  settlements,  judgments,  fines,  penalties,  interest,  costs  and expenses  (including  fees  and  disbursements  of  counsel)  of every kind  (I) based upon personal injury or death or injury to property to the extent any of the foregoing is proximately caused either by a defective product (including strict  liability  in  tort)  or  by  the  negligent  or  willful  acts  or  omissions  of Customer  or  its  officers,  employees,  subcontractors  or  agents,  and/or  (ii) arising from or relating to any actual or alleged infringement or
-   -8misappropriation  of  any  patent,  trademark,  mask  work,  copyright,  trade secret  or  any  actual  or  alleged  violation  of  any  other  intellectual  property rights  arising  from  or in  connection with the  products,  except to  the  extent that  such  infringement  exists  as  a  result  of  Aeon  Labs’  manufacturing processes.IN  NO  EVENT  SHALL  AEON  LABS  BE  LIABLE  FOR  ANY  INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR  LOSS  OF PROFITS,  REVENUE, OR USE  INCURRED  BY CUSTOMER  OR  ANY  THIRD  PARTY,  WHETHER  IN  AN  ACTION  IN CONTRACT,  OR  TORT,  OR  OTHERWISE  EVEN  IF  ADVISED  OF  THE POSSIBILITY  OF  SUCH  DAMAGES.  AEON  LABS’  LIABILITY AND CUSTOMER’  S  EXCLUSIVE REMEDY  FOR  ANY  CAUSE  OF  ACTION ARISING  IN  CONNECTION  WITH  THIS  AGREEMENT  OR  THE  SALE  OR USE OF THE PRODUCTS, WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY,  BREACH  OF  WARRANTY,  BREACH  OF  AGREEMENT,  OR EQUITABLE  PRINCIPLES,  IS  EXPRESSLY LIMITED TO,  AT AEON  LABS’ OPTION,  REPLACEMENT  OF,  OR REPAYMENT  OF  THE  PURCHASE PRICE FOR THAT PORTION OF PRODUCTS WITH RESPECT TO WHICH DAMAGES  ARE  CLAIMED.  ALL  CLAIMS  OF  ANY  KIND  ARISING  IN CONNECTION  WITH  THIS AGREEMENT  OR  THE  SALE  OR  USE  OF PRODUCTS  SHALL  BE  DEEMED  WAIVED  UNLESS  MADE  IN  WRITING WITHIN  THIRTY  (30)  DAYS  FROM  AEON  LABS’  S  DELIVERY,  OR  THE DATE FIXED FOR DELIVERY IN THE EVENT OF NONDELIVERY.
-   -9FCC NOTICE (for USA):THE  INDEMNITY  AND  WARRANTY  IN  ABOVE  ARE  EXCLUSIVE  AND  IN LIEU  OF  ALL  OTHER  INDEMNITIES  OR  WARRANTIES,  WHETHER EXPRESS  OR  IMPLIED,  INCLUDING  THE  IMPLIED  WARRANTIES  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.THE  MANUFACTURER  IS  NOT  RESPONSIBLE  FOR  ANY  RADIO  OR  TV INTERFERENCE  CAUSED  BY  UNAUTHORIZED  MODIFICATIONS  TO THIS  EQUIPMENT.  SUCH  MODIFICATIONS  COULD  VOID  THE  USER’S AUTHORITY TO OPERATE THE EQUIPMENT.This device may not cause harmful interference, andThis device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to  comply with  the  limits  for  a  Class  B  digital  device,  pursuant  to part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide reasonable  protection  against  harmful  interference  in  a  residential installation.  This  equipment  generates,  uses  and  can  radiate  radio frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the instructions,  may cause harmful  interference  to  radio  communications.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1.2.
-   -10Warning:However,   there is no   guarantee    that    interference    will  not occur in a particular installation. If this equipment does cause harmful interference to radio  or television reception,  which can  be determined by turning the equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.Contact  your  local  government  for  information  regarding  the  collection systems available.
-   -11Certifications (regional):www.aeon-labs.com www.aeotec.comVersion:14A0010038-AA
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:    Reorient or relocate the receiving antenna.    Increase the separation between the equipment and receiver.    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.    Consult the dealer or an experienced radio/TV technician for help.  Caution:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

Navigation menu