Advantech Co WISE4000 IoT Wireless I/O Module User Manual V4 12 EA User Manual

Advantech Co Ltd IoT Wireless I/O Module V4 12 EA User Manual

Contents

Users Manual-1

User ManualWISE-4000 SeriesIoT Ethernet I/O Module
WISE-4000 User Manual iiCopyrightThe documentation and the software included with this product are copyrighted 2015by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the rightto make improvements in the products described in this manual at any time withoutnotice. No part of this manual may be reproduced, copied, translated or transmittedin any form or by any means without the prior written permission of Advantech Co.,Ltd. Information provided in this manual is intended to be accurate and reliable. How-ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-ments of the rights of third parties, which may result from its use.AcknowledgementsIntel and Pentium are trademarks of Intel Corporation.Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.All other product names or trademarks are properties of their respective owners.Product WarrantyAdvantech warrants to you, the original purchaser, that each of its products will befree from defects in materials and workmanship for two years from the date of pur-chase. This warranty does not apply to any products which have been repaired or altered bypersons other than repair personnel authorized by Advantech, or which have beensubject to misuse, abuse, accident or improper installation. Advantech assumes noliability under the terms of this warranty as a consequence of such events.Because of Advantech’s high quality-control standards and rigorous testing, most ofour customers never need to use our repair service. If an Advantech product is defec-tive, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials,service time and freight. Please consult your dealer for more details.If you think you have a defective product, follow these steps:1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.3. If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly.4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.Part No. 2003D40001 Edition 2Printed in Taiwan July 2015
iii WISE-4000 User Manual Declaration of ConformityCEThis product has passed the CE test for environmental specifications. We recom-mend the use of shielded cables. .Technical Support and Assistance1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product.2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call:–Product name and serial number–Description of your peripheral attachments–Description of your software (operating system, version, application software, etc.)–A complete description of the problem–The exact wording of any error messagesSafety Instructions1. Read these safety instructions carefully.2. Keep this User Manual for later reference.
WISE-4000 User Manual iv3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.4. For plug-in equipment, the power outlet socket must be located near the equip-ment and must be easily accessible.5. Keep this equipment away from humidity.6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.7. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.10. All cautions and warnings on the equipment should be noted.11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.12. Never pour any liquid into an opening. This may cause fire or electrical shock.13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.14. If one of the following situations arises, get the equipment checked by service personnel:–The power cord or plug is damaged.–Liquid has penetrated into the equipment.–The equipment has been exposed to moisture.–The equipment does not work well, or you cannot get it to work according to the user's manual.–The equipment has been dropped and damaged.–The equipment has obvious signs of breakage.15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.17. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A).DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantechdisclaims all responsibility for the accuracy of any statements contained herein.
v WISE-4000 User Manual ContentsChapter 1 Product Overview ................................11.1 Introduction ............................................................................................... 21.2 Feature Highlights ..................................................................................... 21.2.1 RESTful Web Service ................................................................... 21.2.2 Data Storage Function .................................................................. 31.2.3 IoT Cloud Function........................................................................ 31.3 Series Family and Specifications ............................................................. 41.3.1 Series Family ............................................................................... 41.4 Mechanical Design and Dimensions ......................................................... 51.4.1 WISE-4000 Wireless Series Dimensions..................................... 51.4.2 WISE-4000/LAN Dimensions........................................................ 51.5 Switch........................................................................................................ 61.6 LED Definition ........................................................................................... 61.7 Certification and Safety Standard ............................................................. 71.8 Package Information ................................................................................. 8Chapter 2 Product Specifications........................92.1 General Specification .............................................................................. 102.2 WISE-4010/LAN...................................................................................... 122.2.1 I/O Specification.......................................................................... 122.2.2 Application Wiring ....................................................................... 13Figure 2.1 WISE-4010/LAN Current Input Wiring Diagram ....... 13Figure 2.2 WISE-4010/LAN Digital Output Wiring Diagram....... 132.2.3 Pin Assignment ........................................................................... 14Figure 2.3 WISE-4010/LAN Pin Assignment ............................. 142.2.4 Block Diagram............................................................................. 14Figure 2.4 WISE-4010/LAN Block Diagram............................... 142.3 WISE-4050/LAN...................................................................................... 142.3.1 I/O Specification.......................................................................... 142.3.2 Application Wiring ....................................................................... 15Figure 2.5 WISE-4050/LAN Digital Input Wiring Diagram ......... 15Figure 2.6 WISE-4050/LAN Digital Output Wiring Diagram....... 152.3.3 Pin Assignment ........................................................................... 16Figure 2.7 WISE-4050/LAN Pin Assignment ............................. 162.3.4 Block Diagram............................................................................. 16Figure 2.8 WISE-4050/LAN Block Diagram............................... 162.4 WISE-4060/LAN...................................................................................... 172.4.1 I/O Specification.......................................................................... 172.4.2 Application Wiring ....................................................................... 18Figure 2.9 WISE-4060/LAN Digital Input Wiring Diagram ......... 18Figure 2.10WISE-4060/LAN Relay Output Wiring Diagram ....... 182.4.3 Pin Assignment ........................................................................... 19Figure 2.11WISE-4060/LAN Pin Assignment ............................. 192.4.4 Block Diagram............................................................................. 19Figure 2.12WISE-4060/LAN Block Diagram............................... 192.5 WISE-4012E ........................................................................................... 202.5.1 I/O Specification.......................................................................... 202.5.2 Application Wiring ....................................................................... 22Figure 2.13WISE-4012E Voltage Input Wiring Diagram............. 22
WISE-4000 User Manual viFigure 2.14WISE-4012E Digital Input Wiring Diagram............... 22Figure 2.15WISE-4012E Relay Output Wiring Diagram ............. 222.5.3 Pin Assignment........................................................................... 23Figure 2.16WISE-4012E Pin Assignment................................... 232.5.4 Block Diagram ............................................................................ 23Figure 2.17WISE-4012E Block Diagram .................................... 232.6 WISE-4050.............................................................................................. 242.6.1 I/O Specification.......................................................................... 242.6.2 Application Wiring ....................................................................... 25Figure 2.18WISE-4050 Digital Input Wiring Diagram ................. 25Figure 2.19WISE-4050 Digital Output Wiring Diagram .............. 252.6.3 Pin Assignment........................................................................... 25Figure 2.20WISE-4050 Pin Assignment ..................................... 252.6.4 Block Diagram ............................................................................ 26Figure 2.21WISE-4050 Block Diagram....................................... 262.7 WISE-4060.............................................................................................. 272.7.1 I/O Specification.......................................................................... 272.7.2 Application Wiring ....................................................................... 28Figure 2.22WISE-4060 Digital Input Wiring Diagram ................. 28Figure 2.23WISE-4060 Relay Output Wiring Diagram ............... 282.7.3 Pin Assignment........................................................................... 28Figure 2.24WISE-4060 Pin Assignment ..................................... 282.7.4 Block Diagram ............................................................................ 29Figure 2.25WISE-4060 Block Diagram....................................... 29Chapter 3 Hardware Installation........................ 313.1 Interface Introduction .............................................................................. 323.2 Mounting ................................................................................................. 323.2.1 DIN-Rail Mounting ...................................................................... 32Figure 3.1 Mounting Kit Back View............................................ 32Figure 3.2 Installing the Mounting Kit for a DIN-Rail ................. 32Figure 3.3 Mounting on the DIN-Rail ......................................... 33Figure 3.4 Rear View of DIN-Rail Mounting .............................. 333.2.2 Wall Mounting............................................................................. 34Figure 3.5 Mounting Kit Dimensions.......................................... 34Figure 3.6 Wall Mounting........................................................... 35Figure 3.7 Wall Mounting Finished ............................................ 353.2.3 Stack Mounting ........................................................................... 36Figure 3.8 Stack Mounting......................................................... 36Figure 3.9 Finished Stack Mounting .......................................... 363.3 Wiring & Connections ............................................................................. 373.3.1 Power Supply Wiring (Not for WISE-4012E) .............................. 37Figure 3.10Power Supply Wiring ................................................ 373.3.2 USB Power (WISE-4012E Only)................................................. 37Figure 3.11USB Power Supply Wiring........................................ 383.3.3 I/O Units...................................................................................... 38Chapter 4 System Configuration....................... 394.1 Connection.............................................................................................. 404.2 Configure WISE Using the Web Interface............................................... 404.2.1 System Requirements ................................................................ 404.2.2 List of WISE-4000 Default Ethernet Ports ................................ 414.2.3 Factory Default Settings ............................................................. 41
vii WISE-4000 User Manual 4.2.4 Module Authorization .................................................................. 414.2.5 Operation Mode .......................................................................... 414.2.6 Using a Browser to Configure the Module ................................. 424.2.7 Configuring Cloud Server (WISE-4000 wireless series only)...... 584.3 Configure WISE-4000 with ADAM.NET Utility ........................................ 614.3.1 Operation Framework ................................................................. 614.3.2 Configure WISE-4000 ................................................................. 664.4 Site Survey Tool for WISE-4000 Wireless Series ................................... 694.4.1 Site Survey Architecture ............................................................ 694.4.2 Site Survey Mode........................................................................ 694.4.3 Site Survey Tool.......................................................................... 70Appendix A I/O Modbus Mapping Table...............71A.1 Modbus Function Code Introduction ....................................................... 72A.2 WISE-4010/LAN Modbus Mapping Table ............................................... 72A.3 WISE-4050/LAN Modbus Mapping Table ............................................... 76A.4 WISE-4060/LAN Modbus Mapping Table ............................................... 78A.5 WISE-4012E Wireless Modbus Mapping Table ...................................... 80A.6 WISE-4050 Wireless Modbus Mapping Table ........................................ 83A.7 WISE-4060 Wireless Modbus Mapping Table ........................................ 85Appendix B REST for WISE-4000 Series ..............87B.1 Introduction ............................................................................................. 88B.2 REST Resources for WISE-4000 Series................................................. 89B.2.1 Digital Input ................................................................................. 89B.2.2 Digital Output .............................................................................. 94B.2.3 Analog Input................................................................................ 99B.2.4 Data Logger .............................................................................. 105
WISE-4000 User Manual viii
Chapter 11Product Overview
WISE-4000 User Manual 21.1 IntroductionWISE-4000 series is an Ethernet-based wired or wireless IoT device, which inte-grated with IoT data acquisition, processing, and publishing functions. Except variousI/O type offering, WISE-4000 series provides data pre-scaling, data logic, and datalogger functions. These data can be access via mobile devices and be published tocloud with security in anytime and anywhere.1.2 Feature Highlights1.2.1 RESTful Web ServiceRepresentational State Transfer (REST) is a software architecture style widely usedfor creating scalable web services. With the advantage of scalability, simplicity andperformance, it's already adopted in IoT applications. It is based on Hypertext Trans-fer Protocol (HTTP) and uses verbs, like GET, POST, PUT, DELETE, etc., for webbrowsers to get web pages or retrieve data with remote servers. The data can beretrieved by internet media like HTML, XML, or JSON. REST s a uniform resourceidentifier (URI) to identify the data. Like using “http://10.0.0.1/analoginput/ch0” toidentify the analog input value of channel 0. Then the web server may retrieve aJSON file analog input value of channel 0.
3 WISE-4000 User ManualChapter 1 Product Overview1.2.2 Data Storage FunctionThe internal flash of the WISE module can log up to 10,000 data samples with a timestamp. The I/O data can be logged periodically, and when the I/O status changes.Once the memory is full, users can choose to overwrite the old data to ring log or juststop the log function. When the module is powered-off, data can be kept in the mod-ule. When restarting, users can decide whether to clear all data or continue logging.The definition of data in the IoT is not only the status of everything, but also includestime or location information. With a built-in Real Time Clock (RTC), WISE moduleslog data with a time stamp and the MAC address of the WISE module. The internalRTC can be calibrated by SNTP with time server. Once the module has been pow-ered-off, the internal time can also be saved using the time backup battery. Whenusers poll the data from the data logger, the time stamp will always be attached to thedata.1.2.3 IoT Cloud FunctionLocal storage data not only can be polled by the user, it can also be pushed to thecloud automatically. Once the logger reaches the upload criteria, Data Logger willpush the data to public cloud services like Dropbox or Baidu. This data will be savedon the cloud using a *.csv file extension. Users can synchronize the data on the cloudusing the application program provided by the cloud provider where it can beaccessed from anywhere. With the provided RESTful API, users can configure theirprivate cloud and push the data onto it. Cloud Logger provides a very flexible solutionfor cloud data storage. A WISE module is the only one stop from data acquisition tothe cloud.
WISE-4000 User Manual 41.3 Series Family and Specifications1.3.1 Series FamilyInterface Model DescriptionWLANWISE-4012E 6-ch Input/Output IoT Wireless I/O Module for IoT DevelopersWISE-4050 4-ch Digital Input and 4-ch Digital Output IoT Wireless I/O Module WISE-4060 4-ch Digital Input and 4-ch Relay Output IoT Wireless I/O Module LANWISE-4010/LAN 4-ch Current Input and 4-ch Digital Output IoT Ethernet I/O ModuleWISE-4050/LAN 4-ch Digital Input and 4-ch Digital Output IoT Ethernet I/O ModuleWISE-4060/LAN 4-ch Digital Input and 4-ch Relay Output IoT Ethernet I/O Module
5 WISE-4000 User ManualChapter 1 Product Overview1.4 Mechanical Design and Dimensions1.4.1 WISE-4000 Wireless Series Dimensions1.4.2 WISE-4000/LAN Dimensions
WISE-4000 User Manual 61.5 SwitchNote 1 After the position 1 of SW1 been changed, user need to power on the module again to apply the operation modeNote 2 SW2 in only for WISE-4050(/LAN) and WISE-4060(/LAN), all 4 channels have to be configured to dry contact or wet contact in the same time, and both P1 and P2 have to be changed together1.6 LED Definition WISE-4000 Wireless SeriesWISE-4000/LAN SeriesSwitch Description Position ON (Default) OFFSW1 Operation Mode P1 Normal Mode Initial ModeP2 N/A N/ASW2 DI Type(all channels)P1 Dry Contact Wet ContactP2 Dry Contact Wet ContactLED Color Indication BehaviorStatus Green Blink 2Hz: Wait for connection0.5Hz: Network ConnectedON 30 Sec When enable LOCATE function.Com Yellow Blink When TX/RX data in transmissionAP/Infra Green ON Limited AP ModeOFF Station ModeSignal Strength GreenON *4 Full SignalON *3 Good SignalON *2 Okay SignalON *1 Poor SignalAll OFF No Signal/ Limited AP ModeLED Color Indication BehaviorStatus Green Blink Module is normally at work. (1Hz)ON 30 Sec When enable LOCATE function.Com Yellow Blink When TX/RX data in transmissionLink Green ON Both ends of devices are connectedSpeed Yellow ON/OFF ON: 100 MbpsOFF: Less than 10 Mbps
7 WISE-4000 User ManualChapter 1 Product Overview1.7 Certification and Safety StandardWISE-4000/LAN SeriesFCC –FCC Part 15 Class A–IC ICES-003 CE–EN 55011 (Group 1, CLASS A)–EN 55022–EN 61000-6-4–EN 61000-6-2–IEC 61000-4-2–IEC 61000-4-3–IEC 61000-4-4–IEC 61000-4-5–IEC 61000-4-6–IEC 61000-4-8–IEC 61000-4-11–RoHSChina RoHSWISE-4000 Wireless SeriesFCC –FCC Part 15 Class A–IC ICES-003 CE–EN 55011 (Group 1, CLASS A)–EN 55022–EN 61000-6-4–EN 61000-6-2–IEC 61000-4-2–IEC 61000-4-3–IEC 61000-4-4–IEC 61000-4-5–IEC 61000-4-6–IEC 61000-4-8–IEC 61000-4-11–RoHSNCCSRRC China RoHS
WISE-4000 User Manual 81.8 Package Information WISE-4000 Wireless SeriesWISE-4000 Module with bundle antenna and terminal connector x1Mounting bracket x1Quick startup manual with China RoHS declareWISE-4000/LAN SeriesWISE-4000/LAN ModuleMounting bracket x1Quick startup manual with China RoHS declareWISE-4012EWISE-4012E Module with bundle antenna and terminal connector x1Quick startup manual with China RoHS declareUSB drive with WebAccess (WISE-4012E-IDK only)USB power cableExtension boardScrewdriver
Chapter 22Product Specifications
WISE-4000 User Manual 102.1 General SpecificationWLAN InterfaceStandard Conformance:–802.11b–802.11g–802.11n (2.4GHz only)Network Modes:–Limited AP (Wireless Server)–Station/Infrastructure (Wireless Client)LAN InterfaceEthernet: IEEE 802.3u 10/100Base-T(X)Connector: 1-port RJ-45GeneralI/O Connector: 3.5mm spacing, 15-pole, plug-in screw terminal blockPower Connector: Micro-B USB for WISE-4012E, other modules use same con-nector as I/OWatchdog Timer–System: 1.6 second–Communication–Programmable (FSV)RTC Accuracy: 3 min/month (WISE-4012E does not provide RTC)Enclosure: PCMounting: DIN 35 rail, wall, and stackDimensions (W x H x D)–With bundle antenna–Without bundled antenna: 80 x 89 x 25 mmOperation Temperature: –WISE-4000 Wireless Series: -25~70°C (-13~158°F)–WISE-4000/LAN Series: -40~70°C (-40~158°F)Cold Start Temperature–WISE-4000 Wireless Series: -20~70°C (-4~158°F)–WISE-4000/LAN Series: -40~70°C (-40~158°F)Storage Temperature: -40~85°C (-40~185°F)Operating Humidity: 20~ 95% RH (non-condensing)Storage Humidity: 0~95% RH (non-condensing)Note! Equipment will operate below 30% humidity. However, static electricity problems occur much more frequently at lower humidity levels. Make sure you take adequate precautions when you touch the equipment. Consider using ground straps, anti-static floor coverings, etc. if you use the equipment in low humidity environments.
11 WISE-4000 User ManualChapter 2 Product SpecificationsPowerPower Input Voltage: 10~30 VDC (24 VDC Standard)–WISE-4050–WISE-4060–WISE-4010/LAN–WISE-4050/LAN–WISE-4060/LANUSB 5VDC –WISE-4012EPower Consumption–WISE-4012E: 2.2 W @ 5 VDC–WISE-4050: 2.2 W @ 24 VDC–WISE-4060: 2.5 W @ 24 VDC–WISE-4010/LAN: 1.2 W @ 24 VDC –WISE-4050/LAN: 2.2 W @ 24 VDC –WISE-4060/LAN: 2.5 W @ 24 VDC Reverse Power Protection (not for WISE-4012E)SoftwareConfiguration Interface: Web Interface, Windows UtilityUtility: WISE-4000/Apax .NET UtilityDriver: WISE-4000 .NET Class LibraryIndustrial Protocol: Modbus/TCPSupported Protocols: TCP/IP, UDP, HTTP, HTTPS, DHCP, ARP, SNTPSupports RESTful Web API in JSON formatSupports Web Server in HTML5 with JavaScript & CSS3 Note! RTC Accuracy: 3 min/month (WISE-4012E does not provide RTC)
WISE-4000 User Manual 122.2 WISE-4010/LAN2.2.1 I/O SpecificationCurrent Input–Channel: 4–Resolution: 12-bit –Sampling Rate: 10/100 Hz/channel–Accuracy: ±0.2% of FSR @ 25°C –Input Range: 0~20 mA, 4~20 mA (Select by Web Configuration)–Input Impedance: 120 Ω–Burn-out Detection: Yes (4~20 mA only) –Supports Data Scaling and AveragingDigital Output–Channels: 4–Open collector to 30 V, 500 mA max. for resistance load–Inductive loads require an external diode to eliminate back-EMF when the DO is turned off–On Resistance (RDS(ON)): 0.7 Ω (max.) @ 500mA, 25°C–Supports 1 kHz Pulse Output –Supports High-to-Low and Low-to-High Delay Output
13 WISE-4000 User ManualChapter 2 Product Specifications2.2.2 Application WiringFigure 2.1 WISE-4010/LAN Current Input Wiring DiagramFigure 2.2 WISE-4010/LAN Digital Output Wiring Diagram
WISE-4000 User Manual 142.2.3 Pin AssignmentFigure 2.3 WISE-4010/LAN Pin Assignment2.2.4 Block DiagramFigure 2.4 WISE-4010/LAN Block Diagram2.3 WISE-4050/LAN2.3.1 I/O SpecificationDigital Input–Channel: 4–Logic level–Dry Contact 0: Open 1: Close to DI COM–Wet Contact 0: 0~3 VDC or -3~0 VDC 1: 10~30 VDC or -30~-10 VDC (3 mA min.)–All 4 channels should be configured to dry contact or wet contact in the same time–Isolation: 3,000 Vrms–Supports 32-bit Counter Input Function (Maximum signal frequency 3 kHz) –Keep/Discard Counter Value when Power-off –Supports Frequency Input Function (Maximum frequency 3 kHz)–Supports Inverted DI Status
15 WISE-4000 User ManualChapter 2 Product SpecificationsDigital Output–Channels: 4 –Open collector to 30 V, 500 mA max. for resistance load– Inductive loads require an external diode to eliminate back-EMF when the DO is turned off–Isolation: 3,000 Vrms–On Resistance (RDS(ON)): 0.7 Ω (max.) @ 500mA, 25°C–Supports 1 kHz Pulse Output –Supports High-to-Low and Low-to-High Delay Output2.3.2 Application WiringFigure 2.5 WISE-4050/LAN Digital Input Wiring DiagramFigure 2.6 WISE-4050/LAN Digital Output Wiring Diagram
WISE-4000 User Manual 162.3.3 Pin AssignmentFigure 2.7 WISE-4050/LAN Pin Assignment2.3.4 Block DiagramFigure 2.8 WISE-4050/LAN Block Diagram
17 WISE-4000 User ManualChapter 2 Product Specifications2.4 WISE-4060/LAN2.4.1 I/O SpecificationDigital Input–Channel: 4–Logic level–Dry Contact 0: Open 1: Close to DI COM–Wet Contact 0: 0~3 VDC or -3~0 VDC 1: 10~30 VDC or -30~-10 VDC (3 mA min.)–Isolation: 3,000 Vrms–Supports 32-bit Counter Input Function (Maximum signal frequency 3 kHz) –Keep/Discard Counter Value when Power-off –Supports Frequency Input Function (Maximum frequency 3 kHz) –Supports Inverted DI StatusRelay Output–Channels: 4 (Form A)–Contact Rating (Resistive Load) –250 VAC @ 5 A–30 VDC @ 3 A–Relay On Time: 10 ms–Relay Off Time: 5 ms–Insulation Resistance: 1 GΩ min. @ 500 VDC–Dielectric Strength –Between Contacts: 1000 VAC (1min)–Between Coil to Contact: 3000 VAC (1min)–Maximum Switching: 60 operations/minute–Supports Pulse Output –Supports High-to-Low and Low-to-High Delay Output
WISE-4000 User Manual 182.4.2 Application WiringFigure 2.9 WISE-4060/LAN Digital Input Wiring DiagramFigure 2.10 WISE-4060/LAN Relay Output Wiring Diagram
19 WISE-4000 User ManualChapter 2 Product Specifications2.4.3 Pin AssignmentFigure 2.11 WISE-4060/LAN Pin Assignment2.4.4 Block DiagramFigure 2.12 WISE-4060/LAN Block Diagram
WISE-4000 User Manual 202.5 WISE-4012E2.5.1 I/O SpecificationVoltage Input–Channel: 2–Resolution: 12-bit –Sampling Rate: 10 Hz (Total)–Accuracy: ±0.1 VDC–Input Range: 0~10 VDC–Input Impedance: 100 kΩ–Supports Data Scaling and AveragingDigital Input–Channel: 2–Logic level–Dry Contact 0: Open 1: Close to GND–Supports 32-bit Counter Input Function (Maximum signal frequency 3 kHz)–Keep/Discard Counter Value when Power-off –Supports Frequency Input Function (Maximum frequency 3 kHz) –Supports Inverted DI StatusRelay Output–Channels: 2 (Form A)–Contact Rating–120 VAC @ 0.5 A–30 VDC @ 1A–Relay On Time: 5 ms–Relay Off Time: 6 ms–Insulation Resistance: 1 GΩ min. @ 500 VDC–Dielectric Strength –Between Contacts: 1000 VAC (1min)–Between Coil to Contact: 1500 VAC (1min)–Maximum Switching: 60 operations/minute–Supports Pulse Output –Supports High-to-Low and Low-to-High Delay OutputNote! The analog input channels of the WISE-4012E do not support 50/60 Hz noise rejection. The following methods can help to reduce noise:Power up WISE-4012E by power bankSupply sensor power by batteryWiring V0- and V1- pin to GND pin
21 WISE-4000 User ManualChapter 2 Product SpecificationsNote! The analog input channel of the WISE-4012E does not support inverted voltage protection, note that the input voltage should within 0~10VDC
WISE-4000 User Manual 222.5.2 Application WiringFigure 2.13 WISE-4012E Voltage Input Wiring DiagramFigure 2.14 WISE-4012E Digital Input Wiring DiagramFigure 2.15 WISE-4012E Relay Output Wiring Diagram
23 WISE-4000 User ManualChapter 2 Product Specifications2.5.3 Pin AssignmentFigure 2.16 WISE-4012E Pin Assignment2.5.4 Block DiagramFigure 2.17 WISE-4012E Block Diagram
WISE-4000 User Manual 242.6 WISE-4050 2.6.1 I/O SpecificationDigital Input–Channel: 4–Logic level–Dry Contact 0: Open 1: Close to DI COM–Wet Contact 0: 0~3 VDC 1: 10~30 VDC (3 mA min.)–All 4 channels should be configured to dry contact or wet contact in the same time–Isolation: 3,000 Vrms–Supports 32-bit Counter Input Function (Maximum signal frequency 3 kHz)–Keep/Discard Counter Value when Power-off –Supports Frequency Input Function (Maximum frequency 3 kHz) –Supports Inverted DI StatusDigital Output–Channels: 4 –Open collector to 30 V, 500 mA max. for resistance load–Inductive loads require an external diode to eliminate back-EMF when the DO is turned off–Isolation: 3,000 Vrms–On Resistance (RDS(ON)): 0.7 Ω (max.) @ 500mA, 25°C–Supports 5 kHz Pulse Output –Supports High-to-Low and Low-to-High Delay Output
25 WISE-4000 User ManualChapter 2 Product Specifications2.6.2 Application WiringFigure 2.18 WISE-4050 Digital Input Wiring DiagramFigure 2.19 WISE-4050 Digital Output Wiring Diagram2.6.3 Pin AssignmentFigure 2.20 WISE-4050 Pin Assignment
WISE-4000 User Manual 262.6.4 Block DiagramFigure 2.21 WISE-4050 Block Diagram
27 WISE-4000 User ManualChapter 2 Product Specifications2.7 WISE-4060 2.7.1 I/O SpecificationDigital Input–Channel: 4–Logic level–Dry Contact 0: Open 1: Close to DI COM–Wet Contact 0: 0~3 VDC (0.8 mA max.) 1: 10~30 VDC (3 mA min.)–Isolation: 3,000 Vrms–Supports 32-bit Counter Input Function (Maximum signal frequency 3 kHz) –Keep/Discard Counter Value when Power-off –Supports Frequency Input Function (Maximum frequency 3 kHz) –Supports Inverted DI StatusRelay Output–Channels: 4 (Form A)–Contact Rating (Resistive Load) –250 VAC @ 5 A–30 VDC @ 3 A–Relay On Time: 10 ms–Relay Off Time: 5 ms–Insulation Resistance: 1 GΩ min. @ 500 VDC–Dielectric Strength –Between Contacts: 1000 VAC (1min)–Between Coil to Contact: 3000 VAC (1min)–Maximum Switching: 60 operations/minute–Supports Pulse Output –Supports High-to-Low and Low-to-High Delay Output
WISE-4000 User Manual 282.7.2 Application WiringFigure 2.22 WISE-4060 Digital Input Wiring DiagramFigure 2.23 WISE-4060 Relay Output Wiring Diagram2.7.3 Pin AssignmentFigure 2.24 WISE-4060 Pin Assignment
29 WISE-4000 User ManualChapter 2 Product Specifications2.7.4 Block DiagramFigure 2.25 WISE-4060 Block Diagram
WISE-4000 User Manual 30
Chapter 33Hardware Installation
WISE-4000 User Manual 323.1 Interface Introduction3.2 MountingWISE-4000 modules are designed as compact units and are allowed to be installedin the field site under the following methods.3.2.1 DIN-Rail MountingThe WISE-4000 module can also be fixed to the cabinet by using mounting rails. Youneed to assemble the DIN rail adapter to WISE-4000 module with flathead screwdriver as below. When the module is mounted on a rail, you may also consider usingend brackets at each end of the rail to keep the module from sliding horizontally alongthe rail.Figure 3.1 Mounting Kit Back ViewFigure 3.2 Installing the Mounting Kit for a DIN-Rail
33 WISE-4000 User ManualChapter 3 Hardware InstallationFigure 3.3 Mounting on the DIN-RailFigure 3.4 Rear View of DIN-Rail Mounting
WISE-4000 User Manual 343.2.2 Wall MountingEach WISE-4000 module is packed with a plastic wall mounting bracket. User canrefer the bracket dimension and assembling figure to configure an optimal placementin a wall, panel, or cabinet.Figure 3.5 Mounting Kit Dimensions
35 WISE-4000 User ManualChapter 3 Hardware InstallationFigure 3.6 Wall MountingFigure 3.7 Wall Mounting Finished
WISE-4000 User Manual 363.2.3 Stack MountingFigure 3.8 Stack MountingFigure 3.9 Finished Stack Mounting
37 WISE-4000 User ManualChapter 3 Hardware Installation3.3 Wiring & ConnectionsThis section introduces basic information on wiring the power supply, I/O units, andEthernet connection.3.3.1 Power Supply Wiring (Not for WISE-4012E)The system of WISE-4000 is designed for a standard industrial unregulated 24 VDCpower supply. For further application, it can also accept +10 to +30 VDC of powerinput, 200mV peak to peak of power ripple, and the immediate ripple voltage shouldbe maintained between +10 and +30 VDC.Screw terminals +Vs and -Vs are for power supply wiringFigure 3.10 Power Supply Wiring3.3.2 USB Power (WISE-4012E Only)The system of WISE-4012E IoT Developer Kit is designed for a standard Micro-BUSB 5VDC power supply. Use the provided USB power cable to power up the mod-ule. Insert the Micro-B USB end to the USB port on the side of the module, and insertanother end to Type-A 5VDC USB port such as a PC, notebook, USB power adapter,USB power bank.Note! The wires used should be at least 2 mm.Note! The wider or flared part of the USB Micro-B connector is at the front side of the module, please make sure the direction of the cable before insert-ing it into the module to prevent the damage to the USB port.Some USB power banks will automatically switch off, in this case, use a standard USB power instead.
WISE-4000 User Manual 38Figure 3.11 USB Power Supply Wiring3.3.3 I/O UnitsThe system uses a plug-in screw terminal block for the interface between I/O mod-ules and field devices. The following information must be considered when connect-ing electrical devices to I/O modules.1. The terminal block accepts wires from 0.5 mm to 2.5 mm.2. Always use a continuous length of wire. Do not combine wires.3. Use the shortest possible wire length.4. Use wire trays for routing where possible.5. Avoid running wires near high-energy wiring.6. Avoid running input wiring in close proximity to output wiring.7. Avoid creating sharp bends in the wires.
Chapter 44System Configuration
WISE-4000 User Manual 404.1 Connection1. Plug a DC power source into the +Vs, -Vs pin of WISE module to turn the power on, or plug in the USB power cable for the WISE-4012E.2. For WISE-4000/LAN Series, connect your computer to Ethernet port of WISE module with RJ-45 cross-over Ethernet cable, and configure the IP address of your computer as same IP domain as default IP address of module: 10.0.0.1. Or the wireless router can be used for configure the WISE-4000/LAN Series by mobile devices or computer with wireless adapter.3. For WISE-4000 Wireless Series, the default operation mode in normal mode is AP Mode, or you can change position 1 of SW1 to OFF as in Section 1.5, to set-ting the module as Initial Mode, then module must be AP Mode. Now the mod-ule can be searched by mobile devices or wireless adapter of computer with SSID: WISE-4xxx_MACAddress. Click the SSID to connect the module in AP Mode, WISE module will auto assign the IP address for mobile devices or com-puter.4.2 Configure WISE Using the Web Interface4.2.1 System RequirementsWISE-4000 module is developed by public HTML 5 base, but for detailed indicationand data transmission mode may be different on Web page of the operating system. For mobile devices, the minimum requirement of web browsers as below:Safari 6 in Apple iOSWeb Browser in Google Android 4.0 (Ice Cream Sandwich)Chrome in Google Android 4.0 (Ice Cream Sandwich)For PC platforms, the minimum requirement of web browsers as below: Internet Explorer (version 11) Google Chrome (version 30) Mozilla Firefox (version 25)Mobile Browse Chrome Android SafariConfiguration Y Y YFile Upload N N NData Log Chart Y Y YData Log Export N N NMobile Browse Chrome Firefox Safari IE11 IE10 IE9Configuration Y Y Y Y Y YFile Upload Y Y N Y N NData Log Chart Y Y Y Y Y NData Log Export Y Y N N N N
41 WISE-4000 User ManualChapter 4 System Configuration4.2.2 List of WISE-4000 Default Ethernet Ports 4.2.3 Factory Default SettingsWISE-4000/LAN SeriesOperation Mode: Normal ModeIP Mode: Static IP AddressDefault IP: 10.0.0.1Subnet Mask: 255.0.0.0Default Gateway: 0.0.0.0Default Connection Timeout: 720 secondHTTP Port: 80WISE-4000 Wireless SeriesOperation Mode: Normal ModeWireless Mode: AP ModeIP Mode: Static IP AddressDefault IP: 192.168.1.1Subnet Mask: 255.255.255.0Default Gateway: 192.168.1.1DHCP Server: EnabledDefault Connection Timeout: 720 secondHTTP Port: 804.2.4 Module Authorization4.2.5 Operation ModeThe operation mode can be configured by switch SW1 on the back of module. Pleaserefer to previous chapter for the detail of configuring SW1.Application Protocol Port NoteWebServer TCP 80 ConfigurableModbus Server TCP 502 -Search Engine UDP 5048 -SNTP Client UDP - RandomlyAccount Default Password Access Abilityroot 00000000 All the privilegesadmin 00000000 All the privileges except access control configurationuser 00000000 View module status only, not allow to do configurationMode WISE-4000/LAN Series WISE-4000 Wireless SeriesInitial Mode Fixed IP address: 10.0.0.1 Fixed IP address: 192.168.1.1Fixed Wi-Fi Mode: AP ModeNormal Mode Default IP address: 10.0.0.1 Default IP address: 192.168.1.1Default Wi-Fi Mode: AP Mode
WISE-4000 User Manual 424.2.6 Using a Browser to Configure the ModuleConfigure URL: http://IP_address/configDefault URL: WISE-4000/LAN Series: http://10.0.0.1/configWISE-4000 Wireless Series: http://192.168.1.1/configConfiguration StepsLogin Web Configuration Page1. Wirelessly connect your smart phone to your local Ethernet network and open the browser of your smart phone.2. Enter IP address of module with "/config", for example, the default URL: http://10.0.0.1/config or http://192.168.1.1/config3. Then you will see the login page, please enter the account and pass-word, then click Login button4. After login you will see the configura-tion web page5. Scroll down the tab, you can change the login user here6. Click the button on the top, you can switch to other pages

Navigation menu