Advanced RF Technologies ADRFTECH004 Epoch-M1C-AF, Epoch-M1C-BF & Epoch-M1C-FF 800 MHz User Manual M1C QuickStart
Advanced RF Technologies, Inc. Epoch-M1C-AF, Epoch-M1C-BF & Epoch-M1C-FF 800 MHz M1C QuickStart
Contents
- 1. Quick Start Guide
- 2. Manual
Quick Start Guide
![CHECK SIGNAL LEVELS85CHECK FOR PROPER COMMUNICATION4INSERT CD AND INSTALL SOFTWARE6SELECT OPERATING BAND(S)7MODEM SETUPDocumentation and Software can be found on the CD-ROMincluded in the M1C box.Technical SupportContact ADRF’s Technical Support Team for assistance with:-Software Questions-Setting up the M1C-M1P Operation-Troubleshooting Questions132Epoch M1C Quick Start Guidewww.adrftech.comCONNECT ANTENNAS/CABLESDONORSERVER1-323-254-81311-800-313-9345ADRFCONNECT USB CABLE AND INSTALL DRIVERSRUN SOFTWARE AND POWER ON M1CSTATUS WINDOW](https://usermanual.wiki/Advanced-RF-Technologies/ADRFTECH004.Quick-Start-Guide/User-Guide-723530-Page-1.png)
![7 8*If the M1C does not have a modem inside, proceed to step 8.Verify that the box is checked.Enter the Site ID and Manager IP informationprovided by the carrier.Click the SET button, then the “INSTALL” button.When installation is complete go to STATUS menuand verify input/output power, gains, etc.AUTO CONNECTION54 6Now run the M1C software, and plug in thepower converter.Then turn on the M1C.(AC/DC Adapter)After opening the software verify that it iscommunicating with the M1C by checkingthat the status window has loaded properlyas shown in figure 5.Go to INSTALL menu on the top of theGUI.Click on the band you want selected.SOFTWARE/POWER SOFTWARE COMMUNICATION BAND SELECTIONMODEM SETUP POST SURVEYCongratulations! The M1C has beensuccessfully installed and is ready for use.It is recommended to do a walk-throughinside of the building and make live phonecalls to verify RF coverage.132Connect the USB cable to your computer andthe M1C.When the Found New Hardware wizardcomes up, click next to automatically searchthe CD-ROM for drivers.*The installation CD must be in the CD-ROM.SOFTWARE INSTALL USB DRIVER INSTALLATIONDocumentation and Software can be found on the CD-ROMincluded in the M1C box.Technical SupportContact ADRF’s Technical Support Team for assistance with:-Software Questions-Setting up the M1C-M1C Operation-Troubleshooting QuestionsEpoch M1C Quick Start Guidewww.adrftech.com1-323-254-81311-800-313-9345Connect the donor/server antenna cables tothe M1C’s antenna ports on top as shown infigure 1.Adjust antenna positioning to assuremaximum RSSI and coverage.ANTENNA CONNECTIONPlace the installation CD into your CD-ROM.The setup will start automatically.Follow the InstallShield Wizard to completelyinstall the M1C software.When prompted, connect the USB cable andinstall the driver. (Step 3)](https://usermanual.wiki/Advanced-RF-Technologies/ADRFTECH004.Quick-Start-Guide/User-Guide-723530-Page-2.png)