Advanced Card Systems ACR1251U-C Smart Card Reader User Manual

Advanced Card Systems Limited Smart Card Reader Users Manual

Users Manual

Subject to change without prior notice info@acs.com.hk www.acs.com.hk Name Signature Date Prepared by: Kit Au 2013-03-27 Reviewed by: Approved by: ACR1251U-C User Manual V1.00 ACR1251U-C User Manual
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 2 of 13 Version History Date By Changes Version 2013-06-26 Kit Au ● First Release 1.00.00 ●
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 3 of 13 Table of Contents 1.0. Introduction ............................................................................................................. 4 2.0. Features ................................................................................................................... 5 3.0. Architecture ............................................................................................................. 5 4.0. ACR1251U-C Operating Procedur e ...................................................................... 7 4.1. Driver installation Procedure .................................................................................................. 7 4.2. Operation Example .............................................................................................................. 10 Appendix A. Parameter sheet ........................................................................................ 12
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 4 of 13 1.0. Introduction The ACR1251U-C is a dual-interface reader (IFD and PCD) that supports contact (ICC), sim size contact (SAM) and contactless (PICC) smart cards.
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 5 of 13 2.0. Features  One standard ICC landing type card acceptor.  One SAM socket  ISO 7816 Parts 1-4 Compliant for Contact Smart Card Interface.  The ACR1251U-C supports contact memory cards (refer to appendix D).  ISO 14443 Parts 1-4 Compliant for Contactless Smart Card Interface.  A built-in antenna for PICC contactless access applications.  The ACR1251U-C supports the following Tag Types: o MIFARE Classic. E.g. MIFARE 1K, 4K, MINI and Ultralight. o ISO14443-4 Type A and B. o ISO18092 FeliCa, NFC tag  T=CL emulation for MIFare 1K/4K PICCs  High Speed (424 kbps) Communication for PICCs. #Maximum 848 kbps.  Energy saving modes for turning off the antenna field whenever the PICC is inactive, or no PICC is found. It prevents the PICC from exposing to the field all the time.  User-Controllable Peripherals. E.g. LED, Buzzer.  PCSC Compliant for Contact and Contactless Interfaces.  USB V2.0 Interface. (12M bps)  Device Firmware Upgradeable through the USB Interface.
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 6 of 13 3.0. Architecture AT90SCR is for main processor for communication with PC, and control the contactless chip, communication with ICC contact card and peripherals. PN512 act as a contactless chip to perform the communication between contactless tags and AT90SCR For communication architecture, the protocol between ACR1251U-C and PC is using CCID protocol. All the communication between ICC and PICC are PCSC Compliant PICC and ICC are working exclusively, when ICC inserted, PICC will be disabled.
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 7 of 13 4.0. ACR1251U-C Operating Procedure 4.1. Driver installation Procedure Hardware requires:  ACR1251U-C  PC with OS windows XP or above Software requires:  Driver “Microsoft CCID Driver Version 5.2.3790.2724.rar” Steps: 1. Extract the file “Microsoft CCID Driver Version 5.2.3790.2724.rar” 2. Plug-in the ACR1251U-C1 to PC’s USB 3. Wait for driver install message 4. Select “Install from a list or specific location (Advanced)”, then “Next>”
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 8 of 13 5. Select “Don’t search. I will choose the driver to install”, then “Next>” 6. if present “USB Smart Card reader”, select it and then “Next>”
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 9 of 13 if No, click “Have Disk…” Click “Browse…” to locate the driver (usbccid.inf) location, click “Open” Select “USB Smart Card reader”, and then “Next>” 7. Click “Continue Anyway”
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 10 of 13 8. Wait until the below screen appear, click “Finish” to complete 9. Driver Installation Complete 4.2. Operation Example Hardware requires:  ACR1251U-C1 x 1  PC with OS windows XP or above  Test card x 1 (provided by ACS) Software requires:  APDU.exe (for example) Steps: 1. Plug in the reader into the PC 2. Place the Card on the top of the reader 3. Open “APDU.exe”
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 11 of 13 4. Select “T1”, and enter the APDU into Message Felid 5. Press “Connect” 6. Press “Transmit” to start the testing 7. Complete the operation Message Felid
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 12 of 13 Appendix A. Parameter sheet Device ACR1251U-C Smart Card Reader/Writer Power supply Supply voltage................................ Regulated 5V DC Supply current ................................ <200mA Universal Serial Bus Interface Type ............................................... USB, four lines: +5V, GND, D+ and D- Connector ...................................... supplied together with the reader Speed ............................................. Full Speed Device, 12 Mbps Contact Smart Card Interface Standard ........................................ ISO 7816 1/2/3/4, T=0 and T=1 Supply current ................................ max. 50mA Smart card voltage ......................... 5V / 3V / 1.8V Smart card read / write speed ........ 9600 – 344kbps Short circuit protection .................. +5V / GND on all pins CLK frequency ............................... 4.8 MHz Card connector............................... Landing Card insertion cycles ...................... min. 100,000 SAM Smart Card Interface Standard ........................................ ISO 7816 1/2/3, T=0 and T=1 Supply current ................................ max. 50mA Smart card voltage ......................... 5V Smart card read / write speed ........ 9600 – 344kbps Short circuit protection .................. +5V / GND on all pins CLK frequency ............................... 4.0MHz Contactless Smart Card Interface Standard ............................................. ISO 14443 A & B Parts 1-4, ISO 18092 Protocol .............................................. ISO14443 T=CL for ISO14443-4 compliant cards and T=CL Emulation for MIFARE 1K/4K Smart card read / write speed ............... 106 kbps, 212 kbps, 424 kbps Operating Frequency for Contactless Cards Access Operating Frequency ............................ 13.56 MHz Antenna Antenna Size ........................................ 64mm x 55mm Operating distance ............................... up to 50 mm (Depend on Card Type) Built-in peripherals Monotone buzzer 2x Single Color LED
ACR1251U-C User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 13 of 13 Case Dimensions .................................... 120.48 mm (L) x 71.97 mm (W) x 20.4 mm (H) Color .............................................. Black Operating Conditions Temperature................................... 0 - 50 C Humidity ......................................... 10% - 80% Cable Connector Length .................................................. 1.5m (USB) Standard/Certifications CE, FCC, VCCI, RoHS OS Windows 98, ME, 2K, XP, 7 OEM OEM-Logo possible, customer-specific colors, casing, and card connector FCC Caution:Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu