Advance Security TR35 Car Alarm Transceiver User Manual CA Elite 6 series Install rev A 4 13 09

Advance Security Inc Car Alarm Transceiver CA Elite 6 series Install rev A 4 13 09

User manual

12009 Audiovox Electronics Corporation. All rights reserved.PROFESSIONALSERIESCA 6550Owner’s GuideIMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual isapplicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/ORSAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. 2 Way LCD Vehicle Security andRemote Start System
2 2009 Audiovox Electronics Corporation. All rights reserved.Table of ContentsUsing Your Remote Control ............................................................... 3Arming the Security System ............................................................ 3Passive Arming Bypass ................................................................... 3Bypassing the Shock Sensor .......................................................... 3Hidden Alarm Function...................................................................... 3Disarming the Security System........................................................ 3Two Stage Door Unlock (optional) ................................................... 4Valet Mode ........................................................................................ 4Manually Overriding the Security System ....................................... 4Activating Trunk Release (optional) ................................................ 4Activating Optional AUX 1 (optional) ............................................... 4Using the Progressive Car Finder Feature...................................... 5Using the Personal Protection Alarm ............................................... 5Eliminating Arm / Disarm Notification Chirps .................................... 5Car Jack Mode .................................................................................. 5Using Your Remote Vehicle Starter ................................................. 6Remote Starting Your Vehicle .......................................................... 6Entering Your Vehicle while it is Running via Remote Start ........... 6Preheating or Precooling the Vehicle’s Interior ............................... 6Using the “Quick-Stop” Feature ....................................................... 6Operating the 2 / 3 Hour Start Up Timer Mode ................................ 7Turbo Timer Mode (optional) ............................................................ 7Operating the Daily Start Timer ........................................................ 8Remote Start Safety Features ......................................................... 8LED and Siren/Horn Indications ......................................................... 9Additional 2-Way LCD Remote Control Functions ...................... 10LCD Remote Control ICON’s ............................................................ 12Transmitter Button Functions ......................................................... 13Replacing Remote Control Batteries ............................................. 15Warranty Information......................................................................... 17
32009 Audiovox Electronics Corporation. All rights reserved. Arming the Security SystemTo arm the system, exit the vehicle, close all doors, then press the button. Theparking lights will flash 2 times, indicating the system is armed, has locked thedoors (if equipped and connected) and activated the starter disable feature. TheLED status indicator will blink steadily, once per second.NOTE: The system is defaulted with Silent Choice enabled, which requires asecond press of the button to activate an audible arming response from thevehicle. Passive Arming BypassIf passive arming is enabled on your system, while the system is disarmed, press + , the system will respond with 1 chirp and the LED will turn on. Thesecurity system will remain in this temporally bypassed state for as long as youwish. To exit passive bypass, press the or button and the system will returnto normal status. Bypassing The Shock SensorTo arm the system and ignore the shock sensor press button, then within 5seconds press + , the system will respond with 1 long chirp.NOTE: The system will only change the shock sensor setting for one arm cycleand will be defaulted back to normal operation the next time the system is armed. Hidden Alarm FunctionPress the button first, within 3 seconds press the button to activate thehidden alarm function. The security system will arm with “Hidden Alarm Function”in which the siren / horn will be silenced if the system is triggered. Disarming the Security SystemTo disarm the system press the button. The parking lights will flash 1 time,indicating the system is disarmed and has unlocked the doors (if equipped andconnected).NOTE: The system is defaulted with Silent Choice enabled, which requires asecond press of the button to activate an audible arming response from thevehicle.*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for morethan 2 seconds.Using Your Remote Control
4 2009 Audiovox Electronics Corporation. All rights reserved. Valet ModeTo engage valet mode:1. Turn the ignition key to the ON position.2. Press and hold the emergency override button.3. The LED will light solid indicating that the system is in valet mode.When valet mode is activated the status LED will light solid, and all security andremote start functions will be disabled.To disengage valet Mode:1. Turn the ignition key to the ON position.2. Press and release the emergency override button.3. The LED will turn off indicating that the system has exited valet mode. Two Stage Door Unlock (Optional)If this feature is enabled on your system, pressing the button one time willunlock only the driver’s door. Press again within three seconds to unlock theremaining doors. Manually Overriding the Security SystemYour system can be disarmed without the use of the transmitter. This isnecessary, since you will need the ability to operate your vehicle if the transmitteris lost or its battery fails. To by-pass the alarm system;1. Open the vehicle door. The alarm will sound.2. Turn the ignition key to the ON position.3. Within 5 seconds, press and release the valet push button switch.The alarm system will stop sounding and enter the (by-passed) mode. You cannow start and operate the vehicle normally. Activating the Trunk Release Feature (Optional)If this feature is enabled on your system, pressing and holding the button for 3seconds will open the vehicle’s trunk or hatch. Activating Optional AUX 1 (Optional)If this feature is enabled on your system, pressing the and buttonssimultaneously will activate an optional feature. This feature can be programmedfor a wide range of functions like power window or sunroof automation, pleaseconsult your installing dealer to determine the functionality of your system.
52009 Audiovox Electronics Corporation. All rights reserved. Using the Progressive Car Finder FeaturePress the button to locate your vehicle. The system will sound 5 times at lowvolume, increasing in volume each time the button is pressed. Using the Personal Protection Alarm (Panic)Press and hold the button for 3 seconds to activate the personal protectionalarm. During panic mode, the normal function of the transmitter buttons will besuspended. The transmitter’s and buttons can be used to lock and unlock thedoor (if the option is installed). To stop the alarm, press and hold the button onthe transmitter again for 3 seconds. The system will automatically stop after 30seconds. Eliminating Arm / Disarm Notification ChirpsSystem ARM/DISARM chirps can be toggled ON or OFF without entering theprogramming feature banks.1. Turn the ignition ON then OFF.2. Press and release the valet/programming button 3 times. The system willrespond with 1 chirp for ON or 2 chirps for OFF. Car Jack ModeThis feature must be turned on in system programming, please consult yourinstalling dealer.Car Jack mode ON: Turn the ignition ON, Car Jack mode is automatically entered.TRIGGERING Car Jack mode: Car Jack mode will be triggered when a door isopened then closed. When Car Jack mode is on, the system will act as follows;1. 50 seconds after being triggered the siren will chirp for 15 seconds,durring this 15 seconds you will be alerted to push the valet button to turnoff Car Jack mode. If Car Jack mode is not turned off at this time it willadvance to the next step.2. Following the 15 second chirps (total time now 65 seconds) the sirenwill go into full sound and the parking lights will start flashing.3. 90 seconds after trigger in, addition to the siren and parking lights, thesystem will activate the starter kill. THE SYSTEM WILL REMAIN IN THISSTATE UNTIL THE BATTERY IS DEPLETED.OVERRIDE THE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFFthen On and press the valet button within 10 seconds. NOTE: If you have activatedthe password pin code you will need to use your pin code to override Car Jackmode. (see your dealer about the password pin code feature).
6 2009 Audiovox Electronics Corporation. All rights reserved. Preheating or Precooling the Vehicle’s interiorBefore exiting the vehicle, set the temperature controls to the desired setting andoperation. After the system starts the vehicle, the heater or air conditioner willactivate and heat or cool the vehicle’s interior to your setting. Using the “Quick-stop” FeatureIf you want to make a short stop and keep your vehicle running (to keep theinterior warm or cool), the quick-stop feature allows you to do this while keepingyour vehicle secure and your keys with you.To engage quick stop:1. Stop the vehicle and place the transmission in PARK.2. With your foot off the brake pedal, press and release the button 2times within 2 seconds. The LED will flash 3 times to confirm quick stop isentered.3. Remove the keys from the ignition and exit the vehicle. Press thebutton to lock the vehicle’s doors if desired.Note: Do not leave children or animals unattended in the vehicle when using thequick-stop feature.Using Your Remote Vehicle Starter Remote Starting Your VehicleTo activate the remote vehicle start function, press and release the button 2times within 2 seconds. The system will sound, the parking lights will flash 1 timeand the system will check the vehicle to ensure it is safe to start. If all safetyparameters are correct, the vehicle will start within 5 seconds. The vehicle’sparking lights will turn on (or flash depending on system settings) as a visualindication that the vehicle has started and is running. Press and hold the buttonfor 3 seconds to turn the vehicle off.If your vehicle stalls or does not start, the system will pause 5 seconds, then try 2more times to start the vehicle (a total of 3 attempts). The system will pause 5seconds between each start attempt. If the vehicle does not start after the 3rdattempt, the system will abort the remote vehicle start process. Entering the Vehicle while it is Running via Remote Vehicle Start1. Unlock the vehicle’s doors.2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!3. Insert the key into the ignition switch and turn to the ON or RUN position.4. Press the brake pedal. The remote vehicle starter will disengage and thevehicle will operate normally.
72009 Audiovox Electronics Corporation. All rights reserved. Operating the 2 / 3 Hour Start Up Timer ModeThe system has the ability to start the vehicle every 2 or 3 hours for a 48 hourperiod. This feature is especially useful in cold climates where the only means tokeep the engine and engine fluids warm is to periodically start the engine. Thedefault setting is 3 hour, Selection between 2 or 3 hour is made in optionprogramming.WARNING!Be certain that the vehicle is outdoors before using this or any remote startingdevice. A running engine produces dangerous carbon monoxide fumes which canbe harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicleif it is garaged.To begin the 2 / 3 hour start up timer mode:1. Turn the vehicle’s ignition ON then OFF.2. Press and hold the valet button.3. Press the button 4 times, the system will chirp 2 times and flash theparking lights 4 times.4. Release the valet button.To exit the 2 / 3 hour start up timer mode:1. Turn the vehicle’s Ignition ON.OR1. Activate the remote vehicle start feature using the remote control. Turbo TimerThis option will keep the engine running to allow the vehicle’s turbo to properly cooldown before shutting the engine off.To engage the Turbo Timer feature:1. With the vehicle running via the ignition key and your foot off of thebrake pedal.2. Engage the vehicle’s parking brake and press the and buttons simultaneously.3. The vehicle’s parking lights will turn on to verify the Turbo Timerfeature has been activated.4. Turn the ignition key OFF, the vehicle will continue to run until the pre-programmed time has elapsed (1, 3, or 5 minutes)To disengage the turbo timer feature, press the vehicle’s brake pedal.
8 2009 Audiovox Electronics Corporation. All rights reserved. Remote Start Safety FeaturesFor safety and security reasons, the system will shutdown or prevent the remotevehicle starter from activating if any of the following occur:1. The vehicle hood is open.2. The brake pedal is pressed prior to turning the ignition key to the ONposition.3. The engine is over-reved (tach checking only).4. Valet mode is active. Operating the Daily Start TimerThe system has the ability to start your vehicle based on a 24-hour countdowntimer. This feature requires a two-part activation sequence. From the remote,pressing both the & buttons together will activate the 24 hour countdowntimer (the vehicle will start 24 hours from this time). Next, When you are finishedoperating the vehicle for the day, perform the following steps to complete theprocess.1. Turn the ignition ON/OFF (vehicle must be disarmed).2. Within 10 seconds, while pressing the brake, press and release the button twice.3. The vehicle will emit 2 chirps.
92009 Audiovox Electronics Corporation. All rights reserved.LED and Siren/Horn Indications LED Display IndicationsLED FunctionOFF DISARMEDSLOW FLASH ARMEDFAST FLASH PASSIVE ARMINGON (SOLID) VALET MODE2 FLASH... PAUSE ZONE 2 TRIGGER, HOOD/TRUNK3 FLASH... PAUSE ZONE 3 TRIGGER, DOOR4 FLASH... PAUSE ZONE 4 TRIGGER, SHOCK5 FLASH... PAUSE ZONE 5 TRIGGER, IGNITION Siren/Horn IndicationsChirps Function1 DISARM2 ARM3 DOOR AJAR UPON ARMING4 DISARM / TRIGGERED5 CAR LOCATOR Parking Light Flash IndicationsFlashes Function1 DISARM2 ARM3 DISARM / TRIGGERED5 CAR LOCATORON (SOLID) REMOTE STARTED
10 2009 Audiovox Electronics Corporation. All rights reserved. Check Vehicle StatusPress and release then press the within 3 seconds, the transmitter willrespond with one melody sound and display the current status of the vehicle. Display IlluminationPress and release the button. The display will illuminate for 5 seconds. Melody / Vibration ModeTo have the remote control vibrate or play a melody tone each time it receives aresponse from the vehicle press and release then press and hold for 2seconds. Button BeepsTo toggle button beeps on or off press and release then press and hold for 2seconds. Page Call OutWith the ignition OFF, press the valet programming button for two seconds, thevehicle will chirp one time and the 2-way transmitter will play the paging melodyand display the call icon. Battery Save ModeWhile in POWER SAVE MODE the 2-way LCD transmitter will NOT look for anyincoming signals from the main unit until a button is pressed. The LCD screen willdisplay SAVE to indicate that power save mode is ON. To enter power save modepress and hold for 5 seconds. Clear Flashing Icons and Melody SoundPress the button 3 times within 3 seconds. This will clear the melody sound andflashing icons on the LCD screen. Stopping LCD Trigger MelodyTo stop the alarm trigger melody if the system has been triggered WITHOUTdisarming the system, press any button one time only, this will not send acommand to the vehicle at this time and the alarm will continue to sound.Additional 2-Way LCD Remote Control Functions
112009 Audiovox Electronics Corporation. All rights reserved. Button LockPress and release then press hold the for 2 seconds to toggle the button lockon or off. IlluminationPress and release 2 times then press and hold for 2 seconds to toggleillumination on or off. When on, the display will illuminate when it receives orsends a command. 2 Car ModeTo control a second security system enter 2 car mode by pressing then press and together for 3 seconds. When the icon appears on the transmitter’s LCDscreen it will control the second security system. Use the same method to exit 2car mode and resume control of the original vehicle’s security system.NOTE: A second security system must be installed and the LCD transmitter must belearned to it before this feature will operate the additional system. Parking Meter CountdownThe parking meter countdown timer has 6 preset times, to access the preset timesand begin countdown press and release then press and hold for 2 seconds,repeating this step to increase the countdown time. Adjusting the Clock and Timer SettingsThe clock, alarm clock and programmable countdown timer are accessed throughthe Function Menu. Press and hold for 3 seconds to access the function menu,once you have accessed the feature menu press and release to scroll througheach feature and follow the steps below to adjust the settings for each. Press andhold for 2 seconds to exit the menu.Clock Hour Press to increase or to decreaseClock Minute Press to increase or to decreaseAlarm Clock Hour Press to increase or to decreaseAlarm Clock Minute Press to increase or to decreaseAlarm Clock ON / OFF Press to turn ON or to turn OFFCountdown Timer Hour Press to increase or to decreaseCountdown Timer Minute Press to increase or to decreaseCountdown Timer ON / OFF Press to turn ON or to turn OFF
12 2009 Audiovox Electronics Corporation. All rights reserved.LOCK UNLOCKSYSTEM ARMED VALET MODETRANSMITTINGTRUNK TRIGGER DOOR TRIGGERFULL SHOCK TRIGGERIGNITION ON/TRIGGERENGINE RUNNINGCELSIUS / FAHRENHEIT2 CAR MODEBATTERY INDICATOR BATTERY SAVE MODEVIBRATE/SILENT MODEHOOD TRIGGERCHIRPS ON/OFFPAGE FROM VEHICLECAR JACK MODETIME COUNT DOWNMELODY MODETIME DISPLAYTIMER START MODESALARM CLOCKLCD Remote Control ICON’s
132009 Audiovox Electronics Corporation. All rights reserved.Transmitter Button Functions
14 2009 Audiovox Electronics Corporation. All rights reserved.
152009 Audiovox Electronics Corporation. All rights reserved.Replacing Remote Control Batteries 1-Way 4 Button Remote Control:The batteries (model CR2016) inside each remote control should last approximately 1year under normal use. When the batteries become weak you will notice the remotecontrol range (the distance from the vehicle the remote control will work) deteriorateand the small LED on the remote control will dim. To replace the remote controlbatteries:1. Remove 3 screws and disassemble the halves of the remote control.2. Remove the old batteries, observing the +/- symbols on the batteries andreplace with new CR2016 batteries.3. Reassemble the halves of the remote control and install the 3 screws.4. Test operation of the remote control. 2-way LCD Remote Control:The CR2450 battery inside the 2-way LCD remote control should last approximately 6months under normal use. When the batteries become weak you will notice theremote control range (the distance from the vehicle the remote control will work)deteriorate and the BATTERY icon on the LCD remote control will show.1. Gently slide the battery cover off of the remote control.2. Remove the old CR2450 battery, observing the +/- symbols on the battery, andreplace with a new CR2450 battery.3. Gently slide the battery cover on to the back of the remote control.4. Test operation of the remote control.
16 2009 Audiovox Electronics Corporation. All rights reserved.
172009 Audiovox Electronics Corporation. All rights reserved.Code Systems, Inc. Limited Lifetime WarrantyCode Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODEvehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except asprovided below) should this Product under normal use and conditions, be proven defective inmaterial or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGI-NALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge forparts directly related to repairs of the defect(s).Switches, indicator lights, and transmitter cases are similarly warranted to the originalpurchaser for a period of one (1) year from the date of purchase of the Product.CODE accessories, sold separately, are covered by the applicable warranty accompa-nying the accessory.This warranty is non-transferable, non-assignable and is voided when: (1) the Product isremoved from the vehicle in which it was originally installed; or (2) the vehicle in which the Productwas originally installed is transferred to another party.This warranty does not apply to any product damaged by accident, physical or electricalabuse, improper installation, alteration, or use contrary to its intended function, fire, flood, or othernatural acts.In order for the Product to be repaired or replaced under the terms of this warranty, thedefective Product must be returned to an authorized CODE dealer and accompanied by a copy ofthe retail sales receipt. The date of purchase and year, make and model of the vehicle in which theProduct was originally installed must be clearly indicated on the sales receipt.This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSEDOR IMPLIED. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MER-CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THEDURATION OF THIS WRITTEN WARRANTY. IN NO CASE SHALL CODE BE LIABLE FOR ANYCONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WAR-RANTY, EXPRESS OR IMPLIED, WHATSOEVER.CODE does not warrant that the Product cannot be compromised or circumvented. THE EXTENT OFCODE’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENTPROVIDED ABOVE AND, IN NO EVENT SHALL CODE’S LIABILITY EXCEED THE PURCHASEPRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLATIONLABOR.Some states do not allow the exclusion or limitation of incidental or consequentialdamages, so the above limitation may not apply to you. This warranty gives you specific legalrights and you may also have other rights which vary from state to state
18 2009 Audiovox Electronics Corporation. All rights reserved.Audiovox Electronics Corporation.Customer Service 1-800-421-3209WWW.CODE-ALARM.COMFCC COMPLIANCEThis device complies with Part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including any interferencethat may cause undesired operation.Warning!Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.

Navigation menu