Advance Security T23 Car Alarm Transmitter User Manual 6945RBUM

Advance Security Inc Car Alarm Transmitter 6945RBUM

User Manual

OWNER’SMANUALModel: SLRF8Vehicle Immobilizer This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference; and(2) This device must accept any interference received, including interference that may cause undesired operation.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications tothis equipment. Such modifications could void the user’s authority to operate the equipment.4900UM 3/2/04 12:59 PM Page 1
Welcome to the world of Silencer®automotive security. Silencer automotive security products havebeen designed to provide the consumer with a product that is technologically superior, providingyears of trouble free operation.This manual will provide reference for the operation and maintenance of your new Silencer vehicleimmobilizer system. This system is an automatic device that will become armed every time you leave your vehicle. Oncearmed, the Silencer vehicle immobilizer will prevent your vehicle's engine from operating, aiding in theprevention of vehicle theft. Take a moment to read this manual so you will be familiar with the operation of your new system.Passive ArmingOnce you have turned the ignition key to the "Off" position, the Silencer engine immobilizer willbecome armed in 30 seconds. Upon arming, the device will emit 1 chirp sound to indicate it’s"Armed". If you turn the ignition key back on before the 30 seconds has elapsed, the system will resetand wait for the ignition key to be turned to the "Off" position again. Note: This passive arming feature could qualify in some states for an insurance discount. Check withyour insurance agency.When you return to your vehicle to start the engine, press the “Disarm” button on the 3-buttontransmitter. When the system is disarmed, the device will emit 2 chirps to indicate it’s "Disarmed". Manual Disarm – 3-Button TransmitterManual Disarm – 1-Button TransmitterWhen you return to your vehicle to start the engine, press the button on the transmitter. When thesystem is disarmed, the device will emit 2 chirps to indicate it’s "Disarmed". Disarm Valet OnValet Off3-Button Transmitter 1-Button Transmitter24900UM 3/2/04 12:59 PM Page 2
Each time the system is disarmed using the transmitter, the device will begin a protection modecountdown. This is a timed secondary protection mode to insure the RF signal that disarmed thesystem came from your transmitter. If you do not start your vehicle within the 60 second timercountdown, your Silencer system will become rearmed and your engine will be disabled. RF Protection ModeEmergency OverrideThere may come a time when it will be necessary to manually disarm your Silencer system withoutusing your transmitter. This condition occurs if the battery in your transmitter is low, dead or if yourtransmitter becomes damaged or lost. In these circumstances, it will be necessary to use your ignitionkey to perform an emergency override procedure to get your vehicle operational. Follow this procedureto manually override your system: 1. Turn on the ignition key for 10 seconds then turn it off. 2. Wait for 10 seconds. 3. Turn on the ignition key for 10 seconds then turn it off. 4. Wait for 10 seconds5. Turn on the ignition key and the vehicle will start. The only maintenance that your Silencer engine immobilizer requires is a periodic check to insure thatall operations are functioning normally. This is also good practice for you to refresh your memory on“Emergency Override” and “Valet Mode” procedures. System MaintenanceThe batteries supplied with yourremote controls should last over 1 year. Heavy transmitter usage willshorten battery life. Reduced transmitter range is usually a indication that the batteries are becomingweak and should be replaced. Transmitters that are not in use should have the batteries removed.Batteries(Only applies if you have a 3-button transmitter)The valet mode allows you to temporarily turn off the passive arming function, eliminating the need togive your transmitter to a parking attendant or garage mechanic. To enter the valet mode, follow this procedure: 1. Press the disarm button on your transmitter to insure the device is disarmed (you will hear 2beeps from the device). 2. Within 3 seconds of pressing the disarm button, press and release the “Valet On” button 3 timesslowly. The device will emit 3 long beeps to indicate the valet mode "On" condition. To exit the valet mode, follow this procedure: 1. Press the "Disarm" button on your transmitter (you will not hear any sound). 2. Within 3 seconds of pressing the disarm button, press and release the “Valet Off” button 3 timesslowly. The device will emit 1 long beep to indicate the valet mode is "Off". Valet Mode34900UM 3/2/04 12:59 PM Page 3
3 Year WarrantyYour new Silencer®Security Systems is warranted to be free of defects for 3 years. Silencer®or itsauthorized agents will within 3 years from the date of sale to you, repair or replace said product orany part thereof, at the option of the Silencer®or its authorized agents, if said product or part isfound defective in materials or workmanship, when properly connected and operating on the correctpower requirements designated for the specific product. This warranty and Silencer®or itsauthorized agents obligations hereunder do not apply where the product was; damaged while in thepossession of the consumer, subjected to unreasonable or unintended use, not reasonablymaintained, or serviced by anyone other than Silencer®or its authorized agents, or where thewarning seal on the product is broken or the power and/or plugs are detached from the unit. Thiswarranty does not cover the cabinet appearance items or accessories used in connection with thisproduct, or any damage to the products resulting from improper installation, alteration, accident,misuse, abuse or acts of nature. Silencer®OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLETO ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSEACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN EXCEPTTHOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND 3 YEARS FROMTHE DATE OF SALE. Some states do not allow limitations on how long an implied warranty lasts, andsome states do not allow the exclusion or limitation of incidental or consequential damages, so theabove limitations or exclusion may not apply to you. This warranty gives you specific legal rights,and you may have other rights that vary from state to state. Defective merchandise should bereturned to the original point of purchase or secondly, to 1111 W. Victoria Street, Compton CA90220. Return Authorization must be obtained before sending, or merchandise may be refused. Allclaims concerning your Silencer®Security System should be referred to your selling dealer. If youare away from the vicinity of the selling dealer please call (800) 340-3200.© 2004 Copyright Magnadyne Corp.To replace (or remove for storage) the batteries in your transmitter, follow this procedure: 1. Turn the transmitter over and locate the slot at the edge of the transmitter case. 2. Use a small flathead screwdriver to pry apart the top and bottom case of the transmitter whilekeeping the button side facing downward. 3. Once the back is completely removed, press on the button face to remove the entire transmitterassembly from the case. 4. Separate the transmitter circuit board from the rubber button case and slide the old battery outof it’s holder. 5. Replace the battery in reverse sequence observing the correct polarity of the battery (+ batteryside should be facing upward). 6. The 3 volt battery for this transmitter is model CR2032. This battery is very common and can befound in most convenience stores and camera shops.Battery Replacement4900UM3-2-04 Rev. B4900UM 3/2/04 12:59 PM Page 4

Navigation menu