Advance Security T11 User Manual

Advance Security Inc Users Manual

Users Manual

6906FOUR-BUTTON TRANSMITTERThe 6906 transmitter is a replacement RF transmitter. The transmitter comes with 4push-button switches.1). Press LOCK push-button switch on control first receiver (Your alarm system).2). Press UNLOCK push-button switch to control second receiver (It can be an alarmsystem or electric device).3). Press TRUNK push-button switch to control third receiver (It can be an alarmsystem or electric device).4). Press PANIC push-button switch to control fourth receiver (It can be an alarmsystem or electric device).Unique optional passive/active transmitter :This is a passive/active transmitter that allows you to control the alarm or electricdevice passively or actively. Slide the passive switch ton ‘ON’ position on the frontcase for passive operation.TRANSMITTER BATTERY REPLACEMENTIf the range of your transmitter deteriorate, it is possible that you need to replace thebattery.1). Release the screw from the back of transmitter and move upper transmitter case.2). Remove old battery from transmitter.3). Install a new battery (12 volt) noting the (+) and (-) marks in the battery area of thetransmitter.4). Replace upper transmitter case with area, don’t damage the inside components.5). Tighten the screw on the back of transmitter.This device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions.(1) This device may not cause harmful interference, and(2) This device must accept any interference receiver, including interference that maycause undesired operation.

Navigation menu