Advance Bright BTS800 Clearholic User Manual BTS800 IM OP

Advance Bright Limited Clearholic BTS800 IM OP

User Manual

Included In This PackageClearholic SpeakerMicro USB Cable3.5mm Aux CableUser ManualOverviewTroubleshootingLED IndicatorsIndicator StatusRED ChargingGREEN Fully ChargedBT Flashing BLUE Pairing Mode[Pair with single Clearholic BTS800] BLUE ConnectedClearholic BTS800Bluetooth SpeakersUser ManualFront view Back viewL / R Pairing ButtonLED IndicatorMicro USB Power InputLine-inPower ButtonIndicator StatusBT [Pair with 2 Clearholic BTS800] Volume ControlAfter Paired with the Smartphone devicePress L each time to volume DOWNPress R each time to volume UPDO NOT HOLD THE L/R BUTTON FOR VOLUME UP/DOWN, BECAUSE IT WILL ENTER TO THE SEARCHING MODE FOR STEREO FUNCTIONHow to Charge Clearholic BTS8001.Plug the Clearholic BTS800 into your computer or USB compatible wall charger via the included Micro USB Cable.2.When the Clearholic BTS800 is fully charged, disconnect the cable.Note: Approximately 3 – 4 hours required for full Press “L” on one BTS800 and press “R” on the other one BTS800, ashing red LED to represent linking up with another BTS800 SpeakerPaired between 2 BTS800 and ready for pair with the music deviceConnected and can play for stereo modeFlashing RED RED on one BTS800 and Flashing BLUE on the other BTS800RED on one BTS800 and BLUE on the other BTS800charge. Battery will last up to 6 hours of continuous playback.Getting Connected for Bluetooth Pairing1. Press the power button for three seconds to turn on the speaker. The BT LED indicator blinks blue and the speaker is discoverable and ready for pairing.2. On your Bluetooth music device, turn on Bluetooth and scan for devices in its Bluetooth menu.3. When the “Ye!! – BTS800” appears on the device list of your device, select “Ye!! – BTS800”. The BT LED indicator turns solid blue after pairing is established. The speaker is now ready to play music.Power ButtonStereo Pairing Setup ***An additional Clearholic BTS800 speaker is required***The Clearholic BTS800 speaker is equipped with Stereo Pairing feature. To connect two Clearholic speakers together with a true left / right stereo signal:1. Press the power button on both BTS800 for three seconds to turn on the speakers. The BT LED indicators blink red.2. Press the “L” pairing button from one Clearholic speaker and “R” pairing button on the other set of speaker for three seconds at the same time.3. The BT LED indicator on one speaker turns solid red once the speakers linked up with each other and the other speaker keeps blink blue.4. On your Bluetooth music device, turn on Bluetooth and scan for devices in its Bluetooth menu.5. When the “Ye!! – BTS800” appears on the device list of your device, select “Ye!! – BTS800”. The BT LED indicator turns solid blue after pairing is established. The speakers are now ready to play music in stereo mode.Reconnecting Bluetooth DeviceKeep in mind that the Bluetooth Speaker has a 33 feet range in open eld. If you move out of range or turn o the Bluetooth feature on your Bluetooth device, the Bluetooth Speaker will disconnect from your device. To reconnect, simply follow the instruction in the “Getting Connected” section.Changing Connected Bluetooth Device1. Disable the Bluetooth function of your Bluetooth device.2. The Bluetooth Speaker can now be connected to the dierent Bluetooth device.3. Following the instructions in the “Getting Connected” sectionPlay Audio from Non-Bluetooth DeviceTurn on the speaker, connect the Bluetooth Speaker and your non-Bluetooth audio device via the included 3.5 mm Aux cable. The speaker is ready to play music.SpecicationsModel No.: BTS800Output Power: 3W + 5WInput Voltage: DC 5V / 1ACharge Time: 3 - 4 hoursInput: Wireless Bluetooth & 3.5mm wired auxiliaryPlayback Time: Up to 6 hours on BluetoothBluetooth Version: Bluetooth 3.0 with EDROperating Distance: Up to 33 feet (10 metres)Dimensions: 175 x 90 x 75 mmWeight: 460 gramsTroubleshootingNo connection between Bluetooth Speaker and your Bluetooth device.• Make sure the Bluetooth Speaker is fully charged• Make sure the press and hold the power button to activate the pairing mode.• Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution prole.• Make sure the Bluetooth Speaker is within range of your Bluetooth device.Audio is not coming out from the Bluetooth Speaker after Bluetooth device successfully paired.• Make sure the Bluetooth device volume is set to a comfortable listening level.Audio is not coming out from the Bluetooth Speaker after the non-Bluetooth device connected with the 3.5 mm Aux cable.• Make sure the 3.5 mm Aux cable is correctly and rmly connected to the Bluetooth Speaker and non-Bluetooth device.• Make sure the non-Bluetooth device is set to a comfortable listening level.Precautions1. The radio waves emitted by the Bluetooth Speaker and Bluetooth device can aect operation of nearby electronics including medical devices.2. Keep the unit in a cool, dry place.For more information, please visit www.yelltowin.comDesigned by Ye!! in Hong KongAssembled in China240mm (W) x 115mm (H)Computer(not included)USB CompatibleWall charger(not included)orCMYCMMYCYCMYK
Stereo Pairing Setup ***An additional Clearholic BTS800 speaker is required***The Clearholic BTS800 speaker is equipped with Stereo Pairing feature. To connect two Clearholic speakers together with a true left / right stereo signal:1. Press the power button on both BTS800 for three seconds to turn on the speakers. The BT LED indicators blink red.2. Press the “L” pairing button from one Clearholic speaker and “R” pairing button on the other set of speaker for three seconds at the same time.3. The BT LED indicator on one speaker turns solid red once the speakers linked up with each other and the other speaker keeps blink blue.4. On your Bluetooth music device, turn on Bluetooth and scan for devices in its Bluetooth menu.5. When the “Ye!! – BTS800” appears on the device list of your device, select “Ye!! – BTS800”. The BT LED indicator turns solid blue after pairing is established. The speakers are now ready to play music in stereo mode.Reconnecting Bluetooth DeviceKeep in mind that the Bluetooth Speaker has a Bluetooth device, the Bluetooth Speaker will disconnect from your device. To reconnect, simply follow the instruction in the “Getting Connected” section.Changing Connected Bluetooth Device1. Disable the Bluetooth function of your Bluetooth device.2. The Bluetooth Speaker can now be 3. Following the instructions in the “Getting Connected” sectionPlay Audio from Non-Bluetooth DeviceTurn on the speaker, connect the Bluetooth Speaker and your non-Bluetooth audio device via the included 3.5 mm Aux cable. The speaker is ready to play music.Model No.: BTS800Output Power: 3W + 5WInput Voltage: DC 5V / 1ACharge Time: 3 - 4 hoursInput: Wireless Bluetooth & 3.5mm wired auxiliaryPlayback Time: Up to 6 hours on BluetoothBluetooth Version: Bluetooth 3.0 with EDROperating Distance: Up to 33 feet (10 metres)Dimensions: 175 x 90 x 75 mmWeight: 460 gramsTroubleshootingNo connection between Bluetooth Speaker and your Bluetooth device.• Make sure the Bluetooth Speaker is fully charged• Make sure the press and hold the power button to activate the pairing mode.• Make sure your Bluetooth device is available and supports Bluetooth Advance Audio • Make sure the Bluetooth Speaker is within range of your Bluetooth device.Audio is not coming out from the Bluetooth Speaker after Bluetooth device successfully paired.• Make sure the Bluetooth device volume is set to a comfortable listening level.Audio is not coming out from the Bluetooth Speaker after the non-Bluetooth device connected with the 3.5 mm Aux cable.• Make sure the 3.5 mm Aux cable is correctly Speaker and non-Bluetooth device.• Make sure the non-Bluetooth device is set to a comfortable listening level.Precautions1. The radio waves emitted by the Bluetooth operation of nearby electronics including medical devices.2. Keep the unit in a cool, dry place.For more information, please visit www.yelltowin.comDesigned by Ye!! in Hong KongAssembled in ChinaLine in`jv`jjv`v`jvh811-BTS800-00-W
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment.This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Navigation menu