Advance Bright BTS700 BLUETOOTH PORTABLE SPEAKER User Manual BPS700 IM OP

Advance Bright Limited BLUETOOTH PORTABLE SPEAKER BPS700 IM OP

User Manual

BTS700available and supports BluetoothtMake sure the Bluetooth Speaker is within range of your Bluetooth device.Audio is not coming out from the Bluetooth Speaker after Bluetooth devicesuccessfully paired.tMake sure the Bluetooth device volumeis set to a comfortable listening level.Audio is not coming out from the Bluetooth Speaker after the non-Bluetooth device connected with the Micro USB to USB and 3.5 mm splittercable.tMake sure the Micro USB to USB and 3.5 the Bluetooth Speaker and non-Bluetooth device.tMake sure the non-Bluetooth device is set to a comfortable listening level.tAudio is coming out with abnormalnoise and sound quality. Try to change up the battery of Bluetooth speaker.Precautions1. The radio waves emitted by the Bluetooth Speaker and Bluetoothelectronics including medical devices.2. Keep the unit in a cool, dry place.For more information, please visit www.yelltowin.comDesigned by Ye!! in Hong KongAssembled in ChinaPackage Contents- BTS700 Portable Bluetooth Speaker- Micro USB to USB and 3.5 mm splitter cable- User ManualOverviewLED IndicatorsIndicator StatusRED ChargingGREEN Fully ChargedAUX/ Flashing Pairing ModeBT BLUE BLUE Connected / AUX IN ModeHow to Charge BTS7001. Plug micro USB Tip from the included cable to the micro USB slot fromBTS700.2. Plug USB Tip from the included cable toUSB compatible wall charger with 0.5A current output(DC 5V, 500mA).3. When the BTS700 is fully charged,disconnect the USB Cable.Note: Approximately 1-2 hours requiredfor full charge. Battery will last up to 6 hours when connected wirelessly and up to 10 hours when connectedthrough Line-in.Play Audio from Bluetooth Device1. Switch the Bluetooth Speaker to the BT mode. The speaker is discoverableand ready for pairing. The statusindicator blinds blue.2. On your Bluetooth device, turn on Bluetooth and scan for devices in its Bluetooth menu.3. When the “Ye!!-BTS” appears on the device list of your Bluetooth device,select “Ye!!-BTS”. (If a pass code is requested, enter 1234.) The statusindicator turns solid blue after pairingis established. The speaker is ready toplay music.Example: iPad / iPhone / iPod TouchPress Settings > General > Bluetooth > Bluetooth ON > Ye!!-BTS > Enter PIN: 1234 > PairExample: Android 4.03 Ice CreamSandwich SmartphonePress Settings > Bluetooth ON > Scan > Ye!!-BTS > Enter PIN: 1234 > Settings > Check the Media audio boxReconnecting Bluetooth DeviceKeep in mind that the Bluetooth Speaker Bluetooth feature on your Bluetoothdevice, the Bluetooth Speaker will disconnect from your device. Toreconnect, simply follow the instructionin the “Play Audio from Bluetooth Device”section.Changing Connected Bluetooth Device1. Disable the Bluetooth function of yourBluetooth device.2. The Bluetooth Speaker can now be device.3. Following the instructions in the “PlayAudio from Bluetooth Device” sectionPlay Audio from Non-Bluetooth Device1. Switch the Bluetooth Speaker to the AUX IN mode. The status indicator turnssolid blue.2. Connect the Bluetooth Speaker and your non-Bluetooth audio device with the included Micro USB to USB and 3.5 mm splitter cable. The speaker is readyto play music.Model No. BTS700 Ye!!-BTSOutput Power 3WPower Capacity 1,000 mAhInput Voltage DC 5V / 1ACharge Time 1 – 2 hoursPlayback Time Up to 6 hours on Bluetooth Up to 10 hours on Line-inOperating Distance up to 33 feet (10 metres)Bluetooth Version Bluetooth 3.0 with EDRDimensions 61 x 61 x 54 mmNet Weight 133 gTroubleshootingNo connection between BluetoothSpeaker and your Bluetooth device.tMake sure the Bluetooth Speaker is fully chargedtMake sure the BT mode is switched on.tMake sure your Bluetooth device is Bluetooth Portable SpeakerLEDIndicatorsFront View Back ViewMicro USBPower Input / Line-inSlide switchAUX IN mode;BT mode]Computer(not included)USB CompatibleWall charger(not included)orCMYCMMYCYCMYKBPS700 IM OP.pdf 1 9/11/2012 11:53:16811-BTS700-00-W
FCC NOTE：This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND CHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES. IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi dential installation. This equipment generates, uses and can radiate radio frequenc y energy and, if not installed and used in accordance with the in structions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular insta llation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to corr ect the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experien ced radio/TV technician for help. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Navigation menu