Adaptrum ACRS2F-B1 Fixed TV Band Device User Manual Client

Adaptrum, Inc Fixed TV Band Device Users Manual Client

Contents

Users Manual Client

Initial Client SetupFCC / OFCOM / International© 2017 Adaptrum, Inc.QUICK START GUIDE v1.5
Client Initial Setup | 27. Select device from dropdown menu and open AdaptrumTVBD8. Select the Installation Tab9. Add all (should be 3) MAC addresses in dropdown. One MAC address is the laptop’s, one MAC address is the router’s LAN, one MAC address is the router’s WAN. NOTE: There is a maximum of 7 MAC addresses allowed in the lter table10. Enter name of client in System Notes NOTE: DO NOT CLICK “Save All Settings to Target and Reboot”1. Connect PoE data connection to WAN port of router2. Connect laptop to LAN port of router3. Connect PoE output connection to CPE4. Wait 60 seconds for CPE to power on5. Connect PoE data connection to LAN port of routerChannel Scan Mode: Client(FCC/OFCOM) mode(1)ACRS 2.0 Client Initial SetupAdd all MAC addressesAdaptrum ClientAdaptrum Client
Client Initial Setup | 31. Select the Database Tab2. Select “Scan Channel Set” to scan for (max. 10). This should include the channel the base is on3. Enter location of device (LAT, LONG, Height)1. Save All Settings to Target and Reboot2. When Client reboots, check that the laptop is getting internet service3. Move PoE data connection from LAN port to WAN portACRS 2.0 Client LED ReferenceLocation Information Set Channels for Client to Scan onChannel Selection window will popup
Copyright © 2017 Adaptrum, Inc.408 850 9996 adaptrum.com Antenna Orientation1. Client Yagi antennas should all be pointed directly at the Base Panel antenna for best SNR2. All Client antennas must be within a 120-degree arc of the base3. Fins should be vertically oriented4. Ensure there are no objects within a few feet in front of the yagi antenna to allow for better SNRPanel to Multi-Yagi Client InstallationsBasePanel AntennaClient Yagi Antenna

Navigation menu