Actiontec Electronics SBWD50A ScreenBeam Mini Wireless Display Receiver User Manual

Actiontec Electronics Inc ScreenBeam Mini Wireless Display Receiver Users Manual

Contents

Users Manual

Wireless Display ReceiverModel # SBWD50AInstallation GuideThis Installation Guide will walk you through the easy steps to set up your ScreenBeam Mini Receiver. During this process, we’ll show you how to :A Install the ReceiverB1 Connect Using Intel WiDi AppB2 Connect Using Windows 8.1 or HigherB3 Connect Using WiFi Miracast-Enabled DevicePart No: 0530-0703-000
Welcome!Step2 Plug the ScreenBeam Mini Display Receiver into an available HDMI port on your HDTV.Step3 Plug the male connector (smaller end) of the USB cable to the ScreenBeam Mini USB micro-port labled “Power.”A Install the ReceiverCongratulations on your purchase of a ScreenBeam Mini Wireless Display Receiver. The Mini Wireless Display Receiver connects to your compatible Intel WiDi or Miracast wireless display-capable device, and displays the device’s screen on your HDTV.Step1 Get the ScreenBeam Mini Wireless Display Receiver and USB cable from the ScreenBeam Mini box.Step4 Plug the male connector (larger end) of the USB cable to a USB port on your HDTV.
B1 Connect Using Intel WiDi AppStep5 Turn on your TV and switch the input source until you see the Ready to Connect screen. Note: If your device’s OS is Windows 8.1 or higher, proceed to section B2 (“Connect Using Windows 8.1 or Higher”) for connection instructions.The ScreenBeam Mini Receiver is now connected to your HDTV. Proceed to one of the next three sections of this Guide (depending on the device you are using to connect to ScreenBeam Mini) to nish the connection procedure.Note: If you cannot plug the Receiver into an HDMI port on your TV (due to other components, or a poorly accessible port), use the supplied HDMI cable to connect the Receiver.
Step2 The device scans for available receivers. Select the same receiver name as seen on the HDTV and click Connect. (The Connect Automatically checkbox is optional.)Step3 Wait until the Receiver displays a PIN on the HDTV, and a PIN entry box on the screen of the WiDi device. Enter the PIN in the PIN entry box on the WiDi device, then click Continue.Step1Find the Intel Wireless Display application on the device and launch it. To nd the application, go to Windows Search on your device and search for “Intel WiDi” in your apps.Note: ScreenBeam Mini only supports the 2.4GHz wireless frequency. Make sure your device is not connected to a 5GHz wireless router prior to connecting ScreenBeam Mini.
Step4 The HDTV displays messages to show the status of the connection process.Step5 A Connection Successful screen appears on your device’s screen, as well as on the HDTV.Note: Make sure the device supports Intel Wireless Display (WiDi) software version 3.5 or higher. To nd out what version of Intel WiDi your device has, enter the Intel WiDi application and click Help, then navigate to the “About WiDi” section. To obtain the latest Intel WiDi software and drivers, go to: http://www.intel.com/go/wirelessdisplayupdate Display Tip: If the edges of the device screen cannot be seen on the HDTV, adjust cropping. To do this, enter the WiDi application and click Settings. Navigate to the “Picture and Sound” section, click Adjust cropping…, and adjust the HDTV picture by clicking plus (+) or minus (-).
B2 Connect Using Windows 8.1 or HigherStep1 From the Windows desktop, navigate to the Charms menu and select Devices. You can also use the shortcut keys, Windows + K. Step2 From the Charms menu, click the Project icon.Step3 From the Project screen, select Add a wireless display.Step4 Select the ScreenBeam Receiver from the list.
Step5 Enter the PIN as displayed on the television screen, then connect and display.Note: If you are running Windows 8.1 and the screens above do not appear, go to http://www.actiontec.com/widi81 for the latest software updates.Step1 On a Miracast-enabled Android device, locate and open the Wireless Display Application.B3 Connect Using Miracast-Enabled DeviceYou can connect to ScreenBeam Mini from a Miracast-enabled Android device, such as a smartphone, tablet, or game console (nd the wireless display feature in Settings). Also, the device should be running the latest software for best performance. Note: The name of the Wireless Display Application depends on the device type and model. Refer to the device’s carrier or manufacturer user manual for more details.
Step2 The Wireless Display Application scans for available receivers. Select the ScreenBeam Receiver from the list.Step3 Wait for the device to associate with the Receiver. When it does, the device’s screen will be displayed on the HDTV.Go to http://www.actiontec.com/support for product support, updates, and more information including:• Firmware Updates • Troubleshooting • Registration • FAQsC Product Support & Additional Information
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu