Actiontec Electronics SBRT8812AU ScreenBeam 802.11 a/b/g/n/ac WiFi Module User Manual Manual

Actiontec Electronics Inc ScreenBeam 802.11 a/b/g/n/ac WiFi Module Manual

Manual

PRODUCT SPECIFICATION Version 1.1 ScreenBeam 802.11 a/b/g/n/ac WiFi Module Model Number: SBRT8812AU 2.4G channel：1-11 5G channel：36-48 ;149-165 Custom Approval Section Custom Name Department Approval Date： DESIGN CHECK APPROVAL Actiontec Electronics, Inc. 760 North Mary Ave., Sunnyvale, California 94086 United States
PRODUCTS SPECIFICATION PAGE 2 OF 13 SBRT8812AU Version 1.1Document revision history Revision Date Approved by Remarks Version 1.0 2015-02-27 Draft Version 1.1 2015-04-17 Adding statement
PRODUCTS SPECIFICATION PAGE 3 OF 13 SBRT8812AU Version 1.11. General Description This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on Realtek RTL8812AU chipset that complied with IEEE 802.11b/g/n/ac Draft 3.0 compatible WLAN ,and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g,11Mbps for IEEE 802.11b and 150Mbps for IEEE 802.11n and 433.3Mbps for IEEE 802.11ac to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11 a/b/g/n/ac USB Module offers absolute interoperability with different vendors 802.11a/b/g/n/ac.Access Points through the wireless LAN. 2. Features z Compatible with IEEE 802.11b standard to provide wireless 11Mbps date rate. z Compatible with IEEE 802.11g standard to provide wireless 54Mbps date rate. z Compatible with IEEE 802.11n standard to provide wireless 150Mbps date rate. z Compatible with IEEE 802.11ac standard to provide wireless 433.3Mbps date rate. z Operation at 2.4~2.5GHz and 5.15~5.825GHz frequency band to meet worldwide regulations z Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility. z Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication z Supports IEEE 802.11i(WPA and WPA2),WAPI,. enhanced security z Friendly user configuration and diagnostic utilities z Drivers support Windows XP,Vista.Win7 z High speed USB 2.0 interface z ROHS compliant
PRODUCTS SPECIFICATION PAGE 4 OF 13 SBRT8812AU Version 1.13. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 IEEE 802.11b Section Feature Detailed Description 3.2.1.1 Standard ● IEEE 802.11b3.2.1.2 Radio and Modulation Schemes ● DQPSK , DBPSK , DSSS , and CCK 3.2.1.3 Operating Frequency ● 2412 ～ 2472MHz ISM band 3.2.1.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 14 channels for Japan3.2.1.5 Data Rate ● 11,5.5,2,and 1Mbps 3.2.1.6 Media Access Protocol ● CSMA/CA with ACK 3.2.1.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25℃ ● 17dBm(±2dB) at 1,2,5.5,11Mbps 3.2.1.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% ● -76 dBm at 2Mbps ● -76 dBm for 11Mbps
PRODUCTS SPECIFICATION PAGE 5 OF 13 SBRT8812AU Version 1.13.2.2 IEEE 802.11g Section Feature Detailed Description 3.2.2.1 Standard ● IEEE 802.11g3.2.2.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM with OFDM 3.2.2.3 Operating Frequency ● 2412 ～ 2472MHz ISM band 3.2.2.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 13 channels for Japan3.2.2.5 Data Rate ● 6,9,12,18,24,36,48,54Mbps3.2.2.6 Media Access Protocol ● CSMA/CA with ACK 3.2.2.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ ● +17 dBm at 6,9Mbps ● +16 dBm at 12,18Mbps ● +15 dBm at 24,36Mbps ● +14 dBm at 48,54Mbps 3.2.2.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ ● -82 dBm at 6Mbps ● -81 dBm at 9Mbps ● -79 dBm at 12Mbps ● -77 dBm at 18Mbps ● -74 dBm at 24Mbps ● -70 dBm at 36Mbps ● -66 dBm at 48Mbps ● -65 dBm at 54Mbps
PRODUCTS SPECIFICATION PAGE 6 OF 13 SBRT8812AU Version 1.13.2.3 IEEE 802.11a Section Feature Detailed Description3.2.3.1 Standard ● IEEE 802.11a 3.2.3.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM with OFDM 3.2.3.3 Operating Frequency ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz for US and Canada ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz for Japan ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz Hz for Europe ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz for China3.2.3.4 Channel Numbers ● 12 non-overlapping channels for US and Canada ● 8 non-overlapping channels for Japan ● 19 non-overlapping channels for Europe ● 4 non-overlapping channels for China 3.2.3.5 Data Rate ● 6,9,12,18,24,36,48,54Mbps 3.2.3.6 Media Access Protocol ● CSMA/CA with ACK 3.2.3.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ ● +14 dBm at 6,9Mbps ● +13 dBm at 12,18Mbps ● +12 dBm at 24,36Mbps ● +11 dBm at 48,54Mbps 3.2.3.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ ● -82 dBm at 6Mbps ● -81 dBm at 9Mbps ● -79 dBm at 12Mbps ● -77 dBm at 18Mbps ● -74 dBm at 24Mbps ● -70 dBm at 36Mbps ● -66 dBm at 48Mbps ● -65 dBm at 54Mbps
PRODUCTS SPECIFICATION PAGE 7 OF 13 SBRT8812AU Version 1.13.2.4 IEEE 802.11n Section Feature Detailed Description3.2.4.1 Standard ● IEEE 802.11n 3.2.4.2 Radio and Modulation Type ● BPSK , QPSK , 16QAM ,64QAM with OFDM 3.2.4.3 Operating Frequency ● 2.4GHz band:2412 ~ 2472MHz 2412 ~ 2462MHz (for FCC) ● 5GHz and:5.18 ~ 5.24GHZ, 5.745~5.825GHz 3.2.4.4 Data Rate MCS GI=800ns GI=400ns 20MHz 40MH 20MHz 40MHz 0 6.5 13.5 7.2 15 1 13 27 14.4 30 2 19.5 40.5 21.7 45 3 26 54 28.9 60 4 39 81 43.3 90 5 52 108 57.8 120 6 58.5 121.5 65.0 135 7 65 135 72.2 150 3.2.4.5 Media Access Protocol ● CSMA/CA with ACK 3.2.4.6 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain,Data Rate and at roomTemp. 25℃ ● 2.4GHz Band/HT20 +14dBm at MCS0~7 ● 2.4GHz Band/HT40 +14dBm at MCS0~7 ● 5GHz Band/HT20 +11dBm at MCS0~7 ● 5GHz Band/HT40 +11dBm at MCS0~7 3.2.4.7 Receiver Sensitivity at Antenna Connector Typical Sensitivity at each RF chain at Which Frame(1000-byte PDUs)Error Rate=10% and at room Temp. 25℃ 2.4GHz Band/HT20 ● -82dBm at MCS0 ● -79dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS3 ● -70dBm at MCS4 ● -66dBm at MCS5 ● -65dBm at MCS6 ● -64dBm at MCS7 2.4GHz Band/HT40 ● -79dBm at MCS0 ● -76dBm at MCS1 ● -74dBm at MCS2 ● -71dBm at MCS3 ● -67dBm at MCS4 ● -63dBm at MCS5 ● -62dBm at MCS6 ● -61dBm at MCS7 5GHz Band/HT20 ● -82dBm at MCS0 ● -79dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS3 ● -70dBm at MCS4 ● -66dBm at MCS5 ● -65dBm at MCS6 ● -64dBm at MCS7 5GHz Band/HT40 ● -79dBm at MCS0 ● -76dBm at MCS1 ● -74dBm at MCS2 ● -71dBm at MCS3 ● -67dBm at MCS4 ● -63dBm at MCS5 ● -62dBm at MCS6 ● -61dBm at MCS7
PRODUCTS SPECIFICATION PAGE 8 OF 13 SBRT8812AU Version 1.13.2.5 IEEE 802.11ac Section Feature Detailed Description3.2.5.1 Standard ● IEEE 802.11ac 3.2.5.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM 3.2.5.3 Operating Frequency ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz for US and Canada ● 5.15~5.35GHz and 5.47~5.725GHz for Japan ● 5.15~5.35GHz and 5.47~5.725GHz for Europe ● 5.725~5.825GHz for China3.2.5.4 Channel Numbers ● 12 non-overlapping channels for US and Canada ● 8 non-overlapping channels for Japan ● 19 non-overlapping channels for Europe ● 4 non-overlapping channels for China 3.2.5.5 Data Rate ● at most 433.3 Mbps 3.2.5.6 Media Access Protocol ● CSMA/CA with ACK 3.2.5.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ ● +11 dBm at HT20 / HT40 3.2.5.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ 5GHz Band / HT20 ● -82dBm at MCS0 ● -79dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS3 ● -70dBm at MCS4 ● -66dBm at MCS5 ● -65dBm at MCS6 ● -64dBm at MCS7 ● -59dBm at MCS8 ● -57dBm at MCS9 5GHz Band / HT40 ● -79dBm at MCS0 ● -76dBm at MCS1 ● -74dBm at MCS2 ● -71dBm at MCS3 ● -67dBm at MCS4 ● -63dBm at MCS5 ● -62dBm at MCS6 ● -61dBm at MCS7 ● -56dBm at MCS8 ● -54dBm at MCS9 5GHz Band / HT80 ● -76dBm at MCS0 ● -73dBm at MCS1 ● -71dBm at MCS2 ● -68dBm at MCS3 ● -64dBm at MCS4 ● -60dBm at MCS5 ● -59dBm at MCS6 ● -58dBm at MCS7 ● -55dBm at MCS8 ● -51dBm at MCS9
PRODUCTS SPECIFICATION PAGE 9 OF 13 SBRT8812AU Version 1.14. Electrical and Thermal Characteristics 4.1 Temperature Limit Ratings Parameter Minimum Maximum Units Storage Temperature -40 +80 　℃ Ambient Operating Temperature 0 60 　℃ Junction Temperature 0 125 　℃ 4.2 General Section Feature Detailed Description 5.2.1 Antenna Type ● Integrated antenna 5.2.2 Operating Voltage ● 5V±10% 5.2.3 Current Consumption ● ＜900mA 5.2.4 Form Factor and Interface ● High Speed USB2.0 Interface 4.3 Software Driver Windows XP/ WinCE/ Vista,/ Win7, Linux, MAC Security 64/128-bits WEP, WPA, WPA2
PRODUCTS SPECIFICATION PAGE 10 OF 13 SBRT8812AU Version 1.15 Connector Definition 5-Pin 1.25 mm PAD Pin 1 2 3 4 5 Definition Power_EN GND D+ D- VDD（+5V） 6 Mechanical Dimensions *TLERANCES ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED *UNIT:mm
PRODUCTS SPECIFICATION PAGE 11 OF 13 SBRT8812AU Version 1.1Appendix 1 : Schematic 5GFE M0_P55GFEM1_P55G_0D+HSDPD-HSDM5G_1 2G_1EN_P1LXL1110nHNetDX1_5NetC69_1NetCON0_1NetCON0_2NetC51_1NetC11_2NetC51_2L710nHC674p7FPAPE_5G_1PAPE_5G_0PDnRF2ON_1RREFSPS_P3RF5IP_0RF5OP_0TRSW_ 0RF5OP_1RF5IP_1RF2OP_1V12RFV12RFV12V12TRSWB_ 0TRSW_1TRSWB_1V12V33V12V33V33C2515pFC270u1F C370u1FC510u1FC784p7FXTALP30RR9C2615pFV33C610u1FC280u1FC7210uFC700u1FNetC51_2XOC460u1FC150u1FC380u1FC430u1FC540u1FC550u1FRF2OP_0RF2ON_0R1622KR15100K100KR7R1150KL14u7HQ1G5728SW 3EN 1GND 2FB5VIN4C88100pFV33C850u1FC110uFC421uFC1010pFC8410pFRF2ON_1RF2OP_1V33C7110uFC160u1FC241uFV33C500p3FC601uFC591uFC521uFC180p3FC64p7FC310pFCNPC351p2FC641p2F10KR6CNPTRN_0TR P _0V33V12V33V33ANT11234L121nHC9NP C1710uFC631uFV33V33C574p7F5G FEMIC3GND3GND 7GND14PA_EN 6GND1VCC1 10VDD 11GND 17VCC24RX2CRX15TX 8ANT13GND 12NC 9VDET 5LNA_EN16C931uF L81n2HC90NP100KR42CNPCNPV33RF2OP_0RF2ON_05G FEMIC2GND3GND 7GND14PA_EN 6GND1VCC1 10VDD 11GND 17VCC24RX2CRX15TX 8ANT13GND 12NC 9VDET 5LNA_EN16L21n2HC690u1FC680u1FV33C131uF C121uFCNP CNPC344.7pFC810pF100KR1C981uFCNPC23NPV332G_0TX5G_1XIXIXIXIXIXIXIXIXIXIXIXIXIXIXIXI5VFB_P5NetDX0_55VV12V33V33 V33GNDRF5IP_1V33RF5IP_05GFEM0_P13V12VD12V12RFVD12RF_0V12RF5OP_1V33PAPE_5G_1V33V335GFEM1_P16TR SW B_ 1TR SW B_ 0TR SW B_ 1RX5G_0TR SW B_ 05GFEM0_P16PAPE_5G_0V33RF5OP_0V12V33C621uFV12V12LRTL8812AUIC1RF2IN_S1 67RF2IP_S05RF2IN_S04V12_BB_S014RF5IP_S012VD33PA5G_S011V12_AFE_S015V12_S03RF5IN_S013V33_SYS1RF2ON_S07PAPE_2G_S016GND77RF2OP_S08V33_PAD2G_S06RF5OP_S010V33_PAD5G_S09TRSWB_S019GPIO[1]38TRSW_S018VD12A20LED2 / GP IO[8]33XI22XO23CK_BT24ANTSW25VD33A21GPIO[7] / BT_P RI32ANTSWB26VD12D27VD33D28GPIO[4] / WL_ACT29GPIO[5] / BT_RFQ / BT_EN30GPIO[6] / BT_S TATE31PAPE_5G_S017LED1 / GP IO[9]34LED0 / GP IO[10]35GPIO[11] / PDn36GPIO[0] / BT_Suspend37GPIO[2] 39GPIO[3] 40VDSPS33 57FB_SPS 58GND 54LX_SPS0 56LX_SPS0 55VD33D 59VD12D 60TRSW_S1 62TRSWB_S1 61PAPE_5G_S1 63PAPE_2G_S1 64V12_AFE_S1 65V12_BB_S1 66RF5IN_S1 76RF5IP_S1 75VD33PA5G_S1 74RF5OP_S1 73V12_SYS2V33_PAD5G_S1 72RF2ON_S1 70RF2OP_S1 71V33_PAD2G_S1 69RF2IP_S1 68GND 41HSDP 42HSDM 43VD12S 44VD33S 45RREF 46VDDTX 47GND 50HSIN 51HSON 48HSOP 49VDDRX 53HSIP 52C4810uFC1310uFL104u7H24KR11L910nHC664p7FL52n7HC335p6FC395p6FC211p2FL610nHL32n7HX140MHzXTALP122XTALP 344U28025-A1P15P3 1P2 3G2G4G6U18025-A1P15P3 1P2 3G2G4G6C441nFC290u1FC450u1FC480.1uFC230p75FL42n7HC141p0FC400u1FC820p75F C800p75FC410pFL142n7H5VD-5VGNDD+Po w e r ENNCPowerENPowerEND+D_5VV12V12LX5586LX55860RR12VD125GFEM1_P13RX5G_1TX5G_0TR P _1L161nH0RR14V12C741p2F L22n7HC751p2FL132n7HNetC11_2V12 V12RFQ2G9091SW 3EN 1GND 2FB5VIN40RR4C110uFVD12V33C8610uFV12LCNPC81NPNetCON1_1C221p2FANT21234100KR10
PRODUCTS SPECIFICATION PAGE 12 OF 13 SBRT8812AU Version 1.1Appendix 2 : Statement FCC Important Notes: (1) FCC Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. (2) Co-location Warning: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. (3) OEM integration instructions: This device is intended only for OEM integrators under the following conditions: The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). (4) Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. (5) End product labeling: The final end product must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID: LNQSBRT8812AU”. (6) Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
PRODUCTS SPECIFICATION PAGE 13 OF 13 SBRT8812AU Version 1.1 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems.

Navigation menu