Actiontec Electronics C3000A 802.11n and 802.11ac Wi-Fi Router User Manual

Actiontec Electronics Inc 802.11n and 802.11ac Wi-Fi Router

Contents

User Manual

User Manual802.11n and 802.11ac Wi-Fi RouterModel # C3000A0535-00xx-000
iTable of Contents1 Introduction  4Package Contents  5Minimum System Requirements  5Features 5Getting to Know the Router  6Connecting the Router  92 Accessing the Home Screen  11Accessing the Home Screen  11Icon Bar  12Connection Status  123 Checking the Router’s Status  13Accessing the Status Screens  13Connection Status  14Line 1/Line 2 Status  14WAN Ethernet  14Routing Table  15Firewall Status  15NAT Table  15Wireless Status  16Advanced Wireless Status  16Wireless Monitor  16Modem Utilization  17LAN Status  17ARP Table  17Network Devices  17Interface Statistics  18Multicast Statistics  18System Log  184 Configuring Wireless Settings  19Accessing Wireless Settings  19i
iiC3000A 802.11n and 802.11ac Wi-Fi RouteriiBasic Settings  20Advanced Settings  21WPS 21MAC Address Control  21WDS 22Band Steering  225 Configuring Firewall Settings  23Accessing Firewall Settings  23Firewall 24IPv6 Firewall  24Port Forwarding  24Applications 25DMZ Hosting  25IPv6 DMZ Hosting  26UPnP 265 Advanced Settings  27Accessing the Advanced Setup Screens  27Services Blocking  28Website Blocking  28Scheduling Access  28Parental Controls  28WAN IP Addressing  29IPv6 WAN Settings  29 RFC1483 Transparent Bridge  30IPv6 LAN Settings  30DHCP Reservation  30Dynamic DNS  30DNS Host Mapping  31IP QoS Upstream Settings  31IP QoS Downstream Settings  31IPv6 Q0S  32Remote GUI  32Remote Telnet  32Dynamic Routing  32Admin Password  33Storage Device Info  33Samba Configuration  33
iiiC3000A 802.11n and 802.11ac Wi-Fi RouterReboot 34Restore Defaults  34Upgrade Firmware  34Check for New Firmware Link  34LAN IP Settings  35Static IP LAN  35Speed Test  35Ping Test  35Tcpdump Debug  36Iperf Test  36IPv6 Ping Test  36Traceroute 36IPv6 Traceroute  37Time Zone  37Language Settings  37DNS Cache  37IGMP Setting  38Upgrade History  38ALG 38Tool Box  38DLNA 39xDSL Diagnostics  39Print Server  39A Specifications  40General 40Wireless Operating Range  41LED Indicators  41Power Adapter  41Environmental 42   Notices  43Warranty 43Important Safety Instructions  43FCC Class B Equipment  44Important Note on Wi-Fi  45Contact Info  46
4IntroductionCongratulations for purchasing the C3000A 802.11n and 802.11ac Wi-Fi Router. The Router is a single platform device that supports universal WAN access, FTTN, FTTdp, FTTB, or FTTP. With support for advanced 802.11ac 4x4 WiFi, the Router enables blazing fast HD video  streaming, with multi-channel HD video throughput. The Router also offers an unprecedented level of security, helping protect your network  resources. It has also been designed to deliver unparalleled WiFi  performance, using dual-band WiFi supporting speeds up to 2.3 Gbps.1
5C3000A 802.11n and 802.11ac Wi-Fi RouterPackage Contents• Black Power adapter• Yellow cable (Ethernet, 6 ft.)• White cable (Ethernet, 10 ft.)• Green cable (RJ14, 12 ft.)• Quick Start Guide• Installation Guide• Wall-mount template• Vertical standMinimum System Requirements•  Active ADSL2+ service•  Computer with an 10 Mbps or 10/100/1000 Mbps Ethernetconnection•  Microsoft Windows 10, 8, 7; Mac OS OS X+•  TCP/IP network protocol installed on each computerFeatures•  ADSL2+, VDSL2, and WAN Ethernet in a single CPE•  Dual Band WiFi delivering up to 2.3 Gbps with 802.11ac 4x4 5GHzand 802.11n 3x3 2.4GHz•  Optimized for IPTV and Video over WiFi
6IntroductionGetting to Know the RouterThis section contains a quick description of the Router’s lights, ports, and other features. The Router has several indicator lights (LEDs) and a button on its front panel, and a series of ports and switches on its rear panel.Front PanelThe front panel of the Router features 13 LEDs and a WPS (Wireless Protected Setup) button.PowerThe Power LED illuminates green when the Router is properly connected to a WAN Internet connection.DSL 1/DSL2The DSL LEDs illuminate green when the Router is properly connected to a DSL Internet connection.InternetThe Internet LED illuminates green when the Router is properly connected to a WAN Internet connection.EthernetThe Ethernet LED illuminates green when the Router is properly connected to a WAN Ethernet connection.Ethernet 1/2/3/4The Ethernet LEDs illuminate green when the Router is properly connected to a LAN Ethernet connection.
7C3000A 802.11n and 802.11ac Wi-Fi RouterUSBThe USB LED illuminates green when the Router is properly connected to a USB connection.Wi-Fi 2.4G/5GThe Wi-Fi LEDs illuminate green when the Router’s wireless network is operating and properly configured in each band.WPS ButtonThe WPS button is used when connecting a wireless device to the Router’s wireless network using WPS. Rear PanelThe rear panel of the Router features 8 ports, and a Reset button.Power PortThe Power port is used to connect the Power cord (Model No.  CDS024T-W120U by Adapter Tech) to the Router.Reset Button Depressing the Reset button for 10 seconds will restore the            Router’s factory default settings. The reset process will start after          releasing the button.WARNING! Do not unplug the Power cord from the Router  during the reset process. Doing so may result in permanent damage to the Router.
8IntroductionWAN Ethernet PortThe WAN Ethernet port is used to connect the Router to a WAN connection via an Ethernet cable.LAN Ethernet Ports (4)The LAN Ethernet ports are used to connect computers to the Router  via Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto- sensing ports, and either a straight-through or crossover Ethernet cable  can be used when connecting to the ports.USB PortThe USB port is used to connect the Router to a USB device.DSL Port (Single & Bonded)The DSL port is used to connect the Router to a DSL wall outlet via DSL cable.
9C3000A 802.11n and 802.11ac Wi-Fi RouterConnecting the RouterThere are many variables involved when connecting the Router, depending on the type of Internet service available. The figure below shows the  possible connections available for the Router. Connecting a Computer to the RouterTo connect a computer to the Router to access the Router’s graphical user interface (GUI):1. Get the Router and black Power cord from the box.2. Plug the black Power cord in the black port on the back of the Routerand then into a power outlet.3. Plug the yellow Ethernet cable from the box into one of the four yellowEthernet ports on the back of the Router.4. Make sure the computer is powered on, then plug the other end of theyellow Ethernet cable into an Ethernet port on the computer.
10Introduction5. Make sure that the LED on the LAN port into which the Ethernet cableis plugged glows steadily green. This may take a few moments.6. The computer should either be configured with a statically defined IPaddress and DNS address, or instructed to automatically obtain anIP address using the Network DHCP server. The Router is set up, bydefault, with an active DHCP server, and it is recommended to leavethis setting as is.
11Accessing the Home ScreenThis chapter gives a short overview of the Home screen of the Router’s graphical user interface (GUI).Accessing the Home ScreenTo access the Home screen:1. Open a Web browser on computer connected, via Ethernet cable, toone of the Router’s LAN ports. In the Address text box, type:http://192.168.0.1then press Enter on the keyboard.2. The Router’s Home screen appears.The Router’s GUI is now accessible.2
12C3000A 802.11n and 802.11ac Wi-Fi RouterIcon BarAt the top of the Home screen is the Icon Bar. Here, you can quickly access the other four main sections of the Router’s GUI by clicking on the appropriate icon: Status (see chapter 3 for more details); Wireless Setup (see chapter 4 for more details); Firewall (see chapter 5 for more details); Advanced Setup (see chapter 6 for more details). Clicking Home in any other screen generates the Home screen.Connection StatusThe bottom of the Home screen consists of connection and device  information relating to the Router. There are no configurable options here.
13Checking the Router’s StatusThis chapter explains the options available on the Status screens, which display information about the Router’s network connections.Accessing the Status ScreensTo access the Router’s Status screens:1. Open a Web browser. In the Address text box, type:     http://192.168.0.1 then press Enter on the keyboard.2. The Router’s Main screen appears. Click the Status icon.3. The Connection Status screen appears. “Connection Status” is underthe “Internet Service” group.From here, all the Status screens can be accessed from the menu on the left.3
14C3000A 802.11n and 802.11ac Wi-Fi RouterConnection StatusClicking Connection Status from any Status screen generates the Connection Status  (see figure above). Information concerning devices connected to the Router’s network, whether wired or wireless, is  displayed here, along with the connected device’s IP address, MAC address, and (if applicable) IPv6 address. Line 1/Line 2 StatusClick Line 1 Status from any Status screen to generate the Line 1 Status screen. This screen displays the Router’s DSL connection parameters for DSL Line 1 port. Clicking Line 2 Status genreates the Line 2 Status screen, which displays the connection parameters for the Router’s DSL Line 2 port.WAN EthernetClick WAN Ethernet Status from any Status screen to generate the WAN Ethernet Status screen. This screen displays the Router’s WAN (wide area network) parameters.
15Checking the Router’s StatusRouting TableClick Routing Table from any Status screen to generate the Routing Table screen. This screen displays the Router’s routes.Firewall StatusClick Firewall Status from any Status screen to generate the Firewall Status screen. This screen displays parameters concerning the Router’s firewall.NAT TableClick NAT Table from any Status screen to generate the NAT Table screen. This screen displays the Router’s WAN (wide area network) parameters.
16C3000A 802.11n and 802.11ac Wi-Fi RouterWireless StatusClick Wireless Status from any Status screen to generate the Wireless Status screen. This screen displays the Router’s wireless network  parameters.Advanced Wireless StatusClick Advanced Wireless from the bottom of the Wireless Status  screen to generate the Advanced Wireless Statistics screen. This screen displays the Router’s additional wireless network parameters.Wireless MonitorClick Modemstatus Wireless Monitor from the bottom of the Wireless Status screen to generate the Wireless Monitor screen. This screen  displays parameters for the clients connected to the Router’s wireless  network.
17Checking the Router’s StatusModem UtilizationClick Modem Utilization from any Status screen to generate the Modem Utilization screen. This screen displays statistics related to the Router’s modem operation.LAN StatusClick LAN Status from any Status screen to generate the LAN Status screen. This screen displays the Router’s LAN (local area network)  parameters.ARP TableClick ARP Table from any Status screen to generate the ARP Table screen. This screen displays the Router’s ARP (address resolution  protocol) table.Network DevicesClick Network Device Table (underneath System Monitor) from any Status screen to generate the Network - Devices screen. This screen allows the user to scan the Router’s networks for new devices at a select-ed time interval.
18C3000A 802.11n and 802.11ac Wi-Fi RouterInterface StatisticsClick Interface Statistics from any Status screen to generate the Estimated Interface Statistics screen. This screen displays various  statistics and parameters relating to the Router’s connection interfaces.Multicast StatisticsClick Multicast Statistics from any Status screen to generate the Multicast Statistics screen. This screen displays the Router’s multicast statistics.System LogClick System Log from any Status screen to generate the System Log screen. This screen displays the Router’s system log, which keeps track of all events that occur on the Router.
19Configuring  Wireless SettingsThis chapter explains the options provided in the Wireless Setup  section of the Router’s firmware, including basic and advanced settings, and WPS.Accessing Wireless SettingsTo access the Wireless Settings screens:1. Open a Web browser. In the Address text box, type:http://192.168.0.1 then press Enter on the keyboard.2. The Router’s main screen appears. Enter the user name andpassword, then click Wireless Setup from the row of icons at the topof the screen.3. The Basic Settings screen appears, with a menu of other wirelessoptions listed on the left side of the screen.4
20C3000A 802.11n and 802.11ac Wi-Fi RouterBasic SettingsClick Basic Settings from any Wireless Settings screen to generate the Basic Settings screen, as shown in the figure above. This screen displays a series of settings relating to the basic functionality of the Router’s  wireless network, including SSID (network name), frequency, and security.Changing the Wireless Network Name (SSID)To change the name of the Router’s wireless network, enter the new name in the SSID Name text box in the Basic Settings screen, then click Apply.Changing the Wireless Key/PassphraseTo change the passphrase for the Router’s wireless SSID, at the Security Key Type, Use Custom Key/Passphrase, enter the desired Wireless Key/Passphrase in the text box, then click Apply.Enabling SSID Guest OptionEnabling this option in the Basic Settings screen allows guest users to access the Router’s wireless Internet connection, while preventing these users from accessing other wireless devices, including network printers or other unsecured network devices. To enable, click Enable button next to SSID Guest, then click Apply.
21Configuring Wireless SettingsAdvanced SettingsClick Advanced Settings from any Wireless Settings screen to generate the Advanced Settings screen. This screen displays a series of settings relating to the advanced capabilities of the Router’s wireless network, including compatibility mode, channel width, and WMM power save. WPS (Wi-Fi Protected Setup)Click WPS from any Wireless Settings screen to generate the WPS  (Wi-Fi Protected Setup) screen, which allows the user to configure WPS by following the onscreen instructions. MAC Address ControlClick MAC Address Control from any Wireless Settings screen to generate the Wireless MAC Authentication screen, which allows the user to configure allow or deny access to the Router’s wireless network using the MAC address of the wireless device. (Note: this feature only works if Band Steering is DISABLED.) Follow the onscreen instructions to  configure.
22C3000A 802.11n and 802.11ac Wi-Fi RouterWDSClick WDS from any Wireless Settings screen to generate the WDS Wireless Distribution System screen, which allows the user to configure the Router to allow wireless interconnection of access points via a  wireless connection. Follow the onscreen instructions to configure. Band SteeringClick Band Steering from any Wireless Settings screen to generate the Band Steering Configuration screen, which allows the user to configure the Router to automatically connect 2.4GHz and 5GHz wireless devices to the appropriate wireless network bandwidth. Also, this screen can be used to assign a certain wireless network and/or bandwidth to a particular wireless device. Follow the onscreen instructions to configure.
23Configuring  Firewall SettingsThis chapter explains the options provided in the Firewall section of the Router’s firmware, including setting up port forwarding and static NAT.Accessing Firewall SettingsTo access the Firewall screens:1. Open a Web browser. In the Address text box, type:http://192.168.0.1then press Enter on the keyboard.The Router’s Home screen appears. Click the Firewall icon.2. The Firewall screen appears, with a menu of other wireless optionslisted on the left side of the screen.5
24C3000A 802.11n and 802.11ac Wi-Fi RouterFirewallClick General from any Firewall Settings screen to display the Firewall screen, as shown in the figure above. To configure basic settings of the Router’s firewall, follow the onscreen instructions.IPv6 FirewallClick IPv6 Firewall from any Firewall Settings screen to generate the IPv6 Firewall screen. To set up, follow the onscreen instructions.Port ForwardingClick Port Forwarding from any Firewall screen to generate the Port Forwarding screen. Activating port forwarding allows the network to be exposed to the Internet in certain limited and controlled ways, enabling some applications to work from the local network (game, voice, and chat applications, for example), as well as allowing Internet access to servers in the local  network. This screen allows you to configure the port forwarding settings of the Router. If changes are made in this screen, click Apply at the  bottom of the screen to save them. Port forwarding settings should only be adjusted by experienced technical users who are extremely familiar with networking concepts.
25Configuring Firewall SettingsApplicationsClick Applications from any Firewall screen to generate the Applications screen. This screen allows the user to designate certain applications to be forwarded, circumventing the usual firewall security settings. If changes are made in this screen, click Apply at the bottom of the screen to save them. DMZ HostingClick DMZ Hosting from any Firewall screen to generate the DMZ Hosting screen. The DMZ host feature allows one device on the network to operate outside the firewall to use an Internet service that otherwise would be blocked, or to expose a networked device to all services without restriction or security. To activate, click in the Enable radio button, then type the device’s IP address in the appropriate text boxes.Caution! A DMZ host is not protected by the firewall and may be vulnerable to attack. Designating a DMZ host may also put other computers in the local network at risk. When designating a DMZ host, consider the security implications and protect it if necessary.
26C3000A 802.11n and 802.11ac Wi-Fi RouterIPv6 DMZ HostingClick IPv6 DMZ Hosting from any Firewall screen to generate the IPv6 DMZ Hosting screen. The DMZ host feature allows one device on the  network to operate outside the firewall to use an Internet service that  otherwise would be blocked, or to expose a networked device to all services without restriction or security. To activate, follow the onscreen instructions.Caution! A DMZ host is not protected by the firewall and may be vulnerable to attack. Designating a DMZ host may also put other computers in the local network at risk. When designating a DMZ host, consider the security implications and protect it if necessary. UPnPClick UPnP from any Firewall screen to generate the UPnP screen, which activates UPnP (Universal Plug and Play). To activate, set the preferred UPnP options, then click Apply.
27Advanced SetupThis chapter explains the options available with the Advanced Setup screens, which configure some of the more complex settings on the Router.Accessing the Advanced Setup ScreensTo access the Router’s Advanced Setup screens:1.  Open a Web browser. In the Address text box, type:     http://192.168.0.1 then press Enter on the keyboard.2.  The Router’s Main screen appears. Click the Advanced Setup icon.3.  A WARNING  screen appears. Technicians can click PROCEED toconfigure the Advanced Settings of the Router.4.  The Services Blocking screen appears.From here, all the Advanced Setup screens can be accessed from the menu on the left.6
28C3000A 802.11n and 802.11ac Wi-Fi RouterServices BlockingClick Services Blocking from any Advanced Setup screen to generate the Services Blocking screen (see the figure, above). This feature allows the user to block certain services from accessing the Router’s network(s). Follow the onscreen instructions to configure.Website BlockingClick Website Blocking from any Advanced Setup screen to generate the Website Blocking screen. This feature allows the user to block certain websites from accessing the Router’s network(s). Follow the onscreen instructions to configure.Scheduling AccessClick Scheduling Access from any Advanced Setup screen to generate the Scheduling Access screen. This feature allows the user to schedule access to the Router’s network(s) for certain devices. Follow the onscreen instructions to configure.Parental ControlsClick Parental Controls from any Advanced Setup screen to generate the Parental Controls Configuration screen. This feature allows the user to allow or prevent access to certain websites for devices on the Router’s network. Follow the onscreen instructions to configure.
29Advanced SettingsWAN IP AddressingClick WAN IP Addressing from any Advanced Setup screen to generate the WAN IP Address screen. This feature allows the user to set the  protocol used by the ISP for Internet access. Follow the onscreen  instructions to configure.IPv6 WAN SettingsClick IPv6 WAN Settings from any Advanced Setup screen to generate the IPv6 WAN Settings screen. This feature allows the user to set the IPv6 protocol used by the ISP for Internet access. Follow the onscreen  instructions to configure.WARNING: This setting should be configured by experienced network technicians only, since any changes could affect the Router’s IPv6 service.
30C3000A 802.11n and 802.11ac Wi-Fi RouterHow to Set the T3200 to RFC1483 Transparent BridgeFrom the WAN IP Address screen, select RFC 1483 Transparent Bridging and click Apply.  The Router will allow the WAN IP address to pass-through to the device connected to LAN Port 1 Only.IPv6 LAN SettingsClick IPv6 LAN Settings from any Advanced Setup screen to generate the IPv6 LAN Settings screen. This feature allows the user to set the IPv6 LAN IP settings on the Router. Follow the onscreen instructions to  configure.DHCP ReservationClick DHCP Reservation from any Advanced Setup screen to  generate the DHCP Reservation screen. This feature allows the user to lease a permanent DHCP-allocated address to a client on the Router’s network. Follow the onscreen instructions to configure.Dynamic DNSClick Dynamic DNS from any Advanced Setup screen to generate the Dynamic DNS screen. This feature allows the user to associate the WAN IP address of the Router with a host name. Follow the onscreen  instructions to configure.
31Advanced SettingsDNS Host MappingClick DNS Host Mapping from any Advanced Setup screen to generate the DNS Host Mapping screen. This feature allows the user to create a static host name for a specified IP address. Follow the onscreen  instructions to configure.IP QoS Upstream SettingsLog in as root to generate the IP QoS Upstream Settings screen. This feature allows the user to prioritize certain types of upstream data traffic over standard upstream data traffic. Follow the onscreen instructions to configure.IP QoS Downstream SettingsLog in as root to generate the IP QoS Downstream Settings screen. This feature allows the user to prioritize certain types of downstream data traffic over standard downstream data traffic. Follow the onscreen instructions to configure.
32C3000A 802.11n and 802.11ac Wi-Fi RouterIPv6 QoSLog in as root to generate the IPv6 QoS Settings screen. This feature allows the user to prioritize certain types of IPv6 data traffic over standard IPv6 data traffic. Follow the onscreen instructions to configure.Remote GUILog in as root to generate the Remote GUI screen. This feature allows the user to access the Router’s graphical user interface from a remote location. Follow the onscreen instructions to configure.Remote TelnetLog in as root to generate the Remote Telnet screen. This feature allows the user to access the Router from a remote location via telnet. Follow the onscreen instructions to configure.Dynamic RoutingClick Dynamic Routing from any Advanced Setup screen to generate the Dynamic Routing (RIP) screen. This feature allows the user to set up the Router on the network behind a modem using dynamic routing. Follow the onscreen instructions to configure.
33Advanced SettingsAdmin PasswordClick Admin Password from any Advanced Setup screen to generate the Admin Password screen. This feature allows the user to change the password for accessing the Router’s graphical user interface. Follow the onscreen instructions to configure.Storage Device InfoClick Storage Device Info from any Advanced Setup screen to generate the Storage Service screen. This feature allows storage devices connected to the Router to be easily accessed. Any storage devices connected to the Router will be listed in the table at the bottom of the screen.Samba ConfigurationClick Samba Configuration from any Advanced Setup screen to gener-ate the Samba Configuration screen. This feature allows the user to set up a Samba environment. Follow the onscreen instructions to configure.
34C3000A 802.11n and 802.11ac Wi-Fi RouterRebootClick Reboot from any Advanced Setup screen to generate the Reboot screen. Reboot the Router by clicking Reboot.Restore DefaultsClick Restore Defaults from any Advanced Setup screen to generate the Restore Defaults screen. To restore certain settings on the Router, click the appropriate Restore button.Upgrade FirmwareClick Upgrade Firmware from any Advanced Setup screen to generate the Upgrade Firmware screen. To upgrade the Router’s firmware, follow the onscreen instructions.Check for New Firmware LinkClick Check for new firmware link from any Advanced Setup screen to generate the Upgrade firmware from Internet screen. To upgrade the Router’s firmware from the Internet automatically, click Upgrade.
35Advanced SettingsLAN IP SettingsClick LAN IP Settings from any Advanced Setup screen to generate the LAN IP and DHCP Settings screen. This feature allows the user to set LAN IP and DHCP server settings on the Router. Follow the onscreen  instructions to configure.How to Manually Set the T3200 for Static IP From the WAN IP Address screen, select RFC 1483 via Static IP.  Enter the IP address to be assigned to the Router, the subnet mask and the IP Address of the Default Router.  Click Apply.Speed TestClick Speed Test from any Advanced Setup screen to generate the Speed Test screen. This screen allows the user to perform a speed test on the Router’s Internet (or WAN) connection. Enter the URL for a server at a speed test site, then click Test.Ping TestClick Ping Test from any Advanced Setup screen to generate the Ping Test screen. To perform a ping test on the Router, follow the onscreen instructions.
36C3000A 802.11n and 802.11ac Wi-Fi RouterTcpdump DebugClick Tcpdump Debug from any Advanced Setup screen to generate the Tcpdump Debug screen. This screen allows the user to copy the packet capture file to a USB flash drive connected to the Router, along with the CFE and wireless configuration files, for debugging purposes. Follow the onscreen instructions to complete.Iperf TestClick Iperf Test from any Advanced Setup screen to generate the Iperf Test screen. To perform an iperf test on the Router, follow the onscreen instructions.IPv6 Ping TestClick IPv6 Ping Test from any Advanced Setup screen to generate the IPv6 PingTest screen. To perform an IPv6 ping test on the Router, follow the onscreen instructions.TracerouteClick Traceroute from any Advanced Setup screen to generate the Traceroute screen. To perform an route trace on the Router, follow the onscreen instructions.
37Advanced SettingsIPv6 TracerouteClick IPv6 Traceroute from any Advanced Setup screen to generate the IPv6 Traceroute screen. To perform an IPv6 route trace on the Router,  follow the onscreen instructions. Time ZoneClick Time Zone from any Advanced Setup screen to generate the Time Zone screen. Use this screen to set the time zone on the Router.Language SettingsClick Language Settings from any Advanced Setup screen to generate the Language Settings screen. Use this screen to set the language on the Router’s graphical user interface.DNS CacheClick DNS Cache from any Advanced Setup screen to generate the DNS Cache screen. Use this screen to set up a DNS cache on the Router.
38C3000A 802.11n and 802.11ac Wi-Fi RouterIGMP SettingClick IGMP Setting from any Advanced Setup screen to generate the IGMP Configuration screen. Use this screen to set up IGMP processes on the Router.Upgrade HistoryClick Upgrade History from any Advanced Setup screen to generate the Upgrade History screen. This screen displays a list of firmware upgrades applied to the Router.ALGClick ALG from any Advanced Setup screen to generate the Firewall - ALG / Pass-Through screen. This screen allows the user to configure ALG settings on the Router.Tool BoxClick Tool Box from any Advanced Setup screen to generate the Tool Box screen. This screen allows the user to configure traffic and port mirroring on the Router.
39Advanced SettingsDLNAClick DLNA from any Advanced Setup screen to generate the DLNA screen. This screen allows the user to configure DLNA settings on the Router.xDSL DiagnosticsClick xDSL Diagnostics from any Advanced Setup screen to generate the xDSL Diagnostics screen. This screen allows the user to select a type of diagnostics on the Router.Print ServerClick Print Server from any Advanced Setup screen to generate the Print Server screen. This screen allows the user to select and configure a print server for the Router’s network.
40SpecificationsGeneralModel Number(s)C3000A 802.11n and 802.11ac Wi-Fi RouterStandardsIEEE 802.3 (10BaseT) IEEE 802.3u (100BaseTX) IEEE 802.11 b, g, n, ac (Wireless) G.dmtG.litet1.413RFC 1483, 2364, 2516ProtocolLAN - CSMA/CD WAN - PPP, DHCP, Static IPWANVDSL2 interfaceLAN10/100/1000 RJ-45 switched ports SpeedLAN Ethernet: 10/100/1000 Mbps auto-sensing Wireless: 802.11a, b, g, n, ac; 900 Mbps optimal (see Wireless Operating Range for details) A
41C3000A 802.11n and 802.11ac Wi-Fi RouterCabling TypeEthernet 10BaseT: UTP/STP Category 3 or 5 Ethernet100BaseTX: UTP/STP Category 5Wireless Operating RangeIndoorsUp to 91M (300 ft.) @ 300 MbpsOutdoorsUp to 457M (1500 ft.) @ 300 MbpsTopologyStar (Ethernet)LED IndicatorsPower, DSL 1, DSL 2, Internet, Ethernet, Ethernet 1, Ethernet 2, Ethernet 3, Ethernet 4, USB, WiFi 2.4G, WiFi 5G,  and WPS Push ButtonPower AdapterModel No.: CDS024T-W120U Input:  120 VAC, 50/60Hz, 0.58A Output: 12.0V === 2.0A Manufacturer: Adapter Tech
42SpecificationsEnvironmentalPowerExternal, 12V DC, 2A CertificationsFCC Part 15 Class B, Class C and E, FCC Part 68, ULOperating Temperature0º C to 45º C (32ºF to 113ºF)Storage Temperature-20ºC to 70ºC (-4ºF to 158ºF)Operating Humidity10% to 85% non-condensingStorage Humidity5% to 90% non-condensing
43NoticesWarrantyThis product has a one-year Limited Hardware Warranty and 90-day free software updates from date of purchase.Local LawThis Limited Warranty Statement gives the customer specific legal rights. The customer may also have other rights, which vary from state to state in the United States, and from country to country elsewhere in the world.To the extent that this Limited Warranty Statement is inconsistent with local law, this Statement shall be deemed modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the customer.Go to http://www.actiontec.com/products/warranty.php for more infor-mation.Important Safety InstructionsBasic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following:• Do not use this product near water – for example, near a bathtub,kitchen sink, laundry tub, or swimming pool, or in a wet basement;only clean with dry cloth.• Do not block any ventilation openings. Install in accordance withthe manufacturer’s instructions. Do not install near any heat sourcessuch as radiators, heat registers, stoves, or other apparatus includ-ing amplifiers that produce heat.• Do not use the telephone to report a gas leak in the vicinity of theleak.• Use only the power cord indicated in this manual.
       C3000A Wi-Fi Router44Coaxial CableIf applicable, the coaxial cable screen shield needs to be connected to the Earth at the building entrance per ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, “Grounding of Outer Conductive Shield of a Coaxial Cable,” or in accordance with local regulation.FCC Class B EquipmentThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radi-ate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the inter-ference by implementing one or more of the following measures:• Reorient or relocate the device;• Increase the separation between the equipment and receiver;• Consult the dealer or an experienced radio or television technicianfor help.ModificationsThe FCC requires the user to be notified that any changes or modifica-tions made to this device that are not expressly approved by Actiontec Electronics, Inc, may void the user’s authority to operate the equipment.
45         C3000A Wi-Fi RouterDeclaration of Conformity for Products Marked With the FCC LogoThis device complies with part 15 of the FCC. Operation is subject to the following two conditions:1. This device may not cause harmful interference;2. This device must accept any interference received, including interfer-ence that may cause undesired operation of the device.Important Note on Wi-FiIf applicable, this equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.The radio has been found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, 15.247 (b) (4),15.407 addressing RF Exposure from radio frequency devices as defined in Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. The equipment should be installed more than 30 cm (~12 in.) from your body or nearby persons.For product available in the USA market, only channel 1~11 can be oper-ated. Selection of other channels is not possible.The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite sys-tems.The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comp with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
46NoticesContact InfoFor questions regarding your product or the FCC declaration, contact:Actiontec Electronics, Inc 3301 Olcott Street, Santa Clara, CA 95054, United States Tel: (408) 752-7700 Fax: (408) 541-9003
C3000A Wi-Fi RouterFCC Part 68 User Manual Information This equipment complies with Part 68 of the FCC rules.  Located on the equip-ment is a label that contains, among other information, the ACTA registration number and ringer equivalence number (REN.) If requested, this information must be provided to the telephone company.The REN is used to determine the quantity of devices which may be connected to the telephone line.  Excessive REN’s on the telephone line may result in the devices not ringing in response to an incoming call.  In most, but not all areas, the sum of the REN’s should not exceed five (5.0).  To be certain of the number of devices that may be connected to the line, as determined by the total REN’s contact the tele-phone company to determine the maximum REN for the calling area.This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs.If this equipment causes harm to the telephone network, the telephone com-pany will notify you in advance that temporary discontinuance of service may be required.  If advance notice isn’t practical, the telephone company will notify the customer as soon as possible.  Also, you will be advised of your right the file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment.  If this happens, the telephone company will provide advance notice in order for you to make the nec-essary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment, please contact: Company Name:Address:TEL:FAX:Actiontec Electronics, Inc. 3301 Olcott St., Santa Clara, CA 95054(408) 752-7700 (408) 541-9003If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved.This equipment uses the following USOC jacks: RJ14It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is connected.  This is to avoid damaging the equipment caused by local lightening strikes and other electrical surges.

Navigation menu