Acrox Technologies RX07 Nano Receiver User Manual

Acrox Technologies Co., Ltd. Nano Receiver

User Manual

2.4GHz Wireless BlueTrace Mouse with Windows 8 Hotkeys USER'S GUIDE Ver.:1.00 CAUTION: To use this product properly, please read the user's guide before installing.
1Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2How to …recognize the parts 1. Left button 2. Right button 3. Scrolling Wheel 4. Front hotkey 5. Back hotkey 6. LED switch key 7. Nano Receiver 8. Battery Cover 9. Connect Button 10. OFF/ON Switch How to… set up your wireless mouse Step 1: Take the battery cover off. Step 2: Insert the batteries as shown inside the battery compartment. Step 3: Replace the battery cover
3 Step 4: Turn on power switch. Step 5: Your mouse will connect automatically, letting you use your mouse wirelessly AAA Battery Pull 1’st 2’nd
4How to… pair your wireless mouse and computer If your wireless Laptop Mouse has not been connected to your computer after completing the previous steps, the following information will help you to complete the connection. 1. Turn off and turn on the POWER SWITCH on your mouse. 2. Make sure the computer is switch on. 3. Disconnect then reconnect the NANO RECEIVER on the computer. 4. Press the CONNECT BUTTON on the underside of the mouse. 5. The LED SWITCH KEY will flash 10 seconds to indicate the mouse is pairing with the nano receiver on the computer. 6. Your mouse will connect automatically. How to… recognize the operating system Step 1: makes sure your wireless mouse is properly connected to your computer Step 2: press the LED SWITCH KEY , follow the indication of below LED lighting on the switch key . LED SWITCH KEY Change to which system BLUE LED on 10sec Window 8 BLUE LED OFF Window7 ,window Vista, Window XP, Windows 2000, Mac OS x 10.5 or later Step 3: If you need to travel with your wireless mouse, you can disconnect the nano receiver. Your mouse will remember the last operating system until the next time you reconnect the nano receiver to the computer.
5How to… use the hot keys Your wireless mouse has special FRONT HOTKEY and BACKHOT KEY designed for windows systems. For instructions on understanding the functions see below. FRONT HOTKEY System function Window 8 APPs Manu Window7 Window Vista Windows XP Windows 2000 Backward Mac OS x 10.5 or later Not Support BACK HOTKEY system function Window 8 Charms Manu Window7 Window Vista Windows XP Windows 2000 Forward Mac OS x 10.5 or later Not Support Battery Warning Statement… 1. Please insert the batteries with the correct position according to the instruction labeled in the mouse. 2. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. 3. Do not mix old and new batteries 4. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

Navigation menu