Acrox Technologies PRPENPOW01 Presenter Pen User Manual

Acrox Technologies Co., Ltd. Presenter Pen Users Manual

Users Manual

Presenter PenUser ManualVersion: V7.1Release: October, 2009Model:PDCPENPOWER
Penpower Technology Ltd.,Software User License AgreementYou are licensed to legally use this software program (“the Software”) by Penpower Technology Ltd (“Penpower”) under this license agreement (“The Agreement”). If you do not agree with any of the provisions in this Agreement, please do not install, copy or use the Software. By using the Software, you are deemed to fully understand and accept the provi-sions of this Agreement.1. Intellectual PropertyAll intellectual property rights in the Software, together with all information and docu-ments included in the packaging for the Software (including but not limited to copyrights), are property of Penpower, and are protected by relevant laws and regulations.2. License to UseYou are authorized to use the Software on one (1) single computer only. You may not use the Software on any other machines other than the said single computer.3. Authority to Copy The Software and all documents included with the Software, and copyright thereof, are property of Penpower. You are licensed to make one (1) copy of the Software for your per-sonal backup purposes. All other acts of copying are strictly prohibited.You may not sell, lease, dissemble, reverse engineer, copy, translate, adapt or derive the Software, or obtain the source code of the Software by any other means. You may not use the Software for any purposes other than those permitted under this Agreement.4. Business UsersIf you need to install or use the Software on more than one (1) computer, please contact Penpower or our local distributor to purchase a license for the additional use.5. LiabilityYou agree to indemnify Penpower against all losses, costs, debts, settlement payments or other expenses (including but not limited to attorneys fees) arising from your breach of this Agreement, and you agree to compensate Penpower for all of the abovementioned damages.6. No WarrantyEffectiveness of a packaged software in handling information is closely related to its soft-ware and hardware environment. The Software is published following careful development and product testing by Penpower, but Penpower is not able to conduct tests based on all pos-sible combinations of software and hardware environment. Therefore, Penpower is unable to promise nor warrant that there will be absolutely no risk of loss or damage of information, or any other kind of loss, during installation and/or execution of the Software. You must be fully aware of your risks in using the Software. Penpower will provide you with the Software and support services in respect of the Software to the maximum extent permitted by law. However, Penpower does not warrant that the Software and information included in the package of the Software contain no defects or errors. Penpower is not liable for any indirect, special or incidental loss arising from the
Software, including but not limited to loss of prots, damage to business reputation, ces-sation of work, hardware malfunction or damage, or any other commercial damage or loss arising from commercial use of the Software.7. Limitation of Liability and DamagesThe maximum amount of compensation payable by Penpower, in respect of any dam-age incurred by you for any reason under this Agreement, is limited to the amount you have already paid to Penpower in respect of the Software.Under no circumstances will Penpower be held liable for the possibility of loss, notwith-standing Penpower may be aware of the possibility of such loss.8. Prohibition Against SublicenseYou are prohibited to assign the license in respect of the Software granted to you under this Agreement, or to grant a sublicense to another person.9. JurisdictionWith regards to any disputes arising from this Agreement, Penpower and you agree that the court having jurisdiction over the business location of Penpower will be the court in the rst instance.10. MiscellaneousIn the event that any provision of this Agreement is found to be invalid at law, such inva-lidity will not affect the validity of any other provisions, or the legal enforceability of such other provisions.In the event that the Software cannot be executed under conditions of normal use, due to any damage to the original disk/s, Penpower will replace the disk/s free of charge.FCC Note-This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.FCC RF Radiation Exposure Statement:1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
ContentsChapter 1 Product Overview ........................................................................................... 1-11.1 Product Features ..................................................................................................... 1-11.2 Hardware Introduction ........................................................................................... 1-21.2.1 Hardware Specification .................................................................................................1-21.2.2 Hardware Function Introduction ...................................................................................1 - 2Chapter 2 Installation and Settings .................................................................................. 2-12.1 System Requirements ............................................................................................. 2-12.2 Handwriting Software Installation ......................................................................... 2-12.3 Hardware Connection ............................................................................................. 2-42.4 Run Penpower Jr. Handwriting System .................................................................. 2-42.5 Registration ............................................................................................................ 2-52.6 Calibration .............................................................................................................. 2-52.7 ID Code Matching .................................................................................................. 2-52.8 Mouse Mode Operation .......................................................................................... 2-6Chapter 3 New Pen/Mouse Mode ..................................................................................... 3-13.1 Run Penpower Jr. Handwriting System .................................................................. 3-13.2 Switching Modes .................................................................................................... 3-23.3 New Pen Mode ....................................................................................................... 3-33.3.1 Full Screen Writing .......................................................................................................3-43.3.2 How to Write .................................................................................................................3-53.3.3 How to Quickly Correct, Enter Phrases and Symbols ..................................................3-63.4 Balloon UI .............................................................................................................. 3-73.4.1 Phrase Correction .........................................................................................................3 - 83.4.2 Artificial Intelligence ....................................................................................................3-93.4.3 Split .............................................................................................................................3-103.4.4 Merge ..........................................................................................................................3-103.4.5 Homophone .................................................................................................................3-113.4.6 Related word ...............................................................................................................3-123.5 Penpower Mouse Mode ....................................................................................... 3-133.5.1 Artificial Intelligence ..................................................................................................3-133.5.2 Learning String ...........................................................................................................3-133.5.3 Update Phrase Database ..............................................................................................3-153.5.4 Signature .....................................................................................................................3-173.5.5 Online Translator ........................................................................................................3-183.5.6 Input Words by Related Phrase ...................................................................................3-20
3.6 Settings ................................................................................................................. 3-213.6.1 Recognition Setting .....................................................................................................3-213.6.2 General Setting............................................................................................................3-233.6.3 Writing Setting ............................................................................................................3-243.7 Writing Application .............................................................................................. 3-253.7.1 Switch Version ............................................................................................................3-253.7.2 Gesture ........................................................................................................................3-263.7.3 Mix Traditional and Simplified Writing .....................................................................3-263.7.4 Using Penpower Jr. in MSN Messenger .....................................................................3-27Chapter 4 Traditional Mode ............................................................................................. 4-14.1 Run Penpower Jr. Handwriting System .................................................................. 4-14.2 Writing Mode ......................................................................................................... 4-14.3 Full Screen Handwriting ........................................................................................ 4-24.3.1 Balloon UI .....................................................................................................................4-24.4 Writing-Pad ............................................................................................................ 4-34.4.1 Write Input Tool ............................................................................................................4-34.4.2 Phonetic Input Tool .......................................................................................................4-44.4.3 Keyboard Input Tool .....................................................................................................4-44.4.4 Dictionary Input Tool ....................................................................................................4-44.4.5 Symbol Input Tool ........................................................................................................4-54.5 Phrase .................................................................................................................... 4-64.5.1 Use Phurase to input words...........................................................................................4-64.5.2 Update Phrase Database ................................................................................................4-74.6 Other Functions ...................................................................................................... 4-84.6.1 Learning Tool ................................................................................................................4-84.6.2 Signature .......................................................................................................................4-84.6.3 On-Line Translator ........................................................................................................4-84.6.4 Settings ..........................................................................................................................4-94.6.5 Switch Version ............................................................................................................4-104.6.6 Gesture ........................................................................................................................4-104.6.7 Mix Traditional and Simplified Writing .....................................................................4-104.6.8 Using Penpower Jr. in MSN Messenger .....................................................................4-10Chapter 5 Presenter Mode ................................................................................................ 5-1Chapter 6 Assistant Tools .................................................................................................. 6-16.1 Penpower Voice Reader .......................................................................................... 6-26.1.1 Use Penpower Voice Reader .........................................................................................6 - 26.1.2 Reading Setting .............................................................................................................6-36.2 Penpower Translator ............................................................................................... 6-4
6.2.1 English Words ...............................................................................................................6 - 46.2.2 Chinese Characters ........................................................................................................6-56.2.3 English Chinese Sentence Translation ..........................................................................6-56.2.4 Chinese English Sentence Translation ..........................................................................6-66.2.5 Button Functions ...........................................................................................................6-66.3 Penpower Input Tool .............................................................................................. 6-86.3.1 Phonetic Input Tool .......................................................................................................6-86.3.2 Keyboard Input Tool .....................................................................................................6-96.3.3 Dictionary Input Tool ....................................................................................................6-96.3.4 Symbol Input Tool ........................................................................................................6-9Chapter 7 Fast User Switching ......................................................................................... 7-1
There may be newer versions of the software that was released during or after this product’s manufacturing date. If the content in the User Manual differs from the on-screen interface, please follow the instructions on the on-screen interface instead of the User Manual.NCC Warning StatementArticle 12Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.Article 14The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and theinterference no longer exists.
Chapter 1 Product Overview 1-1Chapter 1 Product Overview 1.1 Product Features<<Presentation Function>>• Compatible with PowerPoint: The presenter function is compatible with MS Power-Point.• Built-in slideshow controls: Next/Previous slide buttons and black screen functions help make your presentation more professional.• Mouse mode: By simply removing the stylus out of its slot, the stylus acts as your mouse so you can open links with just one touch of the stylus. • Timer: The device helps you manage your time during presentations with its built-in LCD timer. The automatic ve, two minutes and a times-up ashing light let you present without worrying about time constraints.• Laser pointer: You can highlight main points in your presentation with the built-in laser pointer.<<Handwriting Function>>• Multilanguage recognition kernel: The Pen recognizes over 23,000 Traditional/Simpli-ed Chinese characters, Hong Kong characters (HKSCS 2001), Japanese Kanji/Kataka-na/Hiragana, Korean, English letters, symbols, and numbers.• Articial intelligence recognition kernel: Let the Pen adapt to your handwriting and become your personalized device with a built-in handwriting recognition system.• Full-screen inputting: Write freely on the device and have it display on the big screen. This function can be integrated into other applications like Mail, or Microsoft Word... etc.• MSN/Yahoo Messenger pen tracing function: Send handwritten messages and hand-drawn graphics through any Instant Messenger with your extra personal touch.easier.
1-2 Presenter Pen 1. Wireless receiver: When you pull out the wireless receiver from the Presenter Pen hard-ware, the power turns on automatically. Connect the wireless receiver to the USB port of your computer, the Presenter Pen will connect with your computer wirelessly. Plug the wireless receiver back to the Presenter Pen, the power turns off.2. Left button:Handwriting mode: When press the left button, the system will replace the recognized character with the next candidate character. Press again, replace to the next candidate character and so on.1.2 Hardware Introduction1.2.1 Hardware Specication1. Dimensions: 118mm x62mm x 16mm2. Weight: 58g3. Writing Area: 56mm x43mm4. Radio Frequency: 2.4G 5. Transmission Distance: 10m6. Continuous Battery Consumption: Up to 8 hours writing time1.2.2 Hardware Function IntroductionFront Side Back Side12346510711128913Left Side Right Side
Chapter 1 Product Overview 1-3Presenter mode: In the Presenter mode, the left button acts as the page up function to show the previous page.3. Right button:Handwriting mode: It provides 7 Frequently Used punctuation symbols such as ，。、：；？！. When press the right button, the system will input the rst symbol. Press again, replace to the next symbol and so on.Presenter mode: In the Presenter mode, the right button acts as the page down function to show the next page.4. Laser point button: Press the laser point button to highlight the main points in your pre-sentation with the red laser light.5. LCD monitor: Press the timer setting button (See item 11) after 5 seconds, the LCD monitor will display the left time and alarm you at 2, 5 minutes left and time is up with the gentle red ash.6. Writing/Mouse area:Handwriting Mode: Writing in this area.Presenter mode: When pull the stylus out, you can use this area as a mouse pad.7. Laser light: When press the laser point button (See item 4), it will turn this red laser light on.8. ID matching button: If there is more than two Presenter Pens or wireless devices around you and interference your writing or presentation, you may push ID matching button to match your Presenter Pen and your wireless receiver. Please refer to 2.7 ID Code Match-ing for details.9. Battery cover: Push the wedge of the battery cover upward to open the battery cover, and put an AAA battery in with the positive electrode in the right side. When the electric power is insufcient, the LCD monitor will display “Lo” in the timer screen to remind you to replace the battery.10. Stylus pen: Pull the stylus out to write or use it as a mouse. Place it back, when you do not need to use the stylus.11. Timer setting button: Let you set the presentation time. Press it once, add 5 minutes and so on. The remaining time will display on the LCD monitor. (See item 5)Tip: Press and hold the [Timer setting button] for a while, you can reset the timer.
1-4 Presenter Pen 12. [Pen/Mouse mode] switch/Black screen button: Handwriting Mode: If you installed the [New Pen/Mouse Mode], press this button to switch between the [New pen mode], [Penpower mouse mode] and [Mouse mode]. If you installed the [Traditional Mode], press this button to switch between the [Pen mode] and [Mouse mode].Presenter mode: Press this button during the presentation to display the black screen.13. Presenter/Handwriting mode switch: Switch up to the [Presenter mode]. Switch down to the [Handwriting mode].
Chapter 2 Installation and Settings 2-1Chapter 2 Installation and Settings2.1 System Requirements1. Intel Pentium II 300 CPU or above2. 256MB RAM3. 250MB of available hard disk space4. Windows 7/Vista/XP5. USB Port2.2 Handwriting Software Installation1. Please insert CD-ROM disc into the CD-ROM drive and the system will automatically launch setup.exe. Select the “Setup Penpower Jr.” option.
2-2 Presenter Pen 2. Please exit all of the Penpower applications to ensure that the install/repair process will run properly. Select the language version you wish to install then click “Next”.3. Select the installation folder and type. Typical installation is recommended. Besides, Penpower Jr. offers two Writing modes: New Pen/Mouse and Traditional mode. We recommend that you choose to install the New Pen/Mouse mode. If you are an existing Penpower Jr. user and prefer to use the Traditional mode then you may choose to install the Traditional mode instead. The only different between the two modes is the interface, the functions are the same.
Chapter 2 Installation and Settings 2-3Note: If you choose custom installation type, you can check every single function to install, except the functions in grey color.4. Click Next to use the default folder name.5. Click Automatically load Penpower Jr. if you wish to automactically run Penpower Jr. when the computer starts.
2-4 Presenter Pen 7. Penpower Jr. offers various Chinese fonts. You can install DYNA Fonts from the main in-stallation menu. Select the fonts you desire to install, then follow the instruction to install.6. Click “Finish“ to complete the installation.2.3 Hardware Connection1. Open the battery cover of the Presenter Pen hardware and put an AAA battery in.2. Pull the wireless receiver out from the Presenter Pen hardware, and plug it to the USB port of your computer.Tip: If any signal interference, you can connect the wireless receiver to an extension USB cable to avoid the interference equipment.2.4 Run Penpower Jr. Handwriting SystemRun [Start/All Programs/Penpower Jr/Penpower Jr.] to open the Penpower Jr. window.
Chapter 2 Installation and Settings 2-52.6 CalibrationWhen you rst time launch the Penpower Jr., the system will ask you to calibrate the Pre-senter Pen.1. Switch the [Presenter/Handwriting mode switch] downward to the [Handwriting mode].2.5 RegistrationA register reminder window will pop up when you launch Penpower Jr. for the rst time . It reminds you registering your product at http://www.penpower.net/reg.html for ensuring the warranty service. Click [Register now] to register. If you click [Register later], you may go to [About/Register] when you need.2. Click on the top-left corner spot of touch pad by the writing pen.3. Click on the bottom-right corner spot of touch pad by the writing pen.4. Click on [OK] to nish the calibration.Tip : After calibration, the new congura-tion would take effect immediately. You do not need reboot or reload Penpower Jr. handwriting system.2.7 ID Code Matching After you connected the Presenter Pen and launched the Penpower Jr., you should able to write right away. If there is more than two Presenter Pens or wireless devices around you and interference your writing or presentation, you may match your Presenter Pen and your wireless receiver. 1. Please mouse click the Penpower Jr. icon from the lower-left corner and select calibra-tion from the menu to launch the ID code matching function.In the future, if you nd that your handwriting on screen is not on the right location, you need to calibrate your Presenter Pen. Please mouse click Penpower Jr. icon from the lower-left corner and select calibration from the menu to launch the calibration window.
2-6 Presenter Pen 2. Click: Hit the Presenter Pen once.3. Dragging: Hit the Presenter Pen twice quickly, hold and move the pen on the panel while second pen down.4. Double click: It the Presenter Pen twice quickly.5. The left and right buttons are act as the left and right buttons of the mouse.2.8 Mouse Mode Operation1. Moving: Put the pen on the Presenter Pen, and then move it on the panel gently.2. Press the [ID matching] button on the back side of the Presenter Pen.3. An [ID-matching is successful] window appears when the ID matching is done.
Chapter 3 New Pen/Mouse Mode 3-1Chapter 3 New Pen/Mouse Mode3.1 Run Penpower Jr. Handwriting SystemIf you installed [New Pen/Mouse Mode] and run [Start/All Programs/Penpower Jr/Pen-power Jr.], you will see the window as following:Note: Please make sure that you have switched the [Presenter/Handwriting mode] switch down to the [Handwriting mode].
3-2 Presenter Pen 3.2 Switching Modes[New Pen/Mouse Mode] provides New Pen and Penpower Mouse modes. The [New Pen mode] provides writing and recognition functions. You can select the candidates, related words, phrases and symbols via mouse.In the [Penpower Mouse mode], you can use the Presenter Pen and the stylus as the mouse to select the candidates, related words, phrases and symbols. It also provides hand-writing inking review, and some function buttons such as AI, learning tool, phrase, signature and on-line translator.When Penpower Jr. is launched for the rst time, it will display the [New Pen mode]. Left mouse click on the [Menu] button or right mouse click on the toolbar to open the options menu. Select [Penpower mouse mode] to switch to the [Penpower Mouse mode]. In the [Penpower Mouse mode], click on the [Switch] button to switch back to the [New Pen mode].Tip: The second function button on right side of the Presenter Pen allows fast switching between the New Pen mode, Penpower Mouse mode and Mouse mode.New Pen mode Penpower Mouse mode
Chapter 3 New Pen/Mouse Mode 3-33.3 New Pen ModeWhen you run Penpower Jr., the vertical [New Pen mode] toolbar will appear. You can write words on the Presenter Pen to input words. Right click the mouse on the or click menu to open the menu. Double click to close the [New Pen mode] toolbar tempo-rarily. Click and select [Writing mode] to open the [New Pen mode] toolbar.Horizontal Swicth The [New Pen mode] provides vertical and horizontal layout of the toolbar. Click but-ton to select the layout of the toolbar.Menu buttonCandidate wordsMenu buttonSymbol table
3-4 Presenter Pen 3.3.1 Full Screen WritingThere are three different options in the main menu.Single-word writingIt is allowed to handwrite one word only at one time.You can not handwrite the next word until the recognition result of current word has been nished.Two-sides writingAfter the rst stroke is written, one vertical line would be displayed on the center of screen. All the strokes written on the same side would be considered as part of one word. When a new stroke is crossed to the other side, it means that the last word is nished and the next word start to write.Free writingYou can handwrite multiple characters before recognition at one time. Forty one charac-ters at most is allowed. It permits left-to-right,or top-to-bottom free writing order. Remem-ber to keep adequate distance between two contiguous words when you write. It affects the result of character segmentation.The candidate area of the [New Pen mode] provides you to promptly correct the recog-nized words, for example when you wrote ‘蒙’, and it recognized to ‘豪’, you can select ‘蒙’from the candidate area via the mouse.Click the symbols table button via the mouse to open the symbols table and enter the corresponding punctuation symbol.
Chapter 3 New Pen/Mouse Mode 3-53.3.2 How to WriteIt would be better to keep strokes of the same word closed, and do not overlap between words when you write. You need to nish writing every strokes of one word.Right example Write three words of 『明日月』.Wrong example 1 Overlap between two words. All the strokes may be recognized as one word.Wrong example 2The two parts of one word are written far away from each other. All the strokes may be segmented into two words.Auto Phrase CorrectionThe system automatically proofreads on your writing content to improve the recognition rate. For example, when you continuously write『天下太平』 four characters, but the char-acter『天』is incorrectly written as『夫』, so they become『夫下太平』. Penpower uses its internal phrase dictionary to correctly recognize your intended result『天下太平』.
3-6 Presenter Pen 3.3.3 How to Quickly Correct, Enter Phrases and SymbolsWhen writing, candidate words based on the previous input will be displayed on the [New Pen mode] toolbar. Each press of the left function button on the Penpower Jr. will move the candidate words forward by one and also correct the results. Alternatively, select a candidate word on the [New Pen mode] toolbar to correct it. Click the [Symbol table] button with the mouse to open the [Symbol table] and enter the corresponding punctuation symbol; the right function button of the Presenter Pen provides the same symbols.You can also press the second function button on right side of the Presenter Pen to switch to the [Penpower Mouse mode]. In the [Penpower Mouse mode], you can select the candi-date word, post-related word, phrase or symbol. For example: In [New Pen mode], the input『蒙恬科技』had the character『技』mis-read as『投』. You can press the second function button on right side of the Presenter Pen to switch to the [Penpower Mouse mode] then choose from the candidate words eld『技』to correct the mistake. Once corrected, press the second function button on right side of the Presenter Pen to switch back to the [New Pen mode] and continue writing.Function ButtonHandwriting InkingPhraseSymbolCandidate wordsPost-related wordSymble Key
Chapter 3 New Pen/Mouse Mode 3-73.4 Balloon UIThis unique user interface let you edit recognition result freely in any application. The visual user interface is hidden transpar-ently. When you want to correct some word, just hover your mouse over this word for a few seconds. The [Balloon toolbar] will dis-play on the cursor position.Tip : To display the [Balloon toolbar], you do not need to press any button, just hover your cursoe on the word you want to correct.In the [Balloon toolbar], click candidate words, the AI button , the homophone , the pre-related word , the post-related word or the phrase correction to correct your result. Click the button to see the raw image of your strokes. Click the button to open the tutor. Click the button to input punctuation symbol. Click the button to split one word. Click the button to merge one word with next. The is to activate the Chinese-English translation function. Details about this function are provided further on in the manual. Note: In the [New Pen/Mouse mode], the [Balloon toolbar] can only be operated with the computer mouse.Note: [Balloon toolbar] can be used in Ofce, IE, WordPad, but in Windows XP and Vista 64 bit systerms, it can not be used in some software, except NotePad.
3-8 Presenter Pen 3.4.1 Phrase Correction If you wish to enter a common phrase such as an idiom, and you are not sure of how to write one of the characters you can substitute a similar sounding character instead. If you are not sure of the character’s pronunciation either, choose any at random. When you have nished writing the phrase, select the uncertain character with the mouse then click on the phrase correction button. The system will examine the four characters before or after this particular character to guess what you meant and make the change.1. If you wamt to inputting an idiom such as『拔苗助長』, and you are not sure of how to write the character『拔』, you can write the character『一』instead to input『一苗助長』.2. Hover your mouse over the character『一』and wait for a moment to display the [Balloon toolbar]. Click the phrase correction button and the『一』char-acter will be changed to『拔』.3. If the phrase correction function came up with multiple candidate words, these will be shown in the candidate words window for you to choose from. For example, if the input was『股份一限公司』when you hover your mouse cursor on the『一』character to display the [Balloon toolbar]. Pressing the phrase correction button will bring up a list of all phrase correction candidate words for you to choose and make the correction with.4. Click the character you want to input from the the list.
Chapter 3 New Pen/Mouse Mode 3-92. For example you wrote『蒙恬科技』, but『恬』is wrongly recognized as『恰』.3. Hover your mouse over the word『恰』for a while to display the [Balloon tool-bar].4. Click the candidate word if the correct word is there.5. Otherwise click the AI button to open the AI correction dialog.6. Input the correct word『恬』, and then click [OK].7. You will see the wrong result『恰』 is already updated as『恬』. Your personal writing style has also been learned.3.4.2 Articial IntelligenceWhen you use candidate word or AI button to correct result, the system will modify its recognition database to adapt your personal writing style to improve the recognition rate.1. Write some words. The result would be sent to your cursor location. Tip: You can also press the second func-tion button on right side of the Pre-senter Pen to switch to the [Penpower Mouse mode]. If the correct word appears among the candidate words, simply click on it to make the change. If the correct word is not among the candidate words, press the [Penpower AI] button to open the AI dia-logue eld to train the software.
3-10 Presenter Pen 3.4.3 SplitWhen two words are written too close, they may be recognized as a single word. You can use split function to separate it into two words.1. For example, when you write four words『日月星辰』. 2. If『日』and『月』were written too close, you may wrongly get three words of result『明星辰』.3. Hover your mouse over the word 『明』for a while to display the [Balloon tool-bar].4. Click button to separate 『明』into『日』and『月』.3.4.4 MergeWhen some strokes of one word are written far away from each other, the system may recognized it as several words. You can use merge function to combined them into one word.1. Write two words『棟樑』, the recogni-tion result will be sent to the cursor loca-tion.2. If『木』and『東』is written far away from each other, you may wrongly get three words of result『木東樑』.3. Hover your mouse over the first word『木』for a while to display the [Balloon toolbar].4. Click button to merge『木』and『東』into『棟』.Note : Only two continuous words could be merged at one time.
Chapter 3 New Pen/Mouse Mode 3-113.4.5 HomophoneIf you forget how to write some words, or the words are too complicated to write, you can write down some other easy homophone to get the word that you would like to input. e.g. If you want to input the word『豫』:1. Write any homophone of『豫』, e.g.『玉』. 2. Hover your mouse over the word『玉』for a while to display the [Balloon tool-bar].3. Click button to open the window of homophone words.4. You can click / / button to toggle other Zhuyin homophone/Cantonese homo-phone/Hanyu homophone.5. Click『豫』to replace『玉』.
3-12 Presenter Pen 2. Hover your mouse over the word『恰』for a while to display the [Balloon tool-bar].3. Click button to open the window of pre-related phrases. If the correct phrase 『蒙恬』is in the list, click it to update the result.4. Hover your mouse over the word『料』for a while to display the [Balloon tool-bar].5. Click button to open the window of post-related phrases. If the correct phrase『科技』is in the list, click it to update the result.6. You will see the wrong result『蒙恰料技』is already updated as 『蒙恬科技』at last.3.4.6 Related wordFor any two contiguous words, the rst one is the pre-related word of the second one. The second one is the post-related word of the rst one. e.g.『科技』, 『科』is the pre-related word of『技』, and『技』is the post-related word of『科』.1. Write some words. The result would be sent to the cursor location. If 『恬』 is wrongly recognized as『恰』, and『科』is wrongly recognized as 『料』.
Chapter 3 New Pen/Mouse Mode 3-133.5 Penpower Mouse ModeThe following will introduce the function buttons of the [Penpower Mouse mode], such as Articial Intelligence, learning tool, phrase, signature, on-line translator and settings.3.5.1 Articial IntelligenceWhen writing a word in the [New Pen mode], you can push the middle button for switch-ing to the Penpower Mouse mode. You can click [Articial Intelligence function] to adapt your personal writing style. Please refer to 3.4.2 for details.3.5.2 Learning StringA string is represented by a single symbol. You can write the symbol anytime and the rec-ognition engine will recognize it as the entire string, minimizing needless writing.1. In Penpower Mouse mode, click the Learning Tool button and click Learn String. The Learning Tool dialog box displays.2. Enter the string you want to learn, then click Start.
3-14 Presenter Pen 3. Write your symbol twice according to the instructions.4. Click the [Manage DB] tag. You can browse though the animated symbols for strings or any of the strings you have assigned a symbol to.
Chapter 3 New Pen/Mouse Mode 3-153.5.3 Update Phrase DatabaseThere are thousands upon thousands default phrases that you can use in the Penpower handwriting recognition. It also allows you to customize the phrase database to meet your needs.1. In [Penpower Mouse mode] press the [Phrase] button. Or in [New Pen mode] select [Edit Phrase] from the Associations Dictionary and open the [phrase] dialogue. 2. Click [Insert] to open the [Phrase Input] dialog. You can input a new phrase here. e.g. If you want to insert『一不做二不休』as a phrase, input『一不做二不休』.You need to update the phonetics on the right side. Click / button to hear their pronunciation and check if the one you choose is right.Note : The maximum length of one phrase is 200 word. In fact, the phonetics is only for VoiceReader to read text with right sound of phonetics. If you do not care, you can skip it.Click [OK] to nish insertion. Afterward, if you write『一』, then『一不做二不休』would be displayed in the related phrase window. Just click it to input.
3-16 Presenter Pen 3. Selet on phrase from the list, and then click [Modify] to update the phonetics of this phrase. Click [Delete] to delete this phrase from database.4. In [Search string] eld, you can only input part of a phrase to nd this phrase quickly.5. You can use [New], [Open], [Save], [Save As] function to manage your phrase database (*.yib).Note: Although you can create several phrase database, you can only choose one at one time.6. Import leClick [Import] and select one phrase database(*.yib) or text le to import it into current database.The text le format must follow this rule - one phrase in each line. You can edit it by any editor, e.g. NotePad.Note: Every imported phrase would own phonetecs by default. Their phonetics may be wrong. You can modify them from phrase dialog.
Chapter 3 New Pen/Mouse Mode 3-173.5.4 Signature1. Move the cursor to where the signature will be.2. Open the [Penpower Mouse mode] and press the [Signature] button. The [Signature tool-bar] screen will be shown. 3. In signature mode, the left button is dened to change color. : Select the color of inking. : Select the thickness of inking. : Select the pen style. : Clear all. : Undo one stroke. : Redo one stroke.4. Click button to cancel signature.5. Click button to insert your signature at the position of your cursor.6. Click button to overlap your transparent signature with MS Word or MS Excel document.
3-18 Presenter Pen Note: You can use the transparent signature in the latest version of Word and Excel, but Ofce 2007 does not support this function. You may make notes and commentary by using the transparent signature feature.3.5.5 Online Translator1. Open the [Penpower Mouse mode] and press the [Online Translator] button to open the Online Translator function. Press the button again to close the function. When reading English or Chinese articles, if you encounter unknown characters or phras-es, Hover your mouse over the characters, and a translation window pops up to explain them for you.When you move your mouse outside the interactive scope, the window will disappear. In the window, you can press the play button or character / or phrase explanation buttons.
Chapter 3 New Pen/Mouse Mode 3-19The [Online translator] is used in the balloon interface. When you want to look up a char-acter’s translation, select button from the candidate window.
3-20 Presenter Pen 3.5.6 Input Words by Related PhrasePhrase function provides the related phrases for inputting phrases quickly.1. Write down the rst word of one phrase. e.g. If you want to input the phrase『一年四季』, just write the rst word『一』.2. Press the second button on the right side of the Presenter Pen to swicth to the Penpower Mouse mode. All the phrases beginning with this word『一』will be listed on the phrase area of the Penpower Mouse mode.3. Click the phrase or memorized word that you want to send it into the caret. e.g.『一年四季』.
Chapter 3 New Pen/Mouse Mode 3-213.6.1 Recognition SettingModeThe recognition mode of Chinese, English, Numeral, Symbol and Japanese could be turned on/off individually. You could turn on several modes at the same time.Recognition1. Simplied character: All of the results are in Simplied Chinese. If you do not know how to write traditional words, you can deselec [Traditional to Simplied] so your writing is not recognized incorrectly as Traditional Chinese.Note: [Traditional to Simplied] option is available only when you switch to simplied version. 2. Traditional character: All of the results are in Traditional Chinese.3. Traditional+Simplied: You will get traditional words while using traditional writing, and you will get simplied words while using simplied writing. 3.6 SettingsIn [Penpower Mouse mode] click on the [Setting] button or in [New Pen mode] choose the [Setting…] from the menu to open the settings page. You can congure the recognition engine, output format or writing inkings here.
3-22 Presenter Pen Unusual characterThe system will recognize some unusual words only when you turn on [Unusual charac-ter] option.Running HandSelect this option to recognize run-on cursive. Hongkong CharacterThis recognition mode is available only when the Penpower Jr. set to [BIG5] or [BIG5+HK]. You can connect to http://www.microsoft.com/hk/hkscs/default.aspx to check the Hongkong characters list.
Chapter 3 New Pen/Mouse Mode 3-233.6.2 General SettingHalf shape/Full shapeTo decide whether the handwriting result of alphanumeric is recognized as one-byte ASCII code or double-bytes code.Auto loadStart Penpower Jr. when Windows starts.DirectionYou can select the orientation of the Presenter Pen as Horizontal or Vertical. The Hori-zontal provides right-handed and left-handed choices.SoundPronounce the character in Mandarin or Cantonese immediately after recognition.
3-24 Presenter Pen 3.6.3 Writing SettingInk color Select the color of inking. You can ad-just the smoothness of color gradation when selecting [Multiple].Ink widthSelect the thickness of inking.Ink sound Select the sound effect while writing.Pen style Select the pen style.SpeedSelect the writing speed. The less the relative value is, the shorter the timeout for recogni-tion after you’ve stopped writing.
Chapter 3 New Pen/Mouse Mode 3-253.7 Writing ApplicationThe following will introduce the function of Writing Application, such as Switch Version, Gesture, Mix Traditional and Simplied Writing, and Using Penpower Jr. in MSN Messen-ger.3.7.1 Switch Version1. In [Penpower Mouse mode], click Penpower Junior options, then click [Version…].2. For the Win2000/XP/Vista operating systems for Traditional Chinese, Traditional Chinese (Hong Kong) or Simplied Chinese, the output of the handwriting recognition is always encoded using Unicode. If, after switching versions, you cannot see the message displayed correctly at the bottom of the dialog box, your Windows operating system may not support the version you chose.3. Select [Use English Message] to display all of the messages in English.
3-26 Presenter Pen 3.7.2 GesturePenpower Jr. supports four standard writing gestures. You can write these gestures to per-form certain keyboard actions.1. Delete : simulate the DELETE key. 2. Backspace : simulate the BACKSPACE key. 3. Enter : simulate the ENTER key. or 4. Space : simulate the SPACE key. 3.7.3 Mix Traditional and Simplied WritingNo matter what characters you write, just set the recognition engine to determine whether the output is shown as Traditional or Simplied Chinese. See 4.6.1 for more details.You can mix writing traditional and sim-plified Chinese words. For example, you can write the two words『書寫』.
Chapter 3 New Pen/Mouse Mode 3-273.7.4 Using Penpower Jr. in MSN MessengerNote: This required MSN Messenger version 6.1 or higher version.After you have signed in to the MSN Messenger, double-click the person’s name to display the conversation box. Below this conversation box, there are two modes for you to select: [Handwrite] and [Type] . You can switch between the input modes as you like.Note: If you can’t activate the New Pen mode, please visit the Microsoft website and in-stall the necessary handwriting. In the [Handwrite mode], you can adjust the font size and the font color. When done, you can write on the tablet and the words will appear in your selected font size and color.If you want to clear the words you have written, you can use the eraser shown in the scroll bar.After you have input your message, click [send] to send your handwritten message.
3-28 Presenter Pen set ink width set ink color set the rubber
Chapter 4 Traditional Mode 4-1Chapter 4 Traditional Mode4.1 Run Penpower Jr. Handwriting SystemIf you installed [Traditional Mode] and run [Start/All Programs/PenpowerJr/Penpower Jr.], you will see the Traditional Handwriting window.4.2 Writing ModeThere are two kinds of writing modes. One is [Full-Screen] mode, the other one is [Writ-ing-Pad] mode. You can click the button to toggle these two writing modes.Note: Please make sure that you have switched the [Presenter/Handwriting mode] switch down to the [Handwriting mode].
4-2 Presenter Pen There are three different options of full screen mode in the main menu, Single-word writing, Two-sides writing and Free writing. Please see Chapter 3.3.3 for more details.4.3 Full Screen Handwriting4.3.1 Balloon UIThis unique user interface let you edit recognition result freely in any application. The visual user interface is hidden transparently. When you want to correct some word, just move the cursor position on this word for a while. The function tool bar will be popped up there where the cursor is.Please refer to Chapter 3.4 for more details.
Chapter 4 Traditional Mode 4-3You need to click the second button on the right side of the Presenter Pen or click on the writing area switching into Pen mode before you start writing. The color of writing area will change from gray into yellow.The left button would be revised for replacing the recognized word by the next candidate word on pen mode. While you press the left button once each time, the latest recognized result would be replaced with the next candidate word. It lets you correct the result quickly without switching to mouse mode.Click the second button on the right side of the Presenter Pen or click on the writing area again to switch into mouse mode. The color of writing area will change from yellow into gray.Tip: The writing-pad adopts shrink-expand user interface. It would expand into normal size when the cursor move on it. Otherwise it will shrink as an small icon to avoid occupying the screen.4.4 Writing-PadThere are five input tools in Writing-Pad: Write, Phonetic, Keyboard, Dictionary and Symbol.4.4.1 Write Input ToolWriting AreaSymbolCandidateRelated PhraseTitle bar
4-4 Presenter Pen 4.4.2 Phonetic Input ToolThere are three types of phonetic input tool: Zhu yin, Cantonese and Han pin by default. You can create your own phonetic input tool.How to Use1. Select one phonetic input tool of Zhu yin, Cantonese, Han pin or others.2. Click the phonetic button one by one in order.3. The converted candidate character would be listed in the text buffer.4.4.3 Keyboard Input ToolKeyboard Simulated software keyboard.Inner CodeFor example, the inner code of [☆] in hexidecimal is A1EE. Click [A], [1], [E], [E] button one by one in order,and then get [☆].4.4.4 Dictionary Input ToolQuery by radical
Chapter 4 Traditional Mode 4-54.4.5 Symbol Input ToolThe special symbols are grouped into multiple pages of table. Select the suitable table and click the symbol what you want to get. It allows you to customize the symbol tables.Query by stroke
4-6 Presenter Pen 2. Write down the rst word of one phrase. e.g. If you want to input the phrase『一方面』, just write the rst word『一』.3. All the phrases beginning with this word『一』will be listed on the top.4. All the memorized words you have ever written right following this word『一』will be listed on the bottom.5. Click the phrase or memorized word that you want to send it into the caret. e.g.『一方面』.4.5 Phrase 4.5.1 Use Phurase to input words1. In both the Full Screen and Writing-Pad modes the Associations dictionary window will always be displayed.Note: In the Full Screen Handwriting mode, if the Associations dictionary is closed, select “Open Related Phrase” from the menu to reopen it.
Chapter 4 Traditional Mode 4-74.5.2 Update Phrase DatabaseThere are thousands upon thousands default phrases that you can use in the Penpower handwriting recognition. It also allows you to customize the phrase database to meet your needs.1. Open the Penpower Jr. main menu and select [Open Related Phrase]. Then select [Edit Phrase] from the Phrase menu to open the [Edit Phrase] diolague to edit the dictionary. 2. Click [Insert] to open the phrase input dialog. You can input a new phrase here. Please see Chapter 3.5.3 for more details.
4-8 Presenter Pen 4.6 Other Functions4.6.1 Learning ToolSelect the [Learning Tool] from the main menu to open the Learning Tool diolague.Please see Chapter 3.5.2 for more details.4.6.2 SignatureMove the cursor to where the signature will be. Then select [Signature] from the main menu to open the [Signature] window, and enter to the signature mode.Please refer to Chapter 3.4.4 for more details.4.6.3 On-Line TranslatorSelect [Online Translator] from the main menu to open the Online Translator function. Select again to close the function.Please refer to Chapter 3.5.5 for more details.
Chapter 4 Traditional Mode 4-94.6.4 SettingsIn Penpower Jr.’s options menu select [Settings] to open the settings page. You can con-gure the recognition engine, output format or writing tracks here. For more details on Pen-Power settings please refer to the explanation provided in Chapter 4.6. The only difference is that in Traditional mode the writing pad display can be congured here.Please switch to the [General] setting page and in the [Display] area you can choose whether to display the window title and the buffer area. Title barShow/hide the caption of writing-pad.BufferShow/hide the text buffer of Writing-pad. If the buffer is displayed, all the recognition result would be put here. After the buffer is full, the rst word would be popped out into the caret. You can also click button to force all the result popped out and clear the buffer any-time. If the buffer is hidden, the recognition result will be send to the caret directly.Title bar Buffer
4-10 Presenter Pen 4.6.6 GesturePenpower Jr. handwriting system supports four standard writing gesture. You can hand-writing these gestures to perform certain keyboard actions.Please see Chapter 3.7.2 for more details.4.6.7 Mix Traditional and Simplied WritingYou can mix writing traditional and simplified Chinese words. Whatever you wrote, choose different recognition engine to decide the results being traditional or simplified words.Please see Chapter 3.7.3 for more details.4.6.8 Using Penpower Jr. in MSN MessengerIf you have installed MSN Messenger version 6.1 or higher and Penpower Jr., you can use Presenter Pen to input or draw in the MSN Messenger.Please refer to Chapter 3.7.4 for more details.4.6.5 Switch VersionOpen the main menu. Select [Version...]. There are three Versions for Choose. Please see Chapter 3.7.1 for more details.
Chapter 5 Presenter Mode 5-1Chapter 5 Presenter ModeThe Presenter Jr. supports MS PowerPoint presentation application to make your presen-tation more professional. You may switch the [Presenter/Handwriting mode] switch upward to the the [Presenter mode] and use the following functions to help your presentation.1234Front Side Right Side1. Left button: Show the previous page.2. Right button: Show the next page.3. Laser point button: Press the laser point button to highlight the main points in your presentation with the red laser light.4. Mouse area: When pull the stylus out, you can use this area as a mouse pad to move your cursor, click and double click the mouse area.Note: If you do not need to use the mouse function during the presentation, please do not pull the stylus out to avoid activating the mouse in the dark.5. Timer setting button: Let you set the presentation time. Press it once, add 5 minutes and so on. After 5 second of setting, the Presenter Pen will start to count down. The LCD monitor will display the remaining time, and alarm you at 2, 5 minutes left and time is up with the gentle red ash.567
5-2 Presenter Pen Tip: Press and hold the [Timer setting button] for a while, you can reset the timer.6. Black screen button: During the presentation, press the black screen button to display the black screen.7. Presenter/Handwriting mode switch: Switch upward to the the [Presenter mode]. Switch downward to the the [Handwriting mode].
Chapter 6 Assistant Tools 6-1Chapter 6 Assistant ToolsIf you selected the [Typical] or [Custom] type during the installation, you will nd Pen-power VoiceReader, Penpower Translator and Penpower Input Tool. In the Custom type, you could select the functions to install.
6-2 Presenter Pen 4. During reading, click , and select [Start/Stop Text Speech], it will stop reading.2. When it starts up, there will be an icon on/off button on the top right corner of your application, such as Word. You can select Mandarin or Cantonese.3. When you choose a paragraph, click the button and select [Start/Stop Text Speech], the selected paragraph will be read out. Check your speaker if there is no sound. 6.1 Penpower Voice ReaderThe Penpower Voice Reader utilizes a state of the art text-to-speech technology, it will read in uent Mandarin or Cantonese of any articles. You can use it as a tool for fast proof-reading or in teaching the correct Mandarin/Cantonese pronunciation.6.1.1 Use Penpower Voice Reader1. Run [Start/All Programs/Penpower Jr/Penpower VoiceReader].Note: Before running the Penpower Input Tools, make sure the Penpower Jr. has been started. Otherwise you’ll be asked to start the Penpower Jr. rst.5. Click , select [Exit] to exit the Penpower Voice Reader.
Chapter 6 Assistant Tools 6-36.1.2 Reading Setting1. Click , select [Setting], the [Setting window] will appear.Speech Speed: Adjust speech speed. Speech Pitch: Adjust speech tone level. Speech Volume: Adjust speech volume.
6-4 Presenter Pen 6.2 Penpower TranslatorThe Penpower Translator provides Chinese to English and English to Chinese word and sentence translation.Run [Start/All Programs/Penpower Jr/Penpower Translator].Note: Before running the Penpower Input Tools, make sure the Penpower Jr. has been started. Otherwise you’ll be asked to start the Penpower Jr. rst.6.2.1 English Words1. Click the button [En. -> Ch.] on the left side of window.2. In the input eld on the upper left corner, enter an English word, press [Enter] key to see the Chinese translation.3. Choose different tabs on the top of the translation eld to look up the Dene, Variation, Idiom and Analysis of the English word.
Chapter 6 Assistant Tools 6-56.2.2 Chinese Characters1. Click the [Simplied.Ch. -> En.] button on the left side window.2. In the input eld on the upper left corner, input a Chinese character or phrase, and then press [Enter] key to see the English translation.Tip: If the Chinese character you want to look up is Traditional Chinese, please select the [ Traditional Ch. -> En.] translation option.6.2.3 English Chinese Sentence Translation1. Click the [Sentence En. -> Ch.] button on the left side of the window.2. In the upper input frame, input English sentences or an article, click the button to translate. The translation results are shown on the lower frame.Tip: When you translate a whole article, make sure there’s a period mark at the end of each sentence. It will increase the accuracy of translation.
6-6 Presenter Pen 6.2.4 Chinese English Sentence Translation1. Click the [Sentence Simplied Ch. -> En.] on the left side of window.2. In the upper input frame, input Chinese sentences or an article, click the button to translate. The translation results are shown on the lower frame.Tip: If the Chinese sentence you wish to look up is Traditional Chinese, please select the [ Sentence Traditional Ch. -> En.] translation option.6.2.5 Button Functions Speech: Hear the pronunciation of the single character/word. If you use [Sentence Translation], click on the upper or lower frame, and then clcik the button to hear pro-nunciations of the whole sentences or the article./ Previous/Next: Look up the denitions for nearby words. Cut: Cut the selected content. (Only available when translating an entire sentence) Copy: Copy the selected content. Paste: Paste the cut or copied content. (Only available when translating an entire sen-tence) Delete: Delete all input and translation content. (Only available when translating an en-tire sentence) Save: Press button to open the [Save as…] dialogue window. This will save all of the input and translated content into a new *.txt format le. (Only available when translat-ing an entire sentence.)
Chapter 6 Assistant Tools 6-7Tip: When typing a single word, a list of possibe word will show up during the typing. You can use the direction keys to select that word as the input, and then press Enter key to look up that word.
6-8 Presenter Pen 6.3 Penpower Input ToolThe new Handwriting mode provides Penpower Input Tool. In the Traditional mode, this function includes in the Writing-Pad.It contains four input methods: Phonetic, Keyboard, Dictionary, and Symbol. Run [Start/All Programs/Penpower Jr/Penpower Input Tool].Note: Before running the Penpower Input Tools, make sure the Penpower Jr. has been started. Otherwise you’ll be asked to start the Penpower Jr. rst.6.3.1 Phonetic Input ToolThere are three types of phonetic inputs provided by the Penpower Jr.: Zhu yin, Yue Pin and Han pin. You can also create your own phonetic input.How to Use1. Select a phonetic input: Han pin, Yue Pin or Zhu yin.2. Click the screen keyboard buttons one by one in order.3. The converted candidate character is listed in the text buffer.Tip: The writing-pad adopts shrink-expand user interface. It would expand into normal size when you hover your mouse over it. Otherwise it appears as a small icon to avoid taking up space on the screen.
Chapter 6 Assistant Tools 6-96.3.2 Keyboard Input ToolKeyboardSimulated software keyboard.Inner CodeSelect four keys of inner code to input a character or symbol. e.g. The inner code of [☆] in hexadecimal is A1B8. Click A 1 B 8 in that order in the screen to display [☆].6.3.3 Dictionary Input ToolQuery by radicalQuery by stroke6.3.4 Symbol Input ToolSpecial symbols are displayed on several tables. Select a table and click the desired symbol. You can customize the symbol tables.
Chapter 7 Fast User Switching 7-1Chapter 7 Fast User SwitchingThe Penpower Jr. supports [Fast User Switching] when you have more than one user account in Windows OS. [Fast User Switching] allows all users to use Penpower Jr. without reinstalling on each account.For example, to activate [Fast User Switching] from Windows XP, click the [Start] button, select [Settings] then click [Control Panel]. Select [User Accounts] and then click [Change the way users log on or off]. Select [Use the Welcome screen] and [Use Fast User Switching] and then click [Apply] Options.The Penpower Jr. will work now no matter which account is used to log in.

Navigation menu