Acrox Technologies OPWISMMU01 2.4GHz Optical Mouse User Manual 410 1098 006B AMW25AP 07Aug31 full

Acrox Technologies Co., Ltd. 2.4GHz Optical Mouse 410 1098 006B AMW25AP 07Aug31 full

Manual

USER GUIDEFeatures and specifications are subject to change without notice. All trademarks are the property of their respective owners © 2007, Targus Group International, Inc. and Targus, Inc. Manufacturer / Importer: Unit 1202-07, 12/F, Tower 2, Metroplaza, No. 223 Hing Fong Road, Kwai Fong, N.T. Hong KongAMW25AP / 410-1098-006B302.4GHz Optical MouseModel Name MA5
2.4GHz OPTICAL MOUSE IntroductionCongratulations on your purchase of the 2.4GHz Optical Mouse Notebook Mouse. This mouse features a tracking resolution switch users who require more precision or speed with various applicationThe Stow-N-Go receiver clips onto the mouse for ease of use which traveling or on the go. This mouse also features a 4-way scrollingwheel which allows for both vertical and horizontal navigation.• Hardware - USB port• Windows® 2000/XP• Windows Vista™• Mac OS X 10.2.8 (or greater)System Requirements2
Installing the Batteries2. Insert two AA-size batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment. To replace the battery cover, place the cover on top of the mouse and slide forward until it clicks into place.NOTE: WHEN THE BATTERY IS LOW, THE LOW POWER INDICATOR LIGHT LOCATED IN THE DPI SWITCHING BUTTON WILL FLASH RED. PLEASE REPLACE WITH TWO NEW AA-SIZE BATTERIES.1. Remove the battery cover from the back of the mouse by sliding off the cover of the mouse. Hold the mouse in your hands and with the back of the mouse away from you. Press down on the corners of the battery cover and slide towards the back of the mouse. Lift the cover off from the back of the mouse.When power is on, the mouse goes into "sleep mode" after 8 minutes of inactivity. To activate the mouse, press any mouse key.DPI switchingbutton3
(A) Remove the USB receiver from the bottom of the mouse. This will activate the on/off switch.Establishing the Connection(B)(A)(C)(D)(B) Plug the USB receiver into an available USB port on your computer.(C) Press and release the setup key on the receiver.(D) Press the setup key on the bottom of the mouse.This device has 256 identification codes that allow the mouse and its receiver to operate without interference from other radio frequency devices. If you experience interference during use, repeat steps C and D to change the connection channel.NOTE: TO TURN THE MOUSE OFF, SIMPLY PLACE THE USB RECEIVER BACK INTO THE STORAGE SLOT. THIS WILL MAXIMIZE BATTERY LIFE WHEN NOT IN USE.4
This mouse is equipped with a 4-way scrolling function.Installing the tilt-wheel software driverTo enable the tilt-wheel function, the software driver must be installed. NOTE: PLEASE SELECT THE "3 BUTTON MOUSE" OPTION WHEN PROMPTED TO DO SO.2. The Installation Wizard window will prompt.Follow the on-screen instructions to complete the installation. After the software driver is successfully installed, there will be a “Tilt Mouse” icon located in the task bar.NOTE: THE TILT-WHEEL FEATURE IS SUPPORTED BY THE MAC OPERATING SYSTEM. NO DRIVER INSTALLATION IS NECESSARY. THE FOLLOWING STEPS ARE FOR WINDOWS OPERATING SYSTEMS ONLY.1. Please download the software driver (Model # AMW25) from the official Targus web site: http://www.targus.comSave the setup.exe file to your computer and double click on the icon to launch the installation process.5
Pressing the scroll-wheel left or right, enables the horizontal scrolling feature.Using the 4-way scrolling tilt-wheelNOTE: DOUBLE CLICK ON THE “TILT MOUSE” ICON IN THE TASK BAR WILL LAUNCH THE MOUSE SETTINGS SCREEN. YOU CAN EDIT THE SETTINGS AND PREFERENCES IN THIS WINDOW.Activating the Universal Zoom functionThe Universal Zoom function can be enabled in the MouseSetting screen.In the Mouse Setting screen, under the Button tab, scroll down the function list and select the Universal Zoom function then click Apply.Press on the scroll wheel to activate the zoom function.6
Windows XPWindows XP:After selecting the desired resolution, you can also fine tune the sensitivity. This can be adjusted in the “control panel” of the Windows operating system.Click on Start --> Setting --> Control Panel --> MouseIn the “mouse properties” window, locate the “pointer options” tab. Under “motion”, use the slider to change the speed of the mouse. Click apply to confirm the changes.Adjusting the DPI SettingThis mouse features 3 selectable resolution settings (1600 / 1200 / 800 DPI). By pressing the resolution switch, you can instantly adjust the tracking speed of the mouse. When the DPI is set at 1600, the indicator light will glow brightest and when it is set at 1200, the light will become dimmer. The indicator will be off when the DPI is set at 800 DPI. The setting will be saved when the mouse is turned off. The indicator light will shut off in 10 seconds after selecting the desired resolution.1600 DPI1200 DPI800 DPI7
TransmitterReceiverRF • 2.4GHzInterface • USB 1.1Power • USB Bus Powered 5V DCProduct SpecificationRF • 2.4GHzBattery Type • Alkaline battery AAEffective RF Communication Range • 1.2 meters maxRF output Power • 1mW maxPower Consumption • 15mA maxThis mouse is equipped with the latest sensor technology that conserves power and provides up to six months of battery life. Battery life is determined using one hour of continuous use, five days per week.Mac OSMac OS:After selecting the desired resolution, you can also fine tune the sensitivity. This can be adjusted in the “System Preference” of the Mac operating system.Click on the Apple logo --> System Preference --> Keyboard & MouseIn the “Keyboard & Mouse” window, locate the “Trackpad” tab. Under “tracking speed”, use the slider to change the speed of the mouse.8
Regulatory ComplianceThis device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may notcause harmful interference, and (2) This device must accept anyinterference received, including interference that may causeundesired operation.FCC StatementTe s t e d t o C o m p l yThis equipment has been tested and found to comply with thelimits of a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequencyenergy and if not installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna;• Increase the separation between the equipment and receiver;• Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected;• Consult the dealer or an experienced radio/TV technician forhelp.Declaration of ConformityHereby, Targus Group International, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Changes or modifications not authorized by the party responsible for compliance could void the user’s authority to operate this product.Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are the properties of their respective owners. All rights reserved.9

Navigation menu