Acrox Technologies KB08 Wireless USB Keyboard User Manual DX WLC1401 12 1183 QSG V1 EN ai

Acrox Technologies Co., Ltd. Wireless USB Keyboard DX WLC1401 12 1183 QSG V1 EN ai

Users Manual

)0&7^6%5$4#3@2!1`AltAltCtrlShiftEnterCapsLockOU]16Pg Up98/Tab }EnterDelPg DnEndHomeNumLockBackspace~{[(ShiftCtrlDX-WLC1401Wireless Keyboard and Mouse ComboPackage contents• Wireless keyboard• Wireless mouse and nano receiver• Quick Setup GuideSystem requirements• Windows® 8, Windows® 7, Windows Vista®, or Windows® XP • One available USB portFeaturesQUICK SETUP GUIDEInstalling the keyboard batteries1 Take the battery cover o.Troubleshooting• Make sure that your computer meets the system requirements.Installing the mouse batteries and removing the nano receiver1 Take the battery cover o.2 Remove the nano receiver. 3 Insert the batteries as shown inside the battery compartment.4 Replace the cover.Caution: Insert the battery with the correct orientation, according to the instruction label on the mouse.AAA battery × 2 Keyboard buttonsMedia player hot keysradioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.”This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Connect buttonON/OFF switchBattery coverNano receiverLeft buttonRight buttonScroll wheelLEDindicatorMouse indicatorBefore using your new product, please read these instructions to prevent any damage.AAA batteriesandPullLED indicator# Icon Function1 Play/Pause2 Stop (Media)3 Previous4 Next5 Volume down (Voice-)6 Volume up (Voice+)7 Mute8 Calculator9 LED indicator10 Connect button11 Battery coverDescriptionSwitch between playing and pausing media.Stop playing the media in the media player.Switch to the previous media track.Switch to the next media track.Decrease the computer’s sound volume.Increase the computer’s sound volume.Mute (turns o) the computer’s sound.Start Microsoft calculator.Low battery and pairing indicator.Press to initiate pairing with your computer.Remove to install or replace the batteries.)0&7^6%5$4#3@2!1`AltAltCtrlShiftEnterCapsLockOU]16Pg Up98/Tab }EnterDelPg DnEndHomeNumLockBackspace~{[(ShiftCtrlDX-WLC1401_12-1183_QSG_V1_EN.ai 1 1/9/2013 5:46:10 PMDX-WLC1401_12-1183_QSG_V1_EN.ai 1 1/9/2013 5:46:10 PMV1FINALFOR PRINT
QUICK SETUP GUIDEInstalling the keyboard batteries1 Take the battery cover o.2 Insert the batteries as shown inside the battery compartment.3 Replace the cover.Setting up the connection between the nano receiver, mouse and keyboard1 Plug the nano receiver into the USB port on your computer.2 If the mouse or keyboard does not work, do the following: Re-plug the nano receiver into the USB port on your computer, then press the connect button on the mouse and keyboard. If the mouse or keyboard does not work after 10 seconds, pair them again by pressing the connect button on the mouse or keyboard. (The receiver has auto-pairing function).3 The LED indicator on the mouse and keyboard ashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver. 4 When the battery gets low, the battery indicator on the mouse or keyboard will start to blink.Troubleshooting• Make sure that your computer meets the system requirements.• Only use the mouse on a clean, at, non-slippery surface to ensure smooth and accurate cursor action.• Avoid using your mouse on reective, transparent, or metallic surfaces.• If your mouse or keyboard stops working: • Make sure your mouse or keyboard and nano receiver are paired by pressing the connect button on the mouse or keyboard. • Replace the mouse or keyboard batteries.Legal noticesFCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.IC StatementThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. “Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage V1 ENGLISH 12-1183LED indicatorPower ONLow batterywarningPairing When paired orfailed after 10 sec.Red LED is on for 10 sec.Red LED blinks for 10 sec.Red LED blinks.LED is o.Power ONLow batterywarningPairing When paired orfailed after 10 sec.Red LED is on for 10 sec.Red LED blinks for 10 sec.Red LED blinks.LED is o.radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.”This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. “Cet équipement est conforme à l’exposition aux rayonnements IC limites établies pour un environnement non contrôlé.”RSS-Gen and RSS-210 statementThis device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.RSS-102 statementThis equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.One-year limited warrantyFor complete warranty, visit www.dynexproducts.com.Contact DynexFor customer service call 1-800-305-2204www.dynexproducts.comDYNEX is a registered trademark of BBY Solutions, Inc. Registered in some countries.Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A.©2013 BBY Solutions, Inc. All Rights Reserved.Mouse indicatorKeyboard indicatorCleaning your mouse and keyboard• Wipe the mouse and keyboard with a damp, lint-free cloth.LED indicatorAAA battery × 2 DX-WLC1401_12-1183_QSG_V1_EN.ai 2 1/9/2013 5:46:31 PMDX-WLC1401_12-1183_QSG_V1_EN.ai 2 1/9/2013 5:46:31 PM

Navigation menu