Acoustic Arc AAI-DS0980USI 2.4GHz Digital Wireless Speaker User Manual

Acoustic Arc International Ltd. 2.4GHz Digital Wireless Speaker

User Manual

2.4GHz Wireless Stereo Speaker SystemUser's ManualPlease read before using the equipment
P.2INTRODUCTIONThis stereo wireless speaker system applies the latest 2.4GHz wireless technologythat enables you to enjoy music and TV sound anywhere inside your home. Youcan simply connect the transmitter with any audio source such as iPod, iPhone,TV, DVD, Hi-Fi and CD/MP3 player.FEATURES1. 2.4GHz digital RF technology2. Auto Paring System on speakers3. Stereo Effect on Speakers4. Auto Pin Charging System for speaker.5. 30 pin docking station for iPhone/iPod6. . Auto 30 pin Charging System for iPhone/iPod.7. Built-in Rechargeable Battery Pack8. Operating distance up to 50 meters.9. No line of sight limitation.10. Auto ON/OFF control on Transmitter
P.3TRANSMITTER1. Connect the supplied AC power adapter to an electrical wall outlet.2. Plug the AC power adapter in the DC jack located on the rear of thetransmitter.3. The rear of the transmitter has one audio jack that can be connected toaudio output jack of TV, iPod, iPhone, DVD, and CD/MP3 players or toheadphone/earphone jack with the connector provided.4. The transmitter has one 30 pins dock connecting socket for iPhone/iPod.Plug the iPhone/iPod to the socket for audio output and charging.Power/Signal Indicator (Green/Blue)30 pin dock connecting socket
P.4When the power adapter connection is finished, the LED of transmitter will light upin Green. When the audio cable connection is finished or the iPhone/iPod isplugged to the 30 pins dock connecting socket, turn on the audio source and theLED will turn from Green to Blue.SPEAKERS1. Charge the speakers by placing them on the transmitter station for 12hours before initial use. Alternatively, the built-in rechargeable battery pack can bereplaced by 8 x “AAA” size ALKALINE batteries.2. Switch the Power button and turn the speakers ON. The Power/StandbyLED will light up in Blue.OPERATION1. Connect the power adapter between wall jack and transmitter. The LED willturn to Green.2. Turn on the audio source (TV or audio component) to which the transmitteris connected with. The LED will turn from Green to Blue.3. Turn on the transmitter by switching the ON/OFF button on the rear oftransmitter.
P.54. Turn on the Power button on the speaker and adjust the volume by tuningthe volume button for desired listening level.5. You should now be able to place the speakers freely from room to roomwithout disruption.6. When the battery is low, the light on the speaker will blink and there is a“du du” sound notification to alert the user to charge the speaker.7. If no music is detected from speakers, a paring process is required. Paringis not necessary if the system works properly.Paring1.Press “Pair” button for 3 seconds on transmitter, the paring process will continueand LED will flash for about 15 seconds.2.Press “Pair” button for 3 seconds on speaker when LED on transmitter isflashing.3.Once the Pairing process is finished, LED on transmitter and speaker turn tosolid blue. Music will stream out.4.When Pairing is matched once, there is no need to do further at next applicatons.
P.6Charging the iPhone/iPod1. Connect the power adapter between wall jack and transmitter. The LED will turnto Green.2. Plug the AC power adapter in the DC jack located on the rear of the transmitter.3. Plug the iPhone/iPod to the 30 pins dock connecting socket to charge theiPhone/iPod.SWITCHNG OFF1. If there is no audio input signal to transmitter in 4 minutes, transmitter will
P.7go to standby mode and LED will change from Blue to Green.2. Turn the switch on the rear of transmitter to OFF.3. If the power adapter is unplugged, the LED on transmitter will turn off.4. Speaker will turn to standby mode if there is no input signal to transmitterand LED will become Green. At standby mode, speaker will turn to Onautomatically after getting signal from transmitter.Charging the speakers1. Make sure the switch in the battery compartments is at charging condition.2. Turn your speakers to off.3. Place your speakers to the right positions of the cradle on the transmitter.4. The LEDs on speakers will light up in Red if the charging is under process.ChargeNormalREMARK: For better rechargeable battery life performance, speakers shouldbe turned off when charging.TROUBLE SHOOTINGNO SOUND-Ensure the AC adapter is fully inserted into the AC outlet and thepower connection input on the transmitter.-Ensure the speaker is switched ON.-Speaker’s battery capacity is too low, turn off the spearkers andrecharge the speakers by placing them on transmitter station.-Ensure the TV or audio component is ON.-The connected audio / video equipment is not playing. Start playingChargeNormal
P.8the equipment.-The volume of speaker is too low, adjust the volume to an appropriatelevel.DISTORTED-Battery capacity is too low. Recharge the speakers.-Ensure the volume level of speakers is adjusted properly.-The speaker is too far from transmitter, move closer.-The input level of the audio signal is too low. Turn up the volume ofthe audio source equipmentTECHNICAL SPECIFICATIONSTransmission Mode : UHF stereoCarrier Frequency : 2.4GHzOperation Voltage : Transmitter, DC 15V 2.0AFrequency Response:20Hz–20KHzDistortion:1.5%S/N Ratio : 80dB (typical)Channel Separation : 50dB (typical)Operation Distance : Up to 50 metersOutput Power : 2 x 5W (Max)Canada StatementThis device complies with RSS-210 of Industry and ScienceCanada. Operation is subject to the following two conditions : (1)this device may not cause interference, and (2) this device mustaccept any interference that may cause undesired operation of thedevice.WARNING : Changes or modifications to this unit not expressly approved bythe party responsible for compliance could void the user’s authorityto operate the equipment. Operation is subject to the following twoconditions: (1) this device may not cause interference, and (2) thisdevice must accept any interference, including interference thatmay cause undesired operation of the device.FCC StatementThis equipment has been tested and found to comply with the limits for a
P.9Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Copnnect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC CautionChanges or modifications to this unit not expressly approved by the partyresponsible for compliance could void the user's authority to operate thisequipment.This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1)This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

Navigation menu