Acer orporated QBT1 H7550ST Extension Board User Manual UM Acer En

Acer Incorporated H7550ST Extension Board UM Acer En

Contents

User manual

Acer ProjectorH7550ST/E155S/HE-815ST/H1P1403/H7550STz/H7550BD/E155D/HE-815J/H1P1406/H7550BDz/Z650/EG40S/HG-80ST/Q1P1504 Series User's Guide
Copyright © 2014. Acer Incorporated.All Rights Reserved.Acer Projector User's GuideOriginal Issue: 11/2014Acer ProjectorAcer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies."HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.Model number: __________________________________Serial number: ___________________________________Date of purchase: ________________________________Place of purchase: ________________________________
iiiInformation for Your Safety and ComfortRead these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.Turning the product off before cleaningUnplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.Caution for plug as disconnecting deviceObserve the following guidelines when connecting and disconnecting power to the external power supply unit:•Install the power supply unit before connecting the power cord to the AC power outlet.•Unplug the power cord before removing the power supply unit from the projector.•If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.Caution for AccessibilityBe sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.Warnings!•Do not use this product near water.•Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.•Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.•Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
iv•To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.•Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp.Using electrical power•This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.•Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.•If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.•Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.•This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.•Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length.
vProduct servicingDo not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.Unplug this product from the wall outlet and refer servicing to qualified service personnel when:•the power cord or plug is damaged, cut or frayed•liquid was spilled into the product•the product was exposed to rain or water•the product has been dropped or the case has been damaged•the product exhibits a distinct change in performance, indicating a need for service•the product does not operate normally after following the operating instructionsNote: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.Your device and its enhancements may contain small parts. Keep them out of the reach of small children.Additional safety information•Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.•Turn on the projector first and then signal sources.•Do not place the product in the following environments:• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary.• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image.• Locations near fire alarms.• Locations with an ambient temperature above 40 ºC/104 ºF.RG2 IEC 62471-5:2015
vi• Locations where the altitudes are higher than 10000 feet.•Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.•Do not keep using this product to break or drop it. In this case contact your dealer for inspection.•Do not face the projector lens to the sun. It can lead to fire.•When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.•Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to stop before turning main power off.•Do not touch the air outlet grille and bottom plate which become hot.•Do not look into the air outlet grille when projector is operating. It may hurt your eyes.•Always open the lens shutter or remove the lens cap when the projector is on.•Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.•The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.•Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions.•Never replace the lamp assembly or any electronic components unless the projector is unplugged.•The product will detect the life of the lamp itself. Please be sure to change the lamp when warning messages display.•When changing the lamp, please allow the projector to cool down, and follow all changing instructions.•Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.•Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.•Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage.•This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.•The radio module certified by Japanese Radio Law is integrated inside.
viiCaution for ListeningTo protect your hearing, follow these instructions.•Increase the volume gradually until you can hear clearly and comfortably.•Do not increase the volume level after your ears have adjusted.•Do not listen to music at high volumes for extended periods.•Do not increase the volume to block out noisy surroundings.•Decrease the volume if you can't hear people speaking near you.Disposal instructionsDo not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/index.htmMercury advisoryFor projectors or electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org"Lamp(s) contain Mercury,Dispose Properly."
viiiFirst Thing FirstUsage NotesDo:•Turn off the product before cleaning.•Use a soft cloth moistened with mild detergent to clean the display housing.•Disconnect the power plug from AC outlet if the product is not being used for a long period of time.Don't:•Block the slots and openings on the projector provided for ventilation.•Use abrasive cleaners, waxes or solvents to clean the unit.•Use under the following conditions:•In extremely hot, cold or humid environments.•In areas susceptible to excessive dust and dirt.•Near any appliance that generates a strong magnetic field.•Place in direct sunlight.PrecautionsFollow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.Warning:•Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.•To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.•Please do not open or disassemble the product as this may cause electric shock.•When changing the lamp, please allow the projector to cool down, and follow all changing instructions.•This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.•Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.•When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.•Turn on the projector first and then the signal sources.•Do not use lens cap when projector is in operation.•When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".
Information for Your Safety and Comfort iiiFirst Thing First viiiUsage Notes viiiPrecautions viiiIntroduction 1Product Features 1Package Overview 2Projector Overview 3Projector Outlook 3Control Panel 4Remote Control Layout 5MHL Feature Introduction 7Getting Started 8Connecting the Projector 8Turning the Projector On/Off 9Turning On the Projector 9Turning Off the Projector 10Adjusting the Projected Image 11Adjusting the Height of the Projected Image 11How to Optimize Image Size and Distance 12How to Get a Preferred Image Size by Adjusting Distance and Zoom 14User Controls 16Installation Menu 16Onscreen Display (OSD) Menus 17Color 18Image 20Setting 21Management 25Audio 253D 27Language 28Contents
Appendices 29Troubleshooting 29LED & Alarm Definition Listing 33Using the inner connector(s) 34Replacing the Lamp 35Ceiling Mount Installation 36Specifications 39Compatibility Modes 41Regulations and safety notices 45
1EnglishIntroductionProduct FeaturesThis product is a single-chip DLP® projector, including the following outstanding features:•DLP® technology•Native 1920 x 1080 1080p resolution, Auto/Full/4:3/16:9/L.Box/16:6 aspect ratio supported•Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported and Nvidia 3DTV Play Ready•Enriches 3D experience for 2D contents via 2D to 3D convert function•One-touch "G" or "3D" button on remote control allows quick and easy access to the G or 3D functions•Acer ColorBoost technology delivers vivid, life-like images•High brightness and contrast ratio•Versatile display modes enable optimum performance in any situation•NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported•Lower power consumption and economy (ECO) mode extends lamp life•Dynamic Black / ExtremeEco functions help decrease lamp power consumption and further extend lamp life.- Dynamic Black: If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.- ExtremeEco: The projector will decrease the power consumption of the lamp by up to 70% when no input signal can be detected for 5 minutes.•Acer EcoProjection Technology delivers Intelligent power management approach and physical efficiency improvement•Advanced keystone correction delivers optimum presentations•Multi-language Onscreen Display (OSD) menus•Manual focus/zoom projection lens•2X digital zoom and pan move function•Microsoft® Windows® 2000, XP, 7, 8, 8.1, Vista®, Macintosh OS, Chrome OS compliant•Built-in 20W speaker•DTS sound effect•CEC (Consumer Electronics Control) function supported
2EnglishPackage OverviewThis projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.Projector Power cord VGA cableSecurity card User’s guide (CD-ROM) Remote controlQuick start guide Battery x 2 Carrying case (Optional)WirelessHD dongle kit (Optional)3D glasses kit (Optional) Chromecast (Optional)
3EnglishProjector OverviewProjector OutlookFront/upper sideRear side#Description #Description1 Control panel 5 Focus ring and Zoom ring2 Speaker 6 HDMI (MHL) connectorMicro USB cable3 Elevator button 7 Projection lens4 Power key and Power indicator LED 8 Remote control receiver#Description #Description1 RS232 connector 8 Audio input connectorAudio output connector2 HDMI (MHL) connector3 HDMI connector 9 Tilt adjusting wheel4 Mini USB connector 10 Power socket5 S-Video input connectorComposite video input connector11 DC 5V out12 Monitor loop-through output connector6 Analog RGB signal/HDTV/component video input connector7 Component Video inputs 13 Kensington™ lock port157426328157426328(H7550BD/E155D/HE-815J/H1P1406/H7550BDz)(H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504)1 2 3 4 5 6 7 8109 131211
4EnglishControl Panel#Function Description1 LAMP Lamp Indicator LED.2POWER indicator LEDRefer to the "Turning the Projector On/Off" section.3 Keystone Adjusts image distortion caused by tilting projection (±40 degrees).4 RESYNC Automatically synchronizes the projector to the input source.5 MENU Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu.6 Power key Refer to the "Turning the Projector On/Off" section.7 TEMP Temp Indicator LED.8 SOURCE Chooses RGB, component video, S-Video, composite video, HDMI (MHL) or HDTV source.9 Four directional selection keysSelects items or makes adjustments to your selection10 MODE Chooses a display mode.178335610942
5EnglishRemote Control Layout#Function Description1 POWER Refer to the "Turning the Projector On/Off" section.2 MEDIA SETUP (No function)3 ZOOM Zooms the projector display in or out.4 MODE Chooses a display mode.5KeystoneAdjusts image distortion caused by tilting projection (±40 degrees).Four directional selection keysSelects items or makes adjustments to your selection.6 Keypad 0~9 Press "0~9" to input a password in the "Setting" > "Security" OSD.7 VGA To change source to VGA. This connection supports analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and YCbCr (480i/576i).8 COMPONENT To change source to Component video. This connector supports YPbPr/YCbCr.9 S-VIDEO To change source to S-Video.10 HDMI™/MHL To change source to HDMI™ (or MHL). (for the model with HDMI™ or MHL connector)11 Infrared transmitterSends signals to the projector.12 FREEZE To pause the screen image.Model No:E-26371MC.JMS11.001(H7550BD/E155D/HE-815J/H1P1406/H7550BDz/H7550ST/E155S/HE-815ST/H1P1403/H7550STz) (Z650/EG40S/HG-80ST/Q1P1504)
6English13 SOURCE Chooses RGB, component video, S-Video, composite video, HDMI (MHL) or HDTV source. 14 HIDE Press "HIDE" to hide screen image; press again to display the image.15 MENU Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu.16 PgUp/PgDn For computer mode only. Use this button to select the next or previous page. This function is only available when connected to a computer via a USB cable.17 VIDEO To change source to composite video.18 RATIO Chooses an aspect ratio.19 WIRELESS;LAN/WiFi(No function)20 RewindPlay/PauseStopFast-forward(No function)21 SD/USB A (No function)22 USB B (No function)23 3D Press to open the 3D menu for adjusting 3D settings.24 G Chooses a display mode for game content from among the following modes: Game Auto, Dark FPS, Bright FPS, sRGB.#Function Description
7EnglishMHL Feature IntroductionWhen your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press "MODE" for one second to enter or leave the MHL control mode. After entering the MHL control mode, press "SOURCE" to switch between the navigation mode (default), media mode and numeric mode.#FunctionDescriptionNavigation mode Media mode Numeric mode4 MODE Long press for one second to enter or leave the MHL control mode.13 SOURCE After entering the MHL control mode, press to switch between the navigation mode (default), media mode and numeric mode.5Four directional select keysUp Up (No function) (No function)down down (No function) (No function)Left Left Decreases the volume.(No function)Right Right Increases the volume.(No function)6 Keypad 0~9 (No function) (No function) Enters 0~9.15 MENU Goes to the root menu.(No function) (No function)20 Rewind (No function) Rewinds/Plays/Pauses/Stops/Fast-forwards the playing media files.Enters 1.Play/Pause Selects or enters items.Enters 2.Stop Exits current page.Enters 3.Fast-forward (No function) (No function)
8EnglishGetting StartedConnecting the Projector#Description #Description1 Power cord 7 USB cable2 VGA cable 8 3 RCA component cable312123412DVD player, Set-top box, HDTV receiverVGARS232Video/S-Video OutputDisplaySpeakersSmartphone/tablet
9EnglishNote: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function.Note: Compatible HDMI/MHL dongles: WirelessHD, MWA3, Android, ChromecastTM.Turning the Projector On/Off Turning On the Projector1 Ensure that the power cord and signal cable are securely connected. The Power LED will light red.2 Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue.3 Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically (when the Source Lock function is disabled). • If the screen displays "No Signal", please make sure the signal cables are securely connected.• If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.3 Composite video cable 9 HDMI (MHL) cable4 Audio cable 10 WirelessHD dongle5 S-Video cable 11 Wireless dongle6 RS232 cable#Description #Description1 & 2(H7550BD/E155D/HE-815J/H1P1406/H7550BDz)(H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504)
10EnglishTurning Off the Projector1 To turn the projector off, press the power button. This message appears:"Please press power button again to complete the shutdown process"Press the power button again.2 The LED Power indicator will turn solid red to indicate standby mode.3 It is now safe to unplug the power cord.When Instant Resume is selected:1 The LED Power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.2 As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2-minute shutdown process. 3 Once the system has finished cooling, the LED Power indicator will stop blinking and turn solid red to indicate standby mode.4 It is now safe to unplug the power cord.Warning indicators:•"Projector Overheated. Lamp will automatically turn off soon."This onscreen message indicates that the projector has overheated. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will turn solid red. Contact your local dealer or service center.•"Fan failed. Lamp will automatically turn off soon."This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will blink. Contact your local dealer or service center.Note: Whenever the projector automatically shuts down and the LED Temp indicator turns solid red, contact your local reseller or service center.
11EnglishAdjusting the Projected ImageAdjusting the Height of the Projected ImageThe projector is equipped with two elevator feet for adjusting the image height.To raise the image:1 Press the elevator button.2 Raise the image to the desired height angle, then release the button to lock the elevator foot into position.3 Use the rear Tilt adjusting wheel to fine-tune the display angle.To lower the image:1 Press the elevator button.2 Lower the image to the desired height angle, then release the button to lock the elevator foot into position.3 Use the rear Tilt adjusting wheel to fine-tune the display angle.231Tilt adjusting wheelElevator footElevator button
12EnglishHow to Optimize Image Size and DistanceConsult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen.•H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504If the projector is 3 m from the screen, good image quality is possible for image sizes between 178" and 196".Note: Remind as below figure, the space of 251 cm height is required when the projector is located at 3 m distance.DesiredDistance (m)< A >Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom)Diagonal (inch)< B >W (cm) x H (cm)From base to top of image (cm)< C >Diagonal (inch)< B >W (cm) x H (cm)From base to top of image (cm) < C >1 59 132 x 74 76 65 145 x 82 84 1.5 89 197 x 111 114 98 217 x 122 125 2 119 263 x 148 152 131 290 x 163 167 2.5 149 329 x 185 190 164 362 x 204 209 3178 395 x 222 228 196 435 x 245 251 3.5 208 461 x 259 266 229 507 x 285 292 4 238 526 x 296 303 262 580 x 326 334 4.5 267 592 x 333 341 295 652 x 367 376 5 297 658 x 370 379 327 725 x 408 418 6 357 789 x 444 455 393 870 x 489 501 7 416 921 x 518 531 458 1014 x 571 585 8 475 1053 x 592 607 524 1159 x 652 668 9 535 1184 x 666 683 589 1304 x 734 752 10 594 1316 x 740 759 655 1449 x 815 836 11 654 1447 x 814 834 720 1594 x 897 919 12 713 1579 x 888 910 786 1739 x 978 1003 Zoom Ratio: 1.1 x3 mDesired distanceHeight:228 cmHeight:251 cmFrom base to top of imageMax screen sizeMin screen size178"196"
13English•H7550BD/E155D/HE-815J/H1P1406/H7550BDzIf the projector is 3 m from the screen, good image quality is possible for image sizes between 90" and 118".Note: Remind as below figure, the space of 154 cm height is required when the projector is located at 3 m distance.DesiredDistance (m)< A >Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom)Diagonal (inch)< B >W (cm) x H (cm)From base to top of image (cm)< C >Diagonal (inch)< B >W (cm) x H (cm)From base to top of image (cm) < C >1 30 67 x 38 39 39 87 x 49 51 1.5 45 100 x 56 59 59 130 x 73 77 2 60 133 x 75 79 79 174 x 98 103 2.5 75 167 x 94 98 98 217 x 122 128 390 200 x 113 118 118 261 x 147 1543.5 105 233 x 131 138 137 304 x 171 180 4 120 267 x 150 158 157 348 x 196 205 4.5 136 300 x 169 177 177 391 x 220 231 5 151 333 x 188 197 196 435 x 245 257 6 181 400 x 225 236 236 522 x 293 308 7 211 467 x 263 276 275 609 x 342 360 8 241 533 x 300 315 314 696 x 391 411 9 271 600 x 338 354 354 783 x 440 462 10 301 667 x 375 394 393 870 x 489 514 11 331 733 x 413 433 432 957 x 538 565 12 361 800 x 450 473 471 1043 x 587 616 Zoom Ratio: 1.3 x3 mDesired distanceHeight:118 cmHeight:154 cmFrom base to top of imageMax screen sizeMin screen size90"118"
14EnglishHow to Get a Preferred Image Size by Adjusting Distance and ZoomThe table below shows how to achieve a desired image size by adjusting either the position or the zoom ring.•H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504To obtain an image size of 70", set the projector at a distance between 1.1 m and 1.2 m from the screen and adjust the zoom level accordingly.Desired Image Size Distance (m) Top (cm)Diagonal (inch)< A > W (cm) x H (cm) Max zoom< B >Min zoom< C >From base to top of image < D >30 66 x 37 0.5 3840 89 x 50 0.6 0.7 5150 111 x 62 0.8 0.8 6460 133 x 75 0.9 1.0 7770 155 x 87 1.1 1.2 8980 177 x 100 1.2 1.3 10290 199 x 112 1.4 1.5 115100 221 x 125 1.5 1.7 128120 266 x 149 1.8 2.0 153150 332 x 187 2.3 2.5 191180 398 x 224 2.7 3.0 230200 443 x 249 3.1 3.4 255250 553 x 311 3.8 4.2 319300 664 x 374 4.6 383Zoom Ratio: 1.1 xDesired distanceHeight:89 cmFrom base to top of image70"Desiredimage size1.1 m1.2 m
15English•H7550BD/E155D/HE-815J/H1P1406/H7550BDzTo obtain an image size of 70" set the projector at a distance between 1.8 m and 2.3 m from the screen and adjust the zoom level accordingly.Desired Image Size Distance (m) Top (cm)Diagonal (inch)< A > W (cm) x H (cm) Max zoom< B >Min zoom< C >From base to top of image < D >30 66 x 37 1.0 3940 89 x 50 1.0 1.3 5250 111 x 62 1.3 1.7 6560 133 x 75 1.5 2.0 7870 155 x 87 1.8 2.3 9280 177 x 100 2.0 2.7 10590 199 x 112 2.3 3.0 118100 221 x 125 2.5 3.3 131120 266 x 149 3.1 4.0 157150 332 x 187 3.8 5.0 196180 398 x 224 4.6 6.0 235200 443 x 249 5.1 6.6 262250 553 x 311 6.4 8.3 327300 664 x 374 7.6 392Zoom Ratio: 1.3 xDesired distanceHeight:92 cmFrom base to top of image70"Desiredimage size1.8 m2.3 m
16EnglishUser ControlsInstallation MenuThe Installation menu provides an Onscreen Display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal" is displayed on the screen. 1 Turn on the projector by pressing (POWER) on the control panel or remote control.2 Press "MENU" on the control panel or remote control to launch the OSD for projector installation and maintenance.3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more.Note: The OSD screenshot is for reference only and may differ from the actual design.4 The Installation menu includes several options.Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu.5 Press "MENU" anytime to exit the menu and return to the Acer welcome screen.
17EnglishOnscreen Display (OSD) MenusThe projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings.Using the OSD menus•To open the OSD menu, press "MENU" on the control panel or remote control.•When the OSD is displayed, use to select an item in the main menu. After selecting the desired main menu item, press to enter a submenu for feature setting.•Use to select the desired item and adjust the settings by using .•Select the next item to be adjusted in the submenu and adjust as described above.•Press "MENU" on the control panel or remote control, the screen will return to the main menu.•To exit the OSD menu, press "MENU" on the control panel or remote control again. It will close and the projector will automatically save the new settings.Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector.Main menuSubmenuSetting
18EnglishColorDisplay ModeThere are many factory presets optimized for various types of images.•Bright: For brightness optimization.•Standard: For common environment.•sRGB: For ture-color optimization.•Movie: For brighter and general movie/video/photo playing.•Dark Cinema: For dark movie content.•Game: For game content.•Game Auto: For game content and automatically adjusts image contrast and saturation according to the displayed content.•Dark FPS: For darker game content and brings out more details in the darker areas. •Bright FPS: For brighter game content and increases image contrast and saturation.•Sport: For sport picture.•User: Memorize user’s settings.Wall ColorUse this function to choose a proper color according to the wall. There are several choices, including White, Light Yellow, Light Blue, Pink and Dark Green. It will compensate for the color deviation due to the wall color to show the correct image tone.BrightnessAdjusts the brightness of the image.•Press to darken the image.•Press to lighten the image.ContrastControls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.•Press to decrease the contrast.•Press to increase the contrast.
19EnglishSaturationAdjusts a video image from black and white to fully saturated colors.•Press to decrease the amount of color in the image.•Press to increase the amount of color in the image.TintAdjusts the color balance of red and green.•Press to increase the amount of green in the image.•Press to increase the amount of red in the image.Color TemperatureAdjusts the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer.Dynamic BlackIf turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.Gamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter.
20EnglishNote: "Saturation" and "Tint" functions are not supported under computer mode.Advanced•Ind. Color Management: Adjusts the red, green, blue, cyan, yellow and magenta colors.•- Ind. Hue: Changes the hue of the color selected.•- Ind. Saturation: Adjusts a video image from black and white to fully saturated color.•- Ind. Gain: Adjusts the contrast levels.•Brilliant Color: Produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. This feature is "On" by default.•White Peaking: Increases the brightness of whites that are near 100%. (Video sources only)•Film Mode: Sets the image optimized to 24-frame True Film mode for more realistic cadence of film playback during motion sequences.•Noise Reduction: Adjusts the level of noise reduction that helps to eliminate unwanted noise in the picture.•Black Extension: Analyzes the current input image and calculates an offset value which is then added to the analog to digital converter black level value. This ensures optimum black level for each analog source.
21EnglishImageProjection Mode• Front: The factory default setting.• Rear: Reverses the image so you can project from behind a translucent screen.Projection Location• Auto: Automatically adjusts projection location of image.• Desktop• Ceiling: Turns the image upside down for ceiling-mounted projection.Aspect RatioUse this function to choose your desired aspect ratio.•Auto: Keeps the image with original width-height ratio and maximizes the image to fit native horizontal or vertical pixels.•Full: The image will be displayed making full use of the horizontal and vertical pixels.•4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio.•16:9: The image will be scaled to fit the screen and displayed using a 16:9 ratio.•L.Box: Keeps the original signal aspect ratio and zooms in by 1.333 times.Auto Keystone Automatically adjusts image distortion caused by tilting projection (±40 degrees).Manual KeystoneManually adjusts image distortion caused by tilting projection (±40 degrees).This function is unavailable when Auto Keystone is set to "On".
22EnglishH/V Keystone•V. Keystone: Manually adjusts image distortion caused by tilting projection (±30 degrees).•H. Keystone: Manually adjusts image distortion caused by tilting projection (±30 degrees).4 Corner CorrectionManually adjusts the shape and size of an image that isunevenly rectangular on all sides. Press "MODE" repeatedly to select the corner that you wish to adjust. Press four directional selection keys to adjust the image shape.Please adjust 4-corner correction separately for each aspect ratio, and its memory is allowed to save 4 sets of settings only.SharpnessAdjusts the sharpness of the image.•Press to decrease the sharpness.•Press to increase the sharpness.H. Position (Horizontal Position)•Press to move the image left.•Press to move the image right.V. Position (Vertical Position)•Press to move the image down.•Press to move the image up.FrequencyChanges the projector’s refresh rate to match the frequency of your computer’s graphics card. If you experience a vertical flickering bar in the projected image, use this function to correct it.
23EnglishNote: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode.Note: "HDMI Color Range" and "HDMI Scan Info" are only available when the input signal is HDMI.SettingTrackingSynchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it.HDMI Color RangeAdjusts the color range of the HDMI image data to prevent color display error.•Auto: Automatically adjusts the color range by information from the player.•Limited Range: Processes the input image as limited color range data.•Full Range: Processes the input image as full color range data.HDMI Scan InfoAdjusts the overscan ratio of the HDMI image on screen.•Auto: Automatically adjusts the overscan ratio by information from the player.•Underscan: Always no overscan on the HDMI image.•Overscan: Always keep overscan on the HDMI image.Startup ScreenUse this function to select your desired startup screen. If you change the setting, it will take effect when you exit the OSD menu.•Acer/Predator: The default startup screen of your Acer projector.•User: Use the memorized picture from the "Screen Capture" function.
24EnglishScreen CaptureUse this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below.NoticeBefore proceeding with the following steps, make sure that the "Keystone" is set to the default value "0", and the "Aspect Ratio" is set to "4:3". For details, refer to the "Image" section.•Change the "Startup Screen" from the default setting to "User".•Select "Screen Capture" to customize the startup screen.•A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. Choose "No" to cancel the screen capture and exist the Onscreen Display (OSD).•A message appears stating that the screen capture is in progress. •When the screen capture is finished, the message disappears and the original display is shown. In the unlikely event that the capturing action fails, change the resolution of your target picture to 800 x 600.Source LockSelecting "On" enables the function and when switching input signals, you need to press "SOURCE" on the control panel or remote control, or the direct source key on the remote control. When this function is disabled, the projector will detect your source automatically.Closed CaptionSelects a preferred closed captioning mode from CC1, CC2, CC3, CC4 (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC.VGA OUT (Standby)Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices.Enabling this function slightly increases the standby power consumption.
25EnglishDC 5V Out (Standby)Selecting "On" enables the function. Both micro USB cable inside the projector and the DC 5V out port on the back of the projector can output 5V power when it is in standby mode.Enabling this function slightly increases the standby power consumption.HDMI CEC (Internal)Selecting "On" allows synchronized power ON/OFF operationbetween the projector and a CEC-compatible deviceconnected to the HDMI/MHL port of the projector.This function is only available for the internal HDMI/MHL port.Reset Press after choosing "Yes" to return the display parameters on all menus to the factory default settings.SecuritySecurityThis projector provides a useful security function for the administrator to manage the projector.Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting.The factory default of "Administrator Password" is "0000".•Select "On" to enable the security function. You have to enter password depending on the "Security Mode". Please refer to "User Password" section for details.•If "Off" is selected, you can switch on the projector without password.Timeout (Min.)Once "Security" is set to "On", you can set timeout function.•Press to select timeout duration.•The range is from 10 to 990 minutes.•When time is up, the projector will request you to enter the password again.•The factory default setting of "Timeout (Min.)" is "Off".•Once the security function is enabled, the projector will request you to enter password when switching on the projector. Both "User Password" and "Administrator Password" can be accepted for this dialogue.
26EnglishSecurityUser Password•Press to set up or change "User Password".•Use the numerical keys on the remote control to set the password and press "MENU" to confirm.•To delete the digits, Press .•Enter the password again when you see "Confirm Password" displayed.•The password should be 4~8 digits in length.•If you select "Request password only after plugging power cord", you are requested to input the password every time the power cord is plugged.•If you select "Always request password while projector turns on", you are requested to input the password every time the projector is turned on.Administrator PasswordYou can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box displays.•Press to change "Administrator Password".•The factory default of "Administrator Password" is "0000".If you forget your administrator password, do the following to retrieve the administrator password:•Enter the unique 6-digit "Universal Password" which is printed on the Security Card that came with your projector. This unique password will be accepted by the projector no matter what the administrator password is.•If the Security Card is lost, please contact your local Acer service center.Lock User Startup ScreenThis function is set to "OFF" by default. If set to "ON", the startup screen is locked and cannot be changed by the "Startup Screen" and "Screen Capture" functions.
27EnglishManagementAudioECO ModeChoose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode.High AltitudeChoose "On" to turn on the High Altitude mode. When this function is turned on, the projector fans operate at full speed continuously to cool down the projector’s temperature.Turn Off Mode•Instant Off: Enables you to turn off the projector immediately without fan cooling process by pressing the power button twice.•Instant Resume: Enables you to restart the projector immediately within 2 minutes after turning it off.Auto Shutdown(Minutes)The projector will automatically shut down while there is no signal input detected after the time you set.AC Power OnSelecting "On" enables the function. The projector will automatically turn on when power is supplied via the power cord.Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).Lamp RemindingChoose this function to show or hide warning message when the changing lamp message is displayed. The message will show up 30 hours before end of life.Lamp Hour Reset Press after choosing "Yes" to reset the lamp hour counter to 0 hours.Volume •Press to decrease the volume.•Press to increase the volume.DTS Selecting "On" enables the function. Stereo enhancement will improve dynamic audio performance.Treble Adjusts treble level. Bass Adjusts bass level.BT Speaker Connection•Bluetooth: Selecting "On" enables the function.•Bluetooth Search: Press to search for available devices. Select a device in the list of found devices. The projector will automatically try to connect to the last connected device the next time you enable the Bluetooth function.
28EnglishMute •Choose "On" to turn mute on.•Choose "Off" to turn mute off.Power On/Off VolumeSelect this function to adjust the notification volume when turning the projector on/off.Alarm Volume Select this function to adjust the volume of any warning notifications.
29English3DNote: Supported 3D signal timings: 3DSelects "On" to enable the 3D function supported by DLP 3D technology.•On: Select this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphics card and HQFS format file or DVD with corresponding SW player.•Off: Turns off the 3D mode.2D to 3D•2D to 3D: Converts 2D contents to 3D. Note that DLP 3D glasses are required to obtain the best 3D effect.•Mode: Provides several preset 2D to 3D conversion modes for your selection. You can also select User and use the "Convergence" and "Depth" functions described below to setup your customized conversion mode.•Convergence: Changes the convergence effect that is used when converting 2D contents to 3D.•Depth: Adjusts the image depth of 3D objects."Depth" and "Convergence" are only available when "Mode" is set to "User".3D FormatIf the 3D content is not displayed correctly, you can select a 3D format that suits the 3D content you are viewing and obtain the best result.3D Sync InvertIf you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/right image sequence to get the correct image (for DLP 3D).24P 3D Choose 96Hz or 144Hz for 24p 3D.3D Warning MessageChoose "On" to display the 3D warning message.Signal source type Supported timingVideo/S-Video/Component videoHQFS 3D (480i@60Hz), 576i@50Hz
30EnglishIt needs correct settings on graphics card 3D application program for correct 3D display.The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these players on the web page below.- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx- DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.htmlNote: "3D Sync Invert" and "3D Format" are only available when "3D" is enabled.LanguageVGA/HDMI (PC mode) 640 x 480@50/60/100/120Hz800 x 600@50/60/100/120Hz1024 x 768@50/60/100/120Hz1280 x 800@50/60/100/120Hz (RB)HDMI (Video mode) HQFS 3D (480i@60Hz) , 576i@50Hz,Frame Packing (1080p@23.98/24Hz, 720p@50/60Hz)Side-by-Side Horizontal (1080i@50/60Hz, 1080p@50/60Hz)Top-and-Bottom (720p@50/60Hz, 1080p@23.97/24Hz, 1080p@50/60Hz)Language Sets a language for the OSD menus. Use to select your preferred language.
29EnglishAppendicesTroubleshootingIf you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center.Image Problems and Solutions# Problem Solution1 No image appears onscreen •Make sure all the cables are correctly connected as described in the "Getting Started" section.•Ensure none of the connector pins are bent or broken.•Check if the projection lamp has been securely installed. Please refer to the "Replacing the Lamp" section.•Make sure the projector is switched on.2 Partial, scrolling or incorrectly displayed image (For PC (Windows 95/98/2000/XP/Win7/Vista))•Press "RESYNC" on the control panel or remote control.•For an incorrectly displayed image:•Open "My Computer > Control Panel," and then double-click the "Display" icon.•Select the "Settings" tab.•Verify that your display resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080.•Click the "Advanced Properties" button.If the problem still appears, change the monitor display you are using and follow the steps below:•Verify that the resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080.•Click the "Change" button under the "Monitor" tab.•Click "Show all devices > Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box.•Verify that the resolution setting of the monitor display is lower than or equal to 1600 x 1200 or 1920 x 1080.
30English3 Partial, scrolling or incorrectly displayed image(For notebooks)•Press "RESYNC" on the control panel or remote control.•For an incorrectly displayed image:•Follow the steps for item 2 (above) to adjust the resolution of your computer.•Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]•If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.4 The screen of the notebook computer is not displaying your presentation•If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information.•If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On."5 Image is unstable or flickering •Use "Tracking" to correct it. Refer to the "Image" section for more information.•Change the display color setting on your computer.6 Image has vertical flickering bar •Use "Frequency" to make an adjustment. Refer to the "Image" section for more information.•Check and reconfigure the display mode of your graphics card to make it compatible with the projector.7 Image is out of focus •Adjust the focus ring on the projector lens.•Make sure the projection screen is within the required distance:H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504: 3.0 to 15.0 feet (0.9 to 4.6 meters)H7550BD/E155D/HE-815J/H1P1406/H7550BDz: 3.3 to 25.1 feet (1.0 to 7.6 meters)Refer to the "How to Get a Preferred Image Size by Adjusting Distance and Zoom" section for more information.
31EnglishProblems with the Projector8 Image is stretched when displaying a "widescreen" DVD titleWhen you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings:•If you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD.•If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player.9 Image is too small or too large •Adjust the zoom lever on the top of the projector.•Move the projector closer to or further from the screen.•Press "MENU" on the control panel or remote control. Go to "Image" > "Aspect Ratio" and try different settings.10 Image has slanted sides •If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen.•Press the Keystone correction keys on the control panel or remote control until the image becomes square.•Press "MENU" on the control panel or remote control to open the OSD menu. Go to "Image" > "Auto Keystone" or "Image" > "Manual Keystone" to make adjustments.11 Image is reversed •Select "Image" > "Projection Mode", "Image" > "Projection Location" on the OSD and adjust the projection direction.# Condition Solution1 The projector stops responding to all controlsIf possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.2 Lamp burns out or makes a popping soundWhen the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section.
32EnglishOSD Messages# Condition Message Reminder1 Message Fan Fail - the system fan is not working.Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it.Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon.Fan Fail.Lamp will automatically turn off soon.Projector Overheated.Lamp will automatically turn off soon.Lamp is approaching the end of its useful life in full power operation.Replacement suggested!
33EnglishLED & Alarm Definition ListingLED MessagesMessage Power LED LAMP LED TEMP LEDRed Blue Red RedStandby(Power cord plugged in)V-- -- --Power on -- V -- --Lamp retry -- Quick flashing-- --Turning off (Cooling state)Quick flashing-- -- --Turning off (Cooling completed)V-- -- --Error (Thermal failure) -- V -- VError (Fan lock failure) -- V -- Quick flashingError (Lamp breakdown) -- V V --Error (Color wheel failure)-- V Quick flashing--
34EnglishUsing the inner connector(s)Turn the projector off by pressing (POWER). Allow the projector at least 45 minutes to cool down. Disconnect the power cord.1 Use a screwdriver to remove the screw(s) from the cover. (Illustration #1)2 Push up and remove the cover. (Illustration #2)3 Locate the HDMI (MHL) connector beside the focus/zoom ring.4 Put the bottom of the WirelessHD dongle (optional accessory) or other HDMI/MHL dongle into the projector first (Illustration #3) and then insert the WirelessHD dongle or other HDMI/MHL dongle into the HDMI (MHL) connector. (Illustration #4)5 A micro USB cable is also available if you need to power the HDMI/MHL dongle.6 Replace the cover and tighten the screw(s). (Illustration #5 - #6)165244333434
35EnglishReplacing the LampUse a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 45 minutes before changing the lamp.Warning: Lamp compartment is hot! Allow it to cool down before changing lamp!To remove the lamp:Turn the projector off by pressing (POWER). Allow the projector at least 45 minutes to cool down. Disconnect the power cord.1 Use a screwdriver to remove the screw(s) from the cover. (Illustration #1)2 Push up and remove the cover.3 Remove the lamp protection film (Illustration #2).4 Remove the screw that secures the lamp module (Illustration #3).5 Disconnect the lamp connector from the projector. Lift the handle so that it stands up. Pull out the lamp module by force (Illustration #4).To replace the lamp module, use a new lamp and reverse the above steps (Illustrations # - # ).Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.865432121218758
36EnglishCeiling Mount InstallationIf you wish to install the projector using a ceiling mount, please refer to the steps below:1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base.Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling.2 Secure the ceiling rod using the appropriate type of cylinder screws.20 mm13mm8.4mm130 mm49.9mmShort RodScrew Type A50 mm length / 8 mm diameter -Ceiling Mount Base- Attach to ceilingLong RodExtension RodAllen Key- For tighten/loosenTightening ScrewMedium RodLarge Cylinder Cap
37English3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket.Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary.4 Attach the ceiling bracket to the ceiling rod.Smaller WasherLarge WasherProjector BracketSupports projector and allows for adjustments Screw Type BSpacer- For heat dissipationScrew Type A50 mm length - /8 mm diameterLarge Cylinder CapAllen Key- For tighten/loosenTightening Screw
38English5 Adjust the angle and positioning as necessary.Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack.Screw Type B Washer TypeDiameter (mm) Length (mm) Large Small425VV30Allen KeyTightening ScrewAllen KeyTightening Screw137 mm80 mm153.31 mm16.3 mm30.48 mm110.48 mm
39EnglishSpecificationsThe specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.Projection system DLP™Resolution Native: 1080p (1920 x 1080)Maximum: WUXGA (1920 x 1200) (supports reduce blanking only)Computer compatibility Refer to the "Compatibility Modes" section for more information.Video compatibility NTSC (3.58/4.43), PAL (M/N), PAL 60, SECAM, HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i)Aspect ratio Auto, 4:3, 16:9, Full, Letter Box (L.BOX), 16:6Displayable colors 1.07 billion colorsProjection lens •H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504: F = 2.6 - 2.78, f = 10.20 mm - 11.22 mm, 1:1.1 Manual Zoom and Manual Focus•H7550BD/E155D/HE-815J/H1P1406/H7550BDz: F = 2.59 - 2.87, f = 16.88 mm - 21.88 mm, 1:1.3 Manual Zoom and Manual FocusProjection screen size (diagonal) with clear focus•H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504: 54" (137 cm) - 300" (762 cm)•H7550BD/E155D/HE-815J/H1P1406/H7550BDz: 30" (76 cm) - 300" (762 cm)Projection distance with clear focus•H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504: 3.0' (0.9 m) - 15.0' (4.6 m)•H7550BD/E155D/HE-815J/H1P1406/H7550BDz: 3.3' (1.0 m) - 25.1' (7.6 m)Throw ratio •H7550ST/E155S/HE-815ST/H1P1403/H7550STz/Z650/EG40S/HG-80ST/Q1P1504: 131"±3% @ 2 m (0.69 - 0.76:1)•H7550BD/E155D/HE-815J/H1P1406/H7550BDz: 79"±3% @ 2 m (1.15 - 1.50:1)Horizontal scan rate 15 - 100 KHzVertical refresh scan rate 24 - 120 HzKeystone correction +/-40 Degrees (Vertical and horizontal), Manual & AutoDigital zoom 2 XAudio 10W x 2Weight Approximate 3.5 kg (7.71 lbs.)Dimensions (W x D x H) 357 x 241 x 98 mm (1.17’ x 0.79’ x 0.32’)Power supply Universal AC input 100 - 240 V, input frequency 50/60 HzPower consumption (typical) 325 WOperating temperature 0ºC to 40ºC / 32ºF to 104ºF
40English* Design and specifications are subject to change without notice.I/O connectors •Power socket x 1•USB x 1 (Type mini B)•VGA input x 1•VGA output x 1•Composite video x 1•S-Video x 1•Component Video (Y/Cb/Cr, Y/Pb/Pr) x 1•RS232 x 1•HDMI (MHL) x 2•HDMI x 1•DC 5V out x 1•3.5 mm audio jack input x 1•3.5 mm audio jack output x 1•Micro USB cable x 1Standard package contents •AC power cord x 1•VGA cable x 1•Remote control x 1•Battery x 2 (for the remote control)•User's guide (CD-ROM) x 1•Quick start guide x 1•Security card x 1Accessory (optional) •Composite video cable x 1•Carrying case x 1•WirelessHD dongle kit x 1•3D glasses kit x 1•Chromecast x 1
41EnglishCompatibility Modes1 VGA Analog - PC SignalMode Resolution V.Frequency [Hz] H.Frequency [KHz]VGA 640 x 48060 31.4772 37.8675 37.5085 43.27120 61.91SVGA 800 x 60056 35.2060 37.8872 48.0875 46.8885 53.67120 77.43XGA 1024 x 76860 48.3670 56.4875 60.0285 68.68120 98.96SXGA1152 x 86470 63.8575 67.5085 77.101280 x 102460 63.9872 76.9775 79.9885 91.15QuadVGA 1280 x 960 60 60.001280 x 960 75 75.00SXGA+ 1400 x 1050 60 65.32UXGA 1600 x 1200 60 75.00PowerBook G4640 x 480 60 31.50640 x 480 66.6 (67) 35.00800 x 600 60 37.881024 x 768 60 48.361024 x 768 75 60.2411152 x 870 75 68.681
42English2 HDMI - PC Signal WXGA1280 x 768 60 47.781280 x 768 75 60.291280 x 768 85 68.631280 x 720 60 45.001280 x 800 60 49.701280 x 800 - RB 120 101.61440 x 900 60 55.941680 x 1050 60 65.291366 x 768 60 47.711920 x 1080-RB 60 66.601920 x 1080-EIA 60 67.501024 x 600 60 37.501920 x 1200-RB 59.95 74.04Mode Resolution V.Frequency [Hz] H.Frequency [KHz]VGA_60640 x 48059.94 31.469VGA_72 72.809 37.861VGA_75 75 37.5VGA_85 85.008 43.269VGA_120 119.518 61.91SVGA_56800 x 60056.25 35.156SVGA_60 60.317 37.879SVGA_72 72.188 48.077SVGA_75 75 46.875SVGA_85 85.061 53.674SVGA_120 119.854 77.425XGA_601024 x 76860.004 48.363XGA_70 70.069 56.476XGA_75 75.029 60.023XGA_120 119.804 98.958SXGA_75 1152 x 864 75 67.5SXGA_85 84.99 77.094SXGA_601280 x 102460.02 63.981SXGA_72 72 76.97SXGA_75 75.025 79.976SXGA_85 85.024 91.146QuadVGA_75 1280 x 960 75 75
43English3 HDMI - Video Signal SXGA+_60 1400 x 1050 59.978 65.317UXGA_60 1600 x 1200 60 75Mac G4 640 x 480@60Hz 59.94 31.469MAC13 640 x 480@67Hz 66.667 35Mac G4 800 x 600@60Hz 60.317 37.879Mac G4 1024 x 768@60Hz 60.004 48.363MAC19 1024 x 768@75Hz 75.02 60.241MAC21 1152 x 870@75Hz 75.061 68.681WXGA_601280 x 76859.87 47.776WXGA_75 74.893 60.289WXGA_85 84.837 68.633WXGA_60 1280 x 720 60 45WXGA_60 1280 x 800 59.81 49.702WXGA_120-RB 1280 x 800 119.909 101.563WXGA+_60 1440 x 900 59.887 55.9351680x1050_60 1680 x 1050 59.954 65.29acer_16:9 1366 x 768 59.79 47.7121920 x 1080_RB 1920 x1080 60 66.5871920 x 1080_EIA 1920 x1080 60 67.5acer_timing 1024 x 600 60 37.51920 x 1200-RB 1920 x 1200 59.95 74.038Mode Resolution V.Frequency [Hz] H.Frequency [KHz]480i 720 x 480 (1440 x 480) 60 15.73480p 720 x 480 60 31.47576i 720 x 576 (1440 x 576) 50 15.63576p 720 x 576 50 31.25720p 1280 x 720 60 45.00720p 1280 x 720 50 37.501080i 1920 x 1080 60 33.751080i 1920 x 1080 50 28.131080p 1920 x 1080 60 67.501080p 1920 x 1080 50 56.261080p 1920 x 1080 24 27.001080p 1920 x 1080 23.98 26.97
44English4 MHL - Video Signal 5 YPbPr Signal6 Video, S-Video SignalMode Resolution V.Frequency [Hz] H.Frequency [KHz]480i 720 x 480 (1440 x 480) 60 15.73480p 720 x 480 60 31.47576i 720 x 576 (1440 x 576) 50 15.63576p 720 x 576 50 31.25720p 1280 x 720 60 45.00720p 1280 x 720 50 37.501080i 1920 x 1080 60 33.751080i 1920 x 1080 50 28.131080p 1920 x 1080 24 27.001080p 1920 x 1080 23.98 26.971080p 1920 x 1080 30 33.75Mode Resolution V.Frequency [Hz] H.Frequency [KHz]480i 720 x 480 59.94 15.73480p 720 x 480 59.94 31.47576i 720 x 576 50.00 15.63576p 720 x 576 50.00 31.25720p 1280 x 720 60.00 45.00720p 1280 x 720 50.00 37.501080i 1920 x 1080 60.00 33.751080i 1920 x 1080 50.00 28.131080p 1920 x 1080 60.00 67.51080p 1920 x 1080 50.00 56.261080p 1920 x 1080 24.00 27.001080p 1920 x 1080 23.98 26.97Mode V.Frequency [Hz] H.Frequency [KHz] fsc (MHz)NTSC 15.73 60 3.58PAL 15.63 50 4.43SECAM 15.63 50 4.25 or 4.41PAL-M 15.73 60 3.58PAL-N 15.63 50 3.58PAL-60 15.73 60 4.43NTSC4.43 15.73 60 4.43
45EnglishEnglishRegulations and safety noticesFCC noticeThis device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the device and receiver.•Connect the device into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/television technician for help.Notice: Shielded cablesAll connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.Notice: Peripheral devicesOnly peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.CautionChanges or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device.Operation conditionsThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Notice: Canadian usersThis Class B digital apparatus complies with Canadian ICES-003.
46EnglishRemarque à l'intention des utilisateurs canadiensCet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.Declaration of Conformity for EU countriesAcer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Compliant with Russian regulatory certification Radio device regulatory noticeNote: The regulatory information below is for models with wireless LAN and/or Bluetooth only.GeneralThis product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules).Canada — Low-power license-exempt radiocommunication devices (RSS-210)a Common informationOperation is subject to the following two conditions:1. This device may not cause interference, and2. This device must accept any interference, including interference that may cause undesired operation of the device.b Operation in 2.4 GHz bandTo prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing.
47EnglishEnglishList of applicable countriesThis device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.FCC RF Radiation Exposure Statement1 This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:1 l'appareil ne doit pas produire de brouillage, et2 l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Caution: Exposure to Radio Frequency Radiation.To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes.
48EnglishAcer Incorporated8F, 88, Sec. 1, Xintai 5th Rd., XizhiNew Taipei City 221, TaiwanDeclaration of ConformityWe,Acer Incorporated8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, TaiwanContact Person: Mr. RU Jan, e-mail:ru_jan@acer.com.twAnd,Acer Italy s.r.lVia Lepetit, 40, 20020 Lainate (MI) ItalyTel: +39-02-939-921, Fax: +39-02 9399-2913www.acer.itDeclare under our own responsibility that the product:Product: DLP ProjectorTrade Name: AcerModel Number: H7550ST/E155S/HE-815ST/H1P1403/H7550STz/H7550BD/E155D/HE-815J/H1P1406/H7550BDz/Z650/EG40S/HG-80ST/Q1P1504 seriesTo which this declaration refers conforms to the relevant standard or other standardizing documents:•EN55022:2010 Class B; EN 55024:2010•EN61000-3-2:2006+A1:2009+A2:2009, Class A•EN61000-3-3:2008•EN 60950-1:2006/A11:2009/A1:2010+A12:2011•Regulation (EC) No. 1275/ 2008; EN 62301:2005•EN50581:2012We hereby declare above product is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.Year to begin affixing CE marking 2014. Nov. 21, 2014 -RU Jan/Sr. Manager DateRegulation Center, Acer Inc.
49EnglishEnglishAcer America Corporation333 West San Carlos St.,Suite 1500San Jose, CA 95110 U. S. A.Tel: 254-298-4000Fax: 254-298-4147www.acer.comFederal Communications CommissionDeclaration of ConformityThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The following local Manufacturer /Importer is responsible for this declaration:Product: DLP Projector Model Number: H1P1403/H1P1406/Q1P1504 seriesName of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St.Suite 1500San Jose, CA 95110U. S. A.Contact Person: Acer Representative Phone No.: 254-298-4000 Fax No.: 254-298-4147

Navigation menu