ASUSTeK Computer Z00TD ASUS Phone User Manual

ASUSTeK Computer Inc ASUS Phone

User Manual

First Edition/ August 2015Model: ZE551KL (ASUS_Z00TD)Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.NOTE: For the latest updates and more detailed information, please visit www.asus.com.Front featuresSide featuresNOTE: Pry open the rear cover from the groove.Rear featuresNOTES:• RemovetherearcovertodisplaythedualmicroSIM and microSD card slots.• ThemicroSIMcardslotssupportLTE,WCDMA,and GSM/EDGE network bands. • ThemicroSDcardslotsupportsmicroSDandmicroSDHCcardformats.Charging your ASUS PhoneTo charge your ASUS Phone:1. ConnecttheUSBconnectorintothepoweradapter’sUSB port.2. ConnecttheotherendofthemicroUSBcabletoyour ASUS Phone. 3. Plug the power adapter into a wall socket.NOTES:• Useonlythepoweradapterthatcamewithyourdevice. Using a different power adapter may damage your device.• UsingthebundledpoweradapterandASUSPhonesignal cable to connect your ASUS Phone to a power outlet is the best way to charge your ASUS Phone.• TheinputvoltagerangebetweenthewalloutletandthisadapterisAC100V-240V.TheoutputvoltageofthemicroUSBcableisDC+5.2V,1A,5W.IMPORTANT!• WhenusingyourASUSPhonewhileitispluggedtoa power outlet, the grounded power outlet must be near to the unit and easily accessible.• WhenchargingyourASUSPhonethroughyourcomputer, ensure that you plug the micro USB cabletoyourcomputer’sUSB2.0/USB3.0port.• AvoidchargingyourASUSPhoneinanenvironment with ambient temperature of above 35oC(95oF). Touch screen displayReceiverLED indicatorTouch keysSensorFront cameraPower KeyAudio jackMicro USB portGrooveMicrophoneRear cameraCamera ashRear coverSpeakerLaser focusVolume key3123. Removethebattery.1. Locate the groove on the bottom-rightcornerofyourASUS Phone.Installing a micro SIM cardTo install a micro SIM card:2. Pry the cover loose and then pull the rear cover off. NOTE: The micro SIM card slot 1 is at the lower part of the micro SIM/ microSD combo card slot.4. InsertthemicroSIMcardintooneofthemicroSIMcard slots.Micro SIM/ microSD combo card slotMicro SIM card slot 2IMPORTANT: Both micro SIM card slots support 3G WCDMA/4GLTEnetworkband.ButonlyonemicroSIMcardcanconnectto3GWCDMA/4GLTEserviceat a time.1. Locate the groove on the bottom-rightcornerofyourASUS Phone.Installing a microSD cardTo install a microSD card:2. Pry the cover loose and then pull the rear cover off. 3. Removethebattery.4. InsertthemicroSDcardintothemicroSDcardslot.Micro SIM/ microSD combo card slotNOTE: The microSD card slot is at the upper part of the micro SIM/ microSD combo card slot.CAUTION: Do not use sharp tools or solvent on your device to avoid scratches on it.E10822User Guide
Copyright©2015ASUSTeKCOMPUTERINC.AllRightsReserved.You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, and shallremaintheexclusivepropertyofASUSand/oritslicensors.Nothingin this Manual intends to transfer any such rights, or to vest any such rights to you.ASUSPROVIDESTHISMANUAL“ASIS”WITHOUTWARRANTYOFANYKIND.SPECIFICATIONSANDINFORMATIONCONTAINEDINTHISMANUALAREFURNISHEDFORINFORMATIONALUSEONLY,ANDARESUBJECTTOCHANGEATANYTIMEWITHOUTNOTICE,ANDSHOULDNOTBECONSTRUEDASACOMMITMENTBYASUS.Prevention of Hearing LossTo prevent possible hearing damage, do not listen at high volume levels for long periods. For France, headphones/earphones for this device are compliant with the sound pressure level requirement laiddownintheapplicableEN50332-1:2013and/orEN50332-2:2013standardrequiredbyFrenchArticleL.5232-1.The charger• UseonlythechargersuppliedwithyourASUSPhone.• Neverpullthechargercordtodisconnectitfromthepower socket. Pull the charger itself.CautionYour ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markingsonthe(1)ACAdapter.• DonotusetheASUSPhoneinanextremeenvironment where high temperature or high humidity exists. The ASUS Phone performs optimallyinanambienttemperaturebetween-10°C(14°F)and35°C(95°F).• DonotdisassembletheASUSPhoneoritsaccessories. If service or repair is required, return the unit to an authorized service center. If the unit isdisassembled,ariskofelectricshockorremayresult.• Donotshort-circuitthebatteryterminalswithmetalitems.Operator access with a toolIfaTOOLisnecessarytogainaccesstoanOPERATORACCESSAREA,eitherallothercompartmentswithinthat area containing a hazard shall be inaccessible totheOPERATORbytheuseofthesameTOOL,orsuch compartments shall be marked to discourage OPERATORaccess.ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.Webelieveinprovidingsolutionsforyouto be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.Proper disposalRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.DONOTthrowthebatteryinmunicipalwaste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.DONOTthrowthisproductinmunicipalwaste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containingbuttoncellbattery)should not be placed in municipal waste. Checklocalregulationsfordisposalofelectronic products.DONOTthrowthisproductinre.DONOTshortcircuitthecontacts.DONOTdisassemble this product.ASUSAddress: 15 Li-Te Road, Peitou, Taipei, TaiwanTel: 886228943447Fax: 886228907698DeclarationWedeclarethattheIMEIcodesforthisproduct,ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards.Should you have any questions or comments regarding this matter, please contact us.Sincerely yours,ASUSTeK COMPUTER INC.Tel:886228943447Fax:886228907698Support: http://vip.asus.com/eservice/techserv.aspx15060-67700000thathasnotbeentestedorcertied,andusesuchaccessories should be avoided.CE RF Exposure ComplianceThisdevicemeetstheEUrequirements(1999/519/EC)on the limitation of exposure of the general public to electromagneticeldsbywayofhealthprotection.Forbody-wornoperation,thisdevicehasbeentestedandmeetstheICNIRPguidelinesandtheEuropeanStandardEN62209-2,forusewithdedicatedaccessories.SARismeasured with this device at a separation of 1.5 cm to thebody,whiletransmittingatthehighestcertiedoutputpower level in all frequency bands of this device. Use of other accessories which contain metals may not ensure compliancewithICNIRPexposureguidelines.CE Mark Warning56CE marking for devices with wireless LAN/ BluetoothThis equipment complies with the requirements of Directive1999/5/ECoftheEuropeanParliamentandCommissionfrom9March,1999governingRadioandTelecommunications Equipment and mutual recognition ofconformity.ThehighestCESARvaluesforthedeviceare as follows:• 0.361W/kg@10g(Head)• 0.313W/kg@10g(Body)Using GPS (Global Positioning System) on your ASUS PhoneTo use the GPS positioning feature on your ASUS Phone:• Ensure that your device is connected to the InternetbeforeusingGoogleMaporanyGPS-enabled apps.• Forrst-timeuseofaGPS-enabledapponyourdevice, ensure that you are outdoors to get the best positioning data.• WhenusingaGPS-enabledapponyourdeviceinside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.Safety informationASUS Phone care• UseyourASUSPhoneinanenvironmentwithambienttemperaturesbetween-10°C(14°F)and35°C(95°F).The batteryYour ASUS Phone is equipped with a high performance detachableLi-Ionbattery.Observethemaintenanceguidelines for a longer battery life.• Avoidcharginginextremelyhighorlowtemperature.The battery performs optimally in an ambient temperatureof+5°Cto+35°C.• UseonlyASUSbattery.Usingadifferentbatterymay cause physical harm/injury and may damage your device.• Donotremoveandsoakthebatteryinwateroranyother liquid.• Nevertrytoopenthebatteryasitcontainssubstances that might be harmful if swallowed or allowed to come into contact with unprotected skin.• Donotremoveandshort-circuitthebattery,asitmayoverheatandcauseare.Keepitawayfromjewelry or metal objects.• Donotremoveanddisposeofthebatteryinre.Itcould explode and release harmful substances into the environment.• Donotremoveanddisposeofthebatterywithyourregular household waste. Take it to a hazardous material collection point.• Donottouchthebatteryterminals.NOTES:• Riskofexplosionifbatteryisreplacedbyanincorrect type.• Disposeofusedbatteryaccordingtotheinstructions.Laser Safety Information Class 1 LASER PRODUCTRegional notice for SingaporeThis ASUS Phone complies with IDA Standards.ZenTalk Fans Forum (http://www.asus.com/zentalk/global_forward.php)Federal Communications Commission StatementThisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changesormodicationsnotexpresslyapprovedbytheparty responsible for compliance could void the user‘s authority to operate the equipment.This equipment has been tested and found to comply with thelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorientorrelocatethereceivingantenna.- Increasetheseparationbetweentheequipmentandreceiver.- Connecttheequipmentintoanoutletonacircuitdifferent from that to which the receiver is connected.- Consultthedealeroranexperiencedradio/TVtechnician for help.Theantenna(s)usedforthistransmittermustnotbeco-located or operating in conjunction with any other antenna or transmitter.Thecountrycodeselectionisfornon-USmodelonlyandisnotavailabletoallUSmodel.PerFCCregulation,allWiFiproductmarketedinUSmustxedtoUSoperationchannels only.TheFCCIDforthisdeviceisMSQZ00TD.ThehighestFCCSARvalueforthedeviceis1.37W/kg@1g.Canada, Industry Canada (IC) NoticesThisdevicecomplieswithIndustryCanada’slicence-exemptRSSs.Operationissubjecttothefollowingtwoconditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes: (1) l'appareilnedoitpasproduiredebrouillage,et(2) l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectrique subi, même si le brouillage est susceptibled'encompromettrelefonctionnement."CAN ICES-3(B)/NMB-3(B)ThisClassBdigitalapparatuscomplieswithCanadianICES-003.CetappareilnumériquedelaclasseBestconformeàlanormeNMB-003duCanada.TheICIDforthisdeviceis3568A-Z00TD.L’identiantIndustrieCanadadecetappareilest:3568A-Z00TD.RF Exposure Information (SAR)ToreduceexposuretoRFenergy,useahands-freeaccessory or other similar option to keep this device awayfromyourheadandbody.Carrythisdeviceatleast15 mm away from your body to ensure exposure levels remainatorbelowtheas-testedlevels.Choosethebeltclips,holsters,orothersimilarbody-wornaccessorieswhich do not contain metallic components to support operationinthismanner.CaseswithmetalpartsmaychangetheRFperformanceofthedevice,includingitscompliancewithRFexposureguidelines,inamanner

Navigation menu