ASUSTeK Computer W5G00UGPZ50 NOTEBOOK P.C. BLUETOOTH DEVICE User Manual USERS MANUAL 2

ASUSTeK Computer Inc NOTEBOOK P.C. BLUETOOTH DEVICE USERS MANUAL 2

USERS MANUAL 2

Introduction 第 49 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Dial-up Connection] window will appear.2. Confirm that "Direct connection" has been selected under [Connection Destination], and then click on the [Connect] button A connection will be initiated. {This is an example of what happens when you use "Direct connection" as a connection name under "Connect to access point." If a name different from the connection name is used, that name will appear under [Connection Destination]. {Please simply click on [Settings] if no user name or password have been entered (i.e., if those fields have been left blank){Please change the connection destination if a different connection name (for a dial-up connection) appears in [Connection Destination].Related topic→"Changing the default connection destination" Once you connect to the network, Internet Explorer will start automatically, and you will be able to exchange data with other computers on the network.{Please follow the procedure below if you need to set up a proxy server to connect to the Internet (the following procedure is not necessary if the PC you are going to use has already been set up as a proxy server).1 Select [Internet Options...] from the [Tools] menu in Internet Explorer　The [Internet Options] window will appear.2 Click on the [Connections] tab, and then click on the [Settings...] buttonNoteNote
Introduction 第 50 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30　3 Enter the IP address and port number of the proxy server under [Proxy Server], and then click on the [OK] button　 3. End the connection Right-click either on the connection icon under the [Bluetooth Settings] window or on the icon in the task tray, and then click on [Disconnect].Click on the "Yes" button in the disconnection confirmation dialog box that appears.
Introduction 第 51 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 This section describes how to connect to a network (for example, a company LAN or a personal home network) using a PAN profile-compatible access point.Please refer to "Using an access point (LAP) to connect to a LAN" if you are using a LAP profile-compatible access point.→Setting up the access point→Connecting to a LAN (PAN) zThe access point must be started and a normal connection already established to the network before the access point is set up. Please refer to the access point instruction manual for information on how to set up the access point. zA Bluetooth passkey (PIN code) is required for you to connect to the access point. Please make a note of your Bluetooth passkey before you start the set-up process. 1. Turn on the access point, and confirm that a connection has been established with the network2. Right-click the Bluetooth icon in the task tray, and then click on [Add New Connection]ImportantSetting up the access pointProcedureConnecting to a LAN using an access point (PAN) [PAN]
Introduction 第 52 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30{Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the active [Bluetooth Settings] window. The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear. 3. Confirm that [Express Mode] has been selected, and then click on the [Next] button The [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear.Once the program has finished searching for the devices, the [Add New Connection Wizard (Device Selection)] window will appear. 4. Select the device name of the access point from [Device List], and then click on the Note
Introduction 第 53 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30[Next] buttonThe [Add New Connection Wizard (Searching for Services)] window will appear. You will be asked for the Bluetooth passkey in the window that appears.5. Enter the passkey under [Bluetooth Passkey (PIN code)], and then click on the [OK] button
Introduction 第 54 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Service detection and COM port creation will be performed automatically.The [Add New Connection Wizard (Connection Name Settings)] window will appear. 6. Enter the type and name of the icon displayed after registration, and then click on the [Next] buttonPlease click on the [Next] button if you are satisfied with the settings.The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will appear.7. Click on the [Finish] buttonThe access point icon will be registered in the [Bluetooth Settings] window. This will complete the access point set-up process.→"Connecting to a LAN (PAN)" Connecting to a LAN (PAN)
Introduction 第 55 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/301. Right-click on the connection icon in the [Bluetooth Settings] window, and then click on [Connect]You will be asked for the Bluetooth passkey in the window that appears.2. Enter the passkey under [Bluetooth Passkey (PIN code)], and then click on the [OK] buttonA connection will be initiated. Once you have connected to the network, Internet Explorer will start automatically, and you will be able to exchange data with other computers on the network.{Please follow the procedure below if you need to set up a proxy server to connect to the Internet (the following procedure is not necessary if the PC you are going to use has already been set up as a proxy server). 1 Select [Internet Options...] from the [Tools] menu in Internet Explorer　The [Internet Options] window will appear. 2 Click on the [Connections] tab, and then click on the [LAN Settings...] button ProcedureNote
Introduction 第 56 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30　3 Enter the IP address and port number of the proxy server under [Proxy Server], and then click on the [OK] button　 3. End the connection Right-click either on the connection icon under the [Bluetooth Settings] window or on the icon in the task tray, and then click on [Disconnect].Click on the "Yes" button in the disconnection confirmation dialog box that appears.
Introduction 第 57 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 You can use the PAN profile to build a network of Bluetooth -enabled devices. →Operating as a server→Operating as a clientA personal area network comprises a client -server architecture. The device to which other devices connect is called the "server", and a device that connects to the server is called a "client."The client-server relationship is not necessarily a fixed one. The first of two devices to establish a connection can be the server when one other device is present, and can be the client in other instances.zThe maximum total number of devices that can be used to constitute a single personal area network is seven: one server and six clients.A network comprising as many as seven devices could theoretically be built, but an operating environment that involves the use of other Bluetooth devices, leaving aside other complications, might require the network to comprise fewer components..By using the PAN profile, you will be able to build a network that uses the same TCP/IP protocol used in regular LANs. Accordingly, the machine designated as the server can be used for configuration tasks that utilize DHCP, such as assigning IP addresses to clients.NoteBuilding a personal area network [PAN]
Introduction 第 58 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30g,ggIn addition, you will be able to configure folder and file sharing, which will allow data to be browsed by other servers or clients on the network.　　　　zPlease refer to Windows Help for further information on TCP/IP, DHCP and configurations for sharing. The following icon will appear in the tasktray when the PAN server function has been activated.Should the icon not appear, please follow the procedure below to activate the PAN server function.1. Right-click the Bluetooth icon in the task tray and make sure the Option [Use PAN Group Ad-hoc Network] is enabled. A message will appear asking you to confirm whether you wish to activate the PAN group ad-hoc network. 2. Click the [Yes] button ImportantOperating as a server
Introduction 第 59 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30[]The PAN server will be activated, and an icon will accordingly appear in the tasktray. Other devices that use the PAN profile will now be able to connect over the network. zWhen using the device as the server, make sure that all user accounts have a password set for the security reasons. By clicking on the icon, the [Bluetooth PAN Server] window will appear. In the graphic below, one client has established a connection. zWhen you try to connect to another server as a client, the task tray icon will disappear, and your machine will not be able to function as a server in response to connection requests originating from other devices.Connecting to a server as a client is performed from the [Bluetooth Settings] window, as described below.1. Right-click on the Bluetooth icon in the task tray, and click on [Add New Connection] ImportantNoteOperating as a clientProcedureNote
Introduction 第 60 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30{Alternatively, click on [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then on [New Connection] from the [Bluetooth Settings] window. 2. Confirm that [Express Mode] has been selected, and then click on the [Next] button 3. Click on the [Next] button in the advisory dialog boxThe [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear. Once the program has finished searching for the devices, the [Add New Connection Wizard (Device Selection)] window will appear.4. Select the name of the device designated as the server from [Device List], and then click on the [Next] button
Introduction 第 61 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Add New Connection Wizard (Searching for Services)] window will appear. The [Add New Connection Wizard (Confirm Connection Name)] window will appear. 5. Click on the [Next] button
Introduction 第 62 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The registered icon will appear in the [Bluetooth Settings] window.■Connecting to a server1. Right-click on the icon in the [Bluetooth Settings] window, and then click on [Connect]Once you have connected, the icon will change to indicate that the device is connected. ■Ending a connection to a server1. Right-click on the icon in the [Bluetooth Settings] window, and then click on [Disconnect]ProcedureProcedure
Introduction 第 63 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30A message confirming whether you wish to disconnect will appear. Click on the [Yes] button.Once you have disconnected, the icon will change to indicate that the device is not connected. This section describes how to send a fax using a Bluetooth wireless modem station.→Setting up the modem station→Installing a modem →Setting fax information→Sending a faxUsing a modem station for fax transmissions [FAX]
Introduction 第 64 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30g→Receiving a faxzPlease refer to the modem station instruction manual for information on how to connect the station to a telephone line. zPlease ensure that any drivers used to connect the PC to the modem have been installed.zA Bluetooth passkey (PIN code) is required for you to connect to the modem station. Please make a note of your Bluetooth passkey before you start the set -up process.zA fax application is required for you to be able to send and receive faxes. The description below is based on a example using Microsoft Fax, which is installed with Windows XP as standard. If you are going to use a commercially available fax application , then please refer to the manual that came with the application for information on how to send and receive faxes. Set up and register the modem station as a fax service.1. Turn on the wireless modem station2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New Connection] {Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the active [Bluetooth Settings] window. The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear.3. Select [Custom Mode], and then click on the [Next] buttonImportantSetting up the modem stationProcedureNote
Introduction 第 65 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 The [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear.Once the program has finished searching for the devices, the [Add New Connection Wizard (Select Device)] window will appear.4. Select the device name of the wireless modem station from [Device List], and then click on the [Next] button
Introduction 第 66 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 The [Add New Connection Wizard (Searching for Services)] window will appear. 5. If you are connecting to the wireless modem station for the first time, enter the passkey for the device from the [Bluetooth Passkey (PIN Code)] window, and then click on the [OK] buttonOnce the program has finished searching for the services, the [Add New Connection Wizard (Select Service)] window will appear.6. Select "Fax" under [Select Service], and then click on the [Next] button
Introduction 第 67 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Add New Connection Wizard (Connecting to Remote Device)] screen will appear.The COM port and modem registration process will then be automatically performed. Once the COM port and modem (standard 33600 bps type) registration is complete,the [Add New Connection Wizard (Setting Connection Name)] screen will appear.7. Configure the type and name of the icon to appear after registration,and click on the [Next] button.Please click only on the [Next] button once you are satisfied with the configuration. The [Add New Connection Wizard (Completing the Add New Connection Wizard)] screen will appear.
Introduction 第 68 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/308. Click on the [Finish] buttonThe settings will be registered, and the icon will appear on the [Bluetooth Settings] screen. Configure send/receive settings and register fax information. 1. Select [Start]→[Control Panel], and then double-click on the [Printers and Other Hardware] icon{If the control panel is displayed in "Classic view", and you use Windows 2000, please start from Step (2). 2. Double-click on the [Printers and Faxes] iconThe [Printers & Faxes] window will appear.3. Click on "Install a local fax printer" in the [Printers and Faxes] windowA window showing installed programs will appear, and a Fax icon will have been Setting FAX informationProcedureNote
Introduction 第 69 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30created in the [Printers and Faxes] screen.4. Click on "Send a fax" under "Printer Tasks" on the left side of the windowIf you have not yet configured a fax device, the [Fax Configuration Wizard] window will appear. In the window you can enter settings pertaining to the sender (yourself). {If the fax configuration information has already been registered, the [Send Fax Wizard] window, which can be viewed under " Sending a fax" below, will appear instead of the [Fax Configuration Wizard] window. 5. Enter the sender information, and click on the [Next] buttonNote
Introduction 第 70 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 {The sender information that you configure here will be automatically appended as header information when you send a fax. The [Fax Configuration Wizard (Select Device for Sending or Receiving Faxes)] window will appear.6. Select a device to be used for fax transmissions, enable the device for sending or receiving, and then click on the [Next] button{If [Enable Receive] is selected, the device will be on standby for receiving faxes even if it is not sending or receiving anything, and therefore will be in continuous connection to the wireless modem (when COM Auto Connect is on).Please decide whether to select this option based on the desired objective and/or frequency of transmission. The [Fax Configuration Wizard (Transmitting Subscriber Identification (TSID))] window will appear.7. Click on the [Next] buttonIt is important that you do not change the transmitter subscriber identification. NoteNote
Introduction 第 71 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 The [Fax Configuration Wizard (Completing the Fax Configuration Wizard)] window will appear. 8. Click on the [Finish] buttonThe fax information will be have been registered, and the [Fax Console] window will appear.This will complete the fax set-up process. Related topics: "Sending a fax" and "Receiving a fax"This section describes how to send a fax from the Fax Console. ImportantSending a fax
Introduction 第 72 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zThe Fax service must be enabled for sending in order for you to send a fax.Please refer to "Using a wireless modem station " under "Troubleshooting" for how to change the send and receive settings once the service has been configured. 1. Double-click on the [Fax] icon in the Control Panel The [Fax Console] window will appear.2. In the [Fax Console] window, click [File] →[Send fax]The [Send Fax Wizard (Starting the Send Fax Wizard)] window will appear. 3. Click on the [Next] buttonImportantProcedure
Introduction 第 73 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Send Fax Wizard (Recipient Information)] window will appear.4. Enter the name and fax number of the destination party, and then click on the [Next] buttonThe [Send Fax Wizard (Preparing the Cover Page)] window will appear.5. Specify the cover page template, subject line, and note (body text), and then click on the [Next] buttonThe [Send Fax Wizard (Schedule)] window will appear. 6. If you wish to send the fax immediately, select "Now", and then click on the [Next] button
Introduction 第 74 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Send Fax Wizard (Completing the Send Fax Wizard)] window will appear.7. Confirm the destination information and transmission details, and then click on the [Finish] buttonThe software will automatically dial the number and send the fax.Once the fax has been sent, Fax Monitor will revert to standby mode.
Introduction 第 75 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 ,y Related topic: "Receiving a fax" This section describes what to do when a fax arrives after you have established a connection to a modem station.zThe Fax service must be enabled for receiving in order for you to receive a fax.Please refer to "Using a wireless modem station " under "Troubleshooting" for information on how to change the send and receive settings once the fax service has been configured. zPlease ensure you have connected to a modem station before you receive a fax (the device will be connected to the modem if "Enable Receive" has been selected or COM Auto Connect has been activated). 1. When a fax arrives, the Fax Monitor will start automatically as the fax is received Once the fax has been received, the Fax Monitor will revert to standby mode. {If you have enabled manual fax reception, the message below will appear when a fax arrives.ImportantProcedureNoteReceiving a fax
Introduction 第 76 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Click on the message with your mouse to receive the fax.2. Double-click on the [Fax] icon in the Control PanelThe [Fax Console] window will appear.3. In the [Fax Console] window, double-click on the fax that has arrivedAn image of the received fax will be displayed.Related topic: "Sending a fax"
Introduction 第 77 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 This section describes how to send a fax using a mobile telephone as a modem. →Setting up the mobile telephone→Installing a modem→Setting fax information→Sending a fax→Receiving a faxzPlease ensure that any drivers used to connect the PC to the mobile telephone have been installed.zA Bluetooth passkey (PIN code) is required for you to connect to the mobile telephone. Please make a note of your Bluetooth passkey before you start the set -up process.zA fax application is required for you to be able to send and receive faxes. The description below is based on a example using Microsoft Fax, which is installed with Windows XP as standard.If you are going to use a commercially available fax application , then please refer to the manual that came with the application for information on how to send and receive faxes. Set up and register the mobile telephone as a fax service.1. Turn on the mobile telephone, and set it to be connectable via Bluetooth{Please refer to the instruction manual for information on how to operate the telephone. 2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New Connection]ImportantSetting up the mobile telephoneProcedureNoteUsing a mobile telephone for fax transmissions [FAX]
Introduction 第 78 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 {Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the active [Bluetooth Settings] window. The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear.3. Select [Custom Mode], and then click on the [Next] button The [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear.Note
Introduction 第 79 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Once the program has finished searching for the devices, the [Add New Connection Wizard (Select Device)] window will appear.4. Select the device name of the mobile telephone from [Device List], and then click on the [Next] button The [Add New Connection Wizard (Searching for Services)] window will appear. 5. If you are connecting to the mobile telephone for the first time, enter the passkey for the device from the [Bluetooth Passkey (PIN Code)] window, and then click on the [OK] button.
Introduction 第 80 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Once the program has finished searching for the services, the [Add New Connection Wizard (Select Service)] window will appear.6. Select "Fax" under [Select Service], and then click on the [Next] buttonThe [Add New Connection Wizard (Connecting to Remote Device)] screen will appear.The COM port and modem registration process will then be automatically performed.
Introduction 第 81 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 Once the COM port and modem (standard 33600 bps type) registration is complete,the [Add New Connection Wizard (Setting Connection Name)] screen will appear.7. Configure the type and name of the icon to appear after registration, and click on the [Next] button. Please click only on the [Next] button once you are satisfied with the configuration.The [Add New Connection Wizard (Completing the Add New Connection Wizard)] screen will appear. 　　8.　Click on the [Finish] button The settings will be registered, and the icon will appear on the [Bluetooth Settings] screen.　　　　 Configure send/receive settings and register fax information. 1. Select [Start]→[Control Panel], and then double-click on the [Printers and Other Hardware] icon {If the control panel is displayed in "Classic view", and you use Windows 2000, please start from Step (2). 2. Double-click on the [Printers and Faxes] iconThe [Printers & Faxes] window will appear.Setting fax informationProcedureNote
Introduction 第 82 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/303. Click on "Set up faxing" in the [Printers and Faxes] windowA window showing installed programs will appear, and a Fax icon will have been created in the [Printers and Faxes] screen.4. Click on "Send a fax" under "Printer Tasks" on the left side of the window
Introduction 第 83 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30If you have not yet configured a fax device, the [Fax Configuration Wizard] window will appear. In the window you can enter settings pertaining to the sender (yourself). {If the fax configuration information has already been registered, the [Send Fax Wizard] window, which can be viewed under " Sending a fax" below, will appear instead of the [Fax Configuration Wizard] window. 5. Enter the sender information, and click on the [Next] button {The sender information that you configure here will be automatically appended as header information when you send a fax. The [Fax Configuration Wizard (Select Device for Sending or Receiving Faxes)] window will appear. 6. Select a device to be used for fax transmissions, enable the device for sending or receiving, and then click on the [Next] buttonNoteNote
Introduction 第 84 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30{If [Enable Receive] is selected, the device will be on standby for receiving faxes even if it is not sending or receiving anything, and therefore will be in continuous connection to the wireless modem （when COM Auto Connect is on).Please decide whether to select this option based on to the desired objective and/or frequency of transmission. The [Fax Configuration Wizard (Transmitting Subscriber Identification (TSID))] window will appear.　 7. Click on the [Next] buttonIt is important that you do not change the transmitter subscriber identification.The [Fax Configuration Wizard (Completing the Fax Configuration Wizard)] window will appear. 8. Click on the [Finish] buttonNote
Introduction 第 85 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The fax information will be have been registered, and the [Fax Console] window will appear.This will complete the fax set-up process. Related topics: "Sending a fax" and "Receiving a fax" This section describes how to send a fax from the Fax Console. zThe Fax service must be enabled for sending in order for you to send a fax.Please refer to "Using a mobile telephone" under "Troubleshooting" for how to change the send and receive settings once the service has been configured."" 1. Double-click on the [Fax] icon in the Control PanelThe [Fax Console] window will appear. ImportantProcedureSending a fax
Introduction 第 86 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/302. In the [Fax Console] window, click [File] →[Send fax]The [Send Fax Wizard (Starting the Send Fax Wizard)] window will appear. 3. Click on the [Next] buttonThe [Send Fax Wizard (Recipient Information)] window will appear.4. Enter the name and fax number of the destination party, and then click on the [Next] button
Introduction 第 87 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Send Fax Wizard (Preparing the Cover Page)] window will appear. 5. Specify the cover page template, subject line, and note (body text), and then click on the [Next] buttonThe [Send Fax Wizard (Schedule)] window will appear.6. If you wish to send the fax immediately, select "Now", and then click on the [Next] buttonThe [Send Fax Wizard (Completing the Send Fax Wizard)] window will appear. 7. Confirm the destination information and transmission details, and then click on the [Finish] button
Introduction 第 88 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 The software will automatically dial the number and send the fax.Once the fax has been sent, Fax Monitor will revert to standby mode.Related topic: "Receiving a fax" This section describes what to do when a fax arrives after you have established a connection to a modem station.Receiving a fax
Introduction 第 89 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zThe Fax service must be enabled for receiving in order for you to receive a fax. Please refer to "Using a mobile telephone" under "Troubleshooting" for information on how to change the send and receive settings once the fax service has been configured.zPlease ensure you have connected to a modem station before you receive a fax (the device will be connected to the modem if "Enable Receive" has been selected or COM Auto Connect has been activated). 1. When a fax arrives, the Fax Monitor will start automatically as the fax is received Once the fax has been received, the Fax Monitor will revert to standby mode. {If you have enabled manual fax reception, the message below will appear when a fax arrives.Click on the message with your mouse to receive the fax.2. Double-click on the [Fax] icon in the Control PanelThe [Fax Console] window will appear.3. In the [Fax Console] window, double-click on the fax that has arrivedImportantProcedureNote
Introduction 第 90 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 An image of the received fax will be displayed.Related topic: "Sending a fax"This section describes how to use a Bluetooth -compatible printer for printing.When printing using Bluetooth, the methods for configuring and using the printer will vary with the corresponding profile.Types of printer functionsProfile Bluetooth Settings OperationHCRP (*1) You must register the printer in Bluetooth SettingsAllows you to print from various applications, as with ordinary cable-connected printers.→"Printing document and images"SPPOPP (*2) Not required Allows you to print business card data directly.→"Printing business card data"BIP Not required Allows you to print image data directly. →"Printing images directly from a digital camera Printing
Introduction 第 91 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 z(*1) The majority of Bluetooth-compatible printers support HCRP.If you have selected Express Mode, HCRP will be chosen as the default profile. If the printer does not support HCRP, then SPP will be the next choice. z(*2) The printing of business cards using OPP complies exclusively with the business card (vCARD) standard. or other device"NoteThis section describes how to print using a Bluetooth -compatible printer. →Setting up the printer→Printing zPlease ensure that any printer-specific drivers have been installed on the PC before you have established a Bluetooth connection. zA Bluetooth passkey (PIN code) is required for you to connect to the printer. Please make a note of your Bluetooth passkey before you start the set -up process. 1. Turn on the printer2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New Connection]ImportantSetting up the printerProcedurePrinting documents and images [HCRP] [SPP]
Introduction 第 92 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 {Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the active [Bluetooth Settings] window. The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear.3. Confirm that [Express Mode] has been selected, and then click on the [Next] buttonThe [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear.Note
Introduction 第 93 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Once the program has finished searching for the devices, the [Add New Connection Wizard (Device Selection)] window will appear.4. Select the device name of the printer from [Device List], and then click on the [Next] buttonThe [Add New Connection Wizard (Searching for Services)] window will appear. 5. If you are connecting to the printer for the first time, enter the passkey for the device from the [Bluetooth Passkey (PIN Code)] window, and then click on the [OK] button.
Introduction 第 94 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Once the services have been detected successfully, connection to the device and creation of the HCRP port will be performed automatically. If you have not yet installed a printer, a message prompting you to install a printer will appear.6. Click on the [OK] buttonThe [Add Printer Wizard (Starting the Add Printer Wizard)] window will appear.7. Click on the [Next] buttonThe [Add Printer Wizard (Local Printer or Network Printer)] window will appear.8. Select "Local printer attached to this computer", remove the check next to "Automatically detect and install my Plug and Play printer", and then click on the [Next] button
Introduction 第 95 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 The [Add Printer Wizard (Select Printer Port)] window will appear.9. Select the desired port, and then click on the [Next] buttonThe [Add Printer Wizard (Install Printer Software)] window will appear.10. Select the [Manufacturer] and [Printer] as pertains to the printer to be installed, or click on the [Use Device] button, and then click on the [Next] button
Introduction 第 96 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 Please install the printer according to the instructions in the windows that follow.Once installation is complete, a message of confirmation will appear in the [Add New Connection Wizard (Printer Settings)] window.11. Click on [Next]The [Add New Connection Wizard (Connection Name Settings)] window will appear.12. Enter the type and name of the icon displayed after registration, and then click on the [Next] buttonPlease click on the [Next] button if you are satisfied with the settings.

Navigation menu