ASUSTeK Computer W1V2915ABG Notebook P.C. User Manual 01 32 W1V p65 p 16 17

ASUSTeK Computer Inc Notebook P.C. 01 32 W1V p65 p 16 17

Contents

user manual

E2083 / May 2005Notebook PCHardware User’s ManualDV
2Contents1. Introducing the Notebook PC ..................................................................5About This User’s Manual..........................................................................................6Notes For This Manual ..........................................................................................6Preparing your Notebook PC .....................................................................................92. Knowing the Parts...................................................................................11Top Side ...................................................................................................................12Bottom Side .............................................................................................................14Left Side ...................................................................................................................16Right Side ................................................................................................................18Front Side ................................................................................................................193. Getting Started ....................................................................................... 21Power System ..........................................................................................................22Using AC Power ..................................................................................................22Using Battery Power............................................................................................22Charging the Battery Pack ..................................................................................22Powering ON the Notebook PC ..........................................................................24The Power-On Self Test (POST) .........................................................................24Battery Care ........................................................................................................24Checking Battery Power......................................................................................25Restarting or Rebooting ......................................................................................26Powering OFF .....................................................................................................26Special Keyboard Functions ....................................................................................27Colored Hot Keys ................................................................................................27Keyboard as Cursors...........................................................................................28Microsoft Windows™ Keys .................................................................................28Keyboard as a Numeric Keypad .........................................................................29Instant Launch Keys and Status Indicators .............................................................29Instant Launch Keys ............................................................................................29Status Indicators (top–right) ................................................................................30Status Indicators (front) .......................................................................................31Audio/Video Remote Controller (on selected models) ........................................32
3Contents4. Using the Notebook PC ......................................................................... 33Operating System ....................................................................................................34Support Software.................................................................................................34Pointing Device ........................................................................................................34Using the Touchpad.............................................................................................35Touchpad Usage Illustrations ..............................................................................36Caring for the Touchpad ......................................................................................37Removing a PC Card (PCMCIA) .........................................................................38Inserting a PC Card (PCMCIA) ...........................................................................38Storage Devices.......................................................................................................39PC Card (PCMCIA) Socket .................................................................................39Optical Drive ........................................................................................................40Flash Memory Card Reader ................................................................................42Modem Connection .............................................................................................42Hard Disk Drive ...................................................................................................43Network Connection ............................................................................................44Power Management Modes .....................................................................................45Full Power Mode & Maximum Performance........................................................45ACPI ....................................................................................................................45Suspend Mode ....................................................................................................45Power Savings ....................................................................................................45Stand by and Hibernate.......................................................................................47Audio/Video Connections ....................................................................................48Appendix ..................................................................................................... 49Optional Accessories ...............................................................................................50Optional Connections...............................................................................................54Glossary ...................................................................................................................57Declarations and Safety Statements .......................................................................60Notebook PC Information.........................................................................................68
4Contents
51. Introducing the Notebook PCAbout This User’s ManualNotes For This ManualSafety PrecautionsPreparing your Notebook PC
61 Introducing the Notebook PCAbout This User’s ManualYou are reading the Notebook PC User’s Manual. This User’s Manual provides information on thevarious components in the Notebook PC and how to use them. The following are major sections of thisUser’s Manuals:1. Introducing the Notebook PCIntroduces you to the Notebook PC and this User’s Manual.2. Knowing the PartsGives you information on the Notebook PC’s components.3. Getting StartedGives you information on getting started with the Notebook PC.4. Using the Notebook PCGives you information on using the Notebook PC’s components.5. AppendixIntroduces you to optional accessories and gives additional information.Notes For This ManualA few notes and warnings in bold are used throughout this guide that you should be aware of in order tocomplete certain tasks safely and completely. These notes have different degrees of importance asdescribed below:NOTE: Tips and information for spe-cial situations.TIP: Tips and useful information forcompleting tasks.Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the <> or [ ] and the enclosed letters.< >[ ]WARNING! Important information thatmust be followed for safe operation.IMPORTANT! Vital information thatmust be followed to prevent damageto data, components, or persons.User’s ManualNote: For equipments marketed in the U.S., operation in the 2.4GHz band is restricted to channel 1-11 by dedicated firmware.
7Introducing the Notebook PC 1Safety PrecautionsThe following safety precautions will increase the life of the Notebook PC. Follow all precautions andinstructions. Except as described in this manual, refer all servicing to qualified personnel. Do not usedamaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners,benzene, or other chemicals on or near the surface.Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe theNotebook PC using a clean cellulose sponge or chamois cloth dampened with a solu-tion of nonabrasive detergent and a few drops of warm water and remove any extramoisture with a dry cloth.DO NOT expose to or use near liq-uids, rain, or moisture. DO NOT usethe modem during an electrical storm.DO NOT expose to dirty or dusty en-vironments. DO NOT operate duringa gas leak.DO NOT expose to strong magneticor electrical fields.DO NOT expose to extreme temperaturesabove 50˚C (122˚F) or to direct sunlight.Do not block the fan vents!DO NOT place on uneven or unstablework surfaces. Seek servicing if thecasing has been damaged.DO NOT place or drop objects on topand do not shove any foreign objectsinto the Notebook PC.DO NOT press or touch the displaypanel. Do not place together with smallitems that may scratch or enter the Note-book PC.DO NOT leave the Notebook PC onyour lap or any part of the body whilethe Notebook PC is turned ON or ischarging in order to prevent discom-fort or injury from heat exposure.DO NOT throw batteries in fires asthey may explode. Check local codesfor special battery disposal instruc-tions.DO NOT expose to extreme tempera-tures (below 0˚C (32˚F), otherwise theNotebook PC may not boot.Safe Operating Temperatures: Thisnotebook PC should be used in envi-ronments with ambient temperaturesbetween 0°C/32°F and 30°C/86°F.30°C/86°F0°C/32°F
81 Introducing the Notebook PCTransportation PrecautionsTo prepare the Notebook PC for transport, you should turn it OFF and discon-nect all external peripherals to prevent damage to the connectors. The harddisk drive’s head retracts when the power is turned OFF to prevent scratchingof the hard disk surface during transport. Therefore, you should not transportthe Notebook PC while the power is still ON. Close the display panel and checkthat it is latched securely in the closed position to protect the keyboard anddisplay panel.Cover Your Notebook PCUse a carrying case such as the one supplied with your Notebook PC to protect it from dirt, water,shock, and scratches.Charge Your BatteriesIf you intend to use battery power, be sure to fully charge your battery pack and any optional batterypacks before going on long trips. Remember that the power adapter charges the battery pack as long asit is plugged into the computer and an AC power source. Be aware that it takes much longer to chargethe battery pack when the Notebook PC is in use.Airplane PrecautionsContact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restric-tions for using electronic devices. Most airlines will allow electronic use only between and not duringtakeoffs and landings.CAUTION! There are three main types of airport security devices: X-ray machines(used on items placed on conveyor belts), magnetic detectors (used on people walk-ing through security checks), and magnetic wands (hand-held devices used on peopleor individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC ordiskettes through airport magnetic detectors or expose them to magnetic wands.NOTE: The surface glaze is easily dulled if not properly cared for. Be careful not to rubor scrap the Notebook PC surfaces when transporting your Notebook PC.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
9Introducing the Notebook PC 1Preparing your Notebook PCThese are only quick instructions for using your Notebook PC. Read the later pages for detailed infor-mation on using your Notebook PC.1. Install the battery pack3. Open the Display Panel 4. Turn ON the Notebook PC2. Connect the AC Power AdapterPress the power button and release.(In Windows XP, this button can also be used tosafely turn OFF the Notebook PC.)12DV321WARNING! When opening, do not force the display panel down to the table or elsethe hinges may break! Never lift the Notebook PC by the display panel!This Notebook PC features a latchless design.Lift the display panel with one hand while hold-ing the system portion with your other hand.
101 Introducing the Notebook PC
112. Knowing the PartsBasic sides of the Notebook PC
122 Knowing the PartsTop SideRefer to the diagram below to identify the components on this side of the Notebook PC. Details aregiven starting from the top and going clockwise.Display Panel (Use a softcloth without chemicalliquids to clean. Use plainwater if necessary.)KeyboardTouchpadAudio Jacks(see section 3)Instant Keys (see section 3)Touchpad buttonsStatus Indicators (see section 3)Status Indicators(see section 3)Power Switch (see section 3)CIR Port(see front side)
13Knowing the Parts 2Touchpad and ButtonsThe touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse.A software-controlled scrolling function is available after setting up the included touchpad utility toallow easy Windows or web navigation.KeyboardThe keyboard provides full-sized keys with comfortable travel (depth at which the keys can be de-pressed) and palm rest for both hands. Two Windows™ function keys are provided to help ease naviga-tion in the Windows™ operating system.Display PanelThe display panel functions the same as a desktop monitor. The Notebook PC uses an active matrixTFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop monitors,the LCD panel does not produce any radiation or flickering, so it is easier on the eyes.Stereo SpeakersThe built-in stereo speaker system allows you to hear audio without additional attachments. The multi-media sound system features an integrated digital audio controller that produces rich, vibrant sound(results improved with external stereo headphones or speakers). Audio features are software controlled.Power SwitchThe power switch allows powering ON and OFF the Notebook PC and recovering from STD. Push theswitch once to turn ON and once to turn OFF the Notebook PC. The power switch only works when thedisplay panel is opened.
142 Knowing the PartsBottom SideRefer to the diagram below to identify the components on this side of the Notebook PC. Details aregiven starting from the top and going clockwise.IMPORTANT! The bottom of the Notebook PC can get very hot. Be careful when han-dling the Notebook PC while it is in operation or recently been in operation. Hightemperatures are normal during charging or operation. DO NOT PUT THE NOTEBOOKPC ON THE LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.Air VentsThe air vents allow cool air to enter and warm air to exit the Notebook PC.IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do notblock any of the air vents or else overheating of the Notebook PC may occur.Battery PackBattery LockShutdownButtonSub-WooferSpeakerSpring BatteryLockCooling Fanand Air VentsCPUCompartmentTV-TunerCompartmentHard Disk DriveCompartmentMemoryCompartment
15Knowing the Parts 2Hard Disk Drive CompartmentThe hard disk drive is secured in a compartment. Hard disk drive upgrades are to be done by authorizedservice centers or dealers only.Battery LockThe battery lock is used to keep the battery pack secured. Usage details are described in the batterysection later in this manual.Battery PackThe battery pack is automatically charged when connected to an AC power source and maintains power tothe Notebook PC when AC power is not connected. This allows use when moving temporarily betweenlocations. Battery time varies by usage and by the specifications for this Notebook PC. The battery packcannot be disassembled and must be replaced as a single unit through an authorized vendor.Memory CompartmentThe memory compartment contains an expansion slot for additional memory. Memory installation orupgrades must be done by an authorized retailer or else warranty will be void.Central Processor (CPU)Some Notebook PC models feature a socketed-processor design to allow upgrading to faster processorsin the future. Some models feature a ULV design for compactness and may not be upgraded. Visit anauthorized service center or retailer for information on upgrades.WARNING! End-user removal of the CPU or hard disk drive will void the warranty.Emergency Shutdown ButtonIn case your operating system cannot properly turn OFF or restart, the shutdown button can be pressedwith a straightened paper clip to shutdown the Notebook PC.Audio Speaker (Sub-Woofer)The built-in sub-woofer speaker allows you to enjoy amazing bass (low frequency) sounds in yourmultimedia applications.TV-Tuner Card CompartmentThis Notebook PC features a TV-Tuner card for viewing television programs on this Notebook PC.
162 Knowing the PartsLeft SideRefer to the diagram below to identify the components on this side of the Notebook PC.Power (DC) InputThe supplied power adapter converts AC power to DC power for use with this jack. Power suppliedthrough this jack supplies power to the Notebook PC and charges the internal battery pack. To preventdamage to the Notebook PC and battery pack, always use the supplied power adapter.Modem PortThe RJ-11 modem port with two pins is smaller than the RJ-45 LAN port and supports a standardtelephone cable. The internal modem supports up to 56K V.90 transfers. The built-in connector allowsconvenient use without additional adapters.IMPORTANT! The built-in modem does not support the voltage used in digital phonesystems. Do not connect the modem port to a digital phone system or else damagewill occur to the Notebook PC.LAN PortThe RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standardEthernet cable for connection to a local network. The built-in connector allows convenient use withoutadditional adapters.Display (Monitor) OutputThe 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or pro-jector to allow viewing on a larger external display.USBPortsTV-OutPortPowerInputModemPortLANPort Infrared PortPC CardSlot1394PortFlash MemorySlotDisplayOutputAir VentsTV-SignalInput PC CardEjectAV/S-VideoInputTV-Signal InputThe TV-Signal input allows for input from subscription tele-vision services using a standard coaxial cable. The providedadapter is necessary to change the size of the plug to fit the slim Notebook PC.Digital/AnalogDV
17Knowing the Parts 2TV-Out PortThe TV-Out port is an S-Video connector that allows routing the Notebook PC’s display to a televisionor video projection device. You can choose between simultaneouly or single display. Use an S-Videocable (not provided) for high quality displays or use the provided RCA to S-Video adapter for standardvideo devices. This port supports both NTSC and PAL formats.2.0USB Port (2.0/1.1)The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointingdevices, video cameras, modems, hard disk drives, printers, monitors, and scanners connected in aseries up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to runsimultaneously on a single computer, with peripherals such as USB keyboards and some newer moni-tors acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that peripher-als can be connected or disconnected without restarting the computer.Flash Memory SlotNormally a PCMCIA or USB memory card reader must be purchased separately in order to use memorycards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PChas a built-in memory card reader that can read many flash memory cards as specified later in thismanual. The built-in memory card reader is not only convenient, but also faster than most other formsof memory card readers because it utilizes the high-bandwidth PCI bus.1394 PortIEEE1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilitieslike USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 unitson the same bus. IEEE1394 is also used in high-end digital equipment and should be marked “DV” forDigital Video port.PC Card SlotOne PCMCIA 2.1 compliant PC Card socket is available to support one type I/II PC card. The socketsupports 32-bit CardBus. This allows accommodation of Notebook PC expansion options such as memorycards, ISDN, SCSI, Smart Cards, and wireless network adapters.Audio Video Input (AV Input)The audio video input is featured on selected models and provide a way of inputtingaudio and video signals through RCA jacks or S-Video (requires the 1/8” to RCA adapterincluded with selected models). This function only works when purchased with the TVtuner hardware and software package.AV-INInfrared Port (IrDA)The infrared (IrDA) communication port allows convenient wireless data communication with infra-red-equipped devices or computers. This allows easy wireless synchronization with PDAs or mobilephones and even wireless printing to printers. If your office supports IrDA networking, you can havewireless connection to a network anywhere provided there is a direct line of sight to an IrDA node.Small offices can use IrDA technology to share a printer between several closely placed Notebook PCsand even send files to each other without a network.
182 Knowing the PartsRight SideRefer to the diagram below to identify the components on this side of the Notebook PC.Cooling Fanand Air VentsUSBPortKensington®Lock PortElectronicEjectOptical Drive(varies by model) EmergencyEjectElectronic Eject, Emergency Eject (Optical Drive)The optical drive eject has an electronic eject button for opening the tray. You can also eject the opticaldrive tray through any software player or by right clicking the optical drive in Windows™ “My Com-puter.” The emergency eject is used to eject the optical drive tray in case the electronic eject does notwork. Do not use the emergency eject in place of the electronic eject. The activity LED (not availableon some models) lights in proportion to the data transferred between the Notebook PC and optical disc.Optical DriveThe Notebook PC comes in various models with different optical drives. The Notebook PC’s opticaldrive may support compact discs (CD) and/or digital video discs (DVD) and may have recordable (R)or re-writable (RW) capabilities. See the marketing specifications for details on each model.Kensington® Lock PortThe Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Note-book PC security products. These security products usually include a metal cable and lock that preventthe Notebook PC to be removed from a fixed object. Some security products may also include a motiondetector to sound an alarm when moved.2.0USB Port (2.0/1.1)The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointingdevices, video cameras, modems, hard disk drives, printers, monitors, and scanners connected in aseries up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to runsimultaneously on a single computer, with peripherals such as USB keyboards and some newer moni-tors acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that peripher-als can be connected or disconnected without restarting the computer.
19Knowing the Parts 2Front SideRefer to the diagram below to identify the components on the front side of the Notebook PC.Microphone Input Jack (Mic In)The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signalsfrom audio devices. Using this jack automatically disables the built-in microphone. Use this feature forvideo conferencing, voice narrations, or simple audio recordings.Audio Input Jack (Audio In)The stereo input jack (1/8 inch) can be used to connect a stereo audio source to the Notebook PC. Thisfeature is used mainly to add audio to multimedia applications.Headphone Output Jack (Phone Output)The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to ampli-fied speakers or headphones. Using this jack automatically disables the built-in speakers.SPDIF Output Jack (SPDIF Output)This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant devices for digitalaudio output. Use this feature to turn the Notebook PC into a hi-fi home entertainment system.ComboStereo SpeakersThe built-in stereo speaker system allows you to hear audio without additional attachments. The multi-media sound system features an integrated digital audio controller that produces rich, vibrant sound(results improved with external stereo headphones or speakers). Audio features are software controlled.MicInputDisplay opening tabStereo Speaker Stereo SpeakerCIRPortPhoneOutput AudioInputCIR Port (Consumer Infrared)The consumer infrared (IrDA) communication port allows convenient software control by way of a“wireless” remote controller. This allows easy navigation in multimedia applications from a distance.
202 Knowing the Parts
213. Getting StartedUsing AC PowerUsing Battery PowerPowering ON the Notebook PCChecking Battery PowerRestarting or RebootingPowering OFF the Notebook PCSpecial Keyboard FunctionsInstant Keys and Status Indicators
223 Getting StartedDV321NOTE: This Notebook PC may come witheither a two or three-prong plug depend-ing on territory. If a three-prong plug is pro-vided, you must use a grounded AC outletor use a properly grounded adapter to en-sure safe operation of the Notebook PC.With the AC power cord connected to the AC-DC converter, connect the AC power cord to an AC outlet(preferably with surge-protection) and then connect the DC plug to the Notebook PC. Connecting theAC-DC adapter to the AC outlet first allows you to test the AC outlet’s power and the AC-DC converteritself for compatibility problems before connecting the DC power to the Notebook PC. The greenpower LED on the adapter lights up if the power is within accepted ranges.TIP: You can buy travel kits for the Notebook PC that includes power and modemadapters for almost every country.IMPORTANT! Damage may occur if you use a different adapter to power the Note-book PC or use the Notebook PC’s adapter to power other electrical devices. If thereis smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek ser-vicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage bothyour battery pack(s) and the Notebook PC with a faulty AC-DC adapter.Power SystemUsing AC PowerThe Notebook PC power is comprised of two parts, the power adapterand the battery power system. The power adapter converts AC powerfrom a wall outlet to the DC power required by the Notebook PC.Your Notebook PC comes with a universal AC-DC adapter. Thatmeans that you may connect the power cord to any 100V-120V aswell as 220V-240V outlets without setting switches or using powerconverters. Different countries may require that an adapter be used to connect the provided US-stan-dard AC power cord to a different standard. Most hotels will provide universal outlets to support differ-ent power cords as well as voltages. It is always best to ask an experienced traveler about AC outletvoltages when bringing power adapters to another country.
23Getting Started 3To install the battery pack:1. Insert the battery pack as shown.2. Slide the battery lock to the lock position.To remove the battery pack:1. Slide the battery lock to the unlock position.2. Slide the spring lock to unlock and hold.IMPORTANT! Never attempt to remove the battery pack while the Notebook PC isturned ON, as this may result in the loss of working data.IMPORTANT! Only use battery packs and power adapters supplied with this Note-book PC or specifically approved by the manufacturer or retailer for use with thismodel or else damage may occur to the Notebook PC.12Using Battery PowerThe Notebook PC is designed to work with a removable battery pack. The battery pack consists of a setof battery cells housed together. A fully charged pack will provide several hours of battery life, whichcan be further extended by using power management features through the BIOS setup. Additionalbattery packs are optional and can be purchased separately through a Notebook PC retailer.Installing and Removing the Battery PackYour Notebook PC may or may not have its battery pack installed. If your Notebook PC does not haveits battery pack installed, use the following procedures to install the battery pack.Charging the Battery PackBefore you use your Notebook PC on the road, you will have to charge the battery pack. The batterypack begins to charge as soon as the Notebook PC is connected to external power using the poweradapter. Fully charge the battery pack before using it for the first time. A new battery pack must com-pletely charge before the Notebook PC is disconnected from external power. It takes a few hours tofully charge the battery when the Notebook PC is turned OFF and may take twice the time when theNotebook PC is turned ON. The battery charge light turns OFF when the battery pack is charged.123Spring Lock
243 Getting StartedThe Power-On Self Test (POST)When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnostictests called the Power-On Self Test (POST). The software that controls the POST is installed as apermanent part of the Notebook PC’s architecture. The POST includes a record of the Notebook PC’shardware configuration, which is used to make a diagnostic check of the system. This record is createdby using the BIOS Setup program. If the POST discovers a difference between the record and theexisting hardware, it will display a message on the screen prompting you to correct the conflict byrunning BIOS Setup. In most cases the record should be correct when you receive the Notebook PC.When the test is finished, you may get a message reporting “No operating system found” if the harddisk was not preloaded with an operating system. This indicates that the hard disk is correctly detectedand ready for the installation of a new operating system.The S.M.A.R.T. (Self Monitoring and Reporting Technology) checks the hard disk drive during POSTand gives a warning message if the hard disk drive requires servicing. If any critical hard disk drivewarning is given during bootup, backup your data immediately and run Windows disk checking program.To run Window’s disk checking program: (1) right-click any hard disk drive icon in “My Computer”, (2)choose Properties, (3) click the Tools tab, (4) click Check Now, (5) select a hard disk drive, (6) selectThorough to also check for physical damages, and (7) click Start. Third party disk utilities such as Symantec’sNorton Disk Doctor can also perform the same functions but with greater ease and more features.Powering ON the Notebook PCThe Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you mayadjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the systemconfiguration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splashscreen, standard boot information such as the BIOS version can be seen. Press [ESC] and you will bepresented with a boot menu with selections to boot from your available drives.NOTE: Before bootup, the display panel flashes when the power is turned ON. This ispart of the Notebook PC’s test routine and is not a problem with the display.IMPORTANT! If warnings are still given during bootup after running a software diskchecking utility, you should take your Notebook PC in for servicing. Continued usemay result in data loss.IMPORTANT! To protect the hard disk drive, always wait at least 5 seconds afterturning OFF your Notebook PC before turning it back ON.
25Getting Started 3Checking Battery PowerThe battery system implements the Smart Battery standard underthe Windows environment, which allows the battery to accuratelyreport the amount of charge percentage left in the battery. A fully-charged battery pack provides the Notebook PC a few hours ofworking power. But the actual figure varies depending on howyou use the power saving features, your general work habits, theCPU, system memory size, and the size of the display panel.To check the remaining battery power, move your cursor over thepower icon. The power icon is a “battery” when not using ACpower and a “plug” when using AC power. Double click on theicon for more information and settings.NOTE: If you ignore the lowbattery warning, eventuallythe Notebook PC enterssuspend mode (Windowsdefault uses STR).WARNING! Suspend-to-RAM (STR) does not last long when the battery power is de-pleted. Suspend-to-Disk (STD) is not the same as power OFF. STD requires a smallamount of power and will fail if no power is available due to complete battery deple-tion or no power supply (e.g. removing both the power adapter and battery pack).Battery CareThe Notebook PC’s battery pack, like all rechargeable batteries, has a limit on the number times it canbe recharged. Fully draining and charging the battery once a day every day will last over a year but howlong beyond that will depend on your environment temperature, humidity, and how your Notebook PCis used. It is ideal that the battery be used in a temperature range between 10˚C and 29˚C (50˚F and85˚F). You must also take into account that the Notebook PC’s internal temperature is higher than theoutside temperature. Any temperatures above or below this range will shorten the life of the battery.But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must bepurchased from an authorized dealer for this Notebook PC. Because batteries also have a shelf life, it isnot recommended to buy extras for storing.NOTE: The battery stops charging if the temperature is too high or the battery voltageis too high. BIOS provides a smart battery refreshing function.Move your mouse over the battery iconfor remaining power information.When the AC power is connected,charging status will be shown.Right-click the battery icon forsub-menus. Left-click the battery icon for powermanagement settings.
263 Getting StartedEmergency ShutdownIn case your operating system cannot properly turn OFF or restart, there are two additional ways toshutdown your Notebook PC:(1) Hold the power button over 4 seconds, or (2) Press the shutdown button .TIP: Use a straightened paper clip topress the shutdown button.IMPORTANT! Do not use emergency shutdown while data is being written; doing socan result in loss or destruction of your data.Restarting or RebootingAfter making changes to your operating system, youmay be prompted to restart the system. Some instal-lation processes will provide a dialog box to allowrestart. To restart the system manually, click WindowsStart button and select Shut Down and then chooseRestart.Powering OFFIn Windows XP, power OFF the Notebook PC by click-ing Windows Start button and select Shut Down andthen choose Turn off (or Shut down). For operatingsystems without proper power management (DOS,Windows NT), you must close all applications and exit operating systems and then power OFF by holdingthe power switch for 2 seconds (as opposed to 1 second to power ON). Holding the power switch for 2seconds is necessary in order to prevent accidental power-OFFs.IMPORTANT! To protect the hard drive, wait at least 5 seconds after turning OFF yourNotebook PC before turning it back ON.(Screens are different depending on security settings.)
27Getting Started 3Special Keyboard FunctionsColored Hot KeysThe following defines the colored hot keys on the Notebook PC’s keyboard. The colored commands can onlybe accessed by first pressing and holding the function key while pressing a key with a colored command.NOTE: The Hot Key locations on the function keys may vary depending on model butthe functions should remain the same. Follow the icons instead of the function keys.“Zz” Icon (F1): Places the Notebook PC in suspend mode (either Save-to-RAM or Save-to-Disk depending on sleep button setting in power management setup).Radio Tower Icon (F2): Wireless Models Only: Toggles the internal wireless LAN andBluetooth ON and OFF. When enabled, the wireless LAN LED will light. Windows soft-ware settings are necessary to use the wireless LAN or Bluetooth.Filled Sun Icon (F5):Decreases the display brightnessOpen Sun Icon (F6):Increases the display brightnessLCD Icon (F7): Toggles the display panel ON and OFF. This also stretches your screenarea (on certain models) to fill the entire display when using low resolution modes.LCD/Monitor Icons (F8): Toggles between the Notebook PC’s LCD display and an ex-ternal monitor in this series: Notebook PC LCD -> External Monitor -> Both. (This func-tion does not work in 256 Colors, select High Color in Display Property Settings.)IMPORTANT: Connect an external monitor before booting up the Notebook PC.Speaker Icons (F10):Toggles the speakers ON and OFF (only in Windows OS)Speaker Down Icon (F11):Decreases the speaker volume (only in Windows OS)Speaker Up Icon (F12):Increases the speaker volume (only in Windows OS)Num Lk (Ins): Toggles the numeric keypad (number lock) ON and OFF. Allows you touse a larger portion of the keyboard for number entering.Scr Lk (Del): Toggles the “Scroll Lock” ON and OFF. Allows you to use a larger portionof the keyboard for cell navigation.F10F7F1F12F8F5F11F6F2
283 Getting StartedKeyboard as a Numeric KeypadThe numeric keypad is embedded in the keyboard and con-sists of 15 keys that make number intensive input more con-venient. These dual-purpose keys are labeled in orange onthe key caps. Numeric assignments are located at the upperright hand corner of each key as shown in the figure. Whenthe numeric keypad is engaged by pressing , thenumber lock LED lights up. If an external keyboard is con-nected, pressing the on the external keyboard enables/disables the NumLock on both keyboards simultaneously.To disable the numeric keypad while keeping the keypad on an external keyboard activated, press the keys on the Notebook PC.Microsoft Windows™ KeysThere are two special Windows™ keys on the keyboard as described below.The key with the Windows™ Logo activates the Start menu located at the bottom left of theWindows™ desktop.The other key, that looks like a Windows™ menu with a small cursor, activates the propertiesmenu and is equivalent to pressing the right mouse button on a Windows™ object.Keyboard as CursorsThe keyboard can be used as cursors while Number Lock isON or OFF in order to increase navigation ease while en-tering numeric data in spreadsheets or similar applications.With Number Lock OFF, press and one of the cursorkeys shown below. For example [Fn][8] for up, [Fn][K] fordown, [Fn][U] for left, and [Fn][O] for right.With Number Lock ON, use [Shift] and one of the cursorkeys shown below. For example [Shift][8] for up, [Shift][K]for down, [Shift][U] for left, and [Shift][O] for right.NOTE: The arrow symbols are illustrated here for your reference. They are not labeledon the keyboard as shown here.
29Getting Started 3Instant Launch KeysInternet Launch KeyPressing this button will launch your Internet browser application while Windows is running.Pad-Lock KeyPressing this button will lock your touchpad when using an external mouse. Locking the touchpad willprevent you from accidentally moving the cursor while typing. To enable the touchpad, simply pressthis button again.Instant Launch Keys and Status IndicatorsPower4 Gear KeyThe Power4 Gear button toggles power savings between various power saving modes. The power sav-ing modes control many aspects of the Notebook PC to maximize performance versus battery timeduring various events.When you are using an AC power adapter, Power4 Gear will switch between three modes in the ACpower mode segment. When you remove the AC adapter, Power4 Gear will switch between sevenmodes in the battery (DC) mode segment. When you remove or apply the AC adapter, Power4 Gear willautomatically shift you up or down into the proper mode segment (AC or DC).Bluetooth Key (Optional)Pressing this button will enable or disable the Notebook PC’s built-in Bluetooth function. A statusindicator will light to show when Bluetooth is enabled.InstantON KeyPressing this button will turn ON the Notebook PC (if not already ON) and launch themultimedia player application to view DVDs, VCDs, videos, photos, or television pro-grams; or listen to music CDs or files. Media in the optical drive will be autodetectedand the appropriate controls will be shown in the multimedia player application.SuperPerformance HighPerformance GamePerformance DVD MoviePerformance Email/OfficePerformance PresentationPerformance Audio ListeningPerformance Battery-SavingPerformanceModeNamesTaskbarIconsAC AC/DC AC/DC DC DC DC DC DCPowerSegment
303 Getting StartedStatus Indicators (top–right)Drive Activity IndicatorIndicates that the Notebook PC is accessing one or more storage device(s) such asthe hard disk. The light flashes proportional to the access time.Number LockIndicates that number lock [Num Lk] is activated when lighted. Number lock al-lows some of the keyboard letters to act as numbers for easier numeric data input.Capital LockIndicates that capital lock [Caps Lock] is activated when lighted. Capital lock al-lows some of the keyboard letters to type using capitalized letters (e.g. A, B, C).When the capital lock light is OFF, the typed letters will be in the lower case form(e.g. a,b,c).Scroll LockIndicates that scroll lock [Scr Lk] is activated when lit. Scroll lock allows some ofthe keyboard letters to act as direction keys in order to allow easier navigationwhen only a part of the keyboard is required, such as for playing games.
31Getting Started 3Status Indicators (front)Power IndicatorThe green LED lights to indicate that the Notebook PC is turned ON and blink slowly when the Note-book PC is in the Suspend-to-RAM (Standby) mode. This LED is OFF when the Notebook PC is OFFor in the Suspend-to-Disk (Hibernation) mode.Wireless LAN Indicator (Optional)This indicator is only applicable on models with internal wireless LAN. When the internal wireless LANis enabled, this indicator will light. (Windows software settings are necessary to use the wireless LAN.)Email IndicatorFlashes when there is one or more new email(s) in your email program’s inbox. This function requiressoftware setup and may not be currently configured on your Notebook PC. This function is designedfor Microsoft email software only and may not work with email software from other companies.Bluetooth Indicator (Optional)The Bluetooth indicator will light to show that the Notebook PC’s built-in Bluetooth function is acti-vated through the Bluetooth instant key. (Windows software settings are necessary to use Bluetooth.)Battery Charge IndicatorThe battery charge indicator is an LED that shows the status of the battery’s power as follows:ON: When turned ON or OFF - The Notebook PC’s battery is charging when AC power is connected.Off: The Notebook PC’s battery is charged or completely drained.Blinking: When turned ON - battery power is less than 10% and the AC power is not connected.
323 Getting StartedChanges to full screen or windoweddisplayOpens/Closes Mobile TheaterapplicationExecutes selectionand zooms viewingJumps between two channels in TVmode / Opens menu in DVD modeGoes to previousIncreases or decreases audio volumeStarts or stops recordingChanges channel up or downChanges arrow keys to # keys in TVmodeBattery compartment(3V CR1225 button type)Goes to nextStops playingPlays audio or videoThis side inserts first when storing in theNotebook PC Card slotMutes audioArrow keys: Changes selected buttonAudio/Video Remote Controller (on selected models)A credit card remote controller is included on selected models to control the Notebook PC’s multimediafunctions. The multimedia software included in selected models must be installed before the remotecontroller can be used to control multimedia features. An optional full-sized remote controller (shownin the accessories section at the end of this User’s Manual) may be purchased in selected territories.The credit card remote controller canbe stored in the Notebook PC’s PCcard slot when not in use.DV
334. Using the Notebook PCOperating SystemPointing DeviceStorage Devices PC Card (PCMCIA) Socket Optical Drive Flash Memory Card Reader Hard Disk DriveModem ConnectionNetwork ConnectionPower System AC Power System Battery Power System Power Management Modes
344 Using the Notebook PCOperating SystemThis Notebook PC may offer (depending on territory) its customers the choice of a pre-installed operatingsystem such as Microsoft Windows XP. The choices and languages will depend on the territory. Thelevels of hardware and software support may vary depending on the installed operating system. Thestability and compatibility of other operating systems cannot be guaranteed.Support SoftwareThis Notebook PC comes with a support CD that provides BIOS,drivers and applications to enable hardware features, extendfunctionality, help manage your Notebook PC, or add functionalitynot provided by the native operating system. If updates orreplacement of the support CD is necessary, contact your dealerfor web sites to download individual software drivers and utilities.The support CD contains all drivers, utilities and software for all popular operating systems includingthose that have been pre-installed. The support CD does not include the operating system itself. Thesupport CD is necessary even if your Notebook PC came pre-configured in order to provide additionalsoftware not included as part of the factory pre-install.A recovery CD is optional and includes an image of the original operating system installed on the harddrive at the factory. The recovery CD provides a comprehensive recovery solution that quickly restoresthe Notebook PC’s operating system to its original working state provided that your hard disk drive isin good working order. Contact your retailer if you require such a solution.Note: Some of the Notebook PC’s components and features may not work until thedevice drivers and utilities are installed.OS
35Using the Notebook PC 4IMPORTANT! Do not use any objects inplace of your finger to operate the touch-pad or else damage may occur to thetouchpad’s surface.Pointing DeviceThe Notebook PC’s integrated touchpad pointingdevice is fully compatible with all two/three-buttonand scrolling knob PS/2 mice. The touchpad ispressure sensitive and contains no moving parts;therefore, mechanical failures can be avoided. Adevice driver is still required for working with someapplication software.Using the TouchpadLight pressure with the tip of your finger is all thatis required to operate the touchpad. Because thetouchpad is electrostatic sensitive, objects cannotbe used in place of your fingers. The touchpad’sprimary function is to move the cursor around orselect items displayed on the screen with the use ofyour fingertip instead of a standard desktop mouse.The following illustrations demonstrate proper useof the touchpad.Moving The CursorPlace your finger in the center of the touchpad andslide in a direction to move the cursor.Slide fingerforwardSlidefinger leftSlide fingerbackwardSlide fingerrightCursorMovementRight ClickLeft Click
364 Using the Notebook PCDouble-clicking/Double-tapping - This is a common skill for launching a program directly from thecorresponding icon you select. Move the cursor over the icon you wish to execute, press the left buttonor tap the pad twice in rapid succession, and the system launches the corresponding program. If theinterval between the clicks or taps is too long, the operation will not be executed. You can set thedouble-click speed using the Windows Control Panel “Mouse.” The following 2 examples produce thesame results.(press the left button twice and release) (lightly but rapidly strike the touchpad twice)(press the left cursor button and release) (lightly but rapidly strike the touchpad)Clicking/Tapping - With the cursor over an item, press the left button or use your fingertip to touch thetouchpad lightly, keeping your finger on the touchpad until the item is selected. The selected item willchange color. The following 2 examples produce the same results.Clicking TappingDouble-Clicking Double-TappingTouchpad Usage Illustrations
37Using the Notebook PC 4Dragging - Dragging means to pick up an item and place it anywhere on the screen you wish. You canmove the cursor over the item you select, and while keeping the left button depressed, moving thecursor to the desired location, then release the button. Or, you can simply double-tap on the item andhold while dragging the item with your fingertip. The following illustrations produce the same results.(hold left button and slide finger on touchpad) (lightly strike the touchpad twice, sliding fingeron touchpad during second strike)Dragging-Clicking Dragging-TappingNOTE: A software-controlled scrolling function is available after setting up the includedtouchpad utility to allow easy Windows or web navigation. Basic functions can be ad-justed at the Windows control panel to allow comfortable clicking and tapping.Caring for the TouchpadThe touchpad is pressure sensitive. If not properly cared for, it can be easily damaged. Take note of thefollowing precautions.• Make sure the touchpad does not come into contact with dirt, liquids or grease.• Do not touch the touchpad if your fingers are dirty or wet.• Do not rest heavy objects on the touchpad or the touchpad buttons.• Do not scratch the touchpad with your finger nails or any hard objects.NOTE: The touchpad responds to movement not to force. There is no need to tap thesurface too hard. Tapping too hard does not increase the responsiveness of the touch-pad. The touchpad responds best to light pressure.
384 Using the Notebook PCStorage DevicesStorage devices allow the Notebook PC to read or write documents, pictures, and other files to variousdata storage devices. This Notebook PC has the following storage devices:• PC card• Optical drive• Flash memory reader• Hard disk drivePC Card (PCMCIA) SocketThe Notebook PC supports PC Cards (or sometimes referred to as PCMCIA cards) to allow expansionlike PCI cards on desktop computers. This allows you to customize your Notebook PC to meet a widerange of application needs. The PCMCIA socket can interface with type I or type II PC cards. PC cardsare about the size of a few stacked credit cards and have a 68-pin connector at one end. The PC Cardstandard accommodates a number of function, communication, and data storage expansion options. PCcards come in memory/flash cards, fax/modems, networking adapters, SCSI adapters, MPEG I/II decodercards, Smart Cards, and even wireless modem or LAN cards. The Notebook PC supports PCMCIA 2.1,and 32-bit CardBus standards.The three different PC Card standards actually have different thicknesses. Type I cards are 3.3mm,Type II cards are 5mm, and Type III cards are 10.5mm thick. Type I and Type II cards can be used in asingle socket and Type III cards take up two sockets. Type III cards are only supported on NotebookPC’s with two PC card sockets.32-bit CardBus SupportCardBus support allows PC Cards and their hosts to use 32-bit bus mastering and operate at speeds ofup to 33MHz, transferring data in burst modes comparable with PCI’s 132MB/sec. By comparison, thestandard 16-bit PC Card bus can handle only 20MB/sec. Since the Notebook PC is equipped withCardBus broader and faster data pathway, it can handle bandwidth-hungry operations, such as 100MbpsFast Ethernet, Fast SCSI peripherals, and ISDN-based video conference. The CardBus peripherals supportplug and play.The CardBus socket is backward-compatible with 16-bit PC Cards serving at 5 volts operation whileCardBus operates at 3.3 volts to reduce power consumption.
39Using the Notebook PC 4Inserting a PC Card (PCMCIA)1. Press in the toggle eject button and release.The recessed spring loaded toggle button willextend when pushed in and released.2. Press the extended button again to eject the PCCard. Carefully pull the ejected PC card out ofthe socket.Removing a PC Card (PCMCIA)To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click thePC card icon on the Windows taskbar and stop the PC card you want to remove.DVDVDVAV-INDVBe sure the PC card islevel when inserting.DV3. Carefully connect any cables or adaptersneeded by the PC card. Usually connectors canonly be inserted in one orientation. Look for asticker, icon, or marking on one side of the con-nector representing the top side.1. If there is a PC Card socket protector, remove itusing the “Removing a PC Card” instructionsbelow.2. Insert the PC card with the connector side firstand label side up. Standard PC cards will beflush with the Notebook PC when fully inserted.
404 Using the Notebook PCOptical DriveInserting an optical disc1. While the Notebook PC’s power is ON,press the drive’s eject button and the traywill eject out partially.2. Gently pull on the drive’s front panel and slidethe tray completely out. Be careful not to touchthe CD drive lens and other mechanisms.Make sure there are no obstructions that mayget jammed under the drive’s tray.3. Hold the disc by the edge and face the disc’sprinted side up. Push down on both sides ofthe disc’s center until the disc snaps ontothe hub. The hub should be higher thanthe disc when correctly mounted.4. Slowly push the drive’s tray back in. The drivewill begin reading the table of contents (TOC)on the disc. When the drive stops, the disc isready to be used.NOTE: It is normal to hear as well as feel the CD spinning with great intensity in theCD drive while data is read.12
41Using the Notebook PC 4A CD drive letter should be present regardless of the presence of a CD disc in the drive. After the CD isproperly inserted, data can be accessed just like with hard disk drives; except that nothing can bewritten to or changed on the CD. Using the proper software, a CD-RW drive or DVD+CD-RW drivecan allow CD-RW discs to be used like a hard drive with writing, deleting, and editing capabilities.Vibration is normal for all high-speed optical drives due to unbalanced CDs or CD print. To decreasevibration, use the Notebook PC on an even surface and do not place labels on the CD.Listening to Audio CDThe optical drives can play audio CDs, but only the DVD-ROM drive can play DVD audio. Insert theaudio CD and Windows™ automatically opens an audio player and begins playing. Depending on theDVD audio disc and installed software, it may require that you open a DVD player to listen to DVDaudio. You can adjust the volume using hotkeys or Windows™ speaker icon on the taskbar.Using the Optical DriveOptical discs and equipment must be handled with care because of the precise mechanics involved.Keep in mind the important safety instructions from your CD suppliers. Unlike desktop optical drives,the Notebook PC uses a hub to hold the CD in place regardless of the angle. When inserting a CD, it isimportant that the CD be pressed onto the center hub or else the optical drive tray will scratch the CD.Optical Drive (Cont’)Removing an optical disc1. While the Notebook PC’s power is ON, pressthe drive’s eject button and the tray will ejectout partially.2. Gently pry the edge of the disc upwards at anangle to remove the disc from the hub.CD-R12WARNING! If the CD disc is not properly locked onto the center hub, the CD can bedamaged when the tray is closed. Always watch the CD closely while closing the trayslowly to prevent damage.
424 Using the Notebook PCHard Disk DriveHard disk drives have higher capacities and operate at much faster speedsthan floppy disk drives and optical drives. The Notebook PC comes witha replaceable 2.5” (6.35cm) wide and approximately .374” (.95cm) highIDE hard disk drive. Current IDE hard drives support S.M.A.R.T. (SelfMonitoring and Reporting Technology) to detect hard disk errors orfailures before they happen. Most Notebook PC models use PATA(Parallel ATA) hard drives, but selected models use SATA (Serial ATA) hard drives. When replacing orupgrading the hard drive, always visit an authorized service center or retailer for this Notebook PC.IMPORTANT! Poor handling of the Notebook PC may damage the hard disk drive.Handle the Notebook PC gently and keep it away from static electricity and strongvibrations or impact. The hard disk drive is the most delicate component and willlikely be the first or only component that is damaged if the Notebook PC is dropped.Flash Memory Card ReaderNormally a PCMCIA memory card reader must be purchased separately in order to use memory cardsfrom devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC hasa single built-in memory card reader that can read the following flash memory cards: Secure Digital(SD), Multi-Media Card (MMC), Memory Stick (MS), Memory Stick Select (MS Select), MemoryStick Duo (with MS adapter), Memory Stick Pro, and Memory Stick Pro Duo (with MS Pro adapter).Memory Sticks may be standard or with MagicGate technology. The built-in memory card reader is notonly convenient, but also faster than most other forms of memory card readers because it utilizes thehigh-bandwidth PCI bus.MS (Memory Stick)Duo/Pro/Duo Pro/MGMS (Memory Stick)SelectMS (Memory Stick)Magic Gate (MG)MS (Memory Stick)MS adapterMMC (Multimedia Card)SD (Secure Digital)Supported Memory TypesSD/MMCMS/MS ProDVIMPORTANT! Never remove cards while or immediately after reading, copying, for-matting, or deleting data on the card or else data loss may occur.
43Using the Notebook PC 4CAUTION: For electrical safety concerns, only use telephone cables rated 26AWG orhigher. (see Glossary for more information)NOTE: When you are connected to an online service, do not place the Notebook PC insuspend (or sleep mode) or else you will disconnect the modem connection.WARNING! Only use analog telephone outlets. The built-in modem does not supportthe voltage used in digital phone systems. Do not connect the RJ-11 to digital phonesystems found in many commercial buildings or else damage will occur!Modem ConnectionThe telephone wire used to connect the Notebook PC’s internalmodem should have either two or four wires (only two wires(telephone line #1) is used by the modem) and should have anRJ-11 connector on both ends. Connect one end to the modemport and the other end to an analog telephone wall socket (theones found in residential buildings). Once the driver is setup,the modem is ready to use.This is an example of the Notebook PC connectedto a telephone jack for use with the built-in modem.TelephoneWall JackTelephone cableswith RJ-11 connectorsTelephoneconnection isoptional
444 Using the Notebook PCNetwork Hub or SwitchNetwork cable withRJ-45 connectorsThis is an example of the Notebook PC connected to a NetworkHub or Switch for use with the built-in Ethernet controller.NOTE: The built-in modem and network cannot be installed later as an upgrade. Afterpurchase, modem and/or network can be installed as a PC card (PCMCIA).Network ConnectionConnect a network cable, with RJ-45 connectors on each end, to the modem/network port on the NotebookPC and the other end to a hub or switch. For 100 BASE-TX / 1000 BASE-T speeds, your network cablemust be category 5 or better (not category 3) with twisted-pair wiring. If you plan on running theinterface at 100/1000Mbps, it must be connected to a 100 BASE-TX / 1000 BASE-T hub (not a BASE-T4 hub). For 10Base-T, use category 3, 4, or 5 twisted-pair wiring. 10/100 Mbps Full-Duplex is supportedon this Notebook PC but requires connection to a network switching hub with “duplex” enabled. Thesoftware default is to use the fastest setting so no user-intervention is required.Twisted-Pair CableThe cable used to connect the Ethernet card to a host (generally aHub or Switch) is called a straight-through Twisted Pair Ethernet(TPE). The end connectors are called RJ-45 connectors, whichare not compatible with RJ-11 telephone connectors. If connectingtwo computers together without a hub in between, a crossoverLAN cable is required (Fast-Ethernet model). Gigabit modelssupport auto-crossover so a crossover LAN cable is optional.1000BASE-T (or Gigabit) is only supported on selected models.
45Using the Notebook PC 4Power Management ModesThe Notebook PC has a number of automatic or adjustable power saving features that you can use tomaximize battery life and lower Total Cost of Ownership (TCO). You can control some of these featuresthrough the Power menu in the BIOS Setup. ACPI power management settings are made through theoperating system. The power management features are designed to save as much electricity as possibleby putting components into a low power consumption mode as often as possible but also allow fulloperation on demand. These low power modes are referred to as “Stand by” (or Suspend-to-RAM) and“Hibernation” mode or Suspend-to-Disk (STD). The Standby mode is a simple function provided bythe operating system. When the Notebook PC is in either one of the power saving modes, the status willbe shown by the following: “Stand by”: Power LED Blinks and “Hibernation”: Power LED OFF.Full Power Mode & Maximum PerformanceThe Notebook PC operates in Full Power mode when the power management function is disabled byconfiguring Windows power management and SpeedStep. When the Notebook PC is operating in FullPower Mode, the Power LED remains ON. If you are conscious of both system performance and powerconsumption, select “Maximum Performance” instead of disabling all power management features.ACPIAdvanced Configuration and Power Management (ACPI) was developed by Intel, Microsoft, and Toshibaespecially for Windows and later to control power management and Plug and Play features. ACPI is thenew standard in power management for Notebook PCs.NOTE: APM was used in older operating systems like Windows NT4 and Windows 98.Because newer operating systems like Windows XP, Windows 2000, and Windows MEutilize ACPI, APM is no longer fully supported on this Notebook PC.Suspend ModeIn “Stand by” (STR) and “Hibernation” (STD), the CPU clock is stopped and most of the Notebook PCdevices are put in their lowest active state. The suspend mode is the lowest power state of the NotebookPC. The Notebook PC enters suspend mode when the system remains idle for a specified amount of timeor manually using the [Fn][F1] keys. The Power LED blinks slowly when the Notebook PC is in STRmode. In STD mode, the Notebook PC will appear to be powered OFF. Recover from STR by pressingany keyboard button (except Fn). Recover from STD by using the power switch (just like poweringON the Notebook PC).Power SavingsIn addition to reducing the CPU clock, this mode puts devices including the LCD backlight in theirlower active state. The Notebook PC enters “Stand by” mode (low priority) when the system remainsidle for a specified amount of time. The timeout can be set through Windows power management(higher priority). To resume system operation, press any key.
464 Using the Notebook PCPower State SummarySTATE ENTRY EVENT EXIT EVENT“Stand by” • “Stand by” through Windows Start button, • Any device• Timer as set though “Power Management” • Battery low in Windows Control Panel (higher priority)STR (“Stand by”) • Hotkey [Fn][F1] • Signal from modem port(Suspend-to-RAM) -- • Power button • Any keySTD (“Hibernate”) • Hotkey [Fn][F1] • Power button(Suspend-to-Disk) -- • Battery Extremely LowSoft OFF • Power button (can be defined as STR or STD) • Power button• “Shut down” through Windows Start buttonThermal Power ControlThere are three power control methods for controlling the Notebook PC’s thermal state. These powercontrol cannot be configured by the user and should be known in case the Notebook PC should enterthese states. The following temperatures represent the chassis temperature (not CPU).• The fan turns ON for active cooling when the temperature reaches the safe upper limit.• The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.• The system shut down for critical cooling when temperature exceeds the maximum safe upper limit.
47Using the Notebook PC 4Stand by and HibernatePower management settings can be found in the Windows control panel. The following shows thepower options properties in Windows. You can define “Stand By” or “Shut down” for closing thedisplay panel, pressing the power button, or activating sleep mode. “Stand by” and “Hibernate” savespower when your Notebook PC is not in use by turning OFF certain components. When you resumeyour work, your last status (such as a document scrolled down half way or email typed half way willreappear as if you never left. “Shut down” will close all applications and ask if you want to save yourwork if any are not saved.“Stand by” is the same as Suspend-to-RAM (STR). Thisfunction stores your current data and status in RAM whilemany components are turned OFF. Because RAM is volatile,it requires power to keep (refresh) the data. To operate: select“Start” | “Shut down”, and “Stand by”.“Hibernate” is the same as Suspend-to-Disk (STD) andstores your current data and status on the hard disk drive.By doing this, RAM does not have to be periodicallyrefreshed and power consumption is greatly reduced but notcompletely eliminated because certain wake-up componentslike LAN needs to remain powered. “Hibernate” saves morepower compared to “Stand by”. To operate: Enablehibernation in “Power Options” and select “Start” | “Shutdown”, and “Hibernate”.
484 Using the Notebook PCAudio/Video ConnectionsConnect the AV adapter as shown to use standard RCA inputs towatch and/or record video inputs from video players or videocamcorders. Connect a television cable in order to watch and/orrecord television shows or movies.DVAudio/VideoAdapterRCA Cable(not provided)Cable (analog/digital): Connect the coaxialcable from a paid television service (analog ordigital), roof-mounted aerial antenna, or indoor“rabbit ears”. Attach an NTSC to PAL adapter ifnecessary.Mobile (digital): Connect the provided digitalantenna in selected models to the Notebook PCusing the adapter. The digital antenna can onlyreceive digital signals broadcasted in selectedregions.Watching television programs1. Make sure there is an optional TV tuner in your Notebook PC.2. Make sure you can receive TV signals (test on a standard television).3. Analog: Attach the provided NTSC or PAL adapter.Digital: Currently NTSC. Attach the PAL adapter if necessary.4. Connect the coaxial cable to the correct adapter.5. Install and launch the television software in Windows operating system.DVUse the NTSC to PAL adapter if necessary.DV
49AppendixOptional AccessoriesOptional ConnectionsDVD-ROM Drive InformationInternal Modem CompliancyGlossarySafety StatementsNotebook PC Information
50A AppendixOptional AccessoriesThese items, if desired, come as optional items to complement your Notebook PC.USB Hub (Optional)Attaching an optional USB hub will increase your USB ports and allow you to quickly connect ordisconnect many USB peripherals through a single cable.USB 2.0 Slim Combo Drive (Optional)The slim combo drive features FlextraLink™ (anti-coaster technology) and FlextraSpeed™ (recordingtechnology) to help prevent writing unusable discs, minimizes CPU loading to allow operation of othersoftware while writing, and automatically adjust for optimal recording speed versus vibration to reducerotational noise.• Interface: USB 2.0• Data buffer: 2MB (write), 512KB (read)• Disc sizes: 12cm and 8cm• DVD (read): 8X max• CD (read): 24X max• CD-R (write): 24X, 20X, 16X, 8X, 4X• CD-RW (write): 12X, 10X, 8X, 4X, 2X• Dimensions: 16mm x 129mm x 142mm• Weight: 250g• (Specifications may change without notice.)
51Appendix AOptional Accessories (Cont.)These items, if desired, come as optional items to complement your Notebook PC.Wireless LAN Card or USB AdapterUSB Communication CableAttaching optional USB communication cablesbetween computers through the USB ports willallow basic file transfer capabilities between thecomputers whether they be Notebook PC’s,Desktop PC’s, or a combination of both.USB Flash Memory DiskA USB flash memory disk is an optional item thatcan replace the 1.44MB floppy disk and providestorage up to several hundred megabytes, highertransfer speeds, and greater durability. When usedin current operating systems, no drivers arenecessary.The ASUS USB Wireless LAN Adapter (WL-167g) is thumb-sized and creates a wirelessnetwork using the IEEE 802.11g/b wirelessstandards and connects to any computer usingUSB2.0 connectivity.802.11g 54MbpsThe ASUS WLAN PCCard (WL-107g) is awireless LAN adapter thatfits into a PCMCIA TypeII slot in a Notebook PCand creates a wirelessnetwork using the IEEE802.11g/b wirelessstandards.
52A AppendixWARNING! To prevent system failures,use (Safely Remove Hardware) on thetaskbar before disconnecting the USBfloppy disk drive. Eject the floppy diskbefore transporting the Notebook PC toprevent damage from shock.Optional Accessories (Cont.)These items, if desired, come as optional items to complement your Notebook PC.USB Floppy Disk DriveThe Notebook PC features an optional USB-interface disk drive that accepts a standard 1.44MB (or720KB) 3.5-inch floppy diskette. The eject button is on the top edge of the floppy disk drive for easyaccess, unlike desktop PCs with the eject button on the bottom of the floppy disk drive. Floppy accessactivity can be monitored through the LED on the front of the floppy disk drive.USB Keyboard and MouseAttaching an external USB keyboard will allow data entry to be more comfortable. Attaching an externalUSB mouse will allow Windows navigation to be more comfortable. Both the external USB keyboardand mouse will work simultaneously with the Notebook PC’s built-in keyboard and touchpad.
53Appendix AOptional Accessories (Cont.)These items, if desired, come as optional items to complement your Notebook PC.Large Wireless Remote ControllerMutes audio volumeScrolls rightON/OFF TV MUSICPICTURES VIDEODVD/MENUBACK SELECTPLAY/PAUSESTOP FWDREWFULL SCREENMUTEJUMPVOL CHOKRECORDChanges between full screen orwindowed displayOpens/Closes Mobile Theater applicationExecutes / accepts selectionJumps between two channels in TV modeGoes to previousStarts or stops recordingChanges channel up or downGoes to nextStops playingOpens music player applicationScrolls upOpens TV viewing applicationOpens picture viewer applicationOpens video viewer applicationScrolls leftIncreases or decreases audio volumeOpens DVD player application or opensmenu in DVD modeScrolls down(Reserved for next software version)Controller transmission activity LED(No function)(No function)Fast forwardFast rewindPlay or pause when playing(Reserved for next software version)Go back to previous pageNumeric entry keys
54A AppendixOptional ConnectionsThese items, if desired, may be purchased from third-parties.Monitor Out ConnectionAttaching an optional VGA/LCD monitor is justlike that of a standard desktop PC (someconfigurations may require additional displaydriver settings. You can view the Notebook PCdisplay panel while simultaneously allowing othersto view the external monitor. For large audiences,try you can connect a video projector to this port.External Audio ConnectionsThe Notebook PC provides easy access for connecting a stereo headphone or multichannel speakersystem, mono microphone, and a stereo audio source just like on many personal audio equipment.Multichannel speaker system(Connect to Headphone jack)
55Appendix AOptional Connections (Cont.)These items, if desired, may be purchased from third-parties.IEEE1394 Connection1394 is a high speed serial bus like SCSI but hassimple connections and hot-plugging capabilitieslike USB. Up to 63 devices such as hard disk drives,scanners, removable drives, and digital cameras/video cameras with an 1394 port can all beconnected (more 1394 devices can be connectedusing a 1394 hub). 1394 is also used in high-enddigital equipment and should be marked “DV” forDigital Video port.Securing Your Notebook PCFor system and hard disk drive security, see BIOSsetup “Security”. A third party lock such as the onesby Kensington® can be used to secure yourNotebook PC physically to an unmovable object.The cable wraps around an object and the “T”shaped end inserts into the Kensington® lock portas shown in this illustration and a key orcombination dial is used to secure the lock in place.Printer ConnectionOne or more USB printers can be simultaneouslyused on any USB port or USB hub.
56A AppendixGlossaryACPI (Advanced Configuration and Power Management Interface)Modern standard for reducing power usage in computers.APM (Advanced Power Management)Modern standard for reducing power usage in computers.AWG (American Wire Gauge)NOTE: This table is for general reference only and should not be used as a source ofthe American Wire Gauge standard as this table may not be current or complete.Gauge Diam Area R I@3A/mm2AWG (mm) (mm2) (ohm/km) (mA)33 0.18 0.026 676 750.19 0.028 605 8532 0.20 0.031 547 9330 0.25 0.049 351 14729 0.30 0.071 243 21227 0.35 0.096 178 28826 0.40 0.13 137 37825 0.45 0.16 108 477Gauge Diam Area R I@3A/mm2AWG (mm) (mm2) (ohm/km) (mA)24 0.50 0.20 87.5 5880.55 0.24 72.3 7150.60 0.28 60.7 85022 0.65 0.33 51.7 1.0 A0.70 0.39 44.6 1.16 A0.75 0.44 38.9 1.32 A20 0.80 0.50 34.1 1.51 A0.85 0.57 30.2 1.70 ABIOS (Basic Input/Output System)BIOS is a set of routines that affect how the computer transfers data between computer components,such as memory, disks, and the display adapter. The BIOS instructions are built into the computer’sread-only memory. BIOS parameters can be configured by the user through the BIOS Setup program.The BIOS can be updated using the provided utility to copy a new BIOS file into the EEPROM.Bit (Binary Digit)Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1.BootBoot means to start the computer operating system by loading it into system memory. When the manualinstructs you to “boot” your system (or computer), it means to turn ON your computer. “Reboot” meansto restart your computer. When using Windows 95 or later, selecting “Restart” from “Start | Shut Down...”will reboot your computer.Bus Master IDEPIO (Programmable I/O) IDE requires that the CPU be involved in IDE access and waiting for mechanicalevents. Bus master IDE transfers data to/from the memory without interrupting the CPU. Bus masterIDE driver and bus master IDE hard disk drives are required to support bus master IDE mode.
57Appendix AByte (Binary Term)One byte is a group of eight contiguous bits. A byte is used to represent a single alphanumeric character,punctuation mark, or other symbol.Clock ThrottlingChipset function which allows the processor’s clock to be stopped and started at a known duty cycle.Clock throttling is used for power savings, thermal management, and reducing processing speed.CPU (Central Processing Unit)The CPU, sometimes called “Processor,” actually functions as the “brain” of the computer. It interpretsand executes program commands and processes data stored in memory.Device DriverA device driver is a special set of instructions that allows the computer’s operating system to communicatewith devices such as VGA, audio, Ethernet, printer, or modem.DVDDVD is essentially a bigger, faster CD that can hold video as well as audio and computer data. Withthese capacities and access rates, DVD discs can provide you with dramatically-enhanced high-color,full-motion videos, better graphics, sharper pictures, and digital audio for a theater-like experience.DVD aims to encompass home entertainment, computers, and business information with a single digitalformat, eventually replacing audio CD, videotape, laserdisc, CD-ROM, and video game cartridges.HardwareHardware is a general term referring to the physical components of a computer system, includingperipherals such as printers, modems, and pointing devices.IDE (Integrated Drive Electronics)IDE devices integrate the drive control circuitry directly on the drive itself, eliminating the need for aseparate adapter card (in the case for SCSI devices). UltraDMA/66 or 100 IDE devices can achieve upto 33MB/Sec transfer.IEEE1394Also known as iLINK (Sony) or FireWire (Apple). IEEE1394 is a high speed serial bus like SCSI buthas simple connections and hot-plugging capabilities like USB. The interface IEEE1394 has a bandwidthof 400-1000 Mbits/sec and can handle up to 63 units on the same bus. It is very likely that IEEE1394,together with USB, will replace Parallel, IDE, SCSI, and EIDE ports. IEEE1394 is also used in high-end digital equipment and should be marked “DV” for Digital Video port.Infrared Port (IrDA)The infrared (IrDA) communication port allows convenient wireless data communication with infrared-equipped devices or computers. This allows easy wireless synchronization with PDAs or mobile phonesand even wireless printing to printers. If your office supports IrDA networking, you can have wirelessconnection to a network anywhere provided there is a direct line of sight to an IrDA node. Small officescan use IrDA technology to share a printer between several closely placed Notebook PCs and even sendfiles to each other without a network.
58A AppendixKensington® LocksKensington® locks (or compatible) allow the Notebook PC to be secured usually using a metal cableand lock that prevent the Notebook PC to be removed from a fixed object. Some security products mayalso include a motion detector to sound an alarm when moved.Laser ClassificationsAs lasers became more numerous and more widely used, the need to warn users of laser hazards becameapparent. To meet this need, laser classifications were established. Current classification levels vary fromoptically safe, requiring no controls (Class 1) to very hazardous, requiring strict controls (Class 4).CLASS 1: A Class 1 laser or laser system emits levels of optical energy that are eye-safe and conse-quently require no controls. An example of this class of laser system is the checkout scanning devicefound in most grocery stores or lasers used in optical drives.CLASS 2 & CLASS 3A: Class 2 and Class 3A lasers emit visible, continuous-wave (CW) opticalradiation levels slightly above the maximum permissible exposure (MPE) level. Although these laserscan cause eye damage, their brightness usually causes observers to look away or blink before eyedamage occurs. These lasers have strict administrative controls requiring placement of signs warningpersonnel not to stare directly into the beam. Class 3A lasers must not be viewed with optically-aideddevices.CLASS 3B: Class 3B lasers, and Class 3A lasers with outputs of 2.5mW, are hazardous to personnelwho are within the beam path and look at the beam source directly or by specular reflection. Theselasers cannot produce hazardous diffuse reflections. Personnel working with these lasers should wearappropriate protective eyewear during any operation of the laser. Class 3B lasers have both adminis-trative and physical controls to protect personnel. Physical controls include limited access work areas.Administrative controls include special warning signs posted outside the entrances to the laser workspaces and lights outside the entrances that warn personnel when the lasers are in use.CLASS 4: Class 4 lasers are high-power lasers that will cause damage to unprotected eyes and skinthrough intra-beam viewing and specular or diffuse reflections. Consequently, no personnel should bein aroom where a Class 4 laser is operating without proper eye protection.PCI Bus (Peripheral Component Interconnect Local Bus)PCI bus is a specification that defines a 32-bit data bus interface. PCI is a standard widely used byexpansion card manufacturers.PC Cards (PCMCIA)PC cards are about the size of a few stacked credit cards and have a 68-pin connector at one end. ThePC Card standard accommodates a number of function, communication, and data storage expansionoptions. PC cards come in memory/flash cards, fax/modems, networking adapters, SCSI adapters, MPEGI/II decoder cards, and even wireless modem or LAN cards. The Notebook PC supports PCMCIA 2.1,and 32bit CardBus standards. The three different PC Card standards actually have different thicknesses.Type I cards are 3.3mm, Type II cards are 5mm, and Type III cards are 10.5mm thick. Type I and TypeII cards can be used in a single socket. Type III cards take up two sockets and must be used on NotebookPCs with two sockets.
59Appendix APOST (Power On Self Test)When you turn on the computer, it will first run through the POST, a series of software-controlleddiagnostic tests. The POST checks system memory, the motherboard circuitry, the display, the keyboard,the diskette drive, and other I/O devices.RAM (Random Access Memory)There are several different types of RAM such as DDR (Double Dynamic RAM), DRAM (DynamicRAM), EDO DRAM (Extended Data Output DRAM), SDRAM (Synchronous DRAM).ROM (Read Only Memory)ROM is nonvolatile memory used to store permanent programs (called firmware) used in certain computercomponents. Flash ROM (or EEPROM) can be reprogrammed with new programs (or BIOS).Suspend ModeIn “Stand by” (STR) and “Hibernation” (STD), the CPU clock is stopped and most of the Notebook PCdevices are put in their lowest active state. The suspend mode is the lowest power state of the NotebookPC. The Notebook PC enters suspend mode when the system remains idle for a specified amount of timeor manually using the [Fn][F1] keys. The Power LED blinks slowly when the Notebook PC is in STRmode. In STD mode, the Notebook PC will appear to be powered OFF. Recover from STR by pressingany keyboard button (except Fn). Recover from STD by using the power switch (just like poweringON the Notebook PC).System DiskA system disk contains the core file of an operating system and is used to boot up the operating system.Twisted-Pair CableThe cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straight-through Twisted Pair Ethernet (TPE). The end connectors are called RJ-45 connectors, which are notcompatible with RJ-11 telephone connectors. If connecting two computers together without a hub inbetween, a crossover twisted-pair is required.UltraDMA/66 or 100UltraDMA/66 or 100 are new specifications to improve IDE transfer rates. Unlike traditional PIOmode, which only uses the rising edge of IDE command signal to transfer data, UltraDMA/66 or 100uses both rising edge and falling edge.USB (Universal Serial Bus)A new 4-pin serial peripheral bus that allows plug and play computer peripherals such as keyboard,mouse, joystick, scanner, printer and modem/ISDN to be automatically configured when they are attachedphysically without having to install drivers or reboot. With USB, the traditional complex cables fromback panel of your PC can be eliminated.
60A AppendixDeclarations and Safety StatementsDVD-ROM Drive InformationThe Notebook PC comes with an optional DVD-ROM drive or a CD-ROM drive. In order to viewDVD titles, you must install your own DVD viewer software. Optional DVD viewer software may bepurchased with this Notebook PC. The DVD-ROM drive allows the use of both CD and DVD discs.Regional Playback InformationPlayback of DVD movie titles involves decoding MPEG2 video, digital AC3 audio and decryption of CSSprotected content. CSS (sometimes called copy guard) is the name given to the content protection schemeadopted by the motion picture industry to satisfy a need to protect against unlawful content duplication.Although the design rules imposed on CSS licensors are many, one rule that is most relevant is playbackrestrictions on regionalized content. In order to facilitate geographically staggered movie releases, DVDvideo titles are released for specific geographic regions as defined in “Region Definitions” below. Copyrightlaws require that all DVD movies be limited to a particular region (usually coded to the region at which it issold). While DVD movie content may be released for multiple regions, CSS design rules require that anysystem capable of playing CSS encrypted content must only be capable of playing one region.Region DefinitionsRegion 1Canada, US, US TerritoriesRegion 2Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran, Iraq, Ireland, Italy, Japan,Netherlands, Norway, Poland, Portugal, Saudi Arabia, Scotland, South Africa, Spain, Sweden,Switzerland, Syria, Turkey, UK, Greece, Former Yugoslav Republics, SlovakiaRegion 3Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand, VietnamRegion 4Australia, Caribbean (Except US Territories), Central America, New Zealand, Pacific Islands, SouthAmericaRegion 5CIS, India, Pakistan, Rest of Africa, Russia, North KoreaRegion 6ChinaNOTE: The region setting may be changed up to five times using the viewer software,then it can only play DVD movies for the last region setting. Changing the region codeafter that will require factory resetting which is not covered by warranty. If resetting isdesired, shipping and resetting costs will be at the expense of the user.
61Appendix AInternal Modem CompliancyThe Notebook PC with internal modem model complies with JATE (Japan), FCC (US, Canada, Korea,Taiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN).However due to differences between the individual PSTNs provided in different countries, the approvaldoes not, of itself, give an unconditional assurance of successful operation on every PSTN networktermination point. In the event of problems you should contact your equipment supplier in the firstinstance.OverviewOn 4th August 1998 the European Council Decision regarding the CTR 21 has been published in theOfficial Journal of the EC. The CTR 21 applies to all non voice terminal equipment with DTMF-dialling which is intended to be connected to the analogue PSTN (Public Switched Telephone Network).CTR 21 (Common Technical Regulation) for the attachment requirements for connection to the analoguepublic switched telephone networks of terminal equipment (excluding terminal equipment supportingthe voice telephony justified case service) in which network addressing, if provided, is by means ofdual tone multifrequency signalling.Network Compatibility DeclarationStatement to be made by the manufacturer to the Notified Body and the vendor: "This declaration willindicate the networks with which the equipment is designed to work and any notified networks withwhich the equipment may have inter-working difficulties"Network Compatibility DeclarationStatement to be made by the manufacturer to the user: "This declaration will indicate the networks withwhich the equipment is designed to work and any notified networks with which the equipment mayhave inter-working difficulties. The manufacturer shall also associate a statement to make it clear wherenetwork compatibility is dependent on physical and software switch settings. It will also advise the userto contact the vendor if it is desired to use the equipment on another network."Up to now the Notified Body of CETECOM issued several pan-European approvals using CTR 21. Theresults are Europe's first modems which do not require regulatory approvals in each individual Europeancountry.Non-Voice EquipmentAnswering machines and loud-speaking telephones can be eligible as well as modems, fax machines,auto-dialers and alarm systems. Equipment in which the end-to-end quality of speech is controlled byregulations (e.g. handset telephones and in some countries also cordless telephones) is excluded.
62A AppendixInternal Modem Compliancy (Cont.)This table shows the countries currently under the CTR21 standard.Country Applied More TestingAustria1Yes NoBelgium Yes NoCzech Republic No Not ApplicableDenmark1Yes YesFinland Yes NoFrance Yes NoGermany Yes NoGreece Yes NoHungary No Not ApplicableIceland Yes NoIreland Yes NoItaly Still Pending Still PendingIsrael No NoLichtenstein Yes NoLuxemburg Yes NoThe Netherlands1Yes YesNorway Yes NoPoland No Not ApplicablePortugal No Not ApplicableSpain No Not ApplicableSweden Yes NoSwitzerland Yes NoUnited Kingdom Yes NoThis information was copied from CETECOM and is supplied without liability. For updates to thistable, you may visit http://www.cetecom.de/technologies/ctr_21.html1 National requirements will apply only if the equipment may use pulse dialling (manufacturers maystate in the user guide that the equipment is only intended to support DTMF signalling, which wouldmake any additional testing superfluous).In The Netherlands additional testing is required for series connection and caller ID facilities.CAUTION: For electrical safety concerns, only use telephone cables rated 26AWG orhigher. (see Glossary for more information)
63Appendix AReprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of theFederal Register, National Archives and Records Administration, U.S. Government Printing Office.Canadian Department of Communications StatementThis digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatusset out in the Radio Interference Regulations of the Canadian Department of Communications.This Class B digital apparatus complies with Canadian ICES-003.(Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.)For use with AC Adaptor Model (Pour Utiliser Avec Modele): PA-1121-02 (120W), ADP-90FB (90W), ADP-65DB (65W)WARNING! The use of a shielded-type power cord is required in order to meet FCCemission limits and to prevent interference to the nearby radio and television recep-tion. It is essential that only the supplied power cord be used. Use only shieldedcables to connect I/O devices to this equipment. You are cautioned that changes ormodifications not expressly approved by the party responsible for compliance couldvoid your authority to operate the equipment.Federal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to the following two conditions:• This device may not cause harmful interference, and• This device must accept any interference received, including interference that may cause undes-ired operation.This equipment has been tested and found to comply with the limits for a class B digital device, pursuantto Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for help.
64A AppendixUL Safety NoticesRequired for UL 1459 covering telecommunications (telephone) equipment intended to be electricallyconnected to a telecommunication network that has an operating voltage to ground that does not exceed200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the NationalElectrical Code (NFPA 70).When using the Notebook PC modem, basic safety precautions should always be followed to reducethe risk of fire, electric shock, and injury to persons, including the following:•Do not use the Notebook PC near water, for example, near a bath tub, wash bowl, kitchen sink orlaundry tub, in a wet basement or near a swimming pool.•Do not use the Notebook PC during an electrical storm. There may be a remote risk of electricshock from lightning.•Do not use the Notebook PC in the vicinity of a gas leak.Required for UL 1642 covering primary (nonrechargeable) and secondary (rechargeable) lithium batteriesfor use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or alithium ion, and may consist of a single electrochemical cell or two or more cells connected in series,parallel, or both, that convert chemical energy into electrical energy by an irreversible or reversiblechemical reaction.•Do not dispose the Notebook PC battery pack in a fire, as they may explode. Check with localcodes for possible special disposal instructions to reduce the risk of injury to persons due to fire orexplosion.•Do not use power adapters or batteries from other devices to reduce the risk of injury to personsdue to fire or explosion. Use only UL certified power adapters or batteries supplied by the manu-facturer or authorized retailers.Power Safety RequirementProducts with electrical current ratings up to 6A and weighing more than 3Kg must use approved powercords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2.
65Appendix AOptical Drive Safety InformationLaser Safety InformationInternal or external optical drives sold with this Notebook PC contains a CLASS 1 LASER PRODUCT(LASER KLASSE 1 PRODUKT). Laser classifications can be found in the glossary at the end of thisuser’s manual.Service warning labelWARNING: Making adjustments or performing procedures other than those specifiedin the user’s manual may result in hazardous laser exposure. Do not attempt to disas-semble the optical drive. For your safety, have the optical drive serviced only by anauthorized service provider.CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAMOR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.CDRH RegulationsThe Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administrationimplemented regulations for laser products on August 2, 1976. These regulations apply to laser productsmanufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.WARNING: Use of controls or adjustments or performance of procedures other thanthose specified herein or in the laser product installation guide may result in hazard-ous radiation exposure.Macrovision Corporation Product NoticeThis product incorporates copyright protection technology that is protected by method claims of certainU.S.A. patents and other intellectual property rights owned by Macrovision Corporation and other rightsowners. Use of this copyright protection technology must be authorized by Macrovision Corporation, andis intended for home and other limited viewing uses only unless otherwise authorized by MacrovisionCorporation. Reverse engineering or disassembly is prohibited.
66A AppendixNordic Cautions (for Notebook PC with Lithium-Ion Battery)CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same orequivalent type recommended by the manufacturer. Dispose of used batteries according to themanufacturer’s instructions. (English)ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con ununa di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente. (Italian)VORSICHT! Explosionsgetahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselbenoder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angabendes Herstellers. (German)ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske medbatteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. (Danish)VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typsom rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. (Swedish)VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajansousittelemaan tyyppiin. Hävitä käytetty paristo valmistagan ohjeiden mukaisesti. (Finnish)ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplaceruniquement avec une batterie du mêre type ou d’un type équivalent recommandé par le constructeur.Mettre au rebut les batteries usagées conformément aux instructions du fabricant. (French)ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende typeanbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)(Japanese)
67Appendix ADanishDutchEnglishFinnishFrenchGermanGreekItalianPortugueseSpanishSwedishCTR 21 Approval (for Notebook PC with built-in Modem)
68A AppendixNotebook PC InformationThis page is provided for recording information concerning your Notebook PC for future reference orfor technical support. Keep this User’s Manual in a secured location if passwords are filled out.Owner’s Name:____________________________ Owner’s Telephone: ______________Manufacturer: _______________ Model: ___________ Serial Number: ______________Display Size:____________ Resolution: _____________ Memory Size: ______________Retailer: _________________Location: ___________ Purchase Date: ______________Hard Drive Manufacturer: ____________________________ Capacity: ______________Optical Drive Manufacturer: _____________________________ Type: ______________BIOS Version: __________________________________________Date: ______________Accessories: _____________________________________________________________Accessories: _____________________________________________________________SoftwareOperating System: __________Version: ___________ Serial Number: ______________Software: _________________Version: ___________ Serial Number: ______________Software: _________________Version: ___________ Serial Number: ______________SecuritySupervisor Name: _______________________ Supervisor Password: ______________User Name:___________________________________ User Password: ______________NetworkUser Name:______________ Password: _________________ Domain: ______________User Name:______________ Password: _________________ Domain: ______________
Copyright InformationNo part of this manual, including the products and software described in it, may be reproduced, transmitted, tran-scribed, stored in a retrieval system, or translated into any language in any form or by any means, except documen-tation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COM-PUTER INC. (“ASUS”).ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIREC-TORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSI-NESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HASBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERRORIN THIS MANUAL OR PRODUCT.Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless suchrepair, modification or alteration is authorized in writing by ASUS; or (2) the serial number of the product is defacedor missing.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights oftheir respective companies, and are used only for identification or explanation and to the owners’ benefit, withoutintent to infringe.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFOR-MATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULDNOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LI-ABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDINGTHE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.Limitation of LiabilityCircumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recoverdamages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages fromASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property andtangible personal property; or any other actual and direct damages resulted from omission or failure of performinglegal duties under this Warranty Statement, up to the listed contract price of each product.ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringe-ment under this Warranty Statement.This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and yourreseller are collectively responsible.UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTYCLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR(3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIALDAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RE-SELLER IS INFORMED OF THEIR POSSIBILITY.
Contact InformationASUSTeK COMPUTER INC.Company address: 15 Li-Te Road, Beitou, Taipei 11259General (tel): +886-2-2894-3447 Web site address: www.asus.com.twGeneral (fax): +886-2-2894-7798 General email: info@asus.com.twASUS COMPUTER INTERNATIONAL (America)Company address: 44370 Nobel Drive, Fremont, CA 94538, USAGeneral (fax): +1-510-608-4555 Web site address: usa.asus.comTechnical supportGeneral support (tel): +1-502-995-0883 Online support: http://vip.asus.com/eservice/techserv.aspxNotebook (tel): +1-510-739-3777 x5110 Support (fax): +1-502-933-8713ASUS COMPUTER GmbH (Germany & Austria)Company address: Harkort Str. 25, D-40880 Ratingen, GermanyGeneral (tel): +49-2102-95990 Web site address: www.asuscom.deGeneral (fax): +49-2102-959911 Online contact: www.asuscom.de/salesTechnical supportComponent support: +49-2102-95990 Online support: www.asuscom.de/supportNotebook support: +49-2102-959910 Support (fax): +49-2102-959911

Navigation menu