ASUSTeK Computer GALAXY3 PDA Phone User Manual zx1 users manual 2

ASUSTeK Computer Inc PDA Phone zx1 users manual 2

zx1 users manual 2

111Conguring wireless networksTo congure a wireless network: 1. To launch the Wi-Fi settings page, you can either: • Tap > Settings > Connections tab > Wi-Fi. • Tap from the status bar and then tap Settings > Wi-Fi. 2. On the Congure Wireless Networks screen, tap an available wireless network, then make the necessary changes. If the wireless network you want to connect to is not on the list, tap Add New.... Refer to the succeeding sections for details on how to add new wireless networks. Tap the Network Adapters tab and select an adapter. Tap an adapter to set if necessary. 3. Tap when done.
112Adding a wireless networkIf the device fails to automatically detect the wireless network you want to connect to, you can manually add a network. Ask for the wireless network settings from your network administrator.To add a wireless network: 1. To launch the Wi-Fi settings page, you can either: • Tap > Settings > Connections tab > Wi-Fi. • Tap from the status bar, then tap Settings > Wi-Fi. Then tap Add New... from the Wireless tab. 2. Enter a name for the network and select an item from the Connects to: drop-down menu. Then tap Next. 3. Set authentication, data encryption, and network key. Ask your network administrator for these information. Then tap Next.NOTE: Obtain the authentication, data encryption, and network key from your network administrator.4. If you need to change the EAP type, check the check box and then change the EAP type.5. Tap Finish when done.
113Using Wi-Fi ManagerThe Wi-Fi Manager shows connection status and information on a wireless network, and allows you to manually scan your area for available wireless networks.To open the Wi-Fi Manager: • Tap > Settings > Connections tab > Wi-Fi Manager. There are four tabs in the Wi-Fi Manager:Info This page shows the current connection status and link information.Setting This page allows you to dene settings for establishing a device-to-device wireless connection as well as power saving settings. We recommend to set the Power Save to Enable.IP Info This page shows the network information and provides a way to get the new IP address from the DHCP server. The Renew button enables you to request the DHCP server for a new IP address. This function would take several seconds to get the new IP address. The Ping button serves as the network’s diagnostic tool. It enables you to detect if your device is connected to the network.Site Survey This page shows the available wireless network. Tap Re-Scan to search for available wireless networks. Each wireless network is preceded by an icon for easy identication. The network channel, RSSI, and SSID are also displayed in columns.
114Setting a GPRS connectionYour device allows you to connect via General Packet Radio Service (GPRS). GPRS is a wireless communication standard that runs at speeds of up to 144 kbps, compared to 9.6 kbps of the current Global System for Mobile Communication (GSM). It supports a wide range of bandwidth that allows sending and receiving small bursts of data, such as e-mail and web browsing. To set a GPRS connection in your device:1. From the Today screen, tap / on the status bar, then tap Settings > Connections. Or from the Settings screen, tap Connections tab > Connections.2. From the Connections screen, tap Add a new modem connection.3. Enter a unique name for the connection then select Cellular Line (GPRS) from the modem list.4. Enter the Access point name. Consult your network service provider for the access point.5. Enter your user name, password, and domain then tap Finish. Contact your network administrator for assistance.NOTES: • The network connection may vary with different locations and mobile service providers. Consult your mobile service provider for the applicable network connection in your area. • The charge of GPRS services and the GPRS connection settings might vary with different operators. Consult your service provider for suitable solution. • The GPRS and USB connections cannot be used at the same time.
115NOTE: When WLAN is used simultaneously with the GPRS, the GPRS will get signal priority. We recommend not to use WLAN and GPRS at the same time.If you have set a default GPRS connection, it automatically connects when you launch an application that connects to the Internet.1. Launch any application that connects to the Internet such as Internet Explorer. The device will automatically connect to your default GPRS connection. A pop-up callout appears to display the connection status.2. When connected, you can start browsing the Internet. If you are using Internet Explorer, the default site will be displayed.1. Tap > Settings > Connections tab > Connections.2. From the Connections screen, tap Manage existing connections.3. Tap and hold on an existing connection then from the pop-up menu tap Connect. Tap Delete if you want to delete the selected connection.4. When connected, tap to exit.Connecting GPRSTo connect GPRS:
116Disconnecting GPRSTo disconnect GPRS: • From Wireless Manager screen, tap .NOTES: • If your ActiveSync is set to sync with Exchange Server automatically, synchronization will occur after you connect again. • GPRS will automatically reconnect everytime you launch an application that requires GPRS connection (such as Internet Explorer or Windows Live Messenger).Using the GPRS ToolThe GPRS Tool allows you to conveniently select and connect to your GPRS service provider.To connect via GPRS Tool:1. Tap > Settings > Connections tab > Network Setting. You can also tap / on the status bar then tap Settings from the popup callout.2. From the Network Setting screen, select your GPRS provider from the list.NOTES: • Operators vary in different regions. • The GPRS and USB connections cannot be used at the same time.
117Setting the networkYour device enables you to congure your device’s network connection as well as set multiple networks in the order that you want to access them.Conguring the networkTo congure the network settings:1. Tap > Settings > Connections tab > Network Setting.2. Select the Country and Operator from the dropdown lists. If your mobile service operator is not on the list, tap the Auto Detect button.3. When done, tap .Setting your preferred networksYour device enables you to set multiple networks in the order that you want your device to access them. If your primary network is not accessible, your device will automatically try to access an available network in your network list.To set preferred network:1. From the phone pad, tap Menu > Options > Network tab.2. Tap Set Networks and follow the onscreen instructions.3. When you have set your preferred networks, tap to return to the Network tab. In the Network selection list, tap Automatic.
118GSM/3G NetworksGSM/3G Networks allows you to conveniently switch network type. Network options include Automatic, 3G, and GSM. The default setting is Automatic, which allows the device to search for the proper service automatically. To choose network type1. Tap > Settings > Connections tab > GSM/3G Networks.2. Select a proper network type, then tap . If you prefer to use the service your SIM card automatically detected, select Automatic. 3. When prompted, tap to restart your device and apply changes.NOTES: • Network type varies with different service providers. • Ensure that you choose the right network type for your SIM card.
119GPS featuresChapter 9• GPS Catcher• External GPS
120GPS CatcherThe GPS Catcher allows you to update the Global Positioning System (GPS) data in your device. The GPS data contains important information about the status of satellite, and the current date and time for determining the satellite position. Updating GPS dataTo update GPS data:1. Tap > Programs > GPS Catcher. 2. Then tap Update to start update.3. Tap when nished.NOTES: • To make a successful update, ensure that your device is connected to the Internet. • The expiration of GPS data is three days. You need to update it again when it is expired. • You can also set GPS Catcher to update automatically, refer to the Setting GPS Catcher section for details.Setting GPS CatcherTo set GPS Catcher:1. From the GPS Catcher screen, tap Menu > Setting.2. Set the options according to your preference. Tap Done when nished.
121External GPSYour device allows you to use an external GPS device to receive GPS data. NOTES: • Your Pocket PC support only Bluetooth-enabled external GPS devices. • Before using an external device, connect your external GPS device to your Pocket PC via Bluetooth. Refer to Using Bluetooth® section for details.To set an external GPS device:1. Tap > Settings > System tab > External GPS.2. From the Programs tab, select a program port.NOTE: By default, the port is set to GPD1. We recommend that you DO NOT change the default setting.3. From the Hardware tab, specify a hardware port and baud rate for your external GPS device to use. NOTE: By default, the hardware port is set to COM2, and the baud rate is set to 57600. Refer to the user guide of your external GPS device for details. 4. From the Access tab, select the Manage GPS automatically (recommended) box.IMPORTANT: If you clear this check box, some GPS related application in your device may not be able to obtain GPS data.
122
123Multimedia featuresChapter 10• Using the camera• Viewing pictures and videos• Using Streaming Player• EziMusic• EziPhoto • YouTube&Flickr
124Using the cameraThe built-in 3.0 megapixel camera allows you to take photos and record audio/video clips. Launching the cameraTo start using the camera, do either of the following: • Tap > Programs > Pictures & Videos > Camera icon. • Press the Camera button on the right side of your device.To exit the Camera, tap the exit icon on the camera screen.Available capture modesYour device camera can be set to two capture modes:• Camera mode - Camera mode allows you to take photos, and save them to your device or microSD. You can also congure the camera to match an environment, set picture size, select magnication, adjust the picture quality, apply effects, and modify other advanced settings.• Video mode - Video mode enables you to record audio/video clips. Like in camera mode, it also allows you to select the magnication, set the video size, apply some effects, select target storage, and modify advanced video settings. Supported formatsUsing the camera mode or video mode, the images or video clip captured are stored in the following formats:• Still image (Camera mode): - JPEG (.jpg)• Video (Video mode): - 3GP (.3gp), MPEG-4 (.mp4)
125Camera modeThe following describes the screen icons in Camera mode:Tap to launch menuCapture mode iconGPS mode iconPicture quality iconDefault storage iconScene mode iconTimer iconBurst mode iconEffects iconPicture sizeTap to zoom out Tap to zoom inTap to close camera Tap to preview Pictures and VideosNumber of available shotsCapture modes:Camera mode. Tap to switch to video modeNOTES: • By default, the preview screen is set to landscape. • After launching the camera, your device is set to camera mode by default. • In camera mode, the camera button function as shutter button.
126Camera options menuThe camera options menu allows you to change various camera and picture settings.To launch options menu:1. Tap Menu from the camera screen.2. From the shortcut menu, tap an icon to display contents. • Change Mode: Allows you to set capture mode into Camera or Video mode. • GPS Mode: Allows you to turn on or turn off GPS in Camera mode. • Scene: Allows you to select presets appropriate for a night scene or sports event. Select Auto to use best setting for any scene. • Picture Size: Allows you to set the frame size of the picture. • Picture Quality: Allows you to select picture quality: Normal, Fine, and Super Fine. By default, the picture quality is set to Fine. • Zoom: Allows you to change the maximum magnication allowed. • Self-Timer: Sets the delay of shutter release to 5 or 10 seconds after you have pressed the camera/shutter button. • Burst: Allows you to take 4 or 9 pictures in succession with one press of the camera/ shutter button. • Frame: Allows you to set a frame. NOTE: Ensure that you have set the screen resolution to 320 x 240 before setting the frame. • Effect: The Effect option allows you to apply some effects to the subject. Select from the following conguration options: Black-White, Negative, and Sepia. Set to Normal for no effect.
127 • Save to: Allows you to select the default storage for captured pictures. NOTE: Prepare a MicroSD card before setting default storage to Storage Card. • Advanced: This option allows you to set the following: - Filename prex format - Filename prex - File number - Date and time stamp - Shutter sound - Burst interval - Color adjustment - General setting - MMS mode
128Taking photosAfter launching the camera, your device is set to Camera mode by default. If set to Video mode, tap Menu > Change Mode > Camera Mode then tap Exit. You can also switch between camera mode and video mode by tapping the camera/video mode icon on the screen.To take photos:1. Aim device to your subject then half-press the camera button to auto-focus on the subject. While the camera button is half-pressed, the auto-focus frame appears on the center of the screen.2. Full-press the camera button. When the icon appears, ensure that the device is stable and not shaking.3. Tap Camera and then repeat steps 1 to 2 to take more photos.NOTE: The image is automatically saved to the default storage location and can be viewed using the Pictures & Videos application.
129Video modeThe following describes the screen icons in Video mode:Capture mode iconRemaining video recording time Default storage iconEffects iconVideo sizeTap to zoom out Tap to zoom inTap to launch Pictures & VideosCapture mode icons:Video mode Tap to switch to camera modeTap to launch video menuRecording indicator Green: Ready Red: RecordingTap to close camera
130Video options menuThe video options menu allows you to change various video and playback settings.To launch video options menu:1. Tap Menu from the video screen.2. From the shortcut menu, tap an icon to display contents. • Change Mode: Allows you to set capture mode into Camera or Video mode. • Zoom: Allows you to change the maximum magnication allowed. • Video Size: Allows you to set the frame size of video. • Save to: Allows you to select the default storage location for recorded videos. NOTE: Prepare a MicroSD card before setting default storage to Storage Card. • Effect: The Effect option allows you to apply some effects to the subject. Select from the following conguration options: Black-White, Negative, and Sepia. Set to Normal for no effect. • Advanced: This option allows you to set the following: - File extension - Filename prex format - Filename prex - File number - Enable or disable audio when recording - Color adjustment - General setting - MMS mode
131Recording videosSet the device to video capture mode to record videos. To set video mode:• Tap Menu > Change Mode > Video Mode then tap Exit.• Tap the video mode icon on the screen.To record video:1. Aim device to your subject then half-press the camera button to auto-focus on the subject. While the camera button is half-pressed, the auto-focus frame appears on the center of the screen.2. Full-press the camera button to begin recording. The record indicator turns from green to red while video is recording.3. Press the camera button again to stop recording.NOTES: • The video clip is automatically saved to the default storage location. • Use Windows Media Player Mobile to playback video clip in your device. • Use Apple® QuickTime™ player, if you wish to play video clips in your computer. You can download QuickTime™ installer from www.apple.com/quicktime.
132Viewing pictures and videosUse the Pictures & Videos Application to preview stored images and playback video clips.Viewing pictures and videosTo view pictures and videos:1. Tap > Programs > Pictures & Videos. 2. Tap the picture or video clip you want to see. • To view pictures or launch video clips stored in MicroSD card, tap the folder list (labeled My Pictures), and tap Storage Card. • To view pictures stored in My Pictures folder on your device, tap My Pictures then tap a picture thumbnail. • To playback video clips in My Pictures folder on your device, tap My Pictures then tap a video. Editing pictures and photosTo edit pictures and photos:1. Tap > Programs > Pictures & Videos. Tap a picture or a photo thumbnail to open.2. Tap Menu > Image Editor.3. Edit the image. Draw, add stamp, and type on the picture using the tools. You can also erase and undo editing with the eraser tool and the undo tool. Refer to the tool icons and their descriptions on the next page.
133Icons Description Icons DescriptionTap to hide the tool bar Tap to erase some parts in the pictureTap to select the color of your editing strokeTap to undo editingTap to select the size of the pencil strokeTap to save the imageTap to add some stamps in the pictureTap to exit editingTap to add textTool bar4. Tap to save the picture. Then tap Yes to conrm. NOTE: In this option, the original picture is replaced by the edited le. You can also tap in the Tool bar and choose Save as to save the edited picture as another le name.NOTES: • This image editor function can only be applied to the pictures or photos with 320 x 240 resolution. • The image bigger than 320 x 240 resolution will be zoomed into 320 x 240 resolution.
134Streaming PlayerStreaming Player allows you to play audio or video les streamed to your device from the Internet. Supported formats include 3gp, 3g2, mp4, and sdp. NOTE: Before using Streaming Player, ensure that you are connected to the Internet via Wi-Fi, or GPRS connection. Refer to the sections on Wi-Fi, or GPRS in this user guide for activating any of these connections on your device.Tap to play/stop a leTap to play the previous leTap to maximize the screenTap to browse the internetTap to open and connect to an rtsp:// URL websiteTap to put sound on mute modeTap to play the next leTap to increase the volumeTap to launch the Menu listTap to decrease the volumeNOTE: A Real Time Streaming Protocol (RTSP) website provides multimedia data streams such as audio or video clips.
135Playing a streaming leTo play a streaming le:1. Tap > Programs > Streaming Player, then tap Open.2. Select Connect with tracking history or manual input of URL.3. Key in the web address then tap Connect. NOTE: Streaming Player only recognizes an rstp:// URL web address.4. Tap to play a streaming le from your preferred rtsp website.NOTE: You may bookmark your favorite rtsp://URL website. Refer to the next section for more details.Connecting with bookmarksYour device enables you to store and play streaming les from your favorite rtsp websites.NOTE: Before you can connect to a favorite rtsp website, you must rst add the website to your Bookmark list.To create a bookmark:1. On the Streaming Player screen, tap Menu > Bookmark Manager.2. Tap New Folder, then enter the name for the folder. 3. Tap Save to save the folder name. You can add an rtsp://URL website to the folder you have created the next time you connect to the Internet.
136To bookmark an rtsp://URL web address:1. Tap > Programs > Streaming Player, then tap Open.2. Select Connect with tracking history or manual input of URL.3. Key in the rtsp://URL web address then tap Connect. 4. Tap to play a streaming le from your preferred rtsp website. While a streaming le is playing, tap Menu > Add to My Bookmark.5. Assign a specic name for the streaming le that you want to save.6. Select the folder in your Bookmark list where you want to save the le.To play a bookmarked streaming le:1. Tap > Programs > Streaming Player, then tap Open.2. Select Connect with Bookmark.3. Select a le from your Bookmark folders, then tap Connect.4. Tap to play a streaming le from your favorite rtsp website.
137EziMusicEziMusic enables you to enjoy music and manage music les easily. To launch EziMusic, do either of the following: • Tap > Programs > EziMusic. • Press the AnyTime Launcher key, then tap > EziMusic.The following describes the EziMusic prole on your device.Tap to play the next leTap to play the selected leTap to open the menu listTap to adjust the volumeTap to enter the LibraryTap to select the leTap to change shufe/repeat modesTap to enter the LibraryTap to play the previous leDisplays the time elapsed Displays the total playing timeDrag the slider to change the playing process
138EziPhotoEziPhoto enables you to view and manage your photos conveniently. To launch EziPhoto, do either of the following: • Tap > Programs > EziPhoto. • Press the AnyTime Launcher key, then tap > EziPhoto.The following describes the EziPhoto prole on your device.Tap to open the CalendarTap to view all photosTap to open the menu listTap to open AlbumsTap a photo to view in full- screen modeTap to switch among Album, Calendar, and All Photos view
139YouTube&FlickrYouTube&Flickr enables you to upload videos to the YouTube website and pictures to the Flickr website via MMS, and e-mail messages.IMPORTANT: • Ensure that you have registered the MMS service with your mobile service provider before uploading videos or pictures via MMS. • Set up an e-mail account on your device before uploading videos or pictures via e-mail messages. Refer to the Setting up accounts section in Chapter 5: Messaging for details.Using YouTubeYou are allowed to upload videos directly to the YouTube website from your device via MMS, and e-mail messages.IMPORTANT: Before using YouTube, register for a YouTube account and set up your Mobile Prole at the YouTube website at http://www.youtube.com. YouTube provides you with a special e-mail address ending with @mms.youtube.com. To upload video clips to YouTube:1. Tap > Programs > YouTube&Flickr > YouTube.2. Tap Menu > Space Setting3. In the Email for YouTube uploading area key in your e-mail address, then tap Done. 4. Select MMS or an e-mail account from the dropdown list. 5. Tap Add, then tap a video clip from the list.
140Using FlickrYou are allowed to upload photos directly to the Flickr website from your device via MMS, and e-mail messages.IMPORTANT: Before using Flickr, register a Flickr account at the Flickr website at http://www.ickr.com.To upload photos to Flickr:1. Tap > Programs > YouTube&Flickr > Flickr.2. Tap Menu > Space Setting3. In the Email for Flickr uploading area key in <your username> @photos.ickr.com, then tap Done. 4. Select MMS or an e-mail account from the dropdown list. 5. Tap Add, then tap a photo from the list. NOTE: Consult your mobile service provider for the size limit of an MMS message. You are allowed to upload several photos at a time within the limit.6. Key in a title, description, and tag for your picture. 7. Tap Send to upload the picture to the Flickr website.NOTE: Consult your mobile service provider for the size limit of an MMS message. You are allowed to upload several video clips at a time within the limit.5. Key in a title, and description for your video clip. 6. Tap Send to upload the video clip to YouTube website.
141Business featuresChapter 11• Ur Time• Remote Calendar• Meeting Time Planner• WorldCard Mobile• Remote Presenter
142Ur TimeUr Time allows you to set the time and alarm at your current location as well as set the time for up to four cities.Setting timeTo set time:1. Tap > Programs > Ur Time. 2. Tap Menu > Time. Set the local time at your current location.3. Tap when nished.Setting alarmTo set the alarm:1. Tap > Programs > Ur Time. 2. Tap Menu > Alarm, then tap New to add a new alarm, or select an existing alarm and tap Edit.3. Set alarm details. To activate anti-snooze feature, check the Snooze box and set snooze interval.4. Tap when nished. Setting the World CockTo set World Clock:1. Tap > Programs > Ur Time. 2. Tap Menu > World Clock. You can set the time for up to four cities.3. Tap . The World Clock appears on the Today screen.
143Remote CalendarRemote Calendar allows you to access your Google Calendar from your device. From your device, you can either view the calendar or synchronize events and agenda with your Google Calendar in bi-directional way. Download events from Google calendar, or upload events to Google Calendar with your device.IMPORTANT: • Obtain a Google account before you use this function. Visit www.google.com/calendar for details on account register. • Ensure that your device is connected to Internet via GPRS when using the Remote Calendar.Synchronizing your calendarDownloading events from Google CalendarTo download agenda or events form your Google Calendar:1. Tap > Programs > Remote Calendar2. Key in the Username and Password, then tap Sync to start synchronizing.3. When the calendar is synchronized successfully, a pop-up message appears. Tap Yes to open the calendar or tap No to exit.
144Uploading events to Google CalendarTo upload new events or modied events to your Google Calendar:1. Tap > Calendar.2. Select the event you want to upload to Google Calendar, then tap Menu > Upload to Google. To set your Remote Calendar:1. Tap > Programs > Remote Calendar > Option > Setting.2. Set your desired synchronization mode, then tap OK to apply changes or tap Cancel to quit.Setting Remote CalendarThe Remote Calendar allows you to set synchronization mode.Tap to select sync mode.Tap to select sync direction.Tap to select sync interval. This item is inactive when the sync mode is set to Manual.Tap to select priority when event conict happens.
145Meeting Time PlannerMeeting Time Planner allows you to nd a suitable time to have a video conference, telephone or net meeting with participants in different time zones. To use the Meeting Time Planner:1. Tap > Programs > Meeting Time Planner. 2. Select the date and the cities. A color-coded 24-hour timetable of the chosen cities appear, allowing you to identify the best time for the meeting. Dark blue is late night/early morning, light blue is off-peak hour, and white is peak daytime hour. You can also change the time interval shown by tapping Interval on the lower-right corner of the screen. 3. Select the time for your meeting and tap New Date.4. Fill in the meeting information and tap to add your date into the Calendar.NOTE: You can tap Interval > Summer Time to use daylight saving time.
146WorldCard MobileWorldCard Mobile is capable of automatically recognizing business cards and sorting recognized eld information by name, title, company, phone number, fax number, address, or other properties. You can also edit business card information for effective sorting and management.To use WorldCard Mobile1. Tap > Programs > WorldCard Mobile.2. Tap and then press the Camera button to capture the image of a business card. Tap WorldCard Mobile.3. Select a language and then tap Recognize to run automatic recognition.4. Edit the business card information if necessary.5. To save the card information, do any of the following: • Tap , then tap Yes to conrm. • Tap Export to export the selected information to the Contacts.Capture Button Exit AboutHelpSetting
147Remote Presenter From your device, Remote Presenter allows you to remotely control PowerPoint™ presentations running on your desktop or notebook. Operating over a Bluetooth wireless connection, it promotes convenience and freedom of movement during your presentation. It also enables you to review slide notes without affecting the audience’s view of the slide show.To use the Remote Presenter:1. Tap > Programs > Remote Presenter. IMPORTANT: Ensure that the Blootooth on you computer is enabled and set to be visible.2. Tap Next on your device. You device starts searching for other Bluetooth-enabled devices.3 From the list of Bluetooth devices found, select the name of computer containing your PowerPoint presentation then tap Next.4. Check your computer screen when your device prompts a message reminding you to check you computer.5. Click the prompted message on your computer screen to allow your device to access the ActiveSync service of your computer.IMPORTANT: • Before you start, make sure to install the Remote Presenter utility on your computer. You can nd the installation les in the bundled support CD. • Remote Presenter works with Bluetooth-enabled computers only. • The screen captures in the following setup are for reference only and the sequence may appear differently, depending on the previous Bluetooth conguration performed on your system.
1486. From your computer, key in the passcode then click OK. The passcode is used to secure your connection. NOTE: The Bluetooth passcode is only required if a paired relationship is not yet established between devices.7. Tap Yes from you device and key in the same passcode to allow your computer to connect to your device.8. Tap Done from the prompted message reminding you of a successful connection. 9. Tap from the prompted message reminding you to launch the Remote Presenter on your computer.10. Launch the Remote Presenter program on your computer. To do this, from your computer desktop, click Start > All Programs > ASUS > Remote Presenter.The following describes the Remote Presenter menu on your computer screen.PowerPoint .ppt le pathBluetooth COM port. * The port varies with different computers.Click to change pathClick to start or stopClick to exit
14910. From the Remote Presenter menu on your computer, click to establish a connection. When prompted with the Bluetooth Service Authorization message, click OK.12. From your device, tap Connect. Then tap from the reminder message.13. A list of PowerPoint (.ppt) les appears on your device when a successful connection is established. Repeat from step 1 if the connection failed.Tap to select slideSlide numberIndicates Bluetooth® signalPrevious slideTap to switch between Note and Control Panel viewTap to exitTimerTap to switch between Normal and Slide Show viewNext slideTap to display menu options14. Tap the name of the PowerPoint (.ppt) le to show then tap Select. Upon selection, Microsoft® PowerPoint is automatically launched on your computer with the selected le open.15. You can now remotely control the PowerPoint presentation on your computer using your device. The following describes the control panel on your device.
150
151ASUS Special featuresChapter 12• Gesture feature• ASUS status icon• ASUS Zip• Backup• Newstation
152Gesture featureThis feature detects your nger movements on the screen to trigger special effects such as scrolling, panning, zooming, and rotating. Enabling the Gesture featureTo enable the Gesture feature1. Tap > Settings > System tab > Gesture.2. Select the check box of Enable Gesture Function.3. Select the Enable Sound Effects if you want to play the sound when your nger gesture is detected.NOTE: The sounds are for some of the gestures only.4. Tap when nished.Using the GestureAction Gesture DescriptionScroll Scroll up/down: Slide your nger upward/downward on the screen.NOTE: To stop scrolling, touch the screen with your nger.View previous page/next page in Internet Explorer and EziPhoto:Slide your nger leftward/rightward on the screen.
153Action Gesture DescriptionPan Pan up/down: Slide your nger upward/downward on the screen and then stop at your destination.Pan left/right: Slide your nger leftward/rightward on the screen and then stop at your destination.Pan top-left/bottom-right: Slide your nger in a left-slanted upward/right-slanted bottom direction on the screen and then stop at your destination.Zoom Zoom in in Internet Explorer and EziPhoto: Slide your nger in a right-slanted upward direction on the screen.Zoom out in Internet Explorer and EziPhoto: Slide your nger in a left-slanted downward direction on the screen.
154ASUS status iconThe ASUS status icon allows you to easily check and see the current status of the following device components: USB, LCD Brightness, Battery power, Memory, and microSD card.To check the status of these components:1. Tap > Settings > System tab> ASUS Status. 2. Select the items you want to check and the show types. 3. Check the box of Show system status icon. Then the ASUS Status icon appears on the Today screen.4. Tap from the Today screen to check the system status.USB: Allows you to set the USB connection mode.Brightness: Tap to adjust the LCD brightness on battery power or external power.Battery: Displays the remaining battery power and allows you to set advanced power saving features,Program memory: Displays the total, currently used, and remaining program storage memory.Storage memory: Displays the total, used, and remaining storage memory. Storage card: Tap to display the contents of the Storage card installed (shows only when a microSD card is installed).Settings: Allows you to select the items to display in this ASUS Status pop-up menu.
155USB settingAllows you to set the USB connection mode.LCD BrightnessAdjusts the LCD brightness on battery power and external power.BatteryDisplays the battery power status. The Advanced settings allows you to set a time when to turnoff the device if not used.Program memoryDisplays the total, in use, and available program memory.MemoryDisplays the total, in use and free memory.Storage card memoryDisplays the total, in use, and available storage card memory.NOTE: This item shows only when a microSD card is installed.SettingsAllows you to select the items to display in the ASUS Settings popup menu.
156ASUS ZipASUS Zip allows you to compress les to save space of your memory card or device. To compress les:1. Tap > Programs > ASUS Zip. 2. Select the radio button before New compress le, then tap Next. 3. Select les or folders and tap Add button, then tap Next.4. Rename the le and select the location and compression mode. Check the Password box if you want to set password for the le. Tap Next.5. Tap Done to exit. Check the Exit and open folder box if you want to open the folder where the compressed les are stored.To add les to an existing compressed le:1. Tap > Programs > ASUS Zip. 2. Select the radio button before Add le to existing compressed le, then tap Next. 3. Select a compressed le, then tap Next.4. Select les or folders you want to add and tap Add button, then tap Next.5. Tap Done to exit. Check the Exit and open folder box if you want to open the folder where the compressed les are stored.
157To extract les from a compressed le:1. Tap > Programs > ASUS Zip. 2. Select the radio button before Extract le, then tap Next. 3. Select a compressed le, then tap Next.4. Select a folder to save the extracted les, then tap Next.5. Tap Done to exit. Check the Exit and open folder box if you want to open the folder where the compressed les are stored.BackupThe Backup function allows you to backup as well as restore your les and data to your device and storage card. Backing-up lesTo backup les: 1. Tap > Programs > Backup > Backup.2. Select the location and the items you want to backup. Then tap Next.3. Rename the le and select the storage location for the backup. Then tap Next.4. Enter four digits as your password to encrypt the backup le. Then tap Next.5. Tap Start to begin backup. Or tap Back to return to the last screen. NOTE: The system will turn off all processing applications when backing up les.6. When nished, tap Reset to reset the device.
158Setting BackupTo set Backup: 1. Tap > Programs > Backup. Then tap Option.2. Check the box if you want the device to automatically reset after backup. Then Tap when nished.Restoring lesTo restore les: 1. Tap > Programs > Backup > Restore.2. Select the location and the items you want to restore, then tap Next.3. Rename the le and select the storage location for the backup, then tap Next.4. Enter the password to decrypt the backup le, then tap Next.5. Select the items you want to restore from the backed up les, then tap Next.6. Tap Start to begin restore. Or tap Back to return to the last screen. NOTE: The system will turn off all processing applications when restoring les.7. When nished, tap Reset to reset the device.
159NewstationWith the Newstation in your device, you can conveniently browse news and blogs anywhere and anytime. NOTE: Ensure that your device is connected to Internet when using Newstation.Using Newstation To read RSS news:1. Tap > Programs > Newstation.2. Tap a category folder to open. 3. Tap a channel name to open.4. Browse your favorite subjects.To create a new category folder:1. Tap > Programs > Newstation.2. Tap Menu > New Category then edit the category name. To add a channel:1. Tap > Programs > Newstation, then tap a category folder to open.2. Tap Menu > New Channel. You can add a channel from either Internet or an existing le. • Input from URL Select the radio button of Input from URL and enter the URL address. Then tap Next. Select a category where you want to add the channel. Then tap Finish.
160 • Import from a le Select the radio button of Import from a le, then tap Next. Select a folder and choose a le from the list. Choose channels from the list, then tap Next. Select a category where you want to add the channel, then tap Finish.Using Newstation menusCategory MenuTo use the category menu:1. Tap > Programs > Newstation.2. Select a category folder. Then tap Menu. The menu list pops up. 3. Tap an option that you need.Channel MenuTo use the channel menu:1. Tap > Programs > Newstation.2. Tap a category folder, then select a channel and tap Menu. 3. Tap an option that you need.Subject MenuTo use the subject menu:1. Tap > Programs > Newstation.2. Tap a category folder. Then tap a channel to open. Select a subject and tap Menu. The menu list pops up. 3. Tap an option that you need.
161Other featuresChapter 13• Microsoft® Ofce Mobile• ClearVue PDF• My Secrets• Auto Cleaner• Restoring default factory settings• System information• Task Manager• Removing programs
162Microsoft® Ofce MobileYour device comes with preinstalled Microsoft® Ofce Mobile applications which enable you to create, view, and edit spreadsheets, presentations, note, and word les on your device. Use these applications like you would normally use the Ofce applications on your computer.To access these applications tap > Programs > Ofce Mobile. Select the appropriate application to use.ICON DESCRIPTIONExcel Mobile allows you to view, create, and edit an Excel spreadsheet.OneNote Mobile allows you to view, create, and edit an OneNote le.Powerpoint Mobile allows you to view a powerpoint presentation.Word Mobile allows you to view, create, and edit a word le.
163Excel® MobileExcel workbooks created on a computer can be opened and edited on your device. However, Excel Mobile does not fully support some features, such as formulas and cell comments. Unsupported features• Alignment: Horizontal, vertical, and wrap text attributes remain the same, but vertical text appears horizontal.• Borders: Appear as a single line.• Cell patterns: Patterns applied to cells are removed.• Fonts and font sizes: Fonts not supported by your device are mapped to the closest font available. The original font is listed on your device. When the workbook is opened again in Excel on your computer, the data are displayed in the original font.• Number formats: Numbers formatted using the Microsoft® Excel 97 conditional formatting feature are displayed in Number format.• Formulas and functions: Formulas containing references past row 16384 are replaced with #REF! Also, the following formulas are converted to values: • formulas containing functions not supported by Excel Mobile • formulas entered as an array or containing an array argument. For example, = SUM({1;2;3;4}) • formulas containing external link references or intersection range reference• Protection settings: If a password to open has been specied for a workbook, it can be opened in Excel Mobile but cannot be modied.• Zoom settings: These are not retained. Excel supports a per worksheet zoom setting, while the Excel Mobile zoom setting is applied to the whole workbook.
164• Worksheet names: In a cell in a worksheet, names that reference worksheets within the same workbook are displayed accurately. Names that refer to other workbooks, arrays such as ={1;2;3;4}, array formulas, or intersection ranges are removed from the name list. If a name is removed from the list, it is left in formulas and functions, causing those formulas to be resolved as “#NAME?” Tabs that are hidden in the workbook are not hidden in Excel Mobile.• AutoFilter settings: These are removed. However, you can use the AutoFilter command in Excel Mobile to perform similar functions. If you have an AutoFilter applied to a worksheet that causes rows to be hidden, the rows remain hidden when the le is opened in Excel Mobile. Use the Unhide command to display the hidden rows.• Chart formatting: All charts will be saved the way they are shown in Excel Mobile. Unsupported chart types are changed to one of these supported types: Column, Bar, Line, Pie, Scatter, and Area. Background colors, gridlines, data labels, trend lines, shadows, 3D effects, secondary axes, and logarithmic scales are turned off.• Worksheet features: The following features are not supported in Excel Mobile and are removed or modied when a workbook is opened on the device: hidden sheets are not hidden; VBA modules, macro sheets, and dialog sheets are removed and replaced with a placeholder sheet; text boxes, drawing objects, pictures, lists, conditional formats, and controls are removed; pivot table is converted to values.• Excel 2007 Binary (.xlsb) workbooks: Not supported.• File conversions: • . xls/.xlt les cannot be saved as .xlsx/.xltx les, and .xlsx/.xltx les cannot be saved as .xls/.xlt les • rights-managed and password-protected les can be saved only in their original format.• Mandatory default le conversions upon saving: .xlsm/.xltm to .xlsx/.xltx; and .pxl/.pxt to .xls/.xlt
165OneNote® MobileOneNote Mobile is a note-taking application. It allows you to capture information in multiple ways and organize it according to your needs. Besides text, you can also insert audio recording and pictures to your notes. Unsupported content types• Fonts: Does not support font changing.• Audio content: Only audio recorded with the built-in voice recorder is supported.• Content search: Content search is not supported. PowerPoint® MobilePowerpoint presentations created on a computer can be viewed but not edited on your device. All le content is preserved and will be displayed if the presentation is later transferred to a computer, regardless of whether the content is supported on the device.Unsupported content types• Fonts: Unsupported fonts will be mapped to the closest available font.• Audio/video content: Only embedded .wav les are supported.• Password protection: If a password to open has been specied, the presentation cannot be viewed. If a password to modify has been specied, the presentation can be viewed but not saved using PowerPoint Mobile.
166Word® MobileWord documents created on a computer can be opened and edited on your device. However, Word Mobile does not fully support some features, such as revision marks and password protection. Some data and formatting may be lost when you save the document on your device. Unsupported features• Backgrounds: These are not displayed or saved by Word Mobile.• Bi-directional text: While Word Mobile will open documents containing bi-directional text, the indentations and alignment may be displayed and saved incorrectly.• Document protection: Word documents can be protected from unauthorized changes by using Protect Document on the computer. Word Mobile does not support displaying les that have been protected in this manner. • Fonts and font sizes: Fonts not supported by your device are mapped to the closest font available. The original font is listed on your device. When a document that has been edited in Word Mobile is opened on the computer, text is displayed in the original font.• Footnotes, endnotes, headers, footers: These features are not displayed by Word Mobile, but they are retained when a document is edited and saved on the device. When a document is opened again on a computer, these features are displayed in their original form.• Lists: Indented lists are not displayed on the device in the same they are displayed on the computer. They are mapped to closest indentation level supported by Word Mobile. However, the list information is retained in the document, so when it is opened again on a computer, lists are displayed in their original form.• Metales: These are not retained by Word Mobile. Instead, a graphical representation of the object will be displayed.• Page breaks: Word Mobile does not display page breaks. However, all page breaks except a break placed at the end of a document are retained in the document. When a document is opened again on a computer, page breaks are displayed.
167• Page borders: Lined page borders are supported. However, artistic page borders are not. The graphics will be converted to lined borders.• Password-protected les: If a password to open has been specied for a document, it cannot be opened in Word Mobile. If a password to modify has been specied for a document, it can be opened in Word Mobile but cannot be modied.• Shapes and text-boxes: These are not displayed or saved by Word Mobile.• Smart tags: These are not displayed or saved by Word Mobile.• File conversions: Files with Ofce 2003 extensions (.doc, .dot) cannot be saved with Ofce 2007 extensions (.docx, .dotx), and vice versa. However, these le types can be saved as .rtf and .txt les.• Rights-managed and password-protected le conversions: These les can be saved only in their original format.Partially supported features• Picture bullets: While regular bullets are supported, picture bullets are not. The picture bullets are not displayed or saved by Word Mobile.• Revision marks: These are not retained. When a document with revision marks is opened in Word Mobile, the document will appear as though all revision marks have been accepted. When the document is saved, revision marks will be lost.• Table styles: Some or all of the formatting dened in the style will be lost when a document is saved by Word Mobile.• Underlined styles: Underline styles not supported by Word Mobile are mapped to one of the four supported styles: regular, dotted, wavy, or thick/bold/wide.• Legacy Pocket Word les: You can open *.psw les in Word Mobile. However, if you edit a le, you will need to save it in *.doc, *.rtf, *.txt, or *.dot format.
168ClearVue PDFClearVue PDF allows you to read documents in Portable Document Format (PDF).To launch the ClearVue PDF application: Tap > Programs > ClearVue PDF.To exit the ClearVue PDF application: Tap File > Exit.••TO DO THISOpen a PDF le Tap File > Open.... Tap a le to open. Close an open le Tap File > Close. Open a recently viewed leTap File > Recent Files. A list of recently viewed les appears. Tap the le you want to open.Zoom the content of an open leTap Zoom. Select the scale you want to use or tap Custom... to customize the scale.
169My SecretsMy Secrets is a secret archive to keep your classied documents, pictures, and video. The items placed in the My Secrets folder are encrypted for protection. A user-dened password is required to unlock the folder or change the settings.You are requested to set up My Secrets before using it.To set up My Secrets:1. Tap > Programs > My Secrets.2. Select Express Mode (Recommended) then tap Next.3. Enter a four-digit password and then enter it again to conrm.4. Tap Finish to exit. The My Secrets folder in My Documents becomes the encrypted folder. An icon appears on the Today screen. Tap to show the shortcut menu. You can change your password or cancel encryption by tapping My Secrets Setting on the shortcut menu as shown.Tap to lock/unlock the folder. Tap to access the Advanced Settings. Tap to access the Help center. Tap to view version info.
170Restoring default factory settingsThis option allows you to restore the device system to its default factory settings. To restore default settings:1. Tap > Settings > System tab > Default Settings.2. Enter ‘1234’ in the Password eld and tap OK to conrm that you want to restore to default settings.3. Tap Yes to start restoring.WARNING: This option will delete all les stored in this device. Backup your important data to your storage card or computer before restoring to the default settings. Auto Cleaner To free memory, you can use this function to conveniently close the running applications that you are not using.To set Auto Cleaner:1. Tap > Settings > System tab > Auto Cleaner.2. Select the check box to activate the Auto Cleaner function, then select either Short or Long press X to close the program.3. Tap Setting button to set the Exception and the Forced.4. Tap when nished.
171System informationThe System Information contains important device information including the current device settings and version.To launch the System Information:1. Tap > Settings > System tab > System Information.2. Tap the Device Info tab for device hardware information.3. Tap Version tab to display the ROM, Boot, Radio and Battery version.Task ManagerThe Task Manager allows you to monitor the currently running programs, memory and CPU occupancy. You can use this function to end these programs easily. You can also switch to any of the listed programs from the Task Manager screen.To launch Task Manager: Tap > Programs > Task Manager.To end a program: Select the program you want to end and tap End Task. To end all tasks, tap Menu > End All Tasks.To switch to a program: Select a program and press down the Navigation key, or tap Menu > Switch To.
172Removing programsTo free the storage memory of your device, you can remove the programs you installed. But for the programs preinstalled in your device, you are not allowed to remove them.To remove a program:1. Tap > Settings > System tab > Remove Programs.2. Select a program you want to remove, then tap Remove.3. A warning message pops up. Tap Yes to conrm.
173Appendices• Notices• Specic Absorption Rate (SAR)• ASUS contact information
174NoticesFederal Communications Commission (FCC) RegulationsThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation.This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
175Canadian Department of Communications StatementCountry Code selection feature to be disabled for products marketed to the US/CANADA Operation is subject to the following two conditions: 1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device.This Class [B] digital apparatus complies with Canadian ICES-003.Cet appareil numerique de la classe [B] est conforme a la norme NMB-003 du Canada.This Category II radiocommunication device complies with Industry Canada Standard RSS-310.Ce dispositif de radiocommunication de categorie II respecte la norme CNR-310 d’Industrie Canada.Replaceable batteriesIf an equipment is provided with a replaceable battery and if replacement by an incorrect type could result in an explosion (e.g. with some lithium batteries), the following applies: • if the battery is placed in an OPERATOR ACCESS AREA, there shall be a marking close to the battery or a statement in both the operating and the servicing instructions; • if the battery is placed elsewhere in the equipment, there shall be a marking close to the battery or a statement in the servicing instructions.The marking or statement shall include the following or similar text:CAUTION: • RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. • DISPOSE USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
176Operator access with a toolIf a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access.An acceptable marking for an electric shock hazard is (ISO 3864, No. 5036).Equipment for restricted access locationsFor equipment intended only for installation in a RESTRICTED ACCESS LOCATION, the installation instructions shall contain a statement to this effect.WARNING: The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.Specic Absorption Rate (SAR)Bodyworn operationFor bodyworn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched on.Exposure to radio wavesTHIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVESYour mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the
178ASUSAddress: 15 Li-Te Road, Peitou, Taipei, TaiwanTel: 886228943447; Fax: 886228907698DeclarationWe declare that the IMEI codes for this product, ASUS - LAMBORGHINI ZX1, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards.Should you have any questions or comments regarding this matter, please have our best attention.Sincerely yours, ASUSTeK COMPUTER INC.Tel: 886228943447Fax: 886228907698Email: http://vip.asus.com/eservice/techserv.aspx
179ASUS Contact informationASUSTeK COMPUTER INC. (AsiaPacic)Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259Website www.asus.com.twTechnical SupportTelephone +886228943447Support Fax +886228907698Software download support.asus.com*ASUS COMPUTER INTERNATIONAL (America)Address 44370 Nobel Drive, Fremont, CA 94538, USATelephone +15029550883Fax +15029338713Website usa.asus.comSoftware download support.asus.com*ASUS COMPUTER GmbH (Germany and Austria)Address Harkort Str. 21-23, D40880 Ratingen, GermanyTelephone +49210295990Fax +492102959911Online contact www.asus.com.de/salesTechnical SupportTelephone +49180595990 Fax +492102959911Online support www.asus.com.de/supportWebsite www.asus.com.de/news* Available on this site is an online Technical Inquiry Form that you can ll out to contact technical support.
180 Declaration of Conformity We, Manufacturer/Importer (full address) ASUS COMPUTER GmbH HARKORT STR. 25 40880 RATINGEN, BRD. GERMANY declare that the product( description of the apparatus, system, installation to which it refers) PDA Phone ZX1 is in conformity with(reference to the specification under which conformity is declared) in accordance with 2004/108/EC-EMC Directive and 1995/5 EC-R &TTE Directive EN 55022: 2006 EN 300328 Electromagnetic compatibility and Radio Limits and methods of measurement spectrum Matters (ERM); wideband of radio disturbance characteristics of transmission equipment operating in information technology equipment the 2.4GHz ISM band and using spread spectrum modulation techniques; Part 1: EN 55024:1998+A1:2001+A2:2003 technical characteristics and test conditions Information Technology Part2: Harmonized EN covering essential equipment-Immunity requirements under article 3.2 of the R&TTE characteristics-Limits and methods of measurement EN 300386 Electromagnetic compatibility and Radio EN 50360/ the limitation of exposure of spectrum Matters (ERM);Telecommunication EN 50361 the general public to electromagneticnetwork equipment; Electromagnetic fields (0 Hz to 300 GHz) International Compatibility (EMC) requirements Commission on Non-IonisingRadiation Protection (1998), Guidelines for EN 301489 Electromagnetic compatibility and Radio limiting exposure in time-varying electric, spectrum Matters (ERM); Electromagnetic magnetic, and electromagnetic fieldscompatibility(EMC) standard for radio equipment and services; Part 17: Specific EN 61000-3-2 :2000+A2:2005 conditions for wideband data and Disturbances in supply systems caused HIPERLAN equipment EN 61000-3-3:1995+A1:2001 Disturbances in supply systems caused EN301511 Global System for Mobile communications(GSM) EN 55013 Limits and methods of measurement Harmonized EN for mobile stations in the GSM 900 of radio disturbance characteristics ofAnd GSM 1800 bans covering essential requirements broadcast receivers and associatedof article 3.2 of article 3.2 of the R&TTE directive(1999/5EC) equipment EN 55020 Immunity from radio interference ofbroadcast receivers and associated EN 301908-1 Electromagnetic compatibility and Radio spectrum equipment EN 301908-2 Matters(ERM);Base Stations(BS),Repeaters and User Equipment(UE)for IMT-2000 Third-Generation EN 50081-2 Generic emission standard Part 2 cellular Networks;-Part1:Harmonized EN for IMT-2000, Industrial environmentIntroduction and common requirements, covering Essential requirements of article 3.2 of of the R&TTE Directive EN 50082-2 Generic immunity standard Part 2: Part2:Harmonized EN for IMT-2000,CDMA Direct Spread Industrial environment (UTRD FDD) (UE)covering essential requirements of article 3.2 of the R&TTE Directive. CE marking (EC conformity marking) The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 2006/95 EC EN 60065 Safety requirements for mains operated EN 60950-1 Safety for information technology equipment electronic and related apparatus for including electrical business equipment household and similar general use EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for electrical appliances uninterruptible power systems (UPS) Manufacturer/Importer(Stamp) Date : Apr. 11 , 2008

Navigation menu