ASM Assembly Systems and KG 03146441 RFID Read Module User Manual

ASM Assembly Systems GmbH & Co. KG RFID Read Module

User Manual

SIPLACE RFID Read ModuleUser Manual03/2017Edition
All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. Theremaining trademarks in this publication may be trademarks whose use by third parties for their own purposescould violate the rights of the owner.We have reviewed the contents of this publication to ensure consistency with the hardware and softwaredescribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, theinformation given in this publication is reviewed regularly and any necessary corrections are included insubsequent editions.Copyright © ASM Assembly Systems Technical data subject to changeASM Assembly Systems GmbH & Co. KG Item-no.: 00198325-01Rupert-Mayer-Strasse 4481379 MünchenGermanywww.asm-smt.com
SIPLACE RFID Read Module / User Manual 03/2017 Edition41IntroductionThis manual provides technical information on the SIPLACE RFID Read Module.1.1 History of ChangesChanges to the original manual are listed below:Version Date Author / Dept Description1.0 20-Mar-2017 Jason / R&D1.2 FCC CautionAny changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate this equipment. This device complies with Part 15 of theFCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may causeundesired operation.NOTICEThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.– Consult the dealer or an experienced radio/TV technician for help.
SIPLACE RFID Read Module / User Manual 03/2017 Edition52RFID Read Module2.1 DescriptionThe RFID Read Module is used in SIPLACE products for specific purpose. It has built-in regulatorcircuit and communicates to host controller via UART interface and Flexible Flat Cable.2.2 SpecificationModel No. 03146441-01Input Voltage 5Vdc ± 10%Dimension 60mm x 22mmOperating frequency 13.56MHzOscillator frequency 27.12MHzCommunication interface UARTUsed protocol ISO/IEC 15693Modulation ASK 100% According to ISO 15693Rated Input Power 5Vdc, 75mARFID Transceiver CR95HF (ST Microelectronics)Operating Temperature 0 – 50 °C

Navigation menu