ARESON Technology CL0030 2.4GHz Wireless Dongle User Manual

ARESON Technology Corp. 2.4GHz Wireless Dongle

User manual

User's GuideWireless Optical Virtual Touch MouseB8021MR + C75◎ Battery use reminders◎ Trouble ShootingFCC statementImportant Notes: Please follow the instructions contained in the manual. Do not try to disassemble or replace parts in the products. Do not put the product in water or on any wet surfaces. To avoid electrocution, please do not pick up the device when your hands are wet. Do not put the product near a heat source.1. Remove worn-out batteries from equipment immediately and dispose of them promptly2. Keep all batteries (used or new) out of the reach of children.3. Never dispose of batteries in fire, as they could explode.4. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture.5. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.6. Remove batteries from this device if the device is not going to be used for a long time.7. If the performance of the batteries decreases substantially, it is time to replace the batteries.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy, and if not installed and used in accordance with the instructions, may cause harmfulinterference to radio or television reception. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment causes interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Note : Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.a. Make sure you have connected the receiver correctly to the computer's USB port.b. Check if the batteries have been installed correctly according to the diagram indicated in the battery cabinetc. For the best performance, we suggest that you place the receiver away from other electrical devices.d. Unplug and re-plug the receiver, or try another USB port. Try connecting directly to your computer instead of using a USB hub.
A wrong battery placementmay cause batteries overheat.+-Battery compartment cover2 * AAA batteriesReceiverWheel buttonPower on/off switchReceiverBattery coverMode buttonMouseInternet Forward & Backward buttonLED indicatorFeaturesBenefits of Virtual Touch MouseIntroduction A. Hardware Installation1. Insert the batteriesSystem Requirementsa. Remove the battery cover and insert new batteries.b. Move the power switch to the ON position.c. The Low Power red LED on the left side will be on for 6 seconds after the mouse power is switched to on.2. Connect the receiver1. Installationa. Turn on your PC.b. Connect the receiver to the USB port on PC.c. Please wait for a while for the PC to detect the receiver device. (The waiting time depends on PC hardware.)Congratulations on your purchase of the most innovative mouse, “Virtual Touch mouse”. The Virtual Touch mouse features and integrates the advantages of the patented technology of traditional mouse and the up-to-date touch screen technology, enabling users to operate touch screen functions on Windows 8 by just mouse button click and mouse move-ment, without fingers touching on screen. It is designed to make you more productive and more comfortable.2.4G Hz (distance 6~8m), 34 Channels 224 IDPatented and state-of-art emulating touch screen technology 2-in-1 design : a traditional mouse with touch screen functions for Windows 8 To emulate touch screen behaviors by just mouse button click and mouse movement.Two switchable modes: 1. standard mouse mode ----- for traditional mouse functions 2. Virtual-Touch mode ----- to emulate touch screen functions, with the Virtual Touch Driver installed. Longer battery life800/1600 dpi switchable (simultaneously press the middle button and right button for 3 seconds to change dpi), default at 1600dpiTo relieve hands fatigue from arm arising and finger touching on screen.To achieve the same functions of touch screen without finger touching on the screen.To operate the touch screen functions in a remote distance.Desktop and Notebook users can also experience the touch screen functions even with a non-touch screen monitor.To keep screen always clean. No need to touch the screen with finger tips.For standard mouse mode : Windows XP/Vista/7/8, and Mac OS 10.6 or higher For Virtual Touch mouse mode: Windows 8 only. [Not available for Windows RT]USB PortPCUSB portPull out the receiver B. Software InstallationsTo activate the Virtual Touch mode functions, please insert the accompanied CD into your computer, or download the Virtual Touch Driver from your local brand vendor's website.
4. Low Power Indicator : Red LEDIf the battery power is low, the Red LED as the low power indicator will blink for six seconds when the mouse is back to start working.Virtual Touch ModeMode buttonC. LED Indicators3. Power On Indicator : Red LEDWhen batteries are installed or power is switched to on, the Red LED will be on for 6 seconds.D. OPERATIONStandard Mouse ModeRight buttonMiddle buttonMode buttonVirtual touch buttonZoom buttonWindows buttonRight buttonMiddle buttonMode buttonLeft buttonBackward buttonForward button2. Dpi switch indicator : Red LEDSimultaneously press the middle button and the right button for 3 seconds to switch between 800 dpi and 1600 dpi. To 800 dpi: The Red LED will blink for one time. To 1600 dpi: The Red LED will blink for two times.1. Mode Indicator : Green LEDPress the mode switch button to switch between the two modes. Standard Mouse Mode : Green LED Off Virtual Touch Mode: Green LED flashing shortly when just switched to this mode or when just back to work after standby.Green LEDO.S. SupportLeft Button4th Button5th ButtonRight ButtonMiddle ButtonMode Switch ButtonFlashWindows 8 only Virtual-Touch button functionsZoom buttonWindows buttonOffWindows XP/Vista/7/8Mac OS 10.6 or higherTraditional Left button functionsForward in Internet ExplorerBackward in Internet ExplorerMode ComparisonVirtual-Touch Mode Standard ModeTraditional Right button functionsTraditional Middle button functionsTo switch between the 2 modes2. Un-installtaionTo un-install this driver, please go to "Control Panel", click "Uninstall a program", and select it from the list and click "Uninstall".
to fluidly browse your photosVirtual-Touch button: Press and hold the Virtual-Touch button, meanwhile slide the mouse along your desk. This equals to your finger touching across the screen. All the one-finger gestures on Windows 8 touch screen can be emulated by just the Virtual-Touch button pressing and mouse movement. Zoom button: Press and hold the Zoom button, sliding the mouse backward or forward along your desk, to emulate 2 fingers touching on the touch screen moving apart or closer, in order to zoom in/out a picture, a webpage or documents.Windows button: Push the Windows button to switch between wherever you are at and the Windows Start Screen.NoteThe Virtual-Touch mode functions are not available on Windows RT. Some applications, e.g. games, and 3D drawing software, e.g. AutoCAD, Pro/E may not support Virtual-Touch mode functions. Please switch to the Standard Mouse mode under those applications.Some applications, like Desktop screen, games, may not support Zoom in/out functions on Touch mode.The buttons on Virtual Touch mode will perform the same functions as the Standard Mouse mode, if the Virtual Touch Driver is not installed.E. Illustrations of Virtual-Touch Mode Functions on Windows 8Make sure the mouse is on the Virtual-Touch mode; the green LED on the left side will flash when the mouse is switched to this mode.Mode buttonVirtual-Touch button functionsPress and hold the Virtual-Touch button, flicking, swiping or dragging the mouse along the desk, to emulate fingers touching across the touch screen.a. Horizontal Scrollto fluidly navigate Metro Mode I.E. backward and forward
CAUTIONRisk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructionsZoom OutZoom Button FunctionPress and hold the Zoom button, sliding the mouse backward or forward along your desk, in order to zoom in/out a picture, a webpage or documentsWindows Button FunctionPush the Windows Button to switch between wherever you are at and the Metro Start Screen. Zoom Ind. Display the Application Bar on Metro modeSwipe from the top or bottom edge to display the applciation bar on Windows 8 Metro mode.d. Quick Charms Bar AccessSwipe from the right edge to display the charms bar.c. Swipe AppSwipe from the left edge to cycle through open app.b. Vertical Scrollto fluidly scroll through web pages or your documents

Navigation menu