AQUATIC AV AQRFDM6T Multimedia Locker User Manual IB 6500 V0 1 20161203

AQUATIC AV Multimedia Locker IB 6500 V0 1 20161203

15_AQ-RF-6UBT-T UserMan

www.aquaticav.com 1.6 Handheld Remote Control Charging The remote has a built-in Polymer Lithium rechargeable battery. It comes with a custom made charging cable. Connect one end to the blades of the remote control and another the other end to any USB female device (5V dc) for charging.Make sure the remote has been charged before used. 1.7 Handheld Remote Control SynchronizingThe remote has a receiver dongle (AQ-DM-6UBT-R) with a built-in male DIN connector. Connect the dongle to the female DIN connector of BlueCube Media Player (AQ-BC-6BT). The remote should already be paired from the factory, but if you need to synchronize the remote, follow below steps. 1. Make sure BlueCube Media Player (AQ-BC-6BT) is powered ON (red LED lit)2. Put the remote close to the dongle (AQ-DM-6UBT-R) (ideally within 0.5 meter) 2. Press and hold MODE until the LCD shows "Pairing in Progress". Release the button. 3. WIthin 2 seconds, the LCD will show "Paired". If it fails to pair, the LCD will show "Retry again". If this happens, wait 5 seconds and repeat the above procedures. For any additional remote controls, you will also need to synchroize those remote controls to the BlueCube Media Player (AQ-BC-6BT). If the pairing process is not successful, try again to put your remote close to the dongle.Depending on the frequency of usage, the remote might drain its battery. Please charge the remote before use. If the LCD shows nothing, it means that the battery has been drained. If you have lost your remote control and buy a new remote control, please follow the above steps to pair the remote control 1Remote control instruction
Location of Controls Bluecube Media Player 6500-915www.aquaticav.com2.1 Wireless Handheld Remote Control 231AUDIO AUDIO MODEMODEPAIRPAIRAUDIO AUDIO MODEMODEPAIRPAIRButtons AUX IN Mode Bluetooth ModePowerMode/PairVolume UpVolume Down23EXT TriggerAudioVBassFastForwardFastRewindPlay/Pause1123Press once: Toggle Operational mode to Standby mode or vice versaPress once: Change the sourcePress and hold: PairPress once: Volume upPress and hold: Fast volume upPress once: Volume downPress and hold: Fast volume downPress once: no functionPress and hold: no functionPress once: Next trackPress and hold: Fast ForwardPress once: no functionPress and hold: no functionPress once: Previous trackPress and hold: Fast backwardPress once: Toggle mutePress and hold: no functionPress once: Play/PausePress and hold: no functionPress once: Toggle Pump 1 on or offPress and hold: no functionPress once: Toggle Pump 2 on or offPress and hold: no functionPress once: Toggle Pump 3 on or offPress and hold: no functionPress once: Toggle EXT trigger ON (12V dc) or OFF Press and hold: no functionPress once: no function Press and hold: no functionPress once: Toggle VBass ON or OFFPress and hold: no function2.2 Wired Remote Control AQ-WR6 (sold separately) Coming Soon!AUDIO MENUShort press AUDIOBALANCE Use +/- to adjustFADERROCKBASS TREBLEShort press AUDIOUse +/- to adjustUse +/- to adjustCLASSICPOPUse +/- to adjustShort press AUDIOShort press AUDIOShort press AUDIOShort press AUDIOShort press AUDIO Long press AUDIOto save and exit Short press AUDIOLong press AUDIOto save and exit Long press AUDIOto save and exit Long press AUDIOto save and exit Long press AUDIOto save and exit Long press AUDIOto save and exit 2.2 Using Audio Menu on Handheld Remote Control (purchased separately)BlueCube+ Media Player (AQ-BC-6UBT) has equiped with a audio DSP to meet different listening experiences. 1. To enter audio menu, press once AUDIO button. 2. Each press of AUDIO button will advance to the next audio setting as described on the right. 3. In the audio menu, press and hold will save and exit the audio menu to the original mode. If you have chosen preset equalizer (Rock, Classic, or Pop), the previously set Bass, Treble will be overrided. 2
FCC Statements Bluecube Media Player AQ-BC-6UBTwww.aquaticav.com 12FCC IDMADE IN CHINAThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver. -- Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. :WBQAQRFDM6T
products with watertight reputationAquatic AV282 Kinney DriveSan Jose, CA65112, USAE-mail: info@aquaticav.comUS & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125www.aquaticav.com

Navigation menu