ALPS ALPINE 9ZUA145 Car Navigation Unit User Manual 68 29530Z12 A c3 comm FCC

Alpine Electronics Inc Car Navigation Unit 68 29530Z12 A c3 comm FCC

UserManual.wiki >

9ZUA145 User Manual >

(Short-Term Confidential) User Manual_3

Contents

1. (Short-Term Confidential) User Manual_1
2. (Short-Term Confidential) User Manual_2
3. (Short-Term Confidential) User Manual_3

(Short-Term Confidential) User Manual_3

60-ENRepeat PlayTouch [ ] to repeatedly play back the currently track.The tracks (files) will be played repeatedly.Touch [ ] again to deactivate Repeat play.Random Play (Shuffle)1Touch [ ].The Random Play mode select pop up screen is displayed.• The [ ] button displays the currently selected mode.2Select your desired Random Play mode.The selected Random Play mode changes the button.Switching Display Modes (During Video File Play Back)You can switch the Display Mode while playing a Video File.1Touch [ ].The Display Mode select pop up screen is displayed.• The [ ] button displays the currently selected mode. (e.g. [Normal])2Select your desired Display Mode.Wide modeIn Wide mode, the monitor displays a normal picture wider to fit in a wide-screen monitor by evenly stretching out the picture horizontally.Cinema modeIn Cinema mode, the monitor displays a normal picture by stretching out the picture horizontally and vertically. This mode is good for displaying a cinema type picture at the 16:9 ratio.Normal modeIn Normal mode, the monitor displays a normal picture at the centerof the screen with a vertical black band at each side.Track Repeat OFF Track Repeat Song : All files in the iPod are played back in random sequence.Album : The songs on each album are played back in proper order. Upon completing of all the songs on the album, the next album is selected randomly. This continues until all albums have been played.Songs : Song shuffle randomly plays back songs within a selected category (playlist, album, etc.). The songs within the category are played just once until all songs have been played.OFF : Random mode Off.

61-ENPandora® internet radio is your own FREE personalized radio now available to stream music on your Smartphone (which runs Android OS, iOS or BlackBerry OS).Just start with the name of one of your favorite artists, songs or classical composers and Pandora® will create a “station” that plays their music and more music like it.The unit enables you to interact with your Pandora® account by connecting an iPhone and smartphone that has the latest version of the Pandora® application installed.iPhone Pandora main screen exampleFunction mode Bluetooth Pandora main screen exampleFunction mode Station nameArtist NameSong NameAlbum NamePlaying timeArtwork displayTrack/Artist bookmark iconListening to Pandora®1Launch the Pandora® on the smartphone.2Press the (AUDIO) button to select Pandora® or Bluetooth Pandora® mode.The display shows the Pandora mode screen.• You can select and change the source in the Menu screen (page @@) or Favorites screen (page @@).3To pause playback, touch [ / ].4To skip to the next song, touch [ ].• The operation to replay a previous song is not available.• Pandora® limits the number of skips allowed on their service. If you attempt to skip songs beyond the limit, “You’ve reached your skip limit.” is displayed.• Even if you reconnect an iPhone without launching Pandora Application while the power is off, Pandora mode (not iPod mode) is displayed when power is turned back on.• Depending on the signal status, song may be stopped during playback.• While receiving an advertisement, you cannot operate any buttons other than [ / ] (play/pause) and [ ] (Search).• The playback time may not be correctly displayed.• The display content varies when ads are received.Pandora® internet radio (optional)

63-ENConnecting a Bluetooth Device (Bluetooth Pandora® Only)Registering a Bluetooth device in the unit enables automatic connection.If it does not connect automatically, run through the connection procedure again.1Touch [ ] (Settings).The Device Setting select pop up screen is displayed.2Touch [Reconnect].Bluetooth connection will start.1Touch [ ] (Settings).The Device Setting select pop up screen is displayed.2Touch [Disconnect].The Bluetooth connection is disconnected.If multiple Bluetooth devices are registered in this device, you can change the connection among the registered devices.1Touch [ ] (Settings).2Touch [Change].3Touch [ ] (Audio) or [ ] (Hands-free) of the selected device.The connection will transfer to the selected device.Disconnecting the Bluetooth ConnectionChanging the connecting Bluetooth Device

64-ENSiriusXM Tuner operation:When an optional SiriusXM Tuner is connected to this unit, the following operations may be performed.SiriusXM main screen exampleFunction modeThe Function mode switch is different depending on Tune Start mode and Replay mode.< When Tune Start mode is not available>< When Tune Start mode is available>< During Replay mode>Tag IndicatorWhen Tagging is available, the Tag indicator is shown.Info areaStation Info. Mode: Channel No/Long Channel Name/Category NameSong Info.Mode:Artist Name/Song Name/Album NameAlbum ArtThe image that corresponds with the channel currently being received is displayed.• You can change the artwork position. For details, see “Switching the Artwork Position” (page @@).Preset mode buttonTouch or swipe to the right when you use the Preset mode screen.Preset mode screen examplePreset buttonSwipe vertically in the list to change pages.Search mode buttonSwipe to the right when you use the Search mode screen.SiriusXM Satellite Radio Operation (Optional)

65-ENReceiving Channels with the SiriusXM TunerAbout SiriusXM Satellite RadioEverything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. A SiriusXM Tuner and Subscription are required. For more information, visit www.siriusxm.com/activatenow, or call 1-866-635-2349.To activate SiriusXM Canada service, go www.xmradio.ca and click on “ACTIVATE RADIO” in the top right corner, or call 1-877-438-9677.• The SiriusXM Satellite Radio controls on this unit are available only when a SiriusXM Tuner is connected.1Press the (AUDIO) button to select SiriusXM mode.The display shows the SiriusXM mode screen.• You can select and change the source in the Menu screen (page @@) or Favorites screen (page @@).2Touch [ ] or [ ] to select the desired channel. Touching and holding either button will rapidly browse through the channels.• Refer to the SiriusXM Tuner User Guide for details on how to install the SiriusXM Tuner.Tuning Channels by CategoryChannels are grouped into categories based on the type of content heard on the channels.1Touch [ ] (Category) on the SiriusXM main screen to activate the category browsing mode.The channels within the category of the current channel are listed.Category browsing mode screen exampleTouching the [Info] button changes the display of information for the channels in the category with the following three options.Channel No./Channel Name Channel No./Artist Name Channel No./Song Title Channel No./Content Info Channel No./ Channel Name2Touch [ ] (Category Up) or [ ] (Category Down) on the category browsing mode screen to select a desired category.The Category Name is shown at the top of the display.3Select the desired channel.• If no operation is performed for 10 seconds, the category browsing modeis canceled.Changing the DisplayText information, such as the channel name, artist name/feature, and song/program title, is available with SiriusXM or channel. The unit can display this text information as explained below.Touch [ ] (Info).Each time you touch this button, the Station Info. mode and the Song Info. mode switch alternately. For displayed contents, see “SiriusXM main screen example” (page @@).Checking the SiriusXM Radio ID NumberTo subscribe to the SiriusXM Satellite Radio service, it is necessary to locate and identify the Radio ID of your SiriusXM Tuner. You can check the Radio ID on the bottom surface of the SiriusXM Tuner box. You can also check it from this unit by performing the following procedure.1While receiving SiriusXM Radio, touch [ ] or [ ] to select channel “0”.The unit displays the ID number.2To cancel the ID number display, change the channel other than “0”.• The SiriusXM Radio ID does not contain the letters I, O, S, or F.Storing Channel PresetsYou can store 18 of your favorite SiriusXM channels for easy recall with Preset buttons.1Touch the Preset number you want to store, for at least 2 seconds.The selected channel is stored.2Repeat the procedure to store up to 17 other channels.A total of 18 channels can be stored in the preset memory.• For details on switching to the Preset mode screen, see in “Preset mode screen example” (page @@).• If you store a new channel into a preset which already has a channelassigned, the current channel will be cleared and replaced with the new one.Tuning Channels using PresetsTouch any one of the Preset numbers you have already stored in the Preset mode screen.The preset station is received.• For details on switching to the Preset mode screen, see in “Preset mode screen example” (page @@).

66-ENTune Start FunctionUse Tune Start to play music content from its beginning on programmed preset stations. The user can, therefore, enjoy the full track (i.e. song) rather than hearing what’s left from its current live playback position.1Touch and hold [ ] (Tune Start) for at least 2 seconds to activate or deactivate the Tune Start function.When the Tune Start function is activated, [ ] (Tune Start) is highlighted.2On the Preset Mode screen, touch the Preset number.Tune Start mode will begin.• To switch to the Preset mode screen, see in “SiriusXM main screen example” (page @@).• The number of preset channels that Tune Start can access differsdepending on the SiriusXM Tuner Box.• Touching [ ] (Track Up) or [ ] (Track Down) will move a track up/down.• To fast reverse, touch and hold [ ] (Track Up) and to fast forward,touch and hold [ ] (Track Down).• During Tune Start mode, the difference between the “ ” indicator and the current time is displayed (ex. -15:00).• When you touch [ ] (Live) or [ ] (Tune Start) during Tune Start, the program currently selected in Tune Start mode changes to the program currently being broadcast.• This function is available only when SiriusXM Tuner-SXV200 isconnected.• Preset stations that play other than music-type content will start playing the channel from the current live play point when selected.Tune Scan FunctionWhile listening to SiriusXM Satellite Radio, you can scan through all the songs you missed from your current band of preset channels.1Touch [ ] (Tune Scan).The [ ] (Tune Scan) highlighted during Tune Scan mode.2Touch [ ] (Tune Scan) during scan playback, tunescan mode will be canceled and the selected track will be played back normally.Touch and hold [ ] (Tune Scan) for at least 2 seconds during scan playback to cancel Tune Scan mode. The tuner returns to the channel before Tune Scan was initiated.• This function is available when SiriusXM Tuner-SXV200 is connected.• If no operation is performed during the scanning process, when scanning finishes, the next mode depends on the SiriusXM Tuner.• During Tune Scan mode, the artist and song name will be displayed.• The SiriusXM Tune scans through the songs from the preset music channels on the current band only, scanning from oldest to newest.• The number of Preset channels and the play times that can performTune Scan differ depending on the SiriusXM Tuner box.Search Function1Touch the Search mode button on the Preset modescreen.The Search list screen appears.• To switch into Search mode, see in “Preset mode screenexample” (page 46).Search item:All Channels / Category Name*1 / My Music / My Games / Featured*2*1 The Category name for the channel currently being received is displayed.*2 Displayed only when the SiriusXM Tuner-SXV200 is connected.• You can switch the category by touching [ ] (Category Up) or [ ] (Category Down) on the List screen after selecting a Search item other than Featured.• You can switch the display format by touching [ ] (Info) in the List screen after selecting a Search item.Channel No./Channel Name Channel No./Artist Name Channel No./Song Title Channel No./Content Info Channel No./Channel NameSearching by Channel2Touch [All Channels].All Channels will be displayed in a list.3Touch the selected channel.Searching by Category2Touch Category Name.The channels within the category of the current channel are listed.3Touch the selected channel.The channel you selected is received.Searching by My Music2Touch [My Music]*.The artist names and song titles that you have stored and are currently playing will be displayed in a list.*Displayed only when the stored song or artist is broadcasting.3Touch the desired artist/song.The channel of the selected artist/song being broadcast is received.Searching by My Games2Touch [My Games]*.The sport teams that you have stored and the game is currently broadcasting will be displayed in a list.*Displayed only when the game of stored team is broadcasting.3Touch the desired team.The channel of the selected game being broadcast is received.

67-ENSearching by Featured Favorites1Touch [Featured]*.The Category that SXM recommends will be displayed in a list.*Displayed only when the SiriusXM Tuner-SXV200 is connected.2Touch the desired category.3Touch the desired channel within the selected category.Selecting the Channel DirectlyYou can directly select the channel number on the display of the numeric keypad.1Touch [ ] (Direct Tune).The numeric keypad input screen is displayed.2Touch to input the channel number.3Touch [Enter].The selected channel is received.Storing the desired Song/ArtistWhile listening to SiriusXM Satellite Radio, you can be alerted when your favorite songs or artists are playing on other channels. An interruption Alert will be displayed when a matching artist or song is found on another channel. For receiving interruption Alert information, see “Receiving and Tuning to an Alert”.1Touch [##] (Set Alert) for at least 2 seconds on the SiriusXM mode screen.The Memory type selection screen is displayed.2Touch the ”Artist Saved” or “Song Saved” to select thestore type.Scrolling text of the Artist’s name (Song Title), Total registrations, and Remaining number of registration slots is displayed for 2 seconds, then the Artist or Song is registered as an Artist alert or Song alert.• The maximum number of registered Teams, Artists, and Songs is 50. For details on how to register a Favorite Team, see “Setting the Favorite Sports Team Alerts” (page @@).• “Artist /Song Unavailable” appears on the display if both the artist and song is not available to be stored. • “Artist (Song) Unavailable” is displayed if just the artist (song) is notavailable to be stored. “Artist (Song) Saved” is displayed if this Artist (Song) was previouslystored.• If there is no memory space, “Alert Memory Full” is displayed, and thenyou are asked whether you want to replace a stored item. If you select “OK,” then the list of stored alert items is displayed. Touch the item that you want to replace.Receiving and Tuning to an AlertWhenever a stored sports team, artist, or song is playing on another channel, an interruption Alert appears on the unit display. To tune to the game, artist or song identified by the alert, follow the steps below:1When stored information is broadcast, after displaying“Song Alert”, “Artist Alert” or “Game Alert,” the screen changes to My Music list*1 or My Games list*2 display.*1 Only for Song Alert and Artist Alert.*2 Only for Game Alert.2Touch the channel on the list you want to receive.The display changes to the selected channel and the channel is received.• Touch [ ] (Info) on the My Music list/My Games list screen, the information of the broadcasting channels will be changed.Each time you touch the [ ] (Info), the display changes as below.My Music list (Artist Alert):Artist name Song Title Channel name Artist nameMy Music List (Song Alert):Song Title Channel Name Artist Name Song TitleMy Games list:League Short Name/Team Abbrev/Team Nickname Channel name League Short Name/Team Abbrev/Team NicknameReplay FunctionIn SiriusXM mode, you can pause, rewind and replay of live Satellite Radio.Replay mode screen exampleBuffer usageCurrent Replay pointReplay status indicator ( or )Replay rangeTime to live1Touch [ / ] to Pause playing of the channel content.The “ (Pause)” indicator and replay progress bar is displayed.2Touch [ / ] again to resume playing the content.The “ (Play)” indicator lights up and offset playback commences.

68-EN3Touch [ ] to exit Instant Replay and listen to livecontent.• To fast reverse, touch and hold [ ] and to fast forward, touch and hold [ ].• Touching [ ] or [ ] will move a track up/down.• If you change channels while in Replay mode, the contents of the replaybuffer are emptied.• The allowed recording time differs depending on the SiriusXM Tunerbox.Parental Lock FunctionThis function can help restrict the listening of channels to children of appropriate age levels only. For information on setting the Parental Control passcode, see “Setting the Parental Lock” (page @@).When a locked channel is selected, “Channel <xxx> Locked” is displayed and then the numeric keypad appears for you to enter the passcode.Input the 4-digit passcode you set in “Setting the Parental Lock” (page @@).The initial number is 0000.• If you input a wrong passcode, “Incorrect Pass Code entered” isdisplayed.• After entering the correct passcode, you can access all locked channelswithout entering the passcode again until the unit is powered off andthen back on.Using Jump Memory and Jump Recall functionThe Jump Channel is a special channel that you can jump to with the press of a dedicated button and then jump back to the previous channel. This channel is often used to select your favorite SiriusXM traffic and weather report channel.1To store the Jump channel in memory, touch and hold [ ] (Jump) for at least 2 seconds.2Touch [ ] (Jump) to recall and tune to the saved Jump channel.3Touch [ ] (Jump) again to receive the previous channel.• While receiving the Jump channel, you cannot perform otheroperations.• Only one channel can be stored as the jump source channel. When youwant to store a new channel, the old channel will be cleared and the new one will be memorized.Storing the Tag informationiTunes Tagging lets you tag songs heard on SiriusXM channels. Using this unit in conjunction with an optional SiriusXM Tuner and a Tagging compatible iPod/iPhone, you can tag the music that you listen to, then transfer the tag information to your iPod/iPhone, and later, when your iPod/iPhone is connected to iTunes, you can preview, buy and download your tagged songs. For details, refer to the Owner’s Manual of the Tagging compatible iPod/iPhone.The “Tag” indicator will appear when a song playing on a SiriusXM channel has tag information available.When Tagging is available, the “Tag” indicator is shown.When a desired song is heard on an SiriusXM channel, touch the [ ] (Tag) to save its tag information.If no iPod/iPhone is connected, “Tag count X” is displayed (X is the total amount of the tag information stored in this unit).• During tagging, the iPod/iPhone takes priority to save the tag information. If no iPod/iPhone is connected, the tag information issaved to this unit.• When the memory of iPod/iPhone is full, “iPod memory full.” is displayed. The tag information will be stored to the unit.• If the tagging operation is interrupted by a hands-free phone call, the tagging operation will be canceled and the unit will display “Cannot Tag”.• This unit can store up to 50 pieces of tag information. When thememory of the unit is full, “Tag count 50. Tuner memory full. Connect iPod.” may be displayed.• When the iPod/iPhone is disconnected from the unit during tagging, its tag information will be stored in the unit.• If there is stored tag information on the unit, when an iPod/iPhone supporting the tag function is connected, the stored tag information will be transferred to the iPod/iPhone automatically. When the iPod/ iPhone memory becomes full, “iPod memory full <xx> remaining.” maybe displayed, and any remaining tag information on the unit will not be transferred to the iPod/iPhone.• If tag information already exists, “Already Tagged” will be displayed when you try to tag information again.Tag indicator

69-ENDevices supporting HDMI can connect and play back through this unit (for example, an optional DVE-5300 (DVD Player), iPhone or other Smartphones). When making HDMI connections, you need to set HDMI on the unit suitable for the connected device. For details, see “HDMI Setup” (page 45).• The HDMI/MHL connecting cable differs depending on the connected device corresponding to HDMI. Prepare optional HDMI/MHL connecting cable sets suitable for your device.When you connect an optional DVE-5300 (DVD Player), you can operate it from the unit. For details on how to operate the DVD player, see “DVD Player Operation” (page 69).For details on how to operate iPhones and Smartphones, see “HDMI Operation” (page 78).• The HDMI connector is for use exclusively with a standard DVD Player. Other HDMI devices (i.e. iPhone, etc.) cannot be used.You can operate discs using the Remote Control unit supplied with the DVE-5300 (DVD Player). For detailed notes on handling and operating the Remote Control unit, see “About Remote Control Operation (X110 with DVE-5300X only)” (page 97).• For precautions concerning the use of discs, usable discs, and formats, see “Cautions about Discs (X110 with DVE-5300X only)” (page 99) and “About the Supported Formats” (page 101).Inserting/Ejecting a DiscInsert the disc with the label side facing up.For X110 with DVE-5300XFor X108U/INE-W967HD (DVE-5300)Insert the disc until it is automatically pulled into the unit.• Do not touch the surface of the disc directly with your fingers.• Before inserting or removing the disc, always turn the ignition key toACC or ON. • You cannot remove or insert the disc with the ignition key turned toOFF.Press (Eject) button.When the disc has been ejected part way, take it out.• Press the [ ] (Eject) button on the front panel of the optional DVD Player (DVE-5300).• If the disc cannot be ejected by pressing [ ] (Eject), press and hold[ ] (Eject) again for at least 2 seconds.DVD Player SETUPYou can setup only when a disc is not inserted or playback pauses.1Touch [ ] (Setup).The Setup main screen is displayed.Setting items:System Setup / DVD Contents Setup / CD Contents Setup / Audio Setup2Touch [ ] or [ ] to select the setting item.3Touch [Enter] , then touch [ ], [ ], [ ] or [ ] to change the setting item.4Touch [ ] to return to the main source screen.• Touch [ ] (Return) to return to the previous display.Switching the Bar ColorSelect the colors (8) used for highlighting items in the System Setup screen.Setting items:Bar ColorSetting contents:Blue / Green / Light blue / Amber (Initial setting) / Aqua blue / Yellow / Red / WhiteHDMI Device (Optional)DVD Player OperationInserting the DiscRemoving the DiscSystem Setup

70-ENSetting the TV Screen ModeSetting item:TV Screen Aspect Setting contents:16:9 (Initial setting) / 4:3LB / 4:3PS• For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc’s jacket.)• You can also switch the TV Screen mode by touching [ ] (Display Mode) on the display of this unit. For details, see “Switching Display Modes (During Video File Play Back)” (page 60).4:3 LETTER BOX:Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black stripes visible at the top and bottom of the screen (when playing a 16:9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatrical release of the movie.4:3 PAN-SCAN:Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie).16:9 WIDE:Select this when connected to a wide screen TV. This is the factory setting.Delaying Image OutputUse this function when an external audio processor is connected. Depending on the connected audio processor, the audio and image currently played back may not be output at the same time. In this case, you can output an image delayed by 0.1 second by setting to On.Setting item:Video DelaySetting contents:Off (Initial setting) / On• If a disc with a high compression rate is played back, the image and audio may be distorted.Returning to the Initial SettingYou can return the contents you previously set to the initial factory settings.Setting item:Setup InitializeSetting contents:Yes / No (Initial setting)Setting the languageThe audio language, subtitle language and menu language can be set according to your preferences.Once set, this becomes the default language. This function is convenient when you always want to listen in English. (Not all discs allow changing the default language. If not, the factory default language applies.)Setting item:LanguagesSetting contents:Audio / Subtitle / MenuFurther Setting contents: Auto (Initial setting) / Off (Subtitle only) / English / French / Japanese / Italian / German / Swedish / Spanish / Chinese / Russian / Others• If you change the language setting when the disc is in the unit, the setting is decided with one of the following operations.- Disc eject.- Turn OFF the main unit.- Switch the source on the head unit.• To temporarily change the language of the current disc, either do so from the DVD menu or using the operation described in the section “Switching the Audio Tracks” (page 77).• If the disc does not include the selected language, the disc’s default language is set.• Languages set upon shipment from the factory:Audio language : AutoSubtitle language : AutoMenu language : Auto• Touch [ ] (Return) to return to the previous display.On: Output image is delayed by 0.1 second.Yes: Returns to the initial setting.No: Does not returns to the initial setting.DVD Contents SetupAudio: Set the audio track language.Subtitle: Set the language of the subtitles displayed on the screen.Menu: Set the language used for the menus (title menu, etc.).Auto: The disc is played with the audio language or subtitle language set as the priority language for the disc.Off: Subtitles are not displayed. (Subtitle only)Others: Set this to play the disc with a language other than one of the languages displayed. Touch [Enter], then use the numeric keypad (“0” to “9”) to input the 4-digit language code. Then touch [Enter] again. For the language codes, refer to “List of Language Codes” (page 104).

71-ENPlaying MP3/WMA/AAC/WAV DataSetting item:CD Play ModeSetting contents:CD-DA / Compress (Initial setting)This unit can play back CDs containing both CD and MP3/WMA/AAC/WAV data (created in Enhanced CD (CD Extra) format).Setting the Video CD Play ModeWhen playing a Playback Control (PBC) enabled video CD, you can choose to set PBC On or Off.Setting item:VCD Play ModeSetting contents:PBC On (Initial setting) / PBC Off• You can set PBC On or Off directly by pressing MENU.Displaying the Disc Status Automatically (CD/MP3/WMA/AAC/WAV only)When playing a CD/MP3/WMA/AAC/WAV file, you can choose to display the Disc Status (track number, etc.) automatically.Setting item:Audio DisplaySetting contents:Off / On (Initial setting)Setting the Digital OutputUse the following procedure to set the digital audio signal output from the DVE-5300 (DVD Player).Setting item:Digital OutOutput Modes:Dolby D / DTSSetting contents:Bitstream / LPCM (Initial setting)• Touch [ ] (Return) will return to the previous screen.• Set to “LPCM” to connect to the unit.Digital audio outputSetting the Downmix ModeThis function applies to Dolby Digital, DTS stream sound.Setting item:Downmix ModeSetting contents:Stereo (Initial setting) / Surround EncodedCD Contents SetupCD-DA: Only CD data can be played back.Compress: Only MP3/WMA/AAC/WAV data can be playedback.PBC On: The PBC menu is displayed.PBC Off: The PBC menu is not displayed.On: The Disc Status is displayed automatically while playing back.Off: Disc Status is not displayed automatically while playing back.Audio SetupBitstream: Select “Bitstream” when you want to connect a digital audio processor to play Dolby Digital or DTS audio. When “Bitstream” is selected, the HDMI audio will be muted. The DVE-5300 (DVD Player) optical output must be used for the external processor.LPCM: The audio signal recorded on the disc is converted to 48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDs and CDs) linear PCM audio signals for output.Disc Audio recording format Digital output settingOptical digital audio output (when a digital audio processor is connected)Digital audio output (HDMI output)Format Fs QLPCM(DVD, CD)48/96kHz 16/20/24bitBitstream LPCM 2chDown mix(48kHz/16bit)—LPCMLPCM 2chDown mix(48kHz/16bit)44.1kHz 16bitBitstream LPCM 2ch(44.1kHz/16bit)—LPCM LPCM 2ch(44.1kHz/16bit)Dolby Digital(DVD) 48kHz 16/18/20bitBitstream Bit stream(Max 7.1ch) —LPCMLPCM Encode2ch Down mix(48kHz/16bit)LPCM Encode2ch Down mix(48kHz/16bit)DTS(DVD, CD)48/96kHz 16/20/24bitBitstream Bit stream(Max 6.1ch) —LPCMLPCM Encode2ch Down mix(48kHz/16bit)LPCM Encode2ch Down mix(48kHz/16bit)44.1kHz 16/20/24bitBitstream Bit stream(Max 5.1ch) —LPCMLPCM Encode2ch Down mix(44.1kHz/16bit)LPCM Encode2ch Down mix(44.1kHz/16bit)MPEG1(DVD, Video CD)48kHz 16bitBitstream Bitstream (Max 5.1ch) —LPCMLPCM Encode2ch Down mix(48kHz/16bit)LPCM Encode2ch Down mix(48kHz/16bit)44.1kHz 16bitBitstream Bit stream —LPCMLPCM Encode2ch(44.1kHz/16bit)LPCM Encode2ch(44.1kHz/16bit)MPEG2(DVD) 48kHz 16bitBitstream Bit stream(Max 5.1ch) —LPCMLPCM Encode2ch Down mix(48kHz/16bit)LPCM Encode2ch Down mix (48kHz/16bit)MP3/WMA/AAC8/11.025/12/16/22.05/24/32/44.1/48kHz16bitBitstream LPCM Encode2ch (32kHz,44.1kHz or48kHz/16bit)—LPCMLPCM Encode2ch (32kHz, 44.1kHz or 48kHz/16bit)WAV 44.1kHz 16bitBitstream LPCM Encode2ch(44.1kHz/16bit)—LPCMLPCM Encode2ch(44.1kHz/16bit)Stereo: Stereo Downmix.Surround Encoded:Surround compatible Downmix.

72-ENMP3/WMA/AAC main screen exampleInfo modeFunction modeCurrent song no.Total song no.Album titleSong titleArtist titleElapsed time• If there is no CD text, the message “No Text” appears.Playback1Press the (AUDIO) button to select DVD (CD) mode.The display shows the DVD (CD) mode screen.• You can also select and change from the Menu screen (page 21) or Favorite screen (page 24).When a disc is inserted into the disc slot of the DVD Player, with the label side facing up, the unit starts playback of the disc.2Touch [ ] or [ ] to select the desired track (file).Returning to the beginning of the current (or previous) track (file):Touch [ ].Fast reverse :Touch and hold [ ].Advancing to the beginning of the next track (file) :Touch [ ].Fast forward :Touch and hold [ ].• The , buttons provide the same functions above.3To pause playback, touch [ / ].• The unit can play back MP3/WMA/AAC/WAV files saved to CD or DVD.For further information about playing or storing MP3/WMA/AAC/WAV files, see pages 101 and 102 before using the unit.• Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit.• If a disc contains both audio data and MP3/WMA/AAC/WAV data, this unit plays back only the audio data.• The track display for CD audio data playback shows the track numbers recorded on the disc.• If an MP3/WMA/AAC/WAV disc with many files and folders is played, it may take longer than normal to start playback.• The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.• For details on switching the HDMI source when you have connected the HDMI selector and two HDMI devices, see “HDMI Operation” (page @@).Stopping PlaybackTouch [ ] during playback.“STOP” indicator is displayed, and playback stops.• Playback starts from the beginning when [ / ] is touched while playback is stopped.Repeat PlayTouch [ ] to repeatedly play back.The tracks (files) will be played repeatedly.The repeat mode switches every time the button is touched.*Only files in a folder are repeatedly played back.• If the Repeat Play mode is activated during MIX playback, the MIX mode will be canceled.CD/MP3/WMA/AAC/WAVCD:Track Repeat Off Track RepeatMP3/WMA/AAC:Repeat File Repeat Folder* Off Repeat File

73-ENMIX (Random Play)Touch [ ] during playback.The tracks (files) on the disc will be played back in a random sequence.The MIX mode switches every time [ ] is touched.*1 Only files in a folder are played back in random sequence.*2 All files on the disc will be played back in a random sequence.• If the MIX mode is activated during Repeat playback, the Repeat Play mode will be canceled.• If you select a track by using the search mode, the MIX play mode will be canceled.File/Folder Name Search (Concerning MP3/WMA/AAC/WAV)1Touch [ ] (Search) during playback.The search mode is activated.The mode is changed to the search mode, and the list select panel appears.2Touch [ ] or [ ] in the list select panel to select Folder or File, then touch [Enter].When selecting Folder, select File following same procedure, then touch [Enter].• When there are 9 or more names on the list, a page number is displayed. Touch [ ] or [ ] to change the page.• Touch [ ] or [ ] to change the list select panel location from right to left or vice-versa.• To return to the previous hierarchy, touch [ ].Selecting Folders (Concerning MP3/WMA/AAC/WAV)Touch [ ] (Folder Down) or [ ] (Folder Up) to select the folder.Info Mode Function You can display the DISC information.1During playback, touch [ ] (Display).The playback status is displayed.2The playback status display closes when [ ] (Display) is touched.• For details on the display example, see Info mode in “MP3/WMA/AAC main screen example” (page 72).DVD Video main screen exampleFunction modeInfo modeTitle no./Chapter no.Audio signal output/Subtitle/AngleElapsed timeVideo CD main screen exampleFunction modeCD:MIX Off MIXMP3/WMA/AAC:MIX Folder*1MIX Disc*2Off MIX Folder*1DVD

74-ENInfo modeCurrent track no.Playback control (PBC)/Current audio statusElapsed timeDisc types that can be used for each heading are represented by the following marks.The DVD operation screen displayTouch the screen while the DVD playback screen is displayed.To display the operation screen, touch [Control].• The operation screen changes to the visual screen in the DVD mode for 5 seconds after an operation has been performed.• If you try to activate the DVD while driving, the display will show the warning-Picture off for your safety.• Some operations cannot be carried out depending on the disc or playback screen.Playing a Disc 1Press the (AUDIO) button to select DVD (CD) mode.The display shows the DVD (CD) mode screen.When a disc is inserted into the disc slot of the DVD Player, with the label side facing up, the unit starts playback of the disc.• The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it.• DO NOT insert discs containing maps for the navigation system. Doing so could result in damage.• For details on switching the HDMI source when you have connected the HDMI selector and two HDMI devices, see “HDMI Operation” (page @@).DVD Commercial Video discs (used for the distribution of movies, etc.) or a DVD-R/DVD-RW, DVD+R/DVD+RW recorded in a video mode can be used.Video-CD discs can be used.WARNINGIt is dangerous for the driver to watch the DVD while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.Install the unit correctly so that the driver cannot watch DVD unless the vehicle is stopped and the emergency brake is applied.If the unit is not installed correctly, the driver will be able to watch DVDs while driving the vehicle and may be distracted and could cause an accident. The driver or other people could be severely injured.CAUTION• Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.• Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.• If you switch the power or Ignition key OFF or change sources during playback, playback will continue where you left off when you resume playback. • If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen:• Play Position Memory Function Even if you turn power off or switch the Ignition key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again.

75-ENOn DVD mode, menu screens may appear automatically. If this happens, perform the operation described below to start playback.Direct Menu Operations 1Touch the screen while the DVD menu is being displayed.Directly touch operation switches displayed on the screen to operate.• To display the operation screen, touch [Control].2Touch the DVD menu directly.Menu Operations 1Touch [ ] (Menu Control).The menu operation mode will be displayed.2Touch [Key].The Key panel is displayed.Touch [Return] to return to the previous display.3Select a desired menu item by touching [ ], [ ], [ ] or [ ].• Touch [ ] or [ ] to change the Key panel location from right to left or vice-versa. • Touching [ ] in the operation panel returns to the screen in step 1.• Touching [Key] displays the numeric keypad input mode screen.For details of the numeric keypad input mode screen, see “Numeric Keypad Input Operations” (page 75).4Touch [Enter] to confirm the selected item.1Touch [key] again in the menu operation mode.The numeric keypad input mode screen appears2Touch a desired number.Touch [ ] to delete an entered number.To delete all the numbers you have entered, touch [ ] for at least 2 seconds.3Touch [Enter] on the numeric keypad input mode screen to confirm your selection.Touch [ ] to hide the keypad display.When a DVD contains two or more titles, the top menu screen appears.Touch [ ] (Top Menu).The top menu screen appears.• To perform necessary operations, see “If a Menu Screen Appears” (page 75).With a DVD having two or more menus, a menu screen will appear for the programmes available, in addition to the main programmes.Touch [ ] (Menu).The Root menu screen appears.• To perform necessary operations, see “If a Menu Screen Appears” (page 75).Playing Still Frames (Pausing) 1During playback, touch [ / ].2Touch [ / ] to resume playback.• No sound is played during the still frame mode.• The image or sound may stop temporarily when playback starts from the pause mode. This is not a malfunction.If a Menu Screen Appears• Some operations cannot be performed depending on the disc.Numeric Keypad Input Operations Displaying the Top Menu Screen Displaying the Menu Screen

76-ENStopping Playback Touch [ ] during playback.“ ” indicator is displayed, and playback stops.• Playback starts from the beginning when [ / ] is touched while playback is stopped.Fast-forwarding/Fast-reversing 1During playback, touch and hold [ ] (Fast-reverse) or touch and hold [ ] (Fast-forward).Touch and hold for more than 1 second to forward/reverse at double speed.Every time you touch [ ]/[ ] during fast- reverse/fast- forward, the speed changes as follows: 2x 8x 32x 2x.2Touch [ / ] to return to normal playback.• No sound is played back during fast-forwarding/fast-reversing.• On DVD mode, the menu screen may reappear during fast-forwarding/fast-reversing.• This operation may not be possible on certain discs.Finding the Beginnings of Chapters/Tracks/Files During playback, touch [ ] or [ ].The chapter/track/file switches each time the button is touched, and playback of the selected chapter/track/file starts.• Some DVDs do not have chapters.• Be sure to turn PBC off before starting the search. See “Setting the Video CD Play Mode” (page 71).Forward/Reverse frame-by-frame Playback 1In the pause mode, touch [ ] or [ ].The picture advances by one frame each time the button is touched.2Touch [ / ] to return to normal mode.• No sound is output during forward frame-by-frame playback.• You can only execute reverse frame-by frame playback when playing DVD-V.Repeat Playback Use this function to play the disc’s titles, chapters or tracks, etc., repeatedly.Touch [ ] to repeatedly play back.The repeat mode switches every time the button is touched.DVD Video• The Repeat mode is always turned off when [ ] is touched and held for at least 2 seconds.• Only discs containing a Playlist can be displayed.Video CD• Display may vary depending on the connected devices.• The track/disc repeat modes cannot be used on Video CDs with playback control (PBC). These modes can be carried out after turning PBC off. See “Setting the Video CD Play Mode” (page 71).• For some discs it is not possible to switch the repeat mode.: Touch this to start playback from the beginning of the following chapter, track or file.: Touch this to start playback from the beginning of the current chapter, track or file.Supplementary explanations“Chapters” are divisions of movies or musical selections on DVDs.“Tracks” are divisions of movies or musical selections on Video CD.The chapter is played repeatedly.The title is played repeatedly.Playback returns to normal mode.ChapterTitleOffThe track is played repeatedly.TrackThe disc is played repeatedly.Off

77-ENSearching by Title Number Use this function to easily find positions on the DVD using the DVD’s titles. Perform operations while playback is stopped.1Touch [ ] (Menu Control).The menu operation mode screen appears.2Touch [Key] again in the menu operation mode.3Enter a desired title by touching its number.See page 75 for operation of the numeric keypad.4Touch [Enter].Playback will start from the number selected.5Touch [ ].• This function cannot be used on discs on which no title numbers are recorded.• Some disc may not accept any operation.Searching Directly by Chapter Number Use this function to easily move to the beginnings of the chapters on the disc. Perform operations during playback, during PRE-STOP or while playback is paused.1Touch [ ] (Menu Control).The menu operation mode screen appears.2Touch [Key] again in the menu operation mode.3Touch and enter the chapter number you want to play.See page 75 for operation of the numeric keypad.4Touch [Enter] to confirm your selection.Playback will start from the selected chapter.5Touch [ ].• This function is not available for a disc on which chapters are not stored.Switching the Angle On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.Touch [ ] (Angle).The angle switches between the angles recorded on the disc every time the button is touched.• Some time may be required for the angle to change.• Depending on the disc, the angle may switch in one of two ways.- Seamless: The angle switches smoothly.- Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches.Switching the Audio Tracks DVDs with multiple audio tracks or languages allow switching the sound during playback.Touch [ ] (Audio).The sound switches between the alternate audio tracks recorded on the disc every time the button is touched.• The alternate track selected becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that track, the disc’s default language is selected instead.• Not all discs will allow changing the alternate audio tracks during playback. In these cases, select audio tracks from the DVDs menu.• There may be a delay before the selected alternate track begins to play.Video CDs with multiplex audioTouch [ ] (Audio).The left and right channels will be output as shown below, each time the button is touched.Audio: LL Audio: RR Audio: LR Audio: LRSwitching the Subtitles (Subtitle Language) With DVDs on which multiple subtitle languages are recorded, the subtitle language can be switched during playback; moreover, subtitles can be hidden.Touch [ ] (Sub Title).Touching this button repeatedly selects sequentially the subtitle languages recorded on the disc, and then turns the subtitles OFF.• There may be a delay before the selected subtitle appears.• Not all discs will allow changing the subtitles during playback. In these cases, select subtitles from the DVDs menu.• The subtitle language selected becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that language, the disc’s default language is selected instead.However, the subtitle language may differ depending on the disc.• For some discs, the subtitles will be displayed even when this is set to OFF. However, the subtitle language may differ depending on the disc.Info Mode Function You can display the DISC information.1During playback, touch [ ] (Display).The playback status is displayed.2The playback status display closes when [ ] (Display) is touched.• For details on the display example, see Info mode in “DVD Video/Video CD main screen example” (pages 73, 74).Switching Display ModesYou can switch the Display Mode by touching [ ] (Display Mode). For details, see “Switching Display Modes (During Video File Play Back)” (page 60).

78-ENiPhone, Smartphone, etc.The output of your electronic device will be mirrored on this unit through the HDMI connector. Control from this unit is not possible.• The electronic device must possess an HDMI output interface.• Not all devices with an HDMI output interface can be recognized by this unit.• Use only the Alpine Special HDMI connection cable.1Press the (AUDIO) button to select HDMI mode.The display shows the HDMI mode screen.• You can select and change the source in the Menu screen (page 21) or Favorite screen (page 24).2In HDMI player mode, the screen of the device displays the content of electronic equipment by mirror image.You can select Display Mode. For details, see “Switching Display Modes (During Video File Play Back)” (page 60).Switching the source when two HDMI devices are connectedYou can switch the source only when you have connected the HDMI selector and “Setting the HDMI selector On/Off ” is set to “On.”Screen example when the HDMI Setup is “HDMI 1”Touch [ ] (HDMI 2).The HDMI source changes to HDMI 2, and the Function button changes to [ ] (HDMI 1).Each time you touch [ ] (HDMI 1)* or [ ] (HDMI 2), the HDMI source changes.*When HDMI Setup is “DVD,” the Function button is changed to [ ] (DVD).HDMI Operation

80-ENAnswering a CallIncoming calls are announced by the received call ring tone and a displayed message (PHONE No., etc.).1An incoming call triggers the ringtone and an incoming call display.2Touch incoming call notification screen.The call starts.• During a call, the audio for the current mode on the unit is muted. After calling, playback will resume.• When the caller’s number is transmitted to the system, if the caller’sname is stored in the phone book, the name is displayed. If the name isnot stored, the number is displayed. When neither the name or the number is unavailable, “Unknown” is displayed.• Touch [ ] (Decline) to reject an incoming call.• By touching the call info area during phone call, you can change to thePhone Operation screen and adjust the speech volume, etc. For details, see “Operations During a Conversation” (page 83).• Touch [ ] during a conversation to hide the call info area. To display it again, Touch or swipe downward on [ ] on the upper part of the screen.• During an incoming call or a conversation on the Priority1 (Priority2)Hands-Free Phone, if there is an incoming call on the Prority2 (Priority1) Hands-Free Phone, you cannot answer the call on the Prority2 (Priority1) Hands-Free Phone without first ending the call on the Prority1 (Priority2) Hands-Free Phone.Hanging up the Telephone1Touch [ ] (End Call).The call finishes.Call Waiting FunctionIf a call comes in from another phone during a call, a notice is displayed on the screen. This function can only be used if the connected mobile phone has a call waiting function service included.Second incoming call during a conversation in the call info areaBy touching the second incoming call notification screen, you can put the current call on hold and answer the second call.• To switch a party, touch the on-hold screen.• To finish a call, touch [ ] (End Call).Incoming call notification screenCall info areaSecond incoming call notification screenOn-hold screen

81-ENSecond incoming call during a conversation in the Phone Operation screen• The display or operation may differ depending on the connected mobilephone or the caller’s mobile phone.By touching the second incoming call notification screen, you can put the current call on hold and answer the second call.• To switch a party, touch the on-hold screen.• To finish a call, touch [ ] (End Call).• This unit supports only the Call Waiting function of a mobile phone. The second call function and three-way calling function of a mobile phone cannot be operated from this unit. Also the screen display maymalfunction.CallingYou can make a phone call using the Short Cut function of numbers that have been registered in Favorite. For details, see “Favorite Function” (page 24).1Press the (Favorite) button.The Favorite screen is displayed.Favorite screen2Touch the Short Cut icon.A contact’s name, phone number, and a confirmation message of the phone number are displayed.3Touch [Call].The phone call is started.Making a phone call from the Recent Events list1Touch [ ] (Recents) to change to the Recent Events list screen.Dialled history: Names or Numbers/DateReceived history: Names or Numbers/DateMissed Incoming history: Names or Numbers/Date2Touch the name of the contact you want to call.The Detail info screen is displayed.3Touch [ ].The phone call is started.Calling from the Contacts list (Phone Book)1Touch [ ] (Contacts) to change to the Contacts list screen.2Touch the name of the contact you want to call.The Phone Operation screen is displayed.3Touch [ ].The phone call is started.Calling by Favorite FunctionSecond incoming call notification screenCall On Hold screenMaking a phone call using the Phone Menu

82-ENEntering a Phone Number to Make a Call1Touch [ ] (Keypad).The number input screen (Keypad) appears.Touch [ ] to delete an entered number.Touch [Delete All] to delete all entered numbers.2Enter the phone number you wish to call.• You can enter up to 31 digits.3Touch [ ] (Call).A confirmation message of the phone number appears.4Touch [Call].The phone call is started.Using Voice Recognition functionYou can use Siri function of your iPhone or make a telephone call by using voice operation of your smartphone.You can use the Siri function of your iPhone. To use this function, set the Siri setting of your iPhone to ON.• Connect your iPhone to the unit via Bluetooth, then set to “Hands-free”or “Both” (page 30).• The available functions differ depending on the connected iPhone.• Ask Siri to play a track from the music library applies only to USBsource.• Siri and other streaming services are enabled by connecting to compatible smartphones that are able to receive data. Please ensure that cellular data and/or Wi-Fi is turned on in the smartphone to enjoy these features.• Extensive use of Siri or other streaming services may increase your phone’s data usage. Please check with your phone company to ensureyou have an appropriate Data plan.1Press and hold the (AUDIO) button for at least 2 seconds.The Voice Control mode screen is displayed.2Speak into the microphone supplied with this unit.• If no speech is detected, the unit may pause depending on versionof the connected iPhone. In that case, touch the microphone icon [ ] in the center of the Voice Control mode screen. You can continue to use the Voice Control mode.3To finish the Voice Control mode, touch [ ] or press andhold the (AUDIO) button for at least 2 seconds.• Depending on the iPhone, the Siri function may finish automatically.Adjusting the volumeAdjust the speaker/microphone volumes in Voice Control mode. Perform the same procedure to adjust the speaker/microphone volumes of hands-free phone.Touch [ ] or [ ].Adjust the speaker and microphone volumes.Stopping input to the microphoneIf the surrounding sound (road noise, etc.) is loud, you may wish to cut input to the microphone for 3 seconds.Touch [ ].You can make a telephone call by using voice operation.• Connect your smartphone to the unit via Bluetooth, then set to “Hands-free” or “Both” (page 30).1Press and hold the (AUDIO) button for at least 2 seconds.The Voice Dial mode screen is activated.2Say the telephone number* or name* you want to call, into the microphone.*The number and name depend on the voice dial information storedin the smartphone.3To finish the Voice Dial mode, touch [ ] or press andhold the (AUDIO) button for at least 2 seconds.• You can perform this operation only when a voice dial compatiblesmartphone is connected.• The Voice Dial function performance depends on the recognition range of the smartphone and mounting location of the microphone. Note when the microphone is mounted.• Voice dial operation depends on the function being available on the smartphone. For details, refer to the owner’s manual of the smartphone.• Depending on the smartphone, the Voice Dial operation may finishautomatically.Using SiriVoice Dial Function

83-ENAdjusting the volumeAdjust the speaker/microphone volume in Voice Dial mode. Perform the same procedure to adjust the speaker/microphone volume of hands-free phone.Touch [ ] or [ ].Adjust the speaker and microphone volumes.Stopping input to the microphoneIf the surrounding sound (road noise, etc.) is loud, you may wish to cut input to the microphone for 3 seconds.Touch [ ].Operations During a ConversationPhone Operation screenName and phone number• If registered with a Group, the Group Name is also displayed.Although, depending on the connected mobile phone, it may not be displayed.Conversation timeYou can adjust Caller Level and Mic. Level (Microphone Level) during a phone call.Touch [ ] or [ ].You can adjust the volume in 11 levels.The voice output for calls is switchable between car speakers and the mobile phone speaker.Touch [ ].• Depending on the mobile phone, this operation may not be possible.Transmits a DTMF (Touch-Tone) during a call.1Touch [ ] (Keypad).The number input screen (Keypad) appears.2Input number.• You can transmit a Touch-Tone signal during a call.Phone Book FunctionPhone Book screen exampleUse to search by directly inputting a name or phone number with the Keypad.For details, see “How to Input Characters and Numbers (Keypad)” (page 23).Displayed when multiple phone numbers are registered. Touch [ ] to display the registered phone number list.Use to narrow down your search for names, etc.For details, see “Alphabet Search Function” (page 59).Touch [ ] to register as Favorite.You can synchronize the system’s phone book with the mobile phone’s phone book.1Touch [ ] (Edit).2Touch [Download].3Touch [SYNC].Synchronization of the phone books starts.• You can store up to 1,000 registered name in the phone book.• You can store up to 5 phone numbers by one person’s name.1Touch [ ] (Edit).2Touch [Download].3Touch [Add].Stays on standby for connection of the mobile phone.• Touch [Cancel] to cancel the standby mode.4The mobile phone accesses this unit and then transfers the phone book from the mobile phone to this unit.• Mobile phone connection is canceled while the phone book is being transferred.Adjusting the Speech VolumeChanging the Voice OutputDTMF (Touch-Tone) FunctionSynchronizing the Phone BookAdding the Phone Book

84-ENDeleting One Entry from the Phone Book1Touch [ ] (Edit).2Touch the checkbox [ ] of the contact name (or phone number) you want to delete. A tick ( ) appears in the checkbox.• You can choose up to 10 names and numbers at a time.3Touch [ ] (Delete).The confirmation screen is displayed.If multiple phone numbers are registered, they are all deleted.4Touch [OK].The selected number is deleted.Deleting All Entries from the Phone Book1Touch [ ] (Edit).2Touch [ ] (Delete All).The confirmation screen is displayed.3Touch [OK].All entries of the phone book are deleted.You can make a call using the phone book search function.1Touch [ ] (Search).The Input User Name screen (Keypad) is displayed.2Input the string of letters of the name that you want to search, then touch [OK].A list of names beginning with the string of letters you entered is displayed.3Touch the name you want to call.The Phone Operation screen is displayed.4Touch [ ].The phone call is started.• For details of how to input characters using the keypad, see “How to Input Characters and Numbers (Keypad)” (page 23).• If there are fewer than five registered items in the phone book, you cannot use the phone book search function.If a Bluetooth compatible mobile phone, portable player, etc. is connected by wireless, you can play back a song (operation is controllable from the unit).• Operation may vary, depending on the Bluetooth compatible device.Bluetooth Audio main screen exampleFunction modeCurrent track no./Total song no.Artist titleSong titleAlbum titleElapsed timeTouch or swipe to the right to use the Quick Search mode and Full Search mode.Quick Search mode screen exampleSwipe vertically in the list to change pages.Full Search buttonSwipe to the right when using Full Search mode.• The displayed onscreen buttons may differ depending on the AVRCPversion.• Song title/Artist title/Album title/Elapsed time do not display forAVRCP Ver. 1.0.Deleting the Phone Book EntriesSearching in the Phone BookBluetooth Audio

86-ENConnecting a Bluetooth DeviceRegistering a Bluetooth device in the unit enables automatic connection.If it does not connect automatically, run through the connection procedure again.1Touch [ ] (Phone Setting).The Device Setting select pop up screen is displayed.2Touch [Reconnect].Bluetooth connection will start.1Touch [ ] (Phone Setting).The Device Setting select pop up screen is displayed.2Touch [Disconnect].The Bluetooth connection is disconnected.If multiple Bluetooth devices are registered in this device, you can change the connection among the registered devices.1Touch [ ] (Phone Setting).2Touch [Change Phone].3Touch [ ] (Audio) or [ ] (Hands-free) of the selected device.The connection will transfer to the selected device. Disconnecting the Bluetooth ConnectionChanging the connecting Bluetooth Device

87-ENOperating Auxiliary Devices (Optional)To operate devices connected to the AUX terminals of the unit, follow the procedure described below.• Set AUX to “On.” See “AUX Setup” (page 44).• Depending on the connected unit, the onscreen buttons may not work, or their operation may differ.• If you try to activate the auxiliary device while driving, the display willshow the warning-Picture off for your safety.Press the (AUDIO) button to select Auxiliary (AUX)* mode.The display shows the Auxiliary (AUX) mode screen.*The name which is given as the mode name in “Setting the Auxiliary(AUX) Name” (page 45) is displayed.• You can select and change the source in the Menu screen (page 21) orFavorite screen (page 24).• For details on the connected auxiliary device, refer to its owner’s manual.AUX Operation Screen Display During Video File PlaybackTouch the screen.The Auxiliary (AUX) operation screen is displayed.• The operation screen changes to the visual screen in the Auxiliary (AUX) mode for 5 seconds after an operation has been performed. To hide the Auxiliary (AUX) operation screen, touch the video display area.Example for AUX, AUX DVD, GAME, USB Player mode display[ ] (Display Mode)For details, see “Switching Display Modes (During Video File Play Back)” (page 60).External DVD player display example[ ]Touch the switch to go back to the beginning of the current chapter/track/file. Touch the switch once more to find the beginning of the previous chapter/track/file. Touch and hold to fast reverse.[ ]Touch the switch to advance to the beginning of the next chapter/track/file. Touch and hold to fast forward.[ / ]Switches between play and pause.[ ]Touching during play initiates a pre stop. Touching again stops play.[ ]Starts/Stop repeat play.[ ]Starts/Stop M.I.X. play.[ ] (Top Menu)Calls up the Top Menu screen.Auxiliary Device (Optional)WARNINGIt is dangerous (and illegal in many states) for the driver to watch TV/video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.Install the unit correctly so that the driver cannot watch TV/video unless the car is stopped and the parking brake is applied.If the unit is not installed correctly, the driver will be able to watch TV/video while driving and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured.Operating an AUX, AUX DVD, GAME or USB PlayerOperating an External DVD Player

88-EN[ ] (Menu)Calls up the Menu screen.[ ] (Menu Control)Calls up the menu operation mode.[ ]Switches the program/playlist/folder down.[ ]Switches the program/playlist/folder up.[ ] (Display Mode)You can set the Display Mode. For details, see “Switching Display Modes (During Video File Play Back)” (page 60).[ ] (Angle)Switches angle.[ ] (Audio)Switches audio.[ ] (Sub Title)Switches sub titles.Menu operation mode screen example[Key]Displays the Key panel ( ).[ ], [ ]Moves key panel location.[ ]Closes menu operation mode.[ ]Closes key panel.[ ], [ ], [ ], [ ]Moves menu cursor.[Enter]Determines the selected item.[Return]Returns to the previous item/screen.The DVD-CHG operation mode screen and the Menu operation mode screen are the same as the external DVD player operation screen. See “Operating an External DVD Player.”External DVD changer screen example[Disc1]-[Disc6]Selects a Disc.• Touch the left side of the operation screen or swipe the operation screen to the right to display the Disc selection screen.Menu operation mode screen example[ ]Switches the Channel number / Favorite channel number down.[ ]Switches the Channel number / Favorite channel number up.[ ] (Tune) (Channel or Favorite)Switches between the Channel mode and the Favorite channel mode.[ ] (EPG)Call up the Electronic Program Guide (EPG). [ ] (Menu)Call up the menu screen.[ ] (Menu Control)Call up the menu operation mode.[ ] (A/V)Switches the source.[ ] (Scan)Touch the switch to start the scan procedure.[ ] (Display Mode)You can set the Display Mode. For details, see “Switching Display Modes (During Video File Play Back)” (page 60).Operating an External DVD ChangerOperating the Mobile Digital TV Receiver (DVB-T)

89-ENMenu operation mode screen example[ ], [ ]Switches the Channel number / Preset channel down.[ ], [ ]Switches the Channel number / Preset channel up.[ ] (Band)Switches the band.[ ] (Tune) (Channel or Preset or Manual)Switches amongst Channel mode, Preset mode, and Manual mode. [ ] (Auto Memory)The tuner automatically seeks and stores stations.[ ] (Display Mode)You can set the Display Mode. For details, see “Switching Display Modes (During Video File Play Back)” (page 60).Operating a TV

90-ENWhen an optional camera is connected, the view video of camera can be output to the monitor.Front camera, Rear camera or Side camera can be connected to this unit.Make the Camera Select setting (Front, Rear, Side or Other) according to your connected camera. For details, see “Setting the Camera Input” (page @@).When using the optional Multi Camera Interface box, you can connect up to 3 cameras: Front Camera, Rear Camera, and Side Camera. When connecting the optional Multi Camera Interface box, you need to set each camera to On/Off in “Setting Multi Camera to On/Off ” (page @@).When displaying the camera view while connected to the optional Multi Camera Interface box, you can switch the camera view using the switch button at the top of the screen.Front camera:When the HCE-C257FD is connected, conditions in front of the vehicle, such as objects, people and other hazards, can be seen.Rear camera:If an HCE-C127D/HCE-C157D/HCE-C252RD camera is connected, when the vehicle is reversed, the rear camera view (guide marks for vehicle width and available distance) is displayed automatically on the screen of this unit.Side camera:If the HCE-C259SD is connected, you can check for obstacles in the blind spot on the passenger side.Other camera:Set when connecting to a camera other than the Front camera or Rear camera, such as a room camera and side camera.Rear Camera Operation1Press the MENU button.The menu screen is displayed.• You can also display the menu screen by touching [ ]on the lower part of the Audio source screen or by swiping upward.2Touch [Camera].The Rear Camera view is displayed.• Touch the screen while the camera image is being displayed, and touch [ ] or [ ] to return to the main source screen or previous screen.• You can perform a Guide Adjustment. For details, see “Adjusting the Rear/Front/Side Camera Guide” (page 46).• If you connect a Front Camera and Side Camera using the optionalMulti Camera Interface box, touch [Front] or [Side] to switch theCamera display.• You can also switch the Camera view by Pressing (CAMERA)button. (X110 only)1Shift the gear lever to the reverse (R) position.The rear view image is displayed while the car remains in reverse.2If you shift the gear lever to a position other than reverse (R), the monitor returns to the previous screen.• Never depend solely on the camera when backing up. Always turn and look and only use the camera for additional assistance.• This function is effective when the reverse wire is properly connected.• You can perform a Guide Adjustment. For details, see “Adjusting the Rear/Front/Side Camera Guide” (page 46).If the camera has a view switch function, the Direct Change switch is displayed.1Touch the screen when the image from the rear camera isdisplayed.The operation screen is displayed on the screen.• After a 5-second time-out, the operation screen returns to the camera display screen. 2Touch [Back], [Panorama], [Corner] or [Top]. The image pattern changes. • For detailed information about image patterns, see the camera Owner’s Manual. • You can perform a Guide Adjustment. For details, see “Adjusting the Rear/Front/Side Camera Guide” (page 46).1Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen.• After a 5-second time-out, the operation screen returns to the camera display screen.2Touch [Guide Off] or [Hitch Guide Off] on the Rear camera display screen.The guide disappears, and then the [Guide Off] or [Hitch Guide Off] switch changes to [Guide On] or [Hitch Guide On].3Touch [Guide On] or [Hitch Guide On] to turn on theguide.Camera Operation (Optional)You can adjust the quality of the camera image.Setting items: Brightness / Color / ContrastSee “Picture Quality. Setup” (page 39).Displaying the Rear Camera Image from the Menu screen[Camera] buttonDisplaying the rear view video while the car isin reverseSwitching the Image Pattern for the RearCamera[Back]: Rear View[Panorama]: Panorama View[Corner]: Corner View[Top]: Ground ViewGuide Display ON/OFF Setting

91-EN1Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen.• After a 5-second time-out, the operation screen returns to the camera display screen.2Touch [ Caution].• For each touch, the caution location moves to the top or bottom of the screen. About the Rear Camera GuideTo display the guide, set “Guide Display ON/OFF Setting” (page 90) to On. Also, to adjust the guide, see “Adjusting the Rear/Front/Side Camera Guide” (page 46). You can also turn off the guide in the Rear camera display screen.Indication mark meaningWhen the car is put into reverse gear, the monitor switches to the rear view camera image. Guides appear to help visualize the car’s width and distance from the rear bumper.Car width extension marks (red, yellow and green in order of distance)If properly calibrated, the marks indicate the car’s width. This helps guide the car’s path when backing up in a straight line.The marks represent the distance from the rear of the car (from the rear end of the bumper).• The marks do not move in synchronization with the steering wheel.• Set the marks to suit the car’s width.Distance guidance marksThe marks represent the distance from the rear of the car (from the rear end of the bumper).• The marks do not move in synchronization with the steering wheel.• We recommend that you measure the actual distance to the marks when parked on a level surface.• Depending on the condition of the car or road surface, the range of vision may vary.• The camera has a limited range of vision. Objects at extreme angles to the camera (e.g. under the bumper or at opposite ends of the bumper) may not be in the its field-of-vision.• The rear camera image may have a tint which is different from the actual surroundings.• Depending on the car, the guidance may deviate to the right or left. This is not a malfunction.Distance guidance markThe distance guides represent the ground level distance from the rear bumper. It is difficult to accurately estimate the distance to objects above ground level.In the following example, the distance to A is 0.5 m and the distance to B is 1 m.<Screen><Positions of A, B and C>In the screen, according to the distance guidance marks, the truck seems to be parked about 1 m away (at the position B). In actual fact, however, if you reversed to position A, you would collide with the truck.In the screen, positions A, B and C seem to be located in order of proximity. However, in actual fact, the position A and C are the same distance, and B is farther away than positions A and C.• The car width extension mark represents the distance to the road surface. The distance to an object on the road is not accurately represented by the guides.Error between the screen and the actual road surfaceIn the following conditions, errors are produced between the screen guidance and the actual road surface. (The illustrations represent a case when the camera is installed in the standard position.)When there is a steep upward slope behind the car (example)<Screen>Adjusting the Caution Display LocationCBA (about 0.5 m)about 1 mDistance guidance marks

92-EN<Situation of the car>The distance guidance mark represents the distance to a flat road surface. Therefore in the case of an upward slope behind the car, the distance guides are displayed closer to the rear bumper than the actual distance. For example, if there is an obstacle on the upward slope, it may appear farther away than its actual position.Also, an error may occur between the guidance and the actual path of the car on the road surface.When there is a steep downward slope behind the car (example)<Screen><Situation of the car>In the case of a downward slope behind the car, the distance guides are displayed farther from the rear bumper than the actual distance. If there is an obstacle on the downward slope, it seems closer than its actual position.Also, an error may occur between the guidance and the actual path of the car on the road surface.Front Camera Operation1Press the MENU button.The menu screen is displayed. • You can also display the menu screen by touching [ ]on the lower part of the Audio source screen or by swiping upward.2Touch [Camera].The Front Camera view is displayed.• Touch the screen while the camera image is being displayed, and touch [ ] or [ ] to return to the main source screen or previous screen.• You can perform a Guide Adjustment. For details, see “Adjusting the Rear/Front/Side Camera Guide” (page 46).• If you connect a Rear Camera and Side Camera using the optionalMulti Camera Interface box, touch [Rear] or [Side] to switch theCamera display.• You can also switch the Camera view by Pressing (CAMERA)button. (X110 only)If the camera has a view switch function, the Direct Change switch is displayed.1Touch the screen when the image from the front camera is displayed. The operation screen is displayed on the screen.• After a 5-second time-out, the operation screen returns to the camera display screen.2Touch [Panorama], [Corner] or [Top]. The image pattern changes. • For detailed information about image patterns, see the camera Owner’s Manual.• You can perform a Guide Adjustment. For details, see “Adjusting the Rear/Front/Side Camera Guide” (page 46).Actual distancesError ErrorError ErrorDisplaying the Front Camera image from the Menu screen.Switching the Image Pattern for the FrontCamera[Panorama]: Panorama View[Corner]: Corner View[Top]: Ground View[Camera] button

93-ENAs with the rear camera, the front camera guide display ON/OFF setting and Caution display location can be adjusted. See “Guide Display ON/OFF Setting” (page 90) and “Adjusting the Caution Display Location” (page 91) for the operations.Side Camera Operation1Press the MENU button.The menu screen is displayed.• You can also display the menu screen by touching [ ] on the lower part of the Audio source screen or by swiping upward.2Touch [Camera].The Side Camera view is displayed.• Touch the screen while the camera image is being displayed, and touch [ ] or [ ] to return to the main source screen or previous screen.• You can perform a Guide Adjustment. For details, see “Adjusting the Side Camera Guide” (page @@).• If you connect a Rear Camera and Front Camera using the optional Multi Camera Interface box, touch [Rear] or [Front] to switch theCamera display.• You can also switch the Camera view by Pressing (CAMERA)button. (X110 only)If the camera has a view switch function, the Direct Change switch is displayed.1Touch the screen when the image from the side camera is displayed.The operation screen is displayed on the screen.• After a 5-second time-out, the operation screen returns to the camera display screen.2Touch [Rear] or [Front].The image pattern changes.• For detailed information about image patterns, see the camera Owner’s Manual.• You can perform a Guide Adjustment. For details, see “Adjusting the Side Camera Guide” (page @@).About the adjustment of guide display ON/OFF setting and adjustment of Caution display location Displaying the Side Camera image from the Menu screen.[Camera] buttonSwitching the Image Pattern for the Side CameraRear: Vehicle Rear viewFront: Vehicle Front view

94-ENWhen the unit is connected to the car’s iDataLink module, you can transfer and receive data between the car and the unit to check the car’s status, or to make various operations from the unit.When you use iDataLink mode, set each setting other than “Aftermarket” in “Setting the Source Category” (page @@).• Available functions differ depending on your vehicle. For details, refer to your vehicle’s instruction manual.Access to iDataLink ModeYou can check the car’s status, set the air conditioning, etc.1Press and hold the ## (Favorite) button for at least 2 seconds, or touch [ ] (Vehicle Info.) in the Menu screen to activate iDataLink mode.• The iDataLink mode screen selected in “Setting the Default Vehicle Screen” (page @@) is displayed.2Touch the desired tag on the top of the screen.• The displayed tag options differ depending on the type of vehicle.Setting contents:Climate / Gauges / Park Sensor / Vehicle Info. / Car SettingClimate screen example3Adjust or confirm the item/information accordingly.• Operable functions and displays may differ depending on the vehicle.iDataLink Function Screen exampleClimate screen exampleYou can control the temperature inside the vehicle, etc.Gauges screen exampleYou can check the vehicle's speed, the engine's rotation speed, etc.Parking sensor screen exampleYou can check the distance from the front and rear of the vehicle to an obstacle.• If the car sensor detects an obstacle, the screen automatically changes to the Parking sensor screen. For details, see “About Parking Sensor screen” (page @@).Vehicle Information screen exampleYou can check for open doors, check the tire pressure, the battery life, etc. for the vehicle.Car Setting screen example (Generic List screen)The Generic List/Popup Window/Current source control screen is displayed.iDataLink Operation (Optional)

95-ENThe Parking sensor screen turns on when the front or rear sensor on your vehicle detects an obstacle within a certain distance.Parking Sensor Full screen exampleWhen the front or rear sensor detects an obstacle within a certain distance, the Parking Sensor screen is displayed, and the indicator ( - ) that corresponds with that area lights up.Indicator colors when an obstacle is detected.Red: close distanceOrange: medium distanceYellow: long distance• Depending on the speed of the vehicle, when moving faster than a certain speed, the Parking Sensor screen may not be displayed.• Vehicles that do not have the obstacle detection sensor cannot use this function.*[ ] is displayed only when the Front camera or Rear camera is interlocked.Parking Sensor Camera interlock screen example (Rear camera)You can check for obstacles through an interlocked camera image by connecting a Front or Rear Camera.• Touch the Camera image area to switch to the Camera full screen. (While displaying the Camera full screen, touch the Camera screen, then touch [Sensor] to return to the Parking Sensor Camera interlock screen.)• Touch the car icon to switch to the Parking sensor full screen. (Touch [ ] on the Parking Sensor full screen to return to the Parking Sensor Camera interlock display.)• To use this function, set the Camera Select setting to “Front/Other” or “Rear.” For details, see “Setting the Camera Input” (page 46).• If you connect a Front Camera/Rear Camera/Side Camera using the optional Multi Camera Interface box, you can switch the Camera display. For details on the camera settings when connected to the Multi Camera Interface box, see “Setting Multi Camera to On/Off” (page @@). For details on how to switch the camera display, see “Camera Operation (Optional)” (page @@).External Accessory Control OperationYou can set the headlights to ON/OFF or adjust the air suspension from this unit by connecting the optional External Accessory Control box.The following explains how to edit the control switches, because the functions that can be controlled differ depending on the type of vehicle.1Touch [ ] (Ext Acc Ctrl) in the Menu screen to activate External Accessory screen.The External Accessory screen is displayed.2Touch [ ] (Edit).The Edit Control Switches screen is displayed.About Parking Sensor screen

96-EN3Edit each switch.When changing an icon:Touch the icon, and select your desired icon from the Icon Type list. After selecting the icon, set the Output Type (Timing) for each function.*The Output Type (Timing) sets the operating time for that function when you touch the icon on the External Accessory screen.When changing the name:Touch the icon name, then input characters into Edit Name (Keypad). You can also select a basic name from the [Template] of the Keypad. For details on how to input characters using the keypad, see “How to Input Characters and Numbers (Keypad)” (page @@). (When a basic name is selected from the Template, the icon will be changed according to the basic name.)When changing the layout of the switches:Drag and drop an icon to the desired location.To revert to a default icon:Touch the check box “ ” of the icon that you want to revert to default, and then touch [ ] (Reset). If you touch [ ] (Reset All), all icons revert to default icons.4After editing is complete, touch [ ] (Back).5After the caption for the confirmation is displayed, touch [OK].• If you touch [ ] (Cancel) while editing, the screen switches to the Edit screen.Pulse: The operating time when you touch the icon. (Select from 11 steps, ranging 0.5 sec. to 10 sec.)Latch: Switch On/Off by touching the icon.Momentary: Operating time lasts from when an icon is touched to when it is released.

97-ENWhen Using the Remote Control• When you first use the remote control, please remove the insulation sheet in the battery case.• Point the remote control at the remote sensor within about 2 metres.• It may not be possible to operate the remote control if the remote control sensor is exposed to direct sunlight.• The remote control is a small, lightweight precision device. To avoid damage, short battery life, operational errors and poor response, observe the following. - Do not subject the remote control to excessive shock.- Do not put in a trouser pocket.- Keep away from food, moisture and dirt.- Do not place in direct sunshine.Battery ReplacementBattery type: CR2025 battery or equivalent.1Opening the battery caseSlide out the battery cover while firmly pressing in the direction of the arrow.2Replacing the batteryPut the battery in the case with the (+) indication upward as shown in the illustration.• Placing a battery in backwards way may cause a malfunction.3Closing the coverSlide the cover as illustrated until a click is heard.About Remote Control Operation (X110 with DVE-5300X only)WARNINGDO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

98-ENOperating the DVD Player buttonRecalls the Menu screen.DISP. buttonDisplays playback status on the screen.ENT. buttonDetermines the selected item.REPEAT buttonRepeats playback. buttonSelects MP3/WMA/AAC/WAV folders.AUDIO buttonVideo CD: Switches the audio output.DVD: Switches the audio language.SUBTITLE buttonSwitches the subtitle.CLR (ALL CLR) buttonRemoves numbers (one character at a time) that have been selected and input.Press and hold for 2 seconds. All the characters which were selected and input are erased.ANGLE buttonSwitches the angle (DVD only). buttonCD mode:Press the button to go back to the beginning of the current track. Press and hold to fast reverse.MP3/WMA/AAC/WAV mode:Press the button to go back to the beginning of the current file. Press and hold to fast reverse.DVD/Video CD mode:• Move to the desired position on the disc.• During playback, press and hold for more than 1 second to reverse the disc at double speed. Hold for more than 5 seconds to reverse the disc at 8 times the normal speed. Hold for more than 10 seconds to reverse the disc at 32 times the normal speed.• The picture is reversed by one frame each time the button is pressed in the pause mode (DVD only)./ buttonSwitches between play and pause.MENU buttonVideo CD: Switches between PBC ON and OFF.DVD: Displays the DVD menu.SETUP buttonDisplays the SETUP (initial setting) screen. buttonSelects MP3/WMA/AAC/WAV folders.RETURN buttonReturns to the selection screen just prior to the current screen., , , buttonsSelects the items displayed on the screen.M.I.X. buttonM.I.X. play for CDs and MP3/WMA/AAC/WAV.Numeric KeypadInputs numbers.LIST buttonMP3/WMA/AAC/WAV Folder and File Search. buttonCD mode:Press the button to advance to the beginning of the next track. Press and hold to fast forward.MP3/WMA/AAC/WAV mode:Press the button to advance to the beginning of the next file. Press and hold to fast forward.DVD/Video CD mode:• Move to the desired position on the disc.• During playback, press and hold for more than 1 second to forward the disc at double speed. Hold for more than 5 seconds to forward the disc at 8 times the normal speed. Hold for more than 10 seconds to forward the disc at 32 times the normal speed.• The picture is forwarded by one frame each time the button is pressed in the pause mode.TOP M. buttonDisplays the Top Menu. buttonStops the playback.

99-ENProduct Software UpdateThis product use software that can be updated through a USB flash drive. Download the software from the Alpine website and update the product using the USB flash drive.Updating this productCheck the Alpine website for details on updating. http://www.alpine-usa.comImportant information on the softwareAbout the software license of the productThe software installed in the product contains open-source software.See the following Alpine website for details on the open source software.http://www.alpine.com/e/oss/downloadCautions about Discs (X110 with DVE-5300X only)Moisture CondensationYou may notice the disc playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.Damaged DiscDo not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.Never Attempt the FollowingDo not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.Do not attempt to insert a disc into the unit when the unit power is off.Inserting DiscsYour player accepts only one disc at a time for playback. Do not attempt to load more than one disc.Make sure the label side is facing up when you insert the disc. “Disc error” will be displayed on your player if you insert a disc incorrectly. If “Disc error” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen.Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.Irregular Shaped DiscsBe sure to use round shaped discs only for this unit and never use any special shaped discs. Use of special shaped discs may cause damage to the mechanism.New DiscsTo prevent the disc from jamming, “Disc error” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the center hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.Installation LocationMake sure the unit will not be installed in a location subjected to:• Direct sun and heat• High humidity and water• Excessive dust• Excessive vibrationsCorrect HandlingDo not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.Disc CleaningFingerprints, dust, or soil on the surface of the disc could cause the DVD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.InformationCenter HoleBumpsCenter HoleNew DiscOutside (Bumps)CORRECTINCORRECTCORRECT

101-ENUsing DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs• This unit is compatible with discs recorded in the standard DVD-Video format.• Note that discs not finalized (processed to enable to play on playback-only DVD players) cannot be played on this DVD player.• Some discs may not play back, depending on the recording device and disc format.• Discs or files utilising copy protection, may not be playable. Some recording systems may not properly format copied files to enable proper playback.• In the following cases, the disc may not play on this unit: discs recorded by certain DVD recorders, certain irregular discs, flawed discs, dirty discs, when the pickup lens of this DVD player is dirty, or when moisture condensation has occurred inside the unit.• Be sure to follow all cautions included with your DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs discs.• Do not put stickers, seals, or tape on the label side of DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs.• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs are more affected by heat, moisture, and direct sunlight. If left in a car, etc., damage may occur and it might not play on this unit.• The operable temperature range for disc playback is as follows:DVD-R/DVD-RW: 25 to +70°CDVD+R/DVD+RW: +5 to +55°CAbout the Supported Formats What is MP3?MP3, whose official name is “MPEG Audio Layer 3,” is a compression standard prescribed by the ISO, the International Standardisation Organisation and MPEG which is a joint activity institution of the IEC.MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.What is WMA?WMA, or “Windows Media™ Audio,” is compressed audio data.WMA is similar to MP3 audio data.What is AAC?AAC is the abbreviation for “Advanced Audio Coding,” and is a basic format of audio compression used by MPEG2 or MPEG4.What is FLAC?FLAC (Free Lossless Audio Codec) is an audio file codec for lossless compression, developed and offered as open source software. Codecs with lossy compression forms, such as MP3 and AAC, reduce part of the data to improve compression efficiency. However, FLAC can reconstruct compressed data to be an identical copy of the original data by performing lossless compression. The compression ratio of FLAC is about 50%.Method for creating MP3/WMA/AAC/FLAC (USB Flash drive) filesAudio data is compressed using software with MP3/WMA/AAC/FLAC (USB Flash drive) codecs. For details on creating MP3/WMA/AAC/FLAC (USB Flash drive) files, refer to the user’s manual for that software.MP3/WMA/AAC/FLAC (USB Flash drive) files that are playable on this device have the file extensions.MP3: “mp3”WMA: “wma”AAC: “m4a”FLAC: ”flac”/”fla”WMA is not supported for the following files, Windows Media Audio Professional, Windows Media Audio 10 std or Windows Media Audio 10 Pro Lossless.There are many different versions of the AAC format. Confirm that the software being used conforms to the acceptable formats listed above. It’s possible that the format may be unplayable even though the extension is valid. Playback of AAC files encoded by iTunes is supported.Supported playback sampling rates and bit ratesMP3 (USB Flash drive/Disc)WMA (USB Flash drive/Disc)AAC (USB Flash drive/Disc)FLAC (USB Flash drive)This device may not play back correctly depending on sampling rates.On handling compact discs (CD/CD-R/CD-RW)• Do not touch the surface.• Do not expose the disc to direct sunlight.• Do not affix stickers or labels.• Clean the disc when it is dusty.• Make sure that the disc is smooth and flat.• Do not use commercially available disc accessories.Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight.Heat and humidity may damage the disc and you may not be able to play it again.About MP3/WMA/AAC/FLACCAUTIONExcept for private use, duplicating audio data (including MP3/WMA/AAC/FLAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHzBit rates: 8 - 320 kbpsSampling rates: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz, 16 kHz, 11.025 kHz, 8 kHzBit rates: 48 - 320 kbpsSampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHzBit rates: 16 - 320 kbpsSampling rates: 96kHz, 88.2kHz, 48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz, 8kHzChannel number: 1ch, 2ch

102-ENID3 tags/WMA tagsThis device supports ID3 tag v1.0, v1.1, v2.2, v2.3, v2.4, and WMA tag Ver.1.x. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data.For non-supported characters, “?” is displayed.The number of characters may be limited, or not correctly displayed, depending on the tag information.Playing back MP3/WMA/AAC/FLACMP3/WMA/AAC files are prepared, then written to a USB flash drive.• Maximum numbers of playable files/foldersUSB Flash drive: 10,000 files/folders (including Root Folder)• Largest playable file size: 512 MBPlayback may not be performed if a disc exceeds the limitations described above.If a file/folder name is long, the maximum possible number of files may decrease.• Both Audio and Video files are counted if their formats are playable on this unit.Media supportedThe media that this device can play back a USB flash drive.Corresponding File SystemsThis device supports FAT 16/32.Order of filesFiles are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what’s expected. Verity the writing order in the software’s documentation. The playback order of the folders and files is as follows. (The following numbers may differ from actually displayed numbers.)TerminologyBit rateThis is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files.Sampling rateThis value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data.EncodingConverting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format.TagSong information such as track titles, artist names, album names, etc., written into MP3/WMA/AAC/FLAC (USB flash drive) files.Root folderThe root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs.WAV, whose official name is “WAVE FORMAT” is a standard format of Windows® audio file.Extension: “.wav”Sampling rate: 44.1 kHzQuantization bit number: 16Channel number: up to 2chFormat: PCM onlyThe maximum nested folder depth is 8 (including the root directory). File names are limited to 256 characters (including the extension).Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and ‘_’ (underscore).RootFolderFolder MP3/WMA/AAC/FLAC/WAV FileAbout WAV (Disc)

103-ENMusic CDs and DVDs have grooves (tracks) in which the digital data is recorded. The data is represented as microscopic pits recorded into the track – these pits are read by a laser beam to play the disc. On DVDs, the density of the tracks and pits is twice that of CDs, so DVDs can contain more data in less space.A 12 cm disc can contain one movie or about four hours of music. In addition, DVDs provide sharp picture quality with vivid colors thanks to a horizontal resolution of over 500 lines (compared to less than 300 for VHS tape).In addition, DVDs offer a variety of functions.Multiple audio* (page 77)Movies can be recorded in up to eight languages. The desired language can be selected from the unit.Subtitles function* (page 77)Movies can include subtitles in up to 32 languages. The desired subtitle language can be selected from the unit.Multi angle function* (page 77)When the DVD contains a movie shot from multiple angles, the desired angle can be selected from the unit.Multi story function*With this function, a single movie includes various story lines. You can select different story lines to view various versions of the same movie.Operation differs from disc to disc. Story line selection screens including instructions appear during the movie. Just follow the instructions.*These functions differ from disc to disc. For details, refer to the disc’s instructions.About DVDsCDsMinimum pit length - 0.9 µm 1.2 mm Track pitch - 1.6 µmDVDsMinimum pit length - 0.9 µm0.6 mm Track pitch - 0.74 µm0.6 mm

104-ENList of Language Codes(For details, see page 70.)

105-ENIn Case of DifficultyBasicNo function or display.• Vehicle’s ignition is off.- If connected according to the instructions, the unit will not operate with the vehicle’s ignition off.• Improper power lead connections.- Check power lead connections.• Blown fuse.- Check the fuse on the battery lead of the unit; replace with the proper value if necessary.• Internal micro-computer malfunctioned due to interference noise, etc.- Press the RESET switch with a ballpoint pen or other pointed article.No sound or unnatural sound.• Incorrect setting of volume/balance/fader controls.- Readjust the controls.• Connections are not properly or securely made.- Check the connections and firmly connect.Screen not displayed.• Brightness/Contrast control is set at the minimum position.- Adjust the Brightness/Contrast control.• Temperature in the vehicle is too low.- Increase the vehicle’s interior temperature to operation temperature range.• Connections to the Auxiliary Device are not securely made.- Check the connections and firmly connect.• The Parking Brake Lead is not connected.• The Parking Brake is not engaged.- Connect the Parking Brake Lead, then engage the Parking Brake.Movement of displayed picture is abnormal.• Temperature in the vehicle is too high.- Allow the vehicle’s interior temperature to cool.The optional remote control is inoperative.• The remote control sensor setting of “Remote Sensor Setting” (page 49) is not set to this unit (“Front”).- Set for “Front”.RadioUnable to receive stations.• No antenna, or open connection in the antenna cable.- Make sure the antenna is properly connected; replace the antenna or cable if necessary.Unable to tune stations in the seek mode.• You are in a weak signal area.- Make sure the tuner is in DX mode.• If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.- Check your antenna connections; make sure the antenna is properly grounded at its mounting location.• The antenna may not be the proper length.- Make sure the antenna is fully extended; if broken, replace the antenna with a new one.Broadcast is noisy.• The antenna is not the proper length.- Extend the antenna fully; replace it if it is broken.• The antenna is poorly grounded.- Make sure the antenna is grounded properly at its mounting location.• The station signal is weak and noisy.- If above solution does not work, tune in another station.USB AudioUnit does not operate.• Condensation.- Wait a while (about 1 hour) for the condensation to dry.Picture is unclear or noisy.• Vehicle’s battery power is weak.- Check the battery power and wiring.(The unit may malfunction if the battery power is under 11 volts with a load applied.)Rear Seat Entertainment SystemDVD sound is not being output from the rear monitor headphones.• The external audio processor and DVD Player (DVE-5300) are optically connected.- Set the Audio Out of the DVD Player to “LPCM.”DiscDisc playback sound is wavering.• Moisture condensation in the disc module.- Allow enough time for the condensation to evaporate (about 1 hour).Disc insertion not possible.• A disc is already in this unit.- Eject the disc and remove it.• The disc is being improperly inserted.- Insert the disc correctly. (See page 69)Unable to fast forward or backward the disc.• The disc has been damaged.- Eject the disc and discard it; using a damaged disc in your unit can cause damage to the mechanism.If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer.

106-ENDisc playback sound skips due to vibration.• Improper mounting of the unit.- Securely re-mount the unit.• Disc is very dirty.- Clean the disc.• Disc has scratches.- Change the disc.• The pick-up lens is dirty.- Do not use a commercially available lens cleaner disc. Consult your nearest Alpine dealer.Disc playback sound skips without vibration.• Dirty or scratched disc.- Clean the disc; a damaged disc should be replaced.CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW playback not possible.• Close session (finalization) has not been performed.- Perform finalization and attempt playback again.Error displays.• Mechanical error.- Press . After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer.MP3/WMA/AAC is not played back.• Writing error occurred. The CD format is not compatible.- Make sure the CD has been written in a supported format. Refer to “About MP3/WMA/AAC” (pages 101 to 102), then rewrite in the format supported by this device.Unit does not operate.• Condensation.- Wait a while (about 1 hour) for the condensation to dry.Playback does not start.• Disc is loaded upside-down.- Check the disc and load it with the labelled side facing upward.• Disc is dirty.- Clean the disc.• A disc not able to play back with this unit is loaded.- Check if the disc is able to be played back.• Parental lock is set.- Cancel the parental lock or change the rating level.Picture is unclear or noisy.• Disc is being fast-forwarded or fast-reversed.- The picture may be slightly disturbed, but this is normal.• Vehicle’s battery power is weak.- Check the battery power and wiring.(The unit may malfunction if the battery power is under 11 volts with a load applied.)Image stops sometimes.• Disc is scratched.- Replaced with a non-scratched disc.NavigationThe Navigation cannot work properly.• Reset Navigation system.- Reinsert the SD card and turn the ignition key off, and then set to ON again.If this Message AppearsVarious messages are displayed on the screen during operation. In addition to the messages telling you the current status or providing guidance for the next operation, there are also the following error messages. If one of these error messages is displayed, carefully follow the instructions in the solution column.SystemIf you are driving, please pull over before using this function.• A setup operation, etc., was carried out while the vehicle was running.- Move the vehicle to a safe location, stop, and engage the parking brake, then carry out this operation.USB current error.• Abnormal current is run to the USB connector device.- Turn the ignition key off, and then set to ON again.- Attempt to connect another iPod/iPhone/USB Flash drive.USB HUB is not supported.• A USB flash drive with a hub is connected.- You cannot play back from a USB flash drive with a hub. USB hub connections are also not supported.Audio/VisualConnected USB device is not supported.• An iPod/iPhone that is not supported by the unit is connected.- Connect an iPod/iPhone that is supported by the unit.- Reset the iPod.• A USB device that is not supported by the unit is connected.- Attempt to connect another USB flash drive.• Communication error.- Turn the ignition key off, and then set to ON again.- Check the display by reconnecting between the iPod/iPhone and the unit, using the iPod/iPhone cable.- Check the display by reconnecting between the USB flash drive and the unit.• Caused by the iPod/iPhone Software Version not being compatible with this unit.- Update the iPod/iPhone Software Version to be compatible with this unit.• The iPod/iPhone is not verified.- Change to another iPod/iPhone.No data.• There are no data in the iPod/iPhone.- Download data to the iPod/iPhone and connect to the unit.• There are no data in the USB flash drive.- Download data to the USB flash drive and connect to this unit.Un-readable song was skipped.• A copy-protected WMA file has been detected.- You can only play back non-copy-protected files.• A sampling rate/bit rate not supported by the unit is used.- Use a sampling rate/bit rate supported by the unit.

107-ENBluetoothPlease connect Bluetooth audio device.• The Bluetooth audio device was not connected correctly.- Check the settings for the unit and the Bluetooth audio device and reconnect.Unable to download phonebook.• Phonebook failed to read due to mobile phone disconnection, etc. - Check the mobile phone connection, and then conduct synchronizing and adding again. (See page 83)• The connected mobile phone does not support synchronizing of its phone book.- Connect the mobile phone that supports synchronizing the phone book, then synchronize again. (See page 83)HDMIHDMI communication error,Please check your device and operate it again.• Communication error.- Turn the ignition key off, and then set to ON again.- Check the display by reconnecting between the HDMI and the unit, using the HDMI cable.- Check the display by reconnecting between the HDMI device and the unit.HDMI current error, Please Connect your device again.• Abnormal current is run to the HDMI connector device.- Turn the ignition key off, and then set to ON again.- Disconnect the HDMI device from the unit, and then reconnect it.HDMI monitor communication error. Please check the connection or ACC off / on.• HDMI device communication error.- Turn the engine (ACC) OFF/ON. Or, check the HDMI cable where it connects to the HDMI monitor.Monitor connect via HDMI has been exceeded.Please check the connection.• More than 4 HDMI monitors are connected.• A cascade connection using more than 2 distributors is made.- Use one distributor and less than 4 HDMI monitors when connecting.iDataLinkCAN Communication error• Communication error.- Check the iDataLink module connection.SiriusXMCheck Tuner• The SiriusXM Tuner is disconnected or the unit is having trouble communicating with the Tuner.- Connect the Tuner or check the Tuner connection to the back of the unit.Check Antenna• The SiriusXM Satellite Radio antenna or cable is either damaged or not connected correctly to the SiriusXM Tuner.- Check that the SiriusXM antenna cable is connected to the SiriusXM Tuner and check that the antenna cable is not kinked or otherwise damaged. Replace the antenna if necessary.No Signal• The SiriusXM satellite signal is too weak at the current location.- Move the vehicle to a location with a clear view of the southern sky.- Make sure the Satellite Radio antenna is properly mounted and not obstructed by metal objects.Channel <xxx> Not SubscribedCall SiriusXM To Subscribe• The active channel has become unsubscribed or the requested channel is not available in your subscription package.- Visit www.siriusxm.com for information on subscribing to this channel.- The unit will revert to the previous selected channel or to channel 1 automatically.Channel <xxx> Not Available• The active channel is no longer in the SiriusXM channel lineup or the user has entered an invalid channel number.- Visit www.siriusxm.com for information on the current channel lineup.• The unit will revert to the previous channel or to channel 1 automatically.Subscription UpdatedPress OK to Continue• Your subscription has been updated.- Touch [OK] to clear this message.Channel <xxx> Locked• A locked channel is selected.- Input the passcode on the number keypad screen, see “Parental Lock Function” (page @@). If wrong passcode is input, “Incorrect Pass Code entered” will be displayed and the unit will revert to the previous channel.Updating · · ·• The Featured Favorites channels are during updating.Updating Teams, please wait• While the Game table is during updating, the [Game Alert Setup] button in SiriusXM setup mode is touched.Replay Memory Full• Buffer for Replay is full.Replay Memory Near Full• Buffer for Replay will full within 11 seconds.

108-ENX110 with DVE-5300XDISC ERROR• Mechanism error.1) Press and eject the disc.If the disc does not eject, press again for at least 3 seconds and eject the disc.If the disc still does not eject, consult your Alpine dealer.2) When the error indication remains after ejecting, press again.If the error indication still does not turn off after pressing a few times, consult your Alpine dealer.LO-TEMP• The temperature in the car is too low.- Raise the temperature in the car to normal temperature.NO DISC• No disc is inserted.- Insert a disc.• Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.- Remove the disc by pressing again for at least 3 seconds.REGIONAL CODE VIOLATION• Disc does not match regional code number.- Load a disc that matches the regional code number.HI-TEMP• Protective circuit is activated at high temperature.- The indicator will disappear when the temperature returns to within operation range.- Leave the power OFF until the temperature decreases and then turn the power ON again.LOADING ERROREJECT ERROR• Mechanism error.1) Press and eject the disc.If the disc does not eject, press c again for at least 3 seconds and eject the disc.If the disc still does not eject, consult your Alpine dealer.2) When the error indication remains after ejecting, press again.If the error indication still does not turn off after pressing a few times, consult your Alpine dealer.PROTECTED• A copy-protected WMA file was played back.- You can only play back non-copy-protected files.UNSUPPORTED• A sampling rate/bit rate not supported by the unit is used.- Use a sampling rate/bit rate that is supported by the unit.ILLEGAL FORMAT• A disc with an unsupported region code or other copyright infringement has been inserted.- Change to another disc.READ ERROR• The unit cannot read a disc's TOC because the disc has many scratches or is very dirty. - Clean the dirty disc, and insert it again. Damaged discs should be replaced.NavigationThe vehicle’s position is erroneous.• The GPS reception is poor.- Drive the vehicle in an area of good GPS reception to allow the unit to recalibrate itself. Move to a location where strong GPS reception is possible.No operation• Moisture condensation- Allow enough time for the condensation to evaporate (about 1 hour).• Ambient Temperature- Make sure the temperature inside the vehicle is between 0°C and 45°C (32°F and 113°F).

110-ENCD/DVD SECTIONPICKUPREMOTE CONTROLEND USER LICENSE AGREEMENT (HERE)In using this Navigation System (hereinafter referred to as “System”), which includes Alpine Electronics, Inc. (“Alpine”) Specifications, Space Machine, Inc. (“Space Machine”) Software and HERE North America, LLC. (“HERE”) Database, you are bound by the terms and conditions set forth below. By breaking the seal on the System and using your copy of the System, you have demonstrated your agreement to the terms and conditions of this Agreement. You should, therefore, make sure that you read and understand the following provisions.The System may not be copied, duplicated or otherwise modified, in whole or in part, without the express written permission of Alpine, Space Machine and HERE.The System may not be transferred or sublicensed to any third party for profit, rent or loan or licensed for reuse in any manner.The System may not be decompiled, reverse engineered or otherwise disassembled, in whole or in part.The System may not be used in a network or by any other manner of simultaneous use in multiple systems.The System is intended solely for personal use (or internal use where the end-user is a business) by the consumer.The System is not to be used for commercial purposes.Neither Alpine, Space Machine nor HERE guarantees to the customer that the System meet the specific objectives of the user.Neither Alpine, Space Machine nor HERE shall be responsible for any damages caused by the use of the System to the actual user and to any third party.The warranty on the System shall not extend to an exchange or refund due to misspelling, omission of letters, or any other cosmetic discrepancy in layout found in the System.The right to use the System shall expire either when the user destroys this software, or when any of the terms for use is violated and Alpine, Space Machine and/or HERE exercise the option to revoke the license to use this software.The terms and conditions hereof apply to all subsequent users and owner’s as well as to the original purchaser.The HERE Database may include or reflect data of licensors, including Her Majesty The Queen in right of CANADA. Such data is licensed on an “AS IS” basis. The licensors, including Her Majesty The Queen, make no guarantees, representations or warranties respecting such data, either express or implied, arising by law or otherwise, accuracy or fitness for a particular purpose.The licensors, including Her Majesty The Queen, shall not be liable in respect of any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of the data or the HERE database. The licensors, including Her Majesty The Queen, shall not be liable in any way for loss of revenues or contracts, or any other consequential loss of any kind resulting from any defect in the data or the HERE database.End User shall indemnify and save harmless the licensors, including Her Majesty The Queen and the minister, and their officers, employees and agents from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expenses, damages or injuries (including injuries resulting in death) arising out of the use or possession of the data or the HERE database.X110 with DVE-5300XFrequency Response CD: 5 – 20,000 Hz (± 1 dB)Wow & Flutter (% WRMS) Below measurable limitsTotal Harmonic Distortion 0.02 % (at 1 kHz)Dynamic Range 95 dB (at 1 kHz)Channel Separation 65 dB (at 1 kHz)Horizontal resolution 500 lines or greaterVideo output level 1Vp-p (75 ohms)Video S/N ratio DVD: 60 dBAudio S/N ratio 95 dBWave length DVD: 665 nmCD: 800 nmLaser power CLASS IIBattery Type CR2025 batteryWidth 42 mm (1-11/16”)Height 90 mm (3-5/8”)Depth 11.6 mm (15/32”)Weight 50 g (2 oz) (battery excluded)CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM(Bottom side of player)

LIMITED WARRANTYALPINE ELECTRONICS OF AMERICA, INC. (“Alpine”), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.PRODUCTS COVERED:This Warranty covers Car Audio Products and Related Accessories (“the product”). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A. are covered only in the U.S.A.LENGTH OF WARRANTY:This Warranty is in effect for one year from the date of the first consumer purchase.WHO IS COVERED:This Warranty only covers the original purchaser of the product, who must reside in the United States, Puerto Rico or Canada.WHAT IS COVERED:This Warranty covers defects in materials or workmanship (parts and labor) in the product.WHAT IS NOT COVERED:This Warranty does not cover the following:Damage occurring during shipment of the product to Alpine for repair (claims must be presented to the carrier).Damage caused by accident or abuse, including burned voice coils caused by over-driving the speaker (amplifier level is turned up and driven into distortion or clipping). Speaker mechanical failure (e.g. punctures, tears or rips). Cracked or damaged LCD panels. Dropped or damaged hard drives.Damage caused by negligence, misuse, improper operation or failure to follow instructions contained in the Owner’s manual.Damage caused by act of God, including without limitation, earthquake, fire, flood, storms or other acts of nature.Any cost or expense related to the removal or reinstallation of the product.Service performed by an unauthorized person, company or association.Any product which has the serial number defaced, altered or removed.Any product which has been adjusted, altered or modified without Alpine’s consent.Any product not distributed by Alpine within the United States, Puerto Rico or Canada.Any product not purchased from an Authorized Alpine Dealer.HOW TO OBTAIN WARRANTY SERVICE:You are responsible for delivery of the product to an Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or Alpine, Alpine will pay the return shipping charges.You should provide a detailed description of the problem(s) for which service is required.You must supply proof of your purchase of the product.You must package the product securely to avoid damage during shipment. To prevent lost packages it is recommended to use a carrier that provides a tracking service.HOW WE LIMIT IMPLIED WARRANTIES:ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT.HOW WE EXCLUDE CERTAIN DAMAGES:ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM “INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE AND CUSTODY OF THE PRODUCT. THE TERM “CONSEQUENTIAL DAMAGES” REFERS TO THE COST OF REPAIRING OR REPLACING OTHER PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY:This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. In addition, some states/provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.IN CANADA ONLY:This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized Installation Center, and this warranty stamped upon installation by the installation center.HOW TO CONTACT CUSTOMER SERVICE:Should the product require service, please call the following number for your nearest Authorized Alpine Service Center.Or visit our website at; http://www.alpine-usa.comCAR AUDIO 1-800-ALPINE-1 (1-800-257-4631)NAVIGATION 1-888-NAV-HELP (1-888-628-4357)ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.Do not send products to this address.Call the toll free telephone number or visit the website to locate a service center.

About the Rules of Bluetooth Electromagnetic Radiation RegulationUSA/CanadaFCC CAUTIONChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition dans le Supplément C à OET65 et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée. Cependant, cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et chevilles).Don’t forget to take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration.N’oubliez pas de consacrer un moment à la protection de votre achat en enregistrant votre produit dès maintenant à l’adresse suivante : www.alpine-usa.com/registration.Recuerde que con solo unos pocos pasos podrá proteger su producto, registrándolo a través de la siguiente dirección: www.alpine-usa.com/registration.USA/CanadaChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person's body. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet équipement est conforme aux limites d'exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d'exposition aux fréquences radioélectriques (RF) CNR-102 del'IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l'exposition maximale autorisée (MPE). Cependant, il est souhaitable qu'il devrait être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Navigation menu