ADTRAN SR900 802.11ac Gigabit Router User Manual SR400ac Gateway Quick Start Guide
SmartRG, Inc. 802.11ac Gigabit Router SR400ac Gateway Quick Start Guide
ADTRAN >
Contents
- 1. User manual SR905ac
- 2. User manual SR905acv
User manual SR905ac
![Lorem ipsumLorem ipsLorem ipsLorem ipsLorem ipsumumumumQuick Start GuideSR905acThis Quick Start Guide shows you how to set up and start using your new gateway.](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-1.png)
![Installation1. Connect one end of an Ethernet cable to the WAN port on the gateway and connect the other end of the cableto the wall jack installed by your provider.2. Connect a LAN port on the gateway to your PC using an Ethernet cable.3. Plug the power adapter to the wall outlet and then connect the other end of it to the Power port of thegateway.4. Turn on the unit by pressing the Power button on the side of the gateway.Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes tocomplete.If you are unable to connect to the Internet, make sure that all cable connections are in place and the gateway’spower is turned on.](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-2.png)
![3](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-3.png)
![LED IndicatorsThe LEDs on the top of the SR905ac can assist youin better understanding the current state of your gateway.Legend: White White blinking Green Green blinking RedLED Action ExplanationPower Device in CFE modeDevice powered on and ready for useInternet Gateway onlineData being transferredInternet authentication / connection has failed1-4 LAN Ethernet connected (at 1000 BASE-T)Data being transferred (at 1000 BASE-T)](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-4.png)
![LED Action ExplanationWAN Device online (at 1000 BASE-T)Device online (at 10/100 BASE-T)Network activityWAN Ethernet connected (at 1000 BASE-T)Data being transferred (at 1000 BASE-T)WAN Ethernet connected (at 10/100BASE-T)Data being transferred (at 10/100BASE-T)2.4 GHZ5 GHZWiFi enabledData being transferredLocked WiFi(WPS)WPS enabledData being transferredSS USB 1 & 2 USB device connectedData being transferred5](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-5.png)
![Quick Gateway ConfigurationLogging in to your gatewayTo change the settings on your gateway, you must log into the gateway's interface. Make sure that you have completedthe steps in "Installation" before you begin.1. Open your Internet browser and type 192.168.1.1 into the address line. The Login dialog box appears.2. Enter the credentials shown below and click LOGIN. Your service provider may use other settings. If so, contactyour provider for details.User Name: admin Password: admin](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-6.png)
![Configuring the WAN manuallyIf the automatic connect process is unsuccessful, refer to the "WAN Configuration" section of the SmartRG SR905acGateway User Manual to manually establish a connection.7](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-7.png)
![Wi-Fi Setup1. In the left menu, click WiFi >Networks >Status. The following page appears, showing information for theprimary network. The dual-band option is enabled by default.2. Accept the default ID shown in the SSID field or enter the SSID for the network that you want to configure. Youwill need this ID for Step 8.3. Choose a passphrase and type it in to the Password field. You will need this passphrase for Step 8.4. Select the desired Encryption. Make sure that the host devices you intend to use support the selectedauthentication type. The default encryption method works for most environments.5. If you do not want this SSID visible to other users, click the white circle next to Broadcast SSID to disable it.6. Click APPLY.](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-8.png)
![7. To enable a guest wi-fi network:a. Click the GUEST tab.b. Click the white circle next to Enabled.c. Fill in the fields following the instructions in Steps 2-6.d. Click APPLY.8. Follow the WiFi connection instructions provided with your client device to connect to the gateway. Usethe SSID name you selected in Step 2. Then enter the passphrase that you created in Step 3 in theappropriate location on the network setup screen of your WiFi client device.9](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-9.png)
![Optional Wall MountUsing a Phillips-head screwdriver, remove the mountfrom the bottom of the gateway.Insert the mount into the back of the gateway andtighten the screw located in the bottom of the mount.Using the template below, attach the two includedscrews to the wall. Using wall anchors isrecommended.Slide the mount down on to the screws.4 1/8” (104mm)GatewayFront1/16” (2-3mm) Wall Anchor](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-10.png)
![Record Your SR905ac Wi-Fi SettingsPredefined wireless settings If you change the preset wirelesssettingsPrimary WiFi network name (SSID)Primary Network key (password)Guest WiFi network name (SSID)Guest Network key (password)Additional SupportIf you require further instructions, please contact your local ISP Support.SmartRG Inc. All Rights Reserved. © 2018 11](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-11.png)
![Appendix: Compliance StatementsFCC - Part 68This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom caseof this equipment is a label that contains, among other information, a product identifier in the format US:VW7DL01BSR555AVW7DL01BSR655A. This indicates a REN (Ringer Equivalency Value) of 0.18.This equipment uses the following USOC jacks: RJ-11/RJ45/USB/Power Jacks.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with theapplicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug isprovided with this product. It is designed to be connected to a compatible modular jack that is also compliant. Seeinstallation instructions for details.Ringer Equivalency Number StatementREN=0.18The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to atelephone interface. The termination of an interface may consist of any combination of devices subject only to therequirement that the sum of the RENs of all the devices not exceed five.L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordésà une interface téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque dedispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous les dispositifs n'excède pas5.](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-12.png)
![Notice: The Ringer Equivalency Number (REN) assigned to each terminal device provides an indication of themaximum number of terminals allowed to be connected to a telephone interface. The termination on an interfacemay consist of any combination of devices subject only to the requirement that the sum of the Ringer EquivalenceNumbers of all the devices does not exceed 5.If this equipment causes harm to the telephone network, the telephone company will notify you in advance thattemporary discontinuance of service may be required. But if advance notice isn't practical, the telephone companywill notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC ifyou believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affectthe operation of the equipment. If this happens the telephone company will provide advance notice in order foryou to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact SmartRG,Inc. Ifthe equipment is causing harm to the telephone network, the telephone company may request that youdisconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, publicservice commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of thisdevice does not disable your alarm equipment. If you have questions about what will disable alarm equipment,consult your telephone company or a qualified installer.13](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-13.png)
![IC CS-03 statementThis product meets the applicable Industry Canada technical specifications.Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada.The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to atelephone interface. The termination of an interface may consist of any combination of devices subject only to therequirement that the sum of the RENs of all the devices not exceed five. / L’indice d’équivalence de la sonnerie (IES)sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. Laterminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que lasomme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas cinq.FCC - Part 15This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:lReorient or relocate the receiving antenna.lIncrease the separation between the equipment and receiver.lConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.lConsult the dealer or an experienced radio/TV technician for help.](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-14.png)
![FCC Radiation Exposure StatementThis device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it alsocomplies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance withprovided instructions and the antenna(s) used for this transmitter must be installed to provide a separationdistance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any otherantenna or transmitter. End-users and installers must be provide with antenna installation instructions andconsider removing the no-collocation statement.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.Caution!Any changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment.Canada StatementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the followingtwo conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)15](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-15.png)
![l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement.The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité àl'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Thisequipment should be installed and operated with a minimum distance of 20 centimeters between the radiator andyour body.Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur.Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur etvotre corps.This radio transmitter (identify the device by certification number, or model number if Category II) has been approvedby Industry Canada to operate with the antenna types listed below with the maximum permissible gain and requiredantenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater thanthe maximum gain indicated for that type, are strictly prohibited for use with this device.Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il faitpartie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenneénumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Lestypes d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictementinterdits pour l'exploitation de l'émetteur.](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-16.png)
![EMC Compliance StatementThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.5GHz5150-5250 MHz band is restricted to indoor operations only.17](https://usermanual.wiki/ADTRAN/SR900.User-manual-SR905ac/User-Guide-4036267-Page-17.png)