ADC Telecommunications PRSM074C FlexWave™ Prism - 40 Watt 700 Upper C - Band User Manual 77073
ADC Telecommunications Inc FlexWave Prism - 40 Watt 700 Upper C - Band 77073
Contents
- 1. Prism Brochure
- 2. Manual part 1
- 3. Manual part 2
- 4. Manual part 3
Manual part 3
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 213ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.9MANAGING HOST UNITS9.1 Viewing the Host Summary................................................................................2149.2 Resetting the Host Unit .....................................................................................2159.3 Viewing Host SeRF Ethernet Ports.......................................................................2179.4 Decommissioning a DART in a Host.....................................................................2209.5 Viewing the Host SeRF Summary........................................................................2229.6 Viewing Host SeRF Optical Ports.........................................................................2249.7 Viewing Host DART Alarms ................................................................................226Content Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-1.png)
![Managing Host UnitsPage 214 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/20099.1 VIEWING THE HOST SUMMARYThis section describes the read-only status indicators in the Host Summary view. For information on setting Host attributes, see “Enter a Host Name, Clock Source, and Linking Mode” on page 147 and “Changing to Built-In Network Mode” on page 186.To open the Host Summary view in the EMS View Frame, in the Function Explorer Tree select System View, and then click on the Host name node.The read-only status indicators are:•SERF—Current summary alarm state of Host SeRF card. Red indicates that a major alarm exists for some component module of the SeRF. Yellow indicates a minor alarm.•DART—Current summary alarm state is indicated by status indicator on same row of page. Red indicates that a major alarm exists for the DART. Yellow indicates a minor alarm. •Host Major Contact Alarm Output—Dry alarm NO/NC contact (labeled ALARM OUTPUTS HOST) on the Host. Current state of major alarm contacts is indicated by Alarm Summary status indicator on same row of page.•Host Minor Contact Alarm Output—Dry alarm NO/NC contact (labeled ALARM OUTPUTS HOST) on the Host. Current state of minor alarm contacts is indicated by Alarm Summary status indicator on same row of page.•Remote Major Contact Alarm Output—Red indicates Host NO/NC major alarm contacts are in an alarm position. These connections are typically wired to a local alarm alert system. This status indicator is red when a major alarm is present on any Remote connected to the Host.•Remote Minor Contact Alarm Output—Red indicates that Host NO/NC minor alarm contacts are in an alarm position. These connections are typically wired to a local alarm alert system. This status indicator is red when a minor alarm is present on any Remote connected to Host.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-2.png)
![Resetting the Host UnitFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 215ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.9.2 RESETTING THE HOST UNIT11 In the Function Explorer Tree, select System View, and then click on the Host name node to open the Host Summary view in the EMS View Frame.22 Click Reset Unit.Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.Resetting the Host Unit results in a Loss of Service condition for the Host and connected Remotes until the Host comes back up. Depending on the system configuration, it can take 5 to 20 minutes for management communication to be restored.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-3.png)
![Managing Host UnitsPage 216 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200933 In the confirmation dialog, click OK.Once you click OK, the confirmation dialog closes and the Host reboots. It will take some time for the Host to retrieve data from connected Remotes and to reconfigure data on the Remotes. During this time, an alert message displays in the Host Summary view and on any other page where data can be set. Any attempt to SET will fail. You cannot make configuration changes while this message is displayed. Wait until the message clears before continuing with configuration settings.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-4.png)
![Viewing Host SeRF Ethernet PortsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 217ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.9.3 VIEWING HOST SERF ETHERNET PORTSThe Host ENET Configurations view is a summary of throughput and number of errors on the twelve Ethernet (ENET) ports on the Host SeRF card. These ports consist of eight ports used for connection to Remotes and four ports used for system management and maintenance functions.11 In the Function Explorer Tree, select System View,Host-x,SERF,ENET (where -x is the Host name) to open the ENET Configurations view in the EMS View Frame.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-5.png)
![Managing Host UnitsPage 218 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200922 (Optional) To enlarge the view, click Full Screen to open a separate window that shows only the ENET Configurations table.33 To update the counters, click Refresh.TheENET Configurations view lists the Ethernet ports and their corresponding status.•• The row headers in the first column are as follows:–Switch Port—on card processor's connection to the switch on the SeRF card–Craft Port—on card processor's connection to the PHY port labeled Craft–OptEnetPort1-8—Ethernet switch interface to SFP 1-8–Network Port—Ethernet switch interface to on-card processor–Management Port—switch interface to the PHY port labeled Network•• The column headers, from left to right, are as follows:–Rx Bytes—Receive byte counter. Increments by the byte count of frames received, including those in bad packets, excluding preamble and SFD but including FCS bytes–Rx Pkts—Receive packet counter. Increments for each frame received packet (including bad packets, all unicast, broadcast, and multicast packets)–Rx FSC Errors—Receive FCS error counter. Increments for each frame received that has an integral 64 to 1518 length and contains a frame check sequence error](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-6.png)
![Viewing Host SeRF Ethernet PortsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 219ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.–Rx BroadCast Pkts—Receive broadcast packet counter. Increments for each broadcast good frame of lengths 64 to 1518 (non VLAN) or 1522 (VLAN), excluding multicast frames. Does not include range/length errors–Rx MultiCast Pkts—Receive multicast packet counter. Increments for each multicast good frame of lengths 64 to 1518 (non VLAN) or 1522 (VLAN), excluding broadcast frames. This count does not include range/length errors–Rx Fragmented Frames—Receive fragments counter. Increments for each frame received that is less than 64 bytes and contains an invalid FCS. This includes integral and non-integral lengths–Rx Jabber Frames—Receive jabber counter. Increments for frames received that exceed 1518 (non VLAN) or 1522 (VLAN) bytes and contain an invalid FCS. This includes alignment errors–Tx Byte Counter—Transmit byte counter. Increments by the number of bytes that were put on the wire including fragments of frames that were involved with collisions. This count does not include preamble/SFD or jam bytes. This counter does not count if the frame is truncated–Tx Pkt Counter—Transmit packet counter. Increments for each transmitted packet (including bad packets, excessive deferred packets, excessive collision packets, late collision packets, all unicast, broadcast, and multicast packets)–Tx BroadCast Pkts.—Transmit broadcast packet counter. Increments for each broadcast frame transmitted (excluding multicast frames)–Tx MultiCast Pkts.—Transmit multicast packet counter. Increments for each multicast valid frame transmitted (excluding broadcast frames)](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-7.png)
![Managing Host UnitsPage 220 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/20099.4 DECOMMISSIONING A DART IN A HOSTTheDecommission button is available only when a DART has already been physically removed. You use the Decommission button to remove DART configuration settings and to delete DART alarms from EMS alarm summaries. Entries in the Alarm History Log, however, are preserved.11 In the Function Explorer Tree, select System View,Host-x,SERF,DARTS (where -x is the Host name) to open the DART’s Alarm Summary view in the EMS View Frame.Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.This procedure is for decommissioning a DART in a Host. For information on decommissioning a DART in a Remote, see “Decommissioning an RF Module in a Remote” on page 232.Decommission a DART only if it has been permanently removed from the Remote and will not be replaced with another DART. When a DART is taken out of service, this procedure removes information about the DART (such as associated alarms, links, and inventory) from the EMS database.You must delete any RF links before you can decommission a Host DART. The FlexWave system prevents a decommission if RF links are in place.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-8.png)
![Decommissioning a DART in a HostFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 221ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.22 In the Information column, click on the Band-Configlink for the DART to be decommissioned. The Configuration and Alarm Details window opens.33 In the Configuration and Alarm Details window, click the Decommission button.44 In the confirmation dialog, click OK.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-9.png)
![Managing Host UnitsPage 222 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/20099.5 VIEWING THE HOST SERF SUMMARYTheHost SERF page provides a summary for the SeRF (Serial Radio Frequency) card located in the Host. The Host SeRF card contains the processor chip where the EMS software documented in this manual resides. The SeRF controls communication between the Host and the Remotes, and maintains the system configuration settings.In the Function Explorer Tree, select System View,Host-x,SERF (where -x is the Host name) to open the Prism on SERF of Host-n view in the EMS View Frame.ThePrism on SERF of Host-n view has the following elements:•Optical Ports—alarm status indicator for Host optical ports. Red indicates that an alarm exists for at least one of the eight optical ports on the SeRF card. Yellow indicates a minor alarm.•SERF Fault—state of the SeRF. Red indicates that either the SeRF clock source is unacceptable or the SeRF card FPGA is not programmed.•System Fan Fault—state of the Host chassis fan. Red indicates that the Host chassis fan is spinning too slowly.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-10.png)
![Viewing the Host SeRF SummaryFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 223ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.•Over Temperature Fault—Red indicates that the current chassis-internal temperature of the Host is above its operating limits. Fault threshold is 90° C.•Primary Clock Priority Fault—Indicates that there is another Host in a Multi-Host system that has the same Clock Priority Level (CPL) as this Host. All Hosts that are in conflict generate this alarm. When all Hosts with this alarm are provisioned with unique CPLs, the alarm clears. Service is disrupted on all systems when this alarm is present. The Primary Clock Priority Fault is a Major alarm.•Under Temperature Fault—Yellow indicates that the current chassis-internal temperature of the Host is below its operating limits. Fault threshold is -40° C.•Secondary Clock Priority Fault—In a three-Host system, indicates that the Clock Priority Level for the Host managing the Remote has been changed. All Hosts in the system generate this alarm. When all Hosts with this alarm are provisioned with unique CPLs, the alarm clears. Service is not disrupted, but could become disrupted if the host providing the clock becomes unavailable. The Secondary Clock Priority Fault is a Minor alarm.•Host Temperature Measurement—Gives the current chassis-internal temperature in degrees Centigrade detected by the Host.For corrective actions for alarm states, refer to “Troubleshooting Alarms” on page 264. For information on setting the Clock Priority Level, see “Set the Clock Priority Level” on page 150.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-11.png)
![Managing Host UnitsPage 224 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/20099.6 VIEWING HOST SERF OPTICAL PORTSTheHost Optical Ports view shows the current usage and alarm status of the optical ports on the Host plus the current values of some key operating parameters. The Host has eight optical ports, but the Host Optical Ports view only shows active ports (physically connected to a Remote). Each port in the page represents one set of forward and reverse paths between a Host and Remote. Physically, this may have been accomplished with two fibers through that port or with a single fiber (if WDM is used). Each physical port contains an SFP transceiver with two connectors.TheHost Optical Ports view provides a link that can be used to enter or edit the name for a Host optical port (see “Enter a Host Name, Clock Source, and Linking Mode” on page 147).For corrective actions for alarm states, refer to “Troubleshooting Alarms” on page 264.To access the Host Optical Ports view, in the Function Explorer Tree, select System View,Host-x,SERF,Optical Ports (where -x is the Host name).TheOptical Ports view for Host-n opens in the EMS View Frame, which only shows the Receive power level from the Remote unit (REV path). To see the Receive power level in the FWD path (from the Host to the Remote), you must open the Optical Ports viewfor the desired Remote as described in “Viewing Remote SeRF Optical Ports” on page 248.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-12.png)
![Viewing Host SeRF Optical PortsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 225ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.The following informational columns are provided in the Optical Ports table.•Optics Number—System assigned port number. This is a link to the PortConfiguration Page for this particular port.•Optics Name—user entered port name or UNKNOWN_SFPName, which indicates that no name has been entered. •Optics Type—indicates that the laser range, which is LongRange to meet 3Gbps optical transmission requirements.•Fwd Launch—Launch power level in dBm of forward path signal. The minimum FWD launch power is -2 dBm, and the maximum is 3 dBm.•Rev Receive—Receive power level in dBm of reverse path signal, which incorporates the launch power of the Remote Unit SFP plus all optical losses (insertion losses, fiber cable loss, and so forth). The minimum REV launch power is -27 dBm, and the maximum is -9 dBm.•Wave Length—Number displayed is wave length transmitted through this port:– Non-duplex and WDM configurations: 1550 nm fwd, 1310 rev– CWDM configurations can be one of eight wavelengths: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610.•IpEnable Fault—An attempt to enable IP on a fiber (Host) to a Remote that already has IP enabled on another fiber (Host) has been made. The alarm is cleared if IP is disabled on the fiber. It is also cleared if IP becomes enabled. This latter condition can occur if the fiber that was already carrying IP later has IP disabled, or if the fiber otherwise becomes disabled. For information on setting Ip Enable, see “Configure the Remote SeRF Optical Ports” on page 158.•RxBer Fault—Yellow indicates that too many errors have been received on the receiving fiber. Fault threshold is 0.00001. Threshold cannot be changed.•RxNoLight Fault—Red indicates that no light is detected on the receiving fiber. Fault threshold is below -34dBm.•Laser Fault—Red indicates that the forward path laser is faulty.•OverDrive Fault—Red indicates power of signal received on the fiber is too strong. Fault threshold is -9dBm. Threshold cannot be changed.•UnderDrive Fault—Yellow indicates power of signal received on fiber is too weak. Fault threshold is -27dBm. Threshold cannot be changed.•Remote Name—name of the Remote connected to this Optics port.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-13.png)
![Managing Host UnitsPage 226 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/20099.7 VIEWING HOST DART ALARMSA Host may support up to eight DART cards. Each DART card provides one RF band for up to eight Remotes. The DART card converts between serial (optical) and RF data in both forward and reverse directions. The Prism Host DART’s Alarm Summary view lists all DART cards currently installed in the Host and provides an alarm summary status indicator for each card. This page also provides a link, for each DART card, to a more detailed page that can be used to configure the DART card and obtain alarm details (for more information, see “Configure the Host DARTs” on page 152).11 In the Function Explorer Tree, select System View,Host-x,SERF,DARTS (where -x is the Host name) to open the Host DART’s Alarm Summary view in the EMS View Frame.22 In the Information column, click on the Band-Config link for the DART that you want to monitor. The Configuration and Alarm Details of DARTnon Host-x window opens (whereDARTn corresponds to the DART whose Band-Config link you selected).2](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-14.png)
![Viewing Host DART AlarmsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 227ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.TheConfiguration and Alarm Details of DARTnon Host-x window shows the following Host DART alarms:•DART Fault—Summary alarm state of the DART card. Red indicates a problem with passing RF.•DART Over Drive Fault—Red indicates that the RF signal received from the BTS is too strong. Fault threshold is +20dBm.•DART Hardware Mismatch Fault—Red indicates that the DART type doesn't match the assigned Pass Band. Examples: After assigning the Pass Band, if the DART is changed with another DART type, then the DART Hardware Mismatch Faultoccurs. Or, if you swap DART types (such as, from GSM1800 to UMTS), the DART Hardware Mismatch Fault is raised as the stored database has one DART type configured, and the new hardware doesn't match it.•DART UnderDrive Fault—Yellow indicates that the power of the signal received on the RF input to the DART is 20 dB below the optimal input level. For example:33 Click Refresh to update the alarm summary. For corrective actions for alarm states, refer to “Troubleshooting Alarms” on page 264.Host ForwardDART GainMaximum RMSInput PowerUnderDriveThreshold30 dB -25 dBm -45 dBm20 dB -15 dBm -35 dBm10 dB -5 dBm -25 dBm0 dB +5 dBm -15 dBm](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-15.png)
![Managing Host UnitsPage 228 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Intentionally Blank Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-16.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 229ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.10 MANAGING REMOTE UNITS10.1 Viewing Remote SeRF Ethernet Ports.................................................................23010.2 Decommissioning an RF Module in a Remote ......................................................23210.3 Configuring Dual-Slot LPAs ..............................................................................23510.4 Restarting an LPA ...........................................................................................23610.4.1 Identify the LPA Fault ..............................................................................23610.4.2 Reset the LPA.........................................................................................23810.5 Monitoring a Remote Unit ................................................................................24010.6 Decommissioning a Remote Unit.......................................................................24410.7 Resetting a Remote Unit..................................................................................24610.8 Viewing Remote SeRF Alarms...........................................................................24810.9 Viewing Remote SeRF Optical Ports...................................................................24810.10 Viewing an Alarm Summary of the Remote RF Groups .......................................25010.11 Viewing RF Band Alarm Details .......................................................................25210.12 Viewing Remote GPS Alarms and Location Parameters .......................................255Content Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-17.png)
![Managing Remote UnitsPage 230 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.1 VIEWING REMOTE SERF ETHERNET PORTSThe Remote SERF ENET page is a summary of throughput and number of errors on the twelve Ethernet (ENET) ports on the Remote SeRF card. These ports, located on the front side of the SeRF card, consist of eight ports used for connection to Remotes and four ports used for system management and maintenance functions. To open the ENET Configurations view in the EMS View Frame, in the Function Explorer Tree select System View,Remotes,SERF,ENET.TheENET Configurations view lists the Ethernet ports and their corresponding status.•Switch Port—on card processor's connection to the switch on the SeRF card•Craft Port—on card processor's connection to the PHY port labeled Craft•OptEnetPort1-8—Ethernet switch interface to SFP 1-8•Network Port—Ethernet switch interface to on-card processor•Management Port—switch interface to the PHY port labeled Network•Rx Bytes—Receive byte counter. Increments by the byte count of frames received, including those in bad packets, excluding preamble and SFD but including FCS bytes•Rx Pkts—Receive packet counter. Increments for each frame received packet (including bad packets, all unicast, broadcast, and multicast packets)•Rx FSC Errors—Receive FCS error counter. Increments for each frame received that has an integral 64 to 1518 length and contains a frame check sequence error](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-18.png)
![Viewing Remote SeRF Ethernet PortsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 231ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.•Rx BroadCast Pkts—Receive broadcast packet counter. Increments for each broadcast good frame of lengths 64 to 1518 (non VLAN) or 1522 (VLAN), excluding multicast frames. Does not include range/length errors•Rx MultiCast Pkts—Receive multicast packet counter. Increments for each multicast good frame of lengths 64 to 1518 (non VLAN) or 1522 (VLAN), excluding broadcast frames. This count does not include range/length errors•Rx Fragmented Frames—Receive fragments counter. Increments for each frame received that is less than 64 bytes and contains an invalid FCS. This includes integral and non-integral lengths•Rx Jabber Frames—Receive jabber counter. Increments for frames received that exceed 1518 (non VLAN) or 1522 (VLAN) bytes and contain an invalid FCS. This includes alignment errors•Tx Byte Counter—Transmit byte counter. Increments by the number of bytes that were put on the wire including fragments of frames that were involved with collisions. This count does not include preamble/SFD or jam bytes. This counter does not count if the frame is truncated•Tx Pkt Counter—Transmit packet counter. Increments for each transmitted packet (including bad packets, excessive deferred packets, excessive collision packets, late collision packets, all unicast, broadcast, and multicast packets)•Tx BroadCast Pkts.—Transmit broadcast packet counter. Increments for each broadcast frame transmitted (excluding multicast frames)•Tx MultiCast Pkts.—Transmit multicast packet counter. Increments for each multicast valid frame transmitted (excluding broadcast frames)](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-19.png)
![Managing Remote UnitsPage 232 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.2 DECOMMISSIONING AN RF MODULE IN A REMOTETheDecommission button is available only when a RF Module and hence the DART(s) have already been physically removed. You use the Decommission button when an RF Module and its DART(s) have taken out of service. This procedure removes all information about this RF Module (such as associated alarms, links, and inventory) from the EMS database. Entries in the Alarm History Log, however, are preserved.11 In the Function Explorer Tree, select System View,Remotes,Remote#-x,SERF,Optical Ports (where Remote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name). TheAlarm Summary of RF Groups view opens in the EMS View Frame. For a description of the RF Groups, see “RF Groups in the Remote and the EMS GUI” on page 160.Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.Decommission a RF Module only if it has been permanently removed from the Remote and will not be replaced with another DART. This procedure is for decommissioning a Remote’s RF Modules, which contain the Remote DARTS. For information on decommissioning a DART in a Host, see “Decommissioning a DART in a Host” on page 220.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-20.png)
![Decommissioning an RF Module in a RemoteFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 233ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.22 In the rectangle for the RF group selected, click on the config link for the band whose DART needs to be decommissioned.33 In the Configuration Details window, click the Decommission button.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-21.png)
![Managing Remote UnitsPage 234 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200944 In the confirmation dialog, click OK.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-22.png)
![Configuring Dual-Slot LPAsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 235ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.10.3 CONFIGURING DUAL-SLOT LPASBoth LPAs in a dual-slot 40W module can be controlled from the Configuration Detailswindow, which allows you to set the LPA Operating Mode, enable/disable a LPA, or reset a LPA, as shown below:The following rules apply to the dual-slot LPA installation:•• For the second LPA, the GUI displays it in an RF group by itself. There will be no DART in the RF group. However, you will be able to view alarms and configuration for the RF group in case of dual LPA setup. For the “missing” DART, default values will display. You cannot configure the missing DARTs, but can set the LPA mode and reset the LPA.•• User-initiated configuration of dual LPAs is simulataneous for both the LPAs. If one of the LPAs is placed into standby, both go into standby. If one is placed into normal mode, both go into normal mode.•• User initiated LPA resets are simulataneous. If one LPA is reset, so is the other.•• Alarm handling for the two LPAs occurs independently. If one alarms and goes intostandby, the second LPA continues in its current state. Automatic alarm recovery is also handled independently.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-23.png)
![Managing Remote UnitsPage 236 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.4 RESTARTING AN LPAYou use the LPA Reset button to bring an LPA back into service (restart) that stopped because of an LPA alarm. This section comprises a 6-step process that is broken into 2 sections that first identifies the fault and then resets the LPA.10.4.1 Identify the LPA Fault11 In the Function Explorer Tree, select System View,Remotes,Remote#-x,RF Groups(whereRemote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name). 22 In the rectangle for the RF group selected, click on the band link for the band whose LPA needs to be reset. The Alarm Details of DART-x of Group x on Remote#-xwindow opens (where x is the DART, Group or Remote name).An LPA Reset is necessary when any of the alarms listed below have occurred.•LPA Disable Fault—Red indicates that the Linear Power Amplifier is disabled because it encountered a problem. Check for a corresponding LPA fault listed in this section (such as LPA Loop Fault,LPA Over Power Fault, and so forth), then correct the LPA fault. If LPA Reset does not clear this alarm, the corresponding RF Module Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-24.png)
![Restarting an LPAFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 237ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.may need to be replaced. Contact ADC Technical Assistance for further help (see “Contacting ADC” on page 335).•LPA VSWR Fault—Red indicates an internal VSWR fault state of the LPA. Check the Remote’s antenna connection. If the connection is good and a subsequent LPA reset does not clear the alarm, inspect the blue cable going from the corresponding Remote Antenna port to the Duplexer—verify that the connection is tight. If this doesn't clear the fault, the Duplexer may need to be replaced. Notify ADC Technical Support (see “Contacting ADC” on page 335).•LPA DC Fault—Red indicates that the voltage level inside the LPA is outside its acceptable range. If the LPA Reset does not clear this alarm, contact ADC Technical Assistance for further help as the RF Module that contains the LPA or the Power supply within the SeRF Module may need to be replaced (see “Contacting ADC” on page 335).•LPA Loop Fault—Red indicates that the LPA is not sure of the feedback loop, so it has placed itself into a safe state. You can attempt to recover the LPA by reducing forward gain by 10dB on both DART cards, resetting the LPA, then restoring GAIN. If the reset does not work, contact ADC Technical Support (see “Contacting ADC” on page 335).•LPA Over Power Fault—Red indicates that the power level inside the LPA is high enough to damage the LPA. Reduce the Remote Forward Gain (see “Link the Host and Remote DARTs.” on page 159), then reset the LPA.•LPA Low Power Fault—Red indicates that the internal gain of the LPA does not meet specifications. In addition to an LPA Reset, try putting the LPA into standby and then back to enable to see if this clears this fault. If neither troubleshooting step clears this alarm, the corresponding RF Module may need to be replaced. contact ADC Technical Assistance for further help (see “Contacting ADC” on page 335).•LPA Missing Fault—Red indicates that the LPA is missing. This fault cannot be cleared with an LPA Reset.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-25.png)
![Managing Remote UnitsPage 238 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.4.2 Reset the LPA33 In the Function Explorer Tree, select System View,Remotes,Remote#-x,SERF,RF Groups (where Remote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name). 44 In the rectangle for the RF group selected, click on the config link for the band whose LPA needs to be reset. 55 In the Configuration Details window, click the LPA Reset button.Once an LPA Reset is started, Loss of Service occurs. It take approximately 10 to 20 seconds before the LPA signal recovers. The GUI RF power reading will take longer depending on the number of Remotes equipped—for a fully loaded Prism system with 8 Remotes the power reading could take several minutes to update.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-26.png)
![Restarting an LPAFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 239ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.66 In the LPA Reset caution dialog, click OK.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-27.png)
![Managing Remote UnitsPage 240 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.5 MONITORING A REMOTE UNIT11 In the Function Explorer Tree, select System View,Remotes to open the top level Remote Alarm Summary view in the EMS View Frame.22 If the Alarm Summary status indicator for any Remote is red or yellow, indicating that an alarm exists for that Remote, in the Function Explorer Tree, select the node that corresponds to that Remote. In the preceding example, you would click on the remote node labeled Rmt1_Hst1_Reg1.This opens the Prism Remote Unit Remote-n summary that corresponds to the selected Remote (Remote-n).](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-28.png)
![Monitoring a Remote UnitFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 241ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.33 If the SERF or RF Groups Alarm Summary status indicator is red or yellow, you must go another level lower in the Function Explorer Tree for this same Remote to select the page for the SeRF or RF Groups. For more information on these displays, see “Viewing Remote SeRF Alarms” on page 248 or “Viewing Remote SeRF Optical Ports” on page 248.The GPS alarm is not supported at present; this status indicator will be white.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-29.png)
![Managing Remote UnitsPage 242 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200944 If any status indicator in the Major Alarms or Minor Alarms table is red or yellow, refer to the following list:•Remote Capacity—Number of slots for RF Modules in the remote. Each RF Module comprises up to two Classic DARTS or Single SuperDARTs or one Dual SuperDART.•Remote Temperature field—Currently detected internal temperature of the Remote (measured near the SeRF board).•Host Lost Fault status indicator—Red indicates Remote has lost contact with Host. •Remote Lost Fault status indicator—Red indicates that the Host is unable to communicate with the Remote. •AC Power Supply Fault status indicator—Red indicates Remote power supply has failed.•Over Temperature Fault status indicator—Red indicates internal temperature in Remote is over its functional operating limit. Fault threshold is 84°C.•Fan Under Speed Fault—Red indicates that the speed of the Remote fan is not high enough for the internal functional temperature of the Remote.•Under Temperature Fault status indicator—Yellow indicates that the internal temperature within the Remote is under the operating limit. Fault threshold is -40°C.•Fan Over Speed Fault—Yellow indicates that the Remote fan is not necessary for the current internal temperature of the Remote, but the fan is spinning (Minor alarm).•Open Door Fault—Yellow status indicator for this Minor alarm, which indicates that the door to the Remote is open.•Apply button—When clicked, causes Remote Name entry to be applied•Refresh button—When clicked, causes page to be reloaded from HostDART ID 8RF Slot 4DART ID 7DART ID 6RF Slot 3DART ID 5DART ID 4RF Slot 2DART ID 3DART ID 2RF Slot 1DART ID 1SERF Board](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-30.png)
![Monitoring a Remote UnitFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 243ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.•Reset Unit button—When clicked, causes the Remote to reboot. This causes a Loss of Service until Remote has returned to normal operation. Typical down time is two to four minutes. See “Resetting a Remote Unit” on page 246.•Decommission Unit button—When clicked, deletes any configuration settings for that Remote and removes all corresponding alarms from the EMS alarm summaries (see “Decommissioning a Remote Unit” on page 244).The use of the Reset Unit button causes Loss of Service and should not be used unless other troubleshooting processes have been followed and did not fix the issue being experienced at the Remote.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-31.png)
![Managing Remote UnitsPage 244 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.6 DECOMMISSIONING A REMOTE UNITTheDecommission button is available only when a Remote has already been physically removed from the system. You use the Decommission button to delete alarms related to the removed Remote from the EMS alarm summaries.11 If the system is configured for manual linking mode, remove any RF links to the DART.22 In the Function Explorer Tree, select the node that corresponds to the Remote that has been physically removed from the Prism system. This opens the Prism Remote Unit Remote-n summary that corresponds to the selected Remote (Remote-n). There should be a statement that communication with the Remote has been lost.Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.Decommission a Remote only if it has been permanently removed from the Remote and will not be replaced with another Remote. This procedure removes all information about this Remote (such as associated alarms, links, and inventory) from the EMS database.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-32.png)
![Decommissioning a Remote UnitFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 245ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.33 Click Decommission Unit.44 In the confirmation dialog, click OK.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-33.png)
![Managing Remote UnitsPage 246 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.7 RESETTING A REMOTE UNITIf communication and/or reverse-path fiber is lost to the Remote, a Remote Reset can be attempted. 11 In the Function Explorer Tree, select the node that corresponds to the Remote that you want to reset. This opens the Prism Remote Unit Remote-n summary that corresponds to the selected Remote (Remote-n).22 Click the Reset Unit button.Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.Resetting the Remote causes Loss of Service and should not be used unless other troubleshooting processes have been followed and did not fix the issue being experienced at the Remote.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-34.png)
![Resetting a Remote UnitFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 247ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.33 In the confirmation dialog, click OK.The Remote reboots (resets), which causes a Loss of Service until the Remote has returned to normal operation. Typical down time is two to four minutes.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-35.png)
![Managing Remote UnitsPage 248 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.8 VIEWING REMOTE SERF ALARMSTo open the Prism on SERF of Remote-n view in the EMS View Frame, in the Function Explorer Tree select System View,Remotes,Remote#-x,SERF (where Remote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name).ThePrism on SERF of Remote-n view provides an alarm summary for the SeRF card on the identified Remote. •Optical Ports status indicator—Summary alarm status indicator for Remote optical ports. Red indicates no light (such as the RxNolight Fault) or a laser fault.•SERF Fault status indicator—Summary alarm status indicator for Remote SeRF card. Red indicates that an alarm exists for the Remote SeRF card. 10.9 VIEWING REMOTE SERF OPTICAL PORTSTheOptical Ports On Remote-n view shows the current usage and alarm status of the optical ports on the Remote, plus current values of operating parameters. The Optical Ports On Remote-n view only shows the ports that are in current use (that is, they have a fiber and connector plugged into them with the other end of the fiber being connected to Remote).To open the Optical Ports On Remote-n view in the EMS View Frame, in the Function Explorer Tree select System View,Remotes,Remote#-x,SERF,Optical Ports (where Remote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name).](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-36.png)
![Viewing Remote SeRF Optical PortsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 249ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.TheOptical Ports On Remote-n view provides an alarm summary for the SeRF card on the identified Remote. •Optics Number—System-assigned port number and link to the Port Configuration Page for this particular port•Optics Name—User-entered port name or UNKNOWN_SFPName indicating no name has been entered•Ip Enable—Disabled for Remotes. This parameter indicates if the link is carrying IP traffic. It can only be set on the Host as described in “Configure the Remote SeRF Optical Ports” on page 158.•Optics Type—Laser range, which is LongRange to meet 3Gbps optical transmission requirements.•Fwd Launch—Launch power in dB of REV path signal, from the Remote to the Host.•Rev Receive—Launch power in dB of receive level of the FWD path, from the Host to the Remote. The minimum REV launch power is -27 dBm, and the maximum is -9 dBm.•Wave Length—Number displayed is wave length transmitted through this port•RxBer Fault—Yellow indicates that there ware too many errors on the receiving fiber. Fault threshold is 0.00001.•RxNoLight Fault—Red indicates that no light is detected on the receiving fiber•Laser Fault—Red indicates reverse path laser is not sending light•OverDrive Fault—Red indicates forward path optical signal is too strong. Fault threshold is -9dBm.•UnderDrive Fault—Yellow indicates forward path optical signal is too weak. The underdrive is from -28dBm to -33dBm. Fault threshold is -27dBm.•Host Name—Name of the Host at the other end of the fiber.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-37.png)
![Managing Remote UnitsPage 250 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.10 VIEWING AN ALARM SUMMARY OF THE REMOTE RF GROUPSTheAlarm Summary of RF Groups of Remote-n view provides an alarm summary for the four RF groups on a particular Remote (Remote-n).To open the Alarm Summary of RF Groups of Remote-n view in the EMS View Frame, in the Function Explorer Tree select System View,Remotes,Remote#-x,RF Groups (where Remote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name). To understand how the EMS maps the RF Groups in the Remote to their representation in the GUI, see “RF Groups in the Remote and the EMS GUI” on page 160. The RF Group alarm indicators are listed below.•DART—Summary alarm state of the DART card upconverter, downconverter and the DART FPGA. Yellow indicates that a Minor alarm is the highest-level alarm and Red indicates that a Major alarm exists for the DART. •LPA—Summary alarm state of Linear Power Amplifier (LPA), where both LPA indicators refer to the same LPA. Yellow indicates that a Minor alarm is the highest-level alarm and Red indicates that a Major alarm exists for the LPA.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-38.png)
![Viewing an Alarm Summary of the Remote RF GroupsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 251ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.•LNA—Summary alarm state of the Low Noise Amplifier (LNA). Red indicates that an active alarm exists for the LNA.•Power Det—Red indicates that the LPA has been shut down. On initial configuration, the Power Det indicator will be red until the link is created.When a new dual-slot 40W RF Module is installed in a Prism system, in the AlarmSummary of RF Groups on Remote window, the status of the second LPA is in the slot below where the DART appears in the GUI.The following figure shows:•• 40W RF Module, PCS 1900 Non-Diversity Enclosure for Prism Remote installed in Slots D and C. The second LPA status is shown in Slot C.•• 40W RF Module AWS 2100 Non-Diversity Enclosure for Prism Remote installed in Slots B and A. The second LPA status is shown in Slot A.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-39.png)
![Managing Remote UnitsPage 252 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200910.11 VIEWING RF BAND ALARM DETAILSTheAlarm Summary of RF Groups of Remote-n view shows band-specific alarm indicators and their current values. 11 To open the Alarm Summary of RF Groups of Remote-n view in the EMS View Frame, in the Function Explorer Tree select System View,Remotes,Remote#-x,RF Groups(whereRemote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name).](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-40.png)
![Viewing RF Band Alarm DetailsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 253ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.22 Click on a DART band in the RF Groups view (upper link) to open the Alarm Details of DART-n of Group n on Remote-n window.TheAlarm Details of DART-n of Group n on Remote-n window has the the following components. For corrective actions for alarm states, refer to “TroubleshootingAlarms” on page 264.• DART Major Alarms–DART Fault—Summary alarm state of the DART card upconverter downconverter and the DART FPGA. Red indicates that either the clock source for the DART card is outside the acceptable range or the DART FPGA is not programmed. –DART DC Supply Fault—Red indicates DART card DC supply is faulted. –DART Hardware Mismatch Fault—Red indicates an invalid passband configuration for the DART. –DART Over Temperature Fault—Red indicates DART card internal temperature is too high. Fault threshold is 84°C.–DART Remote Ranging Fault—Red indicates that the Host is unable to implement the signal delay entered in the RF Band Configuration Page (described in “Link the Host and Remote DARTs.” on page 159).• Power Detector Major Alarms–System VSWR Fault—Red indicates a VSWR fault at the interface to the antenna (greater than 3:1).–RF Power Fault—Red indicates that the RF power measured at the antenna output is too low. The threshold for this fault is 0 dBm.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-41.png)
![Managing Remote UnitsPage 254 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009• LNA Major Alarms–LNA Power Fault—Red indicates that the Low Noise Amplifier has an internal error.• LPA Major Alarms–LPA Disable Fault—Red indicates that the Linear Power Amplifier is disabled because it encountered a problem.–LPA VSWR Fault—Red indicates that an internal VSWR fault state of the LPA. Fault threshold is 2.–LPA DC Fault—Red indicates that the voltage level inside the LPA is outside its acceptable range.–LPA Loop Fault—Red indicates that the feedback loop inside the LPA is not working.–LPA Over Power Fault—Red indicates that the power level inside the LPA is high enough to damage the LPA.–LPA Low Power Fault—Red indicates that the internal gain of LPA does does not meet specification.–LPA Missing Fault—Red indicates that the LPA is missing.• DART Minor Alarms–DART Low Temperature Fault—Yellow indicates DART temperature is too low. Fault threshold is -40°C.• LPA Minor Alarms–LPA High Temperature Fault—Yellow indicates that the LPA internal temperature is too high.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-42.png)
![Viewing Remote GPS Alarms and Location ParametersFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 255ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.10.12 VIEWING REMOTE GPS ALARMS AND LOCATIONPARAMETERSTheRemote GPS (Global Positioning System) page shows the alarm status and location parameters for the Remote GPS function.To open the GPS summary in the EMS View Frame, in the Function Explorer Tree select System View,Remotes,Remote#-x,GPS (where Remote# indicates the Remote number that corresponds to a Host SFP port number and n is the Remote name).GPS is not supported in the software version documented in this manual so the Remote GPS page components are not described.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-43.png)
![Managing Remote UnitsPage 256 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Intentionally Blank Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-44.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 257ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.11 MANAGING ALARMS11.1 Viewing Active Alarms .....................................................................................25811.2 Viewing an Alarm History Log...........................................................................25911.3 Masking an Alarm Type ...................................................................................26011.4 Unmasking an Alarm Type ...............................................................................26211.5 Troubleshooting Alarms...................................................................................264Some EMS parameter values are associated with alarms. When a parameter enters an alarm state, an alarm status indicator is activated where the color of the indicates the alarm severity, where:•• Red indicates a major alarm•• Yellow indicates a minor alarm•• Green indicates a normal (okay) state•• Grey indicates that the alarm has been masked•• White indicates that an associated device is unplugged or missing.Content Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-45.png)
![Managing AlarmsPage 258 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200911.1 VIEWING ACTIVE ALARMSViewing the Active Alarm List window is a means to determine alarm type, Host unit name, Remote name, time stamp, and other information for active alarms.11 To access the EMS Menu bar, in the Function Explorer Tree, click on System View to display a system view.22 To open the Active Alarm List window, in the EMS Menu bar select Active Alarm List.TheActive Alarm List table provides the following information:•Alarm Type—Descriptive name of alarm. For more information, refer to “Troubleshooting Alarms” on page 264.•Host No—Always “1”•Host Name—User-defined Host name or system default•Remote No—System assigned number of Remote from which alarm came•Remote Name—User-defined Remote name or system default•Module Type—Type of unit that is experiencing the alarm (SeRF, DART, LPA, LNA, Power Detector, SFP)•Module Number—Unit number of module experiencing the alarm condition•Severity—Major or Minor•Time Stamp—Date and time when the alarm occurred (YYYY:MM:DD:HH:MM:SS)](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-46.png)
![Viewing an Alarm History LogFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 259ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.11.2 VIEWING AN ALARM HISTORY LOG11 To access the EMS Menu bar, in the Function Explorer Tree, click on System View to display a system view.22 To open the Active Alarm List window, in the EMS Menu bar select Active Alarm List.33 To open the Alarm Log History window, in the Active Alarm List window click the History Log link.TheAlarm Log History window components are the same as for the Active Alarm Listwindow (see “Viewing Active Alarms” on page 258), except the Alarm Log Historywindow includes the severity of Clear if the alarm condition has been cleared.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-47.png)
![Managing AlarmsPage 260 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200911.3 MASKING AN ALARM TYPEMasking an alarm type causes the EMS to stop reporting alarms of that type until the alarm is unmasked. By default all alarms are unmasked. When an alarm type is masked (mask status enabled), the following is true:•• The corresponding status indicator shows in gray.•• The alarm state is not calculated into the higher level alarm summary •• The corresponding trap is not sent to SNMP managers.To mask an alarm:11 To access the EMS Menu bar, in the Function Explorer Tree, click on System View to display a system view.22 In the EMS Menu bar, select Alarm Management.TheAlarm Management Table window opens.Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-48.png)
![Masking an Alarm TypeFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 261ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.33 Click the list in the Mask Status column for the alarm for which you want to enable a mask, select enable, and then click Apply.In the following graphic, a mask has been enabled for the SeRF Secondary Clock Priority Fault.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-49.png)
![Managing AlarmsPage 262 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200911.4 UNMASKING AN ALARM TYPEUnmasking an alarm type causes the EMS to report alarms of that type until the alarm is masked. By default all alarms are unmasked. 11 To access the EMS Menu bar, in the Function Explorer Tree, click on System View to display a system view.22 In the EMS Menu bar, select Alarm Management.TheAlarm Management Table window opens.Only a user logged in under the admin or a Network Manager account can change Prism system settings through the EMS.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-50.png)
![Unmasking an Alarm TypeFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 263ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.33 Click the list in the Mask Status column for the alarm for which you want to disable a mask, select disable, and then click Apply.In the following graphic, masking has been disabled for the SeRF Secondary Clock Priority Fault.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-51.png)
![Managing AlarmsPage 264 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200911.5 TROUBLESHOOTING ALARMSThis section lists alarms that can be viewed in EMS alarm summaries.Table 11-1. EMS Alarm Descriptions and Corrective ActionsAlarm Name Alarm Severity LevelDescription ActionHostDARTDCSupplyFaultMajor The voltage supplied to the DART board is too low. (Host DC Power board accepts 21-60 Vdc and draws up to 427.28 Watts per Host.)Check whether the Vdc supply is in the range of 21-60 Vdc. If persistent (may be transient on startup), contact ADC.HostDARTDwnCon1SynLockFaultMajor Lock state of the first down converter synthesizer. Causes RF muteWhen a DART is being turned up or after a power reset, the DART synthesizers may go in and out of lock, which may cause this fault. Unless this fault persists, these transient faults can be ignored. If persistent, consult ADC, replace DARTHostDARTDwnCon2SynLockFaultMajor Lock state of the second downconvertersynthesizer. Causes RF muteWhen a DART is being turned up or after a power reset, the DART synthesizers may go in and out of lock, which may cause this fault. Unless this fault persists, these transient faults can be ignored. If persistent, consult ADC, replace DART](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-52.png)
![Troubleshooting AlarmsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 265ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.HostDARTFaultMajor Summary status of DART upconverter and/or downconverter and DART FPGA status. The clock source for the DART is outside an acceptable range or the DART FPGA is not programmed. may also occur with the DARTDCSupplyFault.Inspect ActiveAlarm List for upconverter and/or downconverter alarms. If these alarms are found and persist, consult ADC, replace DART. If no upconverter/downconverter alarms are found, unplug DART from Host, then replug DART in Host to reload the FPGA. If persistent, consult ADC, replace DART.HostDARTHardwareMismatchFaultMajor Indicates a hardware mismatch for the DART boards between linked Host and RemoteCheck if a linked DART of one type was unplugged and not decommissioned then replaced with a DART of another type. Make sure linked Host and Remote DARTs are of same type HostDARTOverDriveFaultMajor the RF signal received from BTS is greater than +5dBm. The allowed range is -25 dBm to +5 dBm.Lower the gain on the Host DART. If persistent when gain is zero, lower power of BTS RF signal. Maximum power at zero gain is +19dBm.HostDARTUnderDriveFaultMinor When the Host input level is 20 dB less than the expected Host DART Input. For example, for 30 dB of Host DART gain (-25 dBm expected input), the threshold is -45 dBm. For 0 dB of Host DART gain (+5 dBm expected input), the threshold is -15 dBm.Increase the gain of the Host DART. If persistent when gain is at maximum, increase power of BTS RF signal.HostDARTUpConSynLockFaultMajor Lock state of the upconvertor synthesizerIf persistent, consult ADC, replace DARTTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-53.png)
![Managing AlarmsPage 266 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009HostModuleMissingFaultMajor One of the pluggable modules is missing on the HostEither insert a replacement unit or decommission the unitHostOverTempFaultMajor The temperature of the Host is Over its upper limit of 84CCheck Host fan and ambient conditionsHostSERFFaultMajor Summary fault for SeRF combining SeRF synthesizer and SeRF FPGA status. Either the clock source is not acceptable or the SeRF board FPGA is not programmed.Check for related SeRF alarms in Active Alarm Listand respond to those alarms if found. If no SeRF alarms exists, FPGA is faulty; consult ADC, replace SeRF. If SeRF is replaced, use the same Compact Flash to retain system configuration.HostSERFOptOverDriveFaultMajor The power of the signal received from the Remote exceeds the maximum level of -9dBmExternally attenuate Remote return path signal or replace Remote SFP with one of less strengthHostSerfOptRxBerFaultMinor Too many errors on the receiving fiberCheck fiber for kink or sharp bend. Check for too much gain. Make sure the fiber is clean.HostSERFOptRxNoLightFaultMajor No light detected from the receiving fiberCheck for broken or disconnected fiber. Check for out of service RemoteHostSERFOptUnderDriveFaultMinor The power of the signal received on the fiber is below the minimum power level of -27dBmCheck fiber for too much attenuation, dirty connectors. Check SFP type being used (too weak for range)HostSERFRmtLostFaultMajor Host is not receiving messages from connected Remote or there is an IP conflict causing loss of communicationCheck for optics disconnect. Check for Remote out of power or out of serviceCheck for IP conflictTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-54.png)
![Troubleshooting AlarmsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 267ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.HostSERFSynthAlarmFaultMajor The configured clock source is not providing an acceptable signalIf clock source is onboard and persists, consult ADC, replace system card. If clock source is external, check clock source, connectionHostSysCardFanFaultMajor The Host fan is spinning too slowlyCheck fan for mechanical problem. If not fixable, consult ADC, replace fanHostUnderTempFaultMinor The temperature of the Host is under its lower operating limit (-40 degrees Fahrenheit )Check ambient conditionsRmtAcPowerSupplyFault,RmtACPowerSupplyMon1FaultMajor A power supply is in a failed stateIf persistent, consult ADC, may have to replace one or more power supply located in the SeRF ModuleRmtDARTDCSupplyFaultMajor The on-board DC voltages are out of their valid rangesIf persistent (may be transient on startup), check If the DC power switch to the DART is in the OFF position. If DC power is ON, reset set the RF Module. If the alarm persists, consult ADC, as you may have to replace RF ModuleRmtDARTDwnCon1SynLockFaultMajor Lock state of the first downconverter synthesizerIf persistent, consult ADC, replace RF ModuleRmtDARTDwnCon2SynLockFaultMajor Lock state of the second downconverter synthesizerIf persistent, consult ADC, replace RF ModuleRmtDARTFaultMajor Summary fault status of DART upconvertor/ downconverter and DART FPGA statusIf persistent, consult ADC, replace RF ModuleTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-55.png)
![Managing AlarmsPage 268 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009RmtDARTHardwareMismatchFaultMajor Indicates a hardware mismatch for the DART cards between linked Host and RemoteCheck if a linked DART of one type was unplugged and not decommissioned then replaced with a DART of another type. Make sure linked Host and Remote DARTs are of same type RmtDARTOverTempFaultMajor Indicates that detected temperature is above the maximum ambienttemperature of 50°C.Check air flow around Remote. If persists, consult ADC.RmtDARTUnderTempFaultMinor Indicates that detected temperature is below the lower acceptable limit (-40 degrees Farenheit)Check ambient conditionsRmtDARTUpConSynLockFaultMajor Lock state of the upconverter synthesizerIf persistent, consult ADC, replace RF ModuleRmtLNAPowerFaultMajor The low noise amplifier has an internal errorIf persistent, consult ADC, replace RF ModuleRmtLPADcFaultMajor The LPA voltage level is outside its acceptable range. Causes RF muteReset LPA and recheck. If alarm keeps coming back, consult ADC, replace RF ModuleRmtLPADetectFaultMajor Presence fault state of the LPA (the LPA cannot be detected)If persistent, consult ADC, replace RF ModuleRmtLPADisableFaultMajor Disable state of the LPA. The LPA is disabled because it encountered a problemSee “Identify the LPA Fault” on page 236.If fault cannot be corrected, replace the RF ModuleRmtLPAHighTempFaultMinor LPA is overheated Check ambient temperature. Check remote temperature. Reset LPA. If persistent, consult ADC, replace RF ModuleTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-56.png)
![Troubleshooting AlarmsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 269ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.RmtLPALoopFaultMajor The feedback loop inside the LPA is not working. Causes RF muteLower DART(s) remote gain by 10dB, reset the LPA, then return gain to values previously configured. If fault persists, replace RF Module.RmtLPALowPowerFaultMajor Internal low power fault state of linear power amplifier (the gain of one or more internal amplifiers does not meet specification). Causes RF muteReset LPA. If error persists, consult ADC, replace RF ModuleRmtLPAOverPowerFaultInternal over power fault state of linear power amplifier (power level is high enough to damage LPA)Reduce FWD gain, reset the LPA, and then monitor power levels. Adjust gain to acceptable values. Reset LPA. If error persists, consult ADC, replace RF ModuleRmtLPAVswrFaultMajor Internal VSWR fault state of linear power amplifier (greater than 3:1). Causes RF muteReset LPA. If error persists, consult ADC, replace RF ModuleRmtMajorExtAlarmInputFaultMajor External major alarm contact inputNot usedRmtMinorExtAlarmInputFaultALARM-TYPE (Minor,OK) External minor alarm contact inputNot usedRmtModuleMissingFaultMajor One of the pluggable modules is missing on the RemoteReplace or decommission the missing moduleTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-57.png)
![Managing AlarmsPage 270 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009RmtNoRFPowerFaultMajor The RF power measured at the antenna output is too low. The threshold for this fault is 0 dBm.Verify that there is an active Host DART Under Drive Fault, which indicates a loss of BTS input. If this fault is active, address this problem and the RmtNoRFPowerFault should clear.If there is not an active Host DART Under Drive Fault, the problem may be the result of another LPA fault such as VSWR or Over Power Faults. If there are no other faults, then reset the Remote RF Module. If power is still not, present then replace the module.RmtOverTempFaultMajor High temperature reading from RSI card in RemoteCheck ambient temperature. Check remote temperature. If not an actual over temperature fault, shut down Remote, consult ADCRmtRangingFaultMajor The configured delay is outside the range of what can be supplied.Enter a delay value within the permissible range see “Link a Remote DART to a Host DART” on page 162RmtSERFFaultMajor Summary fault for SeRF combining SeRF synthesizer and SeRF FPGA statusCheck for related SeRF alarms in active alarms list and respond to those alarms if found. If no SeRF alarm exists, FPGA is faulty; consult ADC, replace SeRFTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-58.png)
![Troubleshooting AlarmsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 271ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.RmtSERFHstLostFaultMajor Remote not receiving any messages from connected HostThere are two possible actions:•Check for optics disconnect. Check the optical link and determine the source of lost communications. If an optical meter on the output of the SFP determines that no power is being transmitted, or meter measuring receive levels at the SFP determines the receiver is broken, replace SFP with the appropriate type for the range of signal supported.•There may be an IP conflict. For example, if the Host is configured in External Network mode but there's not a DHCP server running on the network, the Remote will not receive an IP address, there therefore will not be communication with the Host, which would activate this alarm.RmtSERFOptLaserFaultMajor SFP reports that laser of forward path is faultyReplace SFP with the appropriate type for range of signal supportedRmtSERFOptOverDriveFaultMajor The power of the signal received at the Remote is too strongExternally attenuate Host forward path signal or replace Host SFP with one of less strengthTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-59.png)
![Managing AlarmsPage 272 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009RmtSERFOptRxBERFaultMinor Too many errors on the receiving fiberCheck fiber for kink or sharp bend. Check for too much gain. Make sure the fiber is clean.RmtSERFOptRxNoLightFaultMajor No light detected from the receiving fiberCheck for broken or disconnected fiber. Check for out of service HostRmtSERFOptUnderDriveFaultMinor The power of the signal received on the fiber is too weakCheck fiber for too much gain, dirty connectors. Check SFP type being used (too weak for range)RmtSERFSynthAlarmFaultMajor Onboard synthesizer faultCheck clock signal coming from Host. Host is not generating a proper signal. Possibly Host clock source is bad or Host has bad FPGARmtSystemVswrFaultMajor LPA VSWR Fault Perform cable sweeps on external antenna cable system. Put a load on the Remote by disconnecting the external antenna cable to determine if the source of the VSWR condition is internal or external. If it's internal, replace the RF Module. If it's external,troubleshoot and determine source of high VSWR reading.RmtUnderTempFaultMinor Temperature is below lower acceptable limit (-40 degrees Farenheit)Check ambient conditionsTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-60.png)
![Troubleshooting AlarmsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 273ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuHstSERFOptIpEnableFaultMajor An attempt to enable IP on a fiber (Host) to a Remote that already has IP enabled on another fiber (Host) has been made.The alarm is cleared if IP is disabled on the fiber. It is also cleared if an ACK is later received from the Remote. This latter condition can occur if the fiber that was already carrying IP later has IP disabled, or if the fiber otherwise becomes disabled. For information on setting Ip Enable, see “Configure the Remote SeRF Optical Ports” on page 158fwuRmtFanOverSpeedFaultMinor Remote fan has an Over Speed faultFan may require replacement.fwuRmtFanUnderSpeedFaultMajor Remote fan has an Under Speed faultFan may require cleaning and/or replacement.fwuRmtOpenDoorFaultMinor Door on the Remote is openClose the Remote doorfwuHstSysCardPrimaryCPFaultMajor Primary Clock Priority Fault Set Primary CPL within acceptable rangefwuHstSysCardSecondaryCPFaultMinor Secondary Clock Priority FaultSet Secondary CPL within acceptable rangeTable 11-1. EMS Alarm Descriptions and Corrective Actions (Cont.)Alarm Name Alarm Severity LevelDescription Action](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-61.png)
![Managing AlarmsPage 274 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-62.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 275ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.12 SNMP INTERFACE12.1 EMS SNMP Interface .......................................................................................27612.2 SNMP Overview..............................................................................................27712.2.1 Background Information on SNMP .............................................................27812.2.2 MIB Used by FlexWave System .................................................................28012.3 SNMP Procedures ...........................................................................................28112.4 Accessing the FlexWave-Prism Agent MIB ..........................................................28212.5 Configuring the Trap Viewer.............................................................................28312.5.1 Registering the Manager for Receiving Traps (static—non AdventNet MIB Browser) .............................................................28312.5.2 Registering the Manager for Receiving Traps (dynamic—AdventNet MIB Browser) ...............................................................28412.5.3 Viewing Traps.........................................................................................28712.5.3.1 Date and Time Stamps ....................................................................28712.5.3.2 Variable Bindings ............................................................................28812.5.3.3 View the Traps................................................................................29012.6 FlexWave-URH Agent MIB................................................................................29212.7 Traps ............................................................................................................308Content Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-63.png)
![SNMP InterfacePage 276 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.1 EMS SNMP INTERFACESNMP (Simple Network Management Protocol) is an international standard for remote monitoring and control of online devices. The EMS provides an interface for those wishing to access a Prism system using an SNMP manager such as the AdventNet application shown in Figure 12-1.Figure 12-1. EMS SNMP Interface ExampleThe FlexWave EMS SNMP interface can manage FlexWave Prism and URH units. This document describes how to use the SNMP interface with a Prism system.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-64.png)
![SNMP OverviewFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 277ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.12.2 SNMP OVERVIEWThe FlexWave system SNMP interface, shown schematically in Figure 12-2, allows a remote user using an SNMP manager to access the same database as accessed by the standard EMS interface. The database accessed is an SNMP database called a Management Information Base (MIB).Figure 12-2. SNMP InterfaceThis section describes the FlexWave system SNMP interface, and provides proceduresfor using the SNMP interface to “get” and “set” system parameters and receive alarms. In SNMP terminology, the parameters in a MIB are called “objects” and alarms are called “traps.”IPIPWebGET/SETTRAP75356-05Windows 2000 or Windows XPcomputer runningInternet Explorer 6.0and/or SNMP ManagerMIBEMSINTERNALNetwork portURH Host Unit](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-65.png)
![SNMP InterfacePage 278 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.2.1 Background Information on SNMPSNMP (Simple Network Management Protocol) is an international standard for remote control of online devices. A typical scenario involves the devices being controlled, remote computers (called managers) that can control them, a network connection, and SNMP software. The SNMP software includes SNMP manager software on each controlling computer and SNMP “proxy agent” software and one or more MIBs on each of the controlled devices. A MIB is a database defined in accordance with SNMP requirements. A MIB consists of tables of objects used to exchange information between a manager and agent. Information is exchanged using three basic operations: GET, SET, and TRAP. A manager uses GET to obtain an object value from a MIB and SET to set an object to a new value. A TRAP is a notification that is sent out by an agent when the value of a trap object exceeds a threshold defining an alarm state.In a manager browser, a MIB looks like an Explorer hierarchy of folders and files, as shown in Figure 12-3. The items at the lowest level, analogous to files in the Explorer view, are not files, however; they are objects that each represent one system parameter (object) and its current value. MIB objects are arranged in tables. Each set of objects (within a single folder) represents one such table. An object marked with a key symbol indicates that view is the key value for that table.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-66.png)
![SNMP OverviewFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 279ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.Figure 12-3. MIB in MIB BrowserIn the FlexWave system, the MIB accessed through the SNMP interface is the same database as used by the EMS graphical user interface. There is therefore a one-to-one correspondence between MIB objects and the parameters displayed in the EMS Web pages. Likewise, there is a one-to-one correspondence between the SNMP trap objects and the alarm indicator LEDs displayed on the EMS pages. The MIB object names and the EMS page names for the same items differ in a way that can be easily figured out. For example, the MIB object “fwuHstDARTPassBand” corresponds to the “Host DART Pass Band” parameter on the Host DART Configuration and Alarm Details Page.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-67.png)
![SNMP InterfacePage 280 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.2.2 MIB Used by FlexWave SystemThe FlexWave system uses a single MIB called the ADC-FLEXWAVE-URH.mib. The MIB resides on the SeRF card in the Host where the EMS software also runs. The SNMP proxy agent software required for the interface with SNMP managers also resides and runs on the Host SeRF card.A complete list of the objects that compose the FlexWave-Prism Agent MIB are listed in this section in two tables. Table 12-2 on Page 292 lists objects that may be accessed for GET/SET operation. Table 12-3 on page 308 lists traps that are sent to SNMP managers registered to receive them whenever the respective fault condition occurs.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-68.png)
![SNMP ProceduresFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 281ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.12.3 SNMP PROCEDURESThis topic contains procedures done at the SNMP manager to interact with the FlexWave-Prism Agent MIB. Any SNMP manager may be used. These procedures are illustrated with examples from an AdventNet MIB Browser.Figure 12-4 shows the features of a typical MIB browser.Figure 12-4. Typical MIB BrowserExamples shown in this chapter use the AdventNet MIB Browser. Some procedural details may vary with another browser, but the basic steps are the same.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-69.png)
![SNMP InterfacePage 282 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.4 ACCESSING THE FLEXWAVE-PRISM AGENT MIBThe FlexWave-Prism Agent MIB can be accessed using any SNMP manager with an active network connection. The IP address of the FlexWave-Prism Host must be known and entered in the MIB browser.11 On the manager computer, open the MIB Browser. 22 Load the ADC-FLEXWAVE-URH.mib file.33 Enter the IP address of the Host of the FlexWave-Prism system in the text box provided next to Host.44 Enter the Port number as 8001.55 Enter the Read Community as public and Write Community as private.66 To see an overview the MIB content, expand the MIB tree.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-70.png)
![Configuring the Trap ViewerFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 283ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.12.5 CONFIGURING THE TRAP VIEWERConfiguring a trap viewer enables it to receive traps from the FlexWave system.12.5.1 Registering the Manager for Receiving Traps (static—non AdventNet MIB Browser)To receive traps, the manager must first be registered with the FlexWave-Prism Agent using the following procedure.11 Open a telnet or ssh connection to the Host.22 Stop the agent process with the following command: service URHagent stop33Edit /usr/local/fwu/conf/snmp/v2managertable.txt and add a line for each trap receiver that looks like this:155.226.32.101 8003 SNMP_VERSION_2c public 30 5 ACTIVE44 Start the agent process with the following command: service URHagent startThis procedure cannot be done with the AdventNet MIB Browser.The balance of the line should be the same for all trap managers, except:••Replace “155.226.32.101” in the example with the IP address of the computer being used by the trap manager. • 8003 is the destination port used. The Default SNMP trap port is 162. Any port number is supported.You can't use both a static and dynamic trap agent configuration. You can only use one or the other. If you configure static, the dynamic entries will be deleted.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-71.png)
![SNMP InterfacePage 284 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.5.2 Registering the Manager for Receiving Traps (dynamic—AdventNet MIB Browser)To receive traps, the manager must first be registered with the FlexWave-Prism Agent using the following procedure.11 Open the MIB-browser and load the SNMP-TARGET-MIB.22 Expand the MIB tree.33 Set the common parameters such as Host,Port and Community, and Write Community.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-72.png)
![Configuring the Trap ViewerFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 285ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.44 Select the snmpTargetAddrTable and then click on the View SNMP Data Table icon or View -> SNMP Table.55 In the window that opens, click Start.66 In the window that opens, click Add to add the manager information.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-73.png)
![SNMP InterfacePage 286 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200977 Set the manager information as follows:•snmpTargetAddrName—any unique name•snmpTargetAddrDomain—.1.3.6.1.6.1.1•snmpTargetAddrTAddress—IP address of the machine where you want to receive the traps, The port number should also be provided next to IP address (for example, #8004)•snmpTargetAddrTimeout—timeout value•snmpTargetAddrRetryCount—retry count•snmpTargetAddrTagList—any string that will be used as a community string to view the traps; the default community string is public•snmpTargetAddrParams—any string, usually group1•snmpTargetAddrStorageType—388 Click OK.The information given in Step 7 displays as a new row in the SNMP Table.99 Click Close to close the SNMP Table.You can't use both a static and dynamic trap agent configuration. You can only use one or the other. If you configure dynamic, the static entries will be deleted.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-74.png)
![Configuring the Trap ViewerFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 287ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.12.5.3 Viewing TrapsThis section describes how to view traps in the MIB Browser and how to interpret responses.12.5.3.1 Date and Time StampsThe FlexWave MIB imports the date and time in the format of:EEE, MMM dd, HH:mm:ssTable 12-1 describes the date and time fields.For example, Tuesday February 26 at 1:30:15 PM would be displayed as:TUE, FEB 26, 13:30:15Table 12-1. MIB Date and Time Stamp FieldsField Contents VariableEEE Three letter abbreviation for the day of the week SUN - SATMMM Three letter month abbreviation JAN - DECdd Two-digit day of the month 01-31HH Two-digit hour for a 24-hour clock; AM/PM will not display00 - 23mm Two-digit minute 00 through 59ss Two-digit second 00 through 59](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-75.png)
![SNMP InterfacePage 288 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.5.3.2 Variable BindingsFor Host Traps, there are 9 variable bindings:11 sysUpTime22 snmpTrapOID33 fwuTrapSequenceNumber44 fwuTrapTimeStamp55 fwuModuleNumber66 fwuModuleType77 fwuHstNumber88 fwuHstName99 fwuNotificationStatusFor Remote Traps, there are 11 variable bindings:11 sysUpTime22 snmpTrapOID33 fwuTrapSequenceNumber44 fwuTrapTimeStamp55 fwuModuleNumber66 fwuModuleType77 fwuHstNumber88 fwuHstName99 fwuRmtNumber100fwuRmtName111 fwuNotificationStatusYou can therefore determine the affected module based on the module number and type (variable binding 5 and 6).](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-76.png)
![Configuring the Trap ViewerFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 289ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.The module types are represented numerically as follows:11 Host22 Remote33 SeRF44DART55 SFP66 RSI77 RDI88 Power Detector99 LPA100 LNA111 Duplexer122 GPS](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-77.png)
![SNMP InterfacePage 290 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.5.3.3 View the Traps11 In the AdventNet MIB Browser, click the Trap Viewer icon on the Toolbar.TheTrap Viewer dialog opens.22 In the Port box, enter the desired port number. The default is 162.33 (Optional) In the Community box, enter the community string for the incoming traps. The default is public.44 Click the Addbutton to add the Port and Community list to the Trap list (visible in the TrapList list box).55 Click the Loadbutton to load the trap parser file.66 Click the Start button. Trap Viewer begins to receive traps from the specified port and community.To receive traps using the manager, you must first register the manager using the procedure in “Registering the Manager for Receiving Traps (static—non AdventNet MIB Browser)” on page 283 or in “Registering the Manager for Receiving Traps (dynamic—AdventNet MIB Browser)” on page 284.The Port and Community list can be deleted by clicking the Delete Entry button.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-78.png)
![Configuring the Trap ViewerFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 291ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.The traps when received are listed in the Trap Table. The trap table has the following five columns.•Class—defines the severity of the trap.•Type—defines the type of the trap or the inform request.•Source—represents the IP address of the source from where the traps were sent.•Date—shows the date and time when the trap was received.•Message—lists the VarBind list of the trap, if any.The status of the trap is displayed in the status pane at the bottom of the dialog box. Moreover, the Trap count and the inform count is displayed in the status pane.77 To log the received traps, select the Enable Logging check box. All the incoming traps are logged to a file. The default name of the log file is trap.log.88 To view the details of the traps, click on the Show Details button. You can also right-click the trap in the trap table and select View Trap Details.99 Click Stop to stop listening to the port. 100 To delete a trap, select the trap and click the Delete Entry button. You can also right-click the trap in the trap table and select Delete the Selected Rows.Another option in Trap Viewer is the ParserEditor.Trap Viewer can filter the incoming traps according to certain criterion called the Parser Criteria. The configuration of the criterion is made possible by using the ParserEditor.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-79.png)
![SNMP InterfacePage 292 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.6 FLEXWAVE-URH AGENT MIBObjects in the FlexWave-URH Agent MIB divide into two types: GET/SET objects and trap objects. This section describes the GET/SET objects. For information on trap objects, see “Traps” on page 308.Table 12-2 lists all objects within the FlexWave-URH Agent MIB that are available for GET and/or SET commands. Objects that are available for SET commands are also available for GET commands.For each SNMP syntax, there is a range of values defined in the MIB file. These are the possible values that can be entered in a SET command and returned in a GETcommand.You can also Enable or Disable masking, which sets whether the trap will be raised (Disable) or not (Enable). Thresholds dictate when a trap will be activated. Table 12-2lists all FlexWave-URH Agent MIB objects for which traps, masks and thresholds are sent to the SNMP manager.Table 12-2. FlexWave-URH Agent MIB GET/SET ObjectsObject Name Description SNMP Syntax Get or SETfwuTrapSequenceNumberTotal number of traps raised by the agent.Counter32 GETfwuTrapTimeStampTime stamp when trap was raised.DateAndTime GETfwuHstOverTempFaultMaskShow masking status of Over Temperature fault. Masking is disabled by default. If enabled, the trap will not be raised.MASKType SETfwuHstUnderTempFaultMaskShow status of masking of Under Temperature fault. Masking is disabled by default. If enabled, the trap will not be raised.MASKType SETfwuHstSERFFPGAStatusHost SeRF Card FPGA status where 0 indicates that the SeRF can talk to the FPGA and 1 indicates that it cannotINTEGER GETfwuHstSysCardRIADCPartNumberRemote Inventory Data-ADC Part NumberDisplayString GETfwuHstSysCardRISerialNumberRemote Inventory Data-Serial NumberDisplayString GETfwuHstSysCardRIDateCodeRemote Inventory Data-Date CodeDisplayString GETfwuHstSysCardRIHWVerRemote Inventory Data-Hardware VersionDisplayString GET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-80.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 293ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuHstSysCard10MhzRefClockSystem Card Reference clock, which can be can be internal (0) or external (1)INTEGER SETfwuHstSysCardCPLevelSystem Card Master Clock Priority Level, which can be from 0 to 15Integer SETfwuHstSysCardFanFaultMaskHost System Card Fan Fault Mask. The alarm is disabled by default. Enable the alarm by setting it to enabled (1).MASKType SETfwuHstSysCardPrimaryCPFaultMaskPrimary Clock Priority Fault Mask. The alarm is disabled by default. Enable the alarm by setting it to enabled (1).MASKType SETfwuHstSysCardSecondaryCPFaultMaskSecondary Clock Priority Fault Mask. The alarm is disabled by default. Enable the alarm by setting it to enabled (1).MASKType SETfwuHstOverTempThresholdHost System Card Over Temperature threshold value. This is not user settable.Integer32 SETfwuHstUnderTempThresholdHost System Card Under Temperature Threshold value. This is not user settable.Integer32 SETfwuRmtSERFFPGAStatusRemote SeRF Card FPGA status where 0 indicates that the SeRF can talk to the FPGA and 1 indicates that it cannotINTEGER GETfwuRmtRSIRIADCPartNumberRemote Inventory Data-ADC Part NumberDisplayString GETfwuRmtRSIRISerialNumberRemote Inventory Data-Serial NumberDisplayString GETfwuRmtRSIRIDateCodeRemote Inventory Data-Date CodeDisplayString GETfwuRmtRSIRIHWVerRemote Inventory Data-Hardware VersionDisplayString GETfwuRmtCapacityThe number of RF Modules that can be installed in the Remote (1 - 4)Unsigned32 GETfwuHstNumberFlexWave URH Host Number HOSTNBRType GETfwuHstNameUser assigned name of the Host. It can be 40 characters longDisplayString SETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-81.png)
![SNMP InterfacePage 294 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuHstUnitResetHost SeRF card can be reset by setting a value of 1INTEGER SETfwuHstBackPlaneRevRevision of Host back plane. DisplayString GETfwuHstAlarmStatusSummaryHost Alarm Status Summary, where the severity of the alarm is:•Normal = 1•Minor = 2•Major = 3• Not Present = 0ALARMType GETfwuHstTempMeasHost system temperature value in CelsiusDisplayString GETfwuSystemAlarmStatusSummarySystem Alarm Status Summary, where the severity of the alarm is:•Normal = 1•Minor = 2•Major = 3• Not Present = 0ALARMType GETfwuHstLinkingModeSystem Linking mode for DART linkingInteger SETfwuHstMajorContactAlarmOutputHost Major contact output port stateCONTACTTypeGETfwuHstMinorContactAlarmOutputHost Minor contact output port stateCONTACTTypeGETfwuRmtMajorContactAlarmOutputRemote Major contact output port stateCONTACTTypeGETfwuRmtMinorContactAlarmOutputRemote Minor contact output port stateCONTACTTypeGETfwuSystemAlarmSequenceNumberDefines the index of the Alarm TableUnsigned32 GETfwuSystemAlarmAgentUpTimeAgent up time TimeTicks GETfwuSystemAlarmTypeTrap OID of the Alarm OBJECTIDENTIFIERGETfwuSystemAlarmHstNumberHost number from which the alarm has been raisedHOSTNBRType GETfwuSystemAlarmHstNameName of the Host from which the alarm has been raisedDisplayString GETfwuSystemAlarmRmtNumberRemote number from which the alarm has been raisedREMOTENBRTypeGETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get or SET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-82.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 295ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuSystemAlarmRmtNameRemote name from which the alarm has been raisedDisplayString GETfwuSystemAlarmModuleTypeType of module raising the alarmMODULEType GETfwuSystemAlarmModuleNumberIdentifier of the module raising the alarm.Integer32 GETfwuSystemAlarmSeverityThis object gives the severity of this Alarm notification.•Normal = 1•Minor = 2•Major = 3• Not Present = 0ALARMType GETfwuSystemAlarmTimeStampTime stamp of the Alarm DateAndTime GETfwuHstSERFLinuxKernelVerLinux Kernel Version of the Host systemDisplayString GETfwuHstSERFLinuxBootLoaderVerBoot Loader Version of the Host systemDisplayString GETfwuHstSERFCompactFlashSWVerCompact Flash Version of the Host systemDisplayString GETfwuHstSERFFPGAVerVersion of FPGA image loaded on SeRFDisplayString GETfwuHstSERFPPCSNMPHTTPAgentSWVerSoftware Version of the HTTP/SNMP agent running on HostDisplayString GETfwuHstSERFPPCHWMonSWVerSoftware Version of the Hardware Monitor process running on the HostDisplayString GETfwuHstSERFPPCAPPMonSWVerSoftware Version of the Application Monitor process running on the HostDisplayString GETfwuHstSERFPPCMATEMonSWVerSoftware Version of the Mate Monitor process running on the HostDisplayString GETfwuHstSERFPPCENETMonSWVerSoftware Version of the Ethernet Monitor process running on the HostDisplayString GETfwuHstSERFPPCFPGAMonSWVerSoftware Version of the FPGA Monitor process running on the HostDisplayString GETfwuHstSERFRIDateCodeHost SeRF Inventory-Date CodeDisplayString GETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-83.png)
![SNMP InterfacePage 296 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuHstSERFRIHWVerHost SeRF Inventory-Hardware VersionDisplayString GETfwuHstSERFRISerialNumberHost SeRF Inventory-Serial NumberDisplayString GETfwuHstSERFRIADCPartNumberHost SeRF Inventory-ADC Part NumberDisplayString GETfwuHstSERFOptSFPNumberSFP Number-Optical Port number (from 1 to 8)INTEGER GETfwuHstSERFOptSFPNameUser defined name of the SFP Optical Port that can be up to 32 characters longDisplayString SETfwuHstSERFOptSFPTypeSFP Type-Optical Port Type OPTICSType GETfwuHstSERFOptSFPTxColorSFP wavelength in nanometer Integer32 GETfwuHstSERFOptRevLaunchPowerMeasValue of Host Receive measured optical power in dBmDisplayString GETfwuHstSERFOptFwdLaunchPowerMeasValue of Host Transmit measured optical power in dBmDisplayString GETfwuHstSERFOptMateNameName of Host Mates DisplayString GETfwuHstSERFIPEnableIP Enable mode for Host carrying RF, where 1 equals enableInteger SETfwuHstSERFOptRxBERFaultThresholdThreshold Value for declaring a Decoded word error state of the primary wavelength optical receiver (too many errors)DisplayString SETfwuHstSERFOptOverDriveFaultThreshldThreshold value for declaring SFP over drive fault. This is not user settable.Integer32 SETfwuHstSERFOptUnderDriveFaultThreshldThreshold value for declaring SFP under drive fault. This is not user settable.Integer32 SETfwuHstSERFOptRxBERFaultMaskShows the masking status of primary wavelength optical receiver; masking is disabled by default; if enabled, the trap will not be raised.MASKType SETfwuHstSERFOptOverDriveFaultMaskShows the masking status of SFP Over Drive Fault; masking is disabled by default; if enabled, the trap will not be raised.MASKType SETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get or SET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-84.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 297ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuHstSERFOptUnderDriveFaultMaskShows the masking status of Under Drive Fault. Masked is disabled by default. If enabled, the trap will not be raised.MASKType SETfwuHstSERFOptIpEnableFaultMaskShows the masking status of the IP Enable Fault. Masked is disabled by default. If enabled, the trap will not be raised.MASKType SETfwuHstSERFEthPortNumberA unique identifier for each Ethernet port (from 1 to 12)Unsigned32 GETfwuHstSERFEthPortTypeIdentifies the type of Ethernet portENETType GETfwuHstSERFEthPortRxBytesReceive byte counter Counter64 GETfwuHstSERFEthPortRxPktsReceive packet counter Counter64 GETfwuHstSERFEthPortRxFcsErrorsReceive FCS error counter Counter64 GETfwuHstSERFEthPortRxBroadcastPktsReceive Broadcast packet counterCounter64 GETfwuHstSERFEthPortRxMulticastPktsReceive Multicast packet counterCounter64 GETfwuHstSERFEthPortRxFragmtdFramesReceive fragments counter Counter64 GETfwuHstSERFEthPortRxJabbersFramesReceive jabber counter Counter64 GETfwuHstSERFEthPortTxByteCounterTransmit byte counter Counter64 GETfwuHstSERFEthPortTxPktsTransmit packet counter Counter64 GETfwuHstSERFEthPortTxBroadcastPktsTransmit broadcast packet counterCounter64 GETfwuHstSERFEthPortTxMulticastPktsTransmit multicast packet counterCounter64 GETfwuHstSERFEthPortSFPIdIdentifier of SFP to which this Ethernet port connectsUnsigned32 GETfwuHstDARTNumberA unique identifier for each DART Card Object (from 1 to 8)Integer32 GETfwuHstDARTNameA user defined name for each DART Card object that can be up to 32 characters longDisplayString SETfwuHstDARTBandTypeBand type of Host DART card BANDType GETfwuHstDARTPassBandPass-band type of host DART card.PASSBANDTypeSETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-85.png)
![SNMP InterfacePage 298 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuHstDARTOperatingModeOperating mode of Host DART cardMODEType SETfwuHstDARTDiversityStatusDiversity Status of Host DART card, where diversity is 1 and no diversity is 0INTEGER SETfwuHstDARTForwardGainPrimary Gain in forward path of Host DART cardGAINType SETfwuHstDARTReverseGainPrimary Gain in reverse path of Host DART cardGAINType SETfwuHstDARTFPGAStatusIndicates if the Host SeRF FPGA can talk to the DART FPGA where 0 indicates that the SeRF can talk to the FPGA and 1 indicates that it cannotINTEGER GETfwuHstDARTFPGAProgramVerFPGA Version on the Host DART cardDisplayString GETfwuHstDARTRIADCPartNumberHost DART Inventory Data-ADC Part NumberDisplayString GETfwuHstDARTRISerialNumberHost DART Inventory Data-Serial NumberDisplayString GETfwuHstDARTRIDateCodeHost DART Inventory Data - Date CodeDisplayString GETfwuHstDARTRIHWVerHost DART Inventory Data-Hardware VersionDisplayString GETfwuHstDARTRowStatusStatus of this conceptual row RowStatus SETfwuHstDARTOverDriveFaultThresholdThreshold value for Host DART Card Over Drive. This is not user settable.DisplayString SETfwuHstDARTUnderDriveFaultThresholdThreshold value for Host DART Card Under Drive. This is not user settable.DisplayString SETfwuRmtNumberThe Remote number of Remote connected (from 1 to 8)INTEGER GETfwuRmtCatalogStateCatalog state of Remote. If fwuRmtCatalogState is commission (2) state, commission Remote. If it is in normal (1) state, do not commission RemoteCATALOGTypeGETfwuRmtNameUser defined name of the Remote, which can be up to 40 characters longDisplayString SETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get or SET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-86.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 299ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuRmtAlarmStatusSummarySummary of alarm status of all connected remote units where:•Normal = 1•Minor = 2•Major = 3• Not Present = 0ALARMType GETfwuRmtTempMeasurementTemperature of each Remote in Celsius. This value comes from the RSIDisplayString GETfwuRmtGeneralTableRowStatusStatus of this conceptual row RowStatus SETfwuRmtTypeType of Remote: Prism or URH REMOTEType GETfwuRmtSERFLinuxKernelVerLinux Kernel Version of the Remote systemDisplayString GETfwuRmtSERFLinuxBootLoaderVerLinux Boot loader Version of the Remote systemDisplayString GETfwuRmtSERFCompactFlashSWVerCompact Flash Software Version of the Remote systemDisplayString GETfwuRmtSERFFPGAVerVersion of FPGA loaded on SeRFDisplayString GETfwuRmtSERFPPCHWMonSWVerHardware monitor process Software Version of the Remote systemDisplayString GETfwuRmtSERFPPCAPPMonSWVerApplication monitor process Software Version of the Remote systemDisplayString GETfwuRmtSERFPPCGPSMonSWVerGPS monitor process Software Version of the Remote systemDisplayString GETfwuRmtSERFPPCSNMPHTTPAgentSWVerSNMP agent Software Version of the Remote systemDisplayString GETfwuRmtSERFPPCMATEMonSWVerMate monitor process Software Version of the remote system.DisplayString GETfwuRmtSERFPPCENETMonSWVerENET monitor process Software Version of the Remote systemDisplayString GETfwuRmtSERFPPCFPGAMonSWVerFPGA monitor process Software Version of the Remote systemDisplayString GETfwuRmtSERFRIDateCodeRemote SeRF Inventory-Date Code of the Remote systemDisplayString GETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-87.png)
![SNMP InterfacePage 300 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuRmtSERFRIHWRevRemote SeRF Inventory - Hardware Version of the Remote systemDisplayString GETfwuRmtSERFRISerialNumberRemote SeRF Inventory-Serial NumberDisplayString GETfwuRmtSERFRIADCPartNumberRemote SeRF Inventory-ADC Part NumberDisplayString GETfwuRmtSERFOptSFPNumberA unique identifier of each SFP (from 1 to 8)INTEGER GETfwuRmtSERFOptSFPNameUser defined name of each Remote SFP.It can be 32 character long.DisplayString SETfwuRmtSERFOptSFPTypeSFP Type-Optical Port Type OPTICSType GETfwuRmtSERFOptSFPColorSFP wavelength in nanometer. Integer32 GETfwuRmtSERFOptRevLaunchPowerMeasValue of Remote Receive measured optical power in dbmDisplayString GETfwuRmtSERFOptFwdLaunchPowerMeasValue of Remote Transmit measured optical power in dbmDisplayString GETfwuRmtSERFOptMateNameName of Remote mate DisplayString GETfwuRmtSERFIPEnableIP Enable mode for Host connected to the Remote that is carrying RF, where 1 equals enableInteger GETfwuRmtSERFOptRxBERFaultThresholdThreshold Value for declaring a Decoded word error state of the primary wavelength optical receiver (too many errors). This is not user settable.DisplayString SETfwuRmtSerfOptOverDriveFaultThreshldThreshold value for declaring SFP over drive fault. This is not user settable.Integer32 SETfwuRmtSerfOptUnderDriveFaultThreshldThreshold value for declaring SFP under drive fault. This is not user settable.Integer32 SETfwuRmtSERFOptRxBERFaultMaskTrap enable/disable for primary wavelength optical receiver; trap is enabled by default; if disabled, the trap will not be raisedMASKType SETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get or SET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-88.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 301ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuRmtSERFOptOverDriveFaultMaskTrap enable/disable for SFP Over Drive Fault. Trap is enabled by default. If disabled, the trap will not be raised.MASKType SETfwuRmtSERFOptUnderDriveFaultMaskTrap enable/disable for SFP Under Drive Fault; trap is enabled by default; if disabled, the trap will not be raisedMASKType SETfwuRmtSERFEthPortNumberA unique identifier for each Ethernet port (from 1 to 12)Unsigned32 GETfwuRmtSERFEthPortTypeAn identifier for the type of Ethernet portENETType GETfwuRmtSERFEthPortRxBytesReceive byte counter Counter64 GETfwuRmtSERFEthPortRxPktsReceive packet counter Counter64 GETfwuRmtSERFEthPortRxFscErrorsReceive FCS error counter Counter64 GETfwuRmtSERFEthPortRxBroadcastPktsReceive broadcast packet counterCounter64 GETfwuRmtSERFEthPortRxMulticastPktsReceive multicast packet counterCounter64 GETfwuRmtSERFEthPortRxFragmtdFramesReceive fragments counter Counter64 GETfwuRmtSERFEthPortRxJabbersFramesReceive jabber counter Counter64 GETfwuRmtSERFEthPortTxByteCounterTransmit byte counter Counter64 GETfwuRmtSERFEthPortTxPktsTransmit packet counter Counter64 GETfwuRmtSERFEthPortTxBroadcastPktsTransmit multicast packet counterCounter64 GETfwuRmtSERFEthPortTxMulticastPktsTransmit broadcast packet counterCounter64 GETfwuRmtSERFEthSFPIDIdentifier of SFP to which this Ethernet port connects toUnsigned32 GETfwuRmtDARTNumberA unique identifier for each DART Card Object of Remote (from 1 to 8)Integer32 GETfwuRmtDARTNameA user defined name for each DART Card object of Remote, which can be up to 32 charactersDisplayString SETfwuRmtDARTBandTypeBand type of Remote DART cardBANDType GETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-89.png)
![SNMP InterfacePage 302 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuRmtDARTPassBandPass-band type of remote DART card.PASSBANDTypeSETfwuRmtDARTOperatingModeOperating mode of Remote DART cardMODEType SETfwuRmtDARTDiversityStatusDiversity Status of Remote DART card, where diversity is 1 and no diversity is 0INTEGER SETfwuRmtDARTForwardGainPrimary Gain in forward path of Remote DART cardGAINType SETfwuRmtDARTReverseGainPrimary Gain in reverse path of Remote DART cardGAINType GETfwuRmtDARTForwardDelayForward Delay for Remote DART card Micro Seconds (from 1 to 500). If the Forward Delay value is not equal to Actual Forward Delay value then, then a Ranging fault will be raised if the Remote DART is LinkedDELAYType SETfwuRmtDARTReverseDelayReverse Delay for Remote DART card Micro Seconds (from 1 to 500). If the Reverse Delay value is not equal to the Actual Reverse Delay value then, then a Ranging fault will be raised if the Remote DART is linkedDELAYType SETfwuRmtDARTTempMeasTemperature value of Remote DART cardDisplayString GETfwuRmtDARTFPGAStatusIndicates if the Remote SeRF FPGA can talk to DART FPGA where 0 indicates that the SeRF can talk to the DART and 1 indicates that it cannotINTEGER GETfwuRmtDARTFPGAProgramVerFPGA Version on the Remote DART cardDisplayString GETfwuRmtDARTRIADCPartNumberRemote DART Inventory Data-ADC Part NumberDisplayString GETfwuRmtDARTRISerialNumberRemote DART Inventory Data-Serial NumberDisplayString GETfwuRmtDARTRIDateCodeRemote DART Inventory Data - Date CodeDisplayString GETfwuRmtDARTRIHWVerRemote DART Inventory Data-Hardware VersionDisplayString GETfwuRmtDARTGeneralTableRowStatusStatus of a row in the DART General tableRowStatus SETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get or SET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-90.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 303ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuRmtDARTActualForwardDelayForward Delay for Remote DARTInteger32 GETfwuRmtDARTForwardLowerboundDelayLower bound forward delay valueInteger32 GETfwuRmtDARTForwardUpperboundDelayUpper bound delay value Integer32 GETfwuRmtDARTActualReverseDelayReverse Delay for Remote DARTInteger32 GETfwuRmtDARTReverseLowerboundDelayLower bound Reverse delay valueInteger32 GETfwuRmtDARTReverseUpperboundDelayUpper bound Reverse delay valueInteger32 GETfwuRmtDARTOverTempFaultMaskMasking status of DART over Temp fault; masking is disabled by default.If enabled trap will not raisedMASKType SETfwuRmtDARTUnderTempFaultMaskMasking status of DART under Temp fault. Masking is disabled by default.If enabled trap will not raisedMASKType SETfwuRmtDARTOverTempThresholdThreshold value for remote DART over temperature. This is not user settable.MASKType SETfwuRmtDARTUnderTempThresholdThreshold value for remote DART under temperature. This is not user settable.MASKType SETfwuRmtGPSLongitudeDegreesThe GPS Longitude in Degrees (from -180 to 180)INTEGER GETfwuRmtGPSLongitudeMinutesThe GPS Longitude in Minutes (from -59 to 59)INTEGER GETfwuRmtGPSLongitudeSecondsThe GPS Longitude in milliseconds (from -5999 to 5999)INTEGER GETfwuRmtGPSLatitudeDegreesThe GPS Latitude in Degrees (from -180 to 180)INTEGER GETfwuRmtGPSLatitudeMinutesThe GPS Latitude in Minutes (from -59 to 59)INTEGER GETfwuRmtGPSLatitudeSecondsThe GPS Latitude in milliseconds (from -5999 to 5999)INTEGER GETfwuRmtGPSAltitudeMetersThe GPS Altitude in Meters (from -180 to 180)INTEGER GETfwuRmtGPSNumberOfSatelliteThe Number of satellites discovered (from -180 to 180)INTEGER GETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-91.png)
![SNMP InterfacePage 304 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuRmtGPSFaultMaskShows masking status of GPS Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuRmtLPANumberA unique identifier for an LPA (from 1 to 4)Integer32 GETfwuRmtLPAResetSet this object to a value of 1 to cause LPA to reset itself. Normal value is 0INTEGER SETfwuRmtLPAOpStateOperating mode of Remote LPA, where normal is 0 and standby is 1INTEGER SETfwuRmtPowerDetectorNumberA unique identifier for each power detector (from 1 to 4)Integer32 GETfwuRmtSystemVSWRMeasVSWR (Voltage Standing Wave Ratio) measurementDisplayString GETfwuRmtRFPowerOutputMeasThe value of Remote RF Power Output in dBmDisplayString GETfwuRmtPwrDetectorBoardRIADCPartNumPower Detector Inventory-ADC Part NumberDisplayString GETfwuRmtPwrDetectorBoardRISerialNumPower Detector Inventory-Serial NumberDisplayString GETfwuRmtPwrDetectorBoardRIDateCodePower Detector Inventory-Date CodeDisplayString GETfwuRmtPwrDetectorBoardRIHWVerPower Detector Inventory-Hardware VersionDisplayString GETfwuRmtSystemVSWRFaultMaskSystem VSWR (Voltage Standing Wave Ratio) FaultMASKType SETfwuRmtNoRFPowerFaultMaskNo RF Power Fault MASKType SETfwuRmtSystemVSWRFaultThresholdThreshold value for System VSWR (Voltage Standing Wave Ratio) Fault. This is not user settable.Integer32 SETfwuRmtLNANumberA unique identifier for LNA Objects (from 1 to 8)Integer32 GETfwuRmtLNATypeRemote LNA card type BANDType GETfwuRmtLNARIADCPartNumberLNA Inventory Data-ADC Part NumberDisplayString GETfwuRmtLNARISerialNumberLNA Inventory Data-Serial NumberDisplayString GETfwuRmtLNARIDateCodeLNA Inventory Data-Date CodeDisplayString GETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get or SET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-92.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 305ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuRmtLNARIHWVerLNA Inventory Data-Hardware Version.DisplayString GETfwuRmtLNAPowerFaultMaskShows masking status of Remote LNA Power Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuRmtRDINumberA unique identifier for each RDI (from 1 to 4)Integer32 GETfwuRmtRDIRIADCPartNumberRDI Inventory Data-ADC Part NumberDisplayString GETfwuRmtRDIRISerialNumberRDI Inventory Data-Serial NumberDisplayString GETfwuRmtRDIRIDateCodeRDI Inventory Data-Date Code DisplayString GETfwuRmtRDIRIHWVerRDI Inventory Data-Hardware VersionDisplayString GETfwuHstDARTOverDriveFaultMaskShows masking status of Host DART Over Drive Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuHstDARTUnderDriveFaultMaskShows masking status of Host DART Under Drive Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuRmtOverTempFaultMaskShow status of masking of Remote over temperature Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuRmtUnderTempFaultMaskShow status of masking of Remote Under Temperature Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuRmtOpenDoorFaultMaskShow status of masking of Remote Open Door Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuRmtFanOverSpeedFaultMaskShow status of masking of Remote Fan Over Speed Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-93.png)
![SNMP InterfacePage 306 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuRmtFanUnderSpeedFaultMaskShow status of masking of Remote Fan Under Speed Fault; masking is disabled by default; if enabled, the trap will not be raisedMASKType SETfwuRmtOverTempFaultThresholdThreshold value for remote over temperature Fault. This is not user settable.MASKType SETfwuRmtUnderTempFaultThresholdThreshold value for remote under temperature Fault. This is not user settable.MASKType SETfwuHMmonIndexIndex of mate monitor table. Integer32 GETfwuHMmonRmtLocationLocation of Remote connected to HostDisplayString GETfwuHMmonRmtIPAddressIP addresses of Remote IpAddress GETfwuHMmonRmtIDID of connected Remote REMOTENBRTypeGETfwuHMmonHstSideSFPIDSlot ID of the SFP at Host end. Integer32 GETfwuHMmonRmtSideSFPIDSlot ID of the SFP used at Remote endInteger32 GETfwuRMmonIndexIndex of mate monitor table Integer32 GETfwuRMmonHstIPAddressIP addresses of Host connected to the RemoteIpAddress GETfwuRMmonHstIDID of Host connected to the RemoteHOSTNBRType GETfwuRMmonRmtIDID of companion remote unit. REMOTENBRTypeGETfwuRMmonHstSideSFPIDSlot ID of the SFP at Host end Integer32 GETfwuRMmonRmtSideSFPIDSlot ID of the SFP used at Remote end.Integer32 GETfwuGeoHeartbeatTimerSpecifies Heartbeat can be sent at the timer specified here, from 1 to 30INTEGER SETfwuGeoIndexGeo objects Table Index. Unsigned32 SETfwuGeoLatitudeIdentifies the Latitude of RemoteDisplayString SETfwuGeoLongitudeIdentifies the Longitude of RemoteDisplayString SETfwuGeoRmtNameIdentifies the Latitude of RemoteDisplayString GETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get or SET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-94.png)
![FlexWave-URH Agent MIBFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 307ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuGeoStatusIdentifies the Latitude of RemoteINTEGER GETfwuDARTMappingIndexIndex of the DART table. Unsigned32 GETfwuHstIDID of the Host HOSTNBRType SETfwuHstDARTIDID of DART at Host to which the Remote DART is to be connected (from 1 to 8)INTEGER SETfwuHstSFPIDID of host side SFP ID connected toward the remote DART. (from 1 to 8)INTEGER SETfwuHstDARTPassBandPass-band type of Host DART cardPASSBANDTypeGETfwuRmtIDID of the Remote from which DART is to be connectedREMOTENBRTypeSETfwuRmtDARTIDID of Remote DART to which the Host DART will connect (from 1 to 8)INTEGER SETfwuRmtSFPIDID of Remote side SFP ID connected toward the Host DART (from 1 to 8)INTEGER SETfwuRmtDARTPassbandRemote side Band-PassBand information of the linked dartsPASSBANDTypeGETfwuHstSFPStartTimeSlotStart timeslot on the fiber that is carrying the DART traffic. This is a read-write object but it is not available for user to do a RW operation.Integer32 SETfwuHstSFPEndTimeSlotEnd timeslot on the fiber that is carrying the RF traffic from Host to Remote DART card. This is a Read-Write object, but is not available for user as a Read-Write operation.Integer32 SETfwuMappingStatusStatus of row RowStatus SETfwuRmtUnitResetProvides a way to reset the Remote SeRF card. Set to 1 to trigger a Remote resetINTEGER SETTable 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)Object Name Description SNMP Syntax Get orSET](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-95.png)
![SNMP InterfacePage 308 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200912.7 TRAPSThe EMS receives traps from SNMP agents and converts them to alarms and non-alarmed events for further processing and reporting. For information on GET/SET objects, see “FlexWave-URH Agent MIB” on page 292.Table 12-3. FlexWave-URH Agent MIB TrapsTrap Object DescriptionfwuHstSysCardFanFaultHost System Card Fan faultfwuHstModuleMissingFaultHost Module missing faultfwuHstOverTempFaultHost Over Temperature faultfwuHstUnderTempFaultHost Under Temperature faultfwuRmtModuleMissingFaultRemote Module missing faultfwuRmtOverTempFaultRemote Over Temperature faultfwuRmtUnderTempFaultRemote Under Temperature faultfwuRmtOpenDoorFaultDoor on the Remote is openfwuRmtFanOverSpeedFaultRemote fan has an Over Speed faultfwuRmtFanUnderSpeedFaultRemote fan has an Under Speed faultfwuHstSERFSynthAlarmFaultOnboard synthesizer faultfwuHstSERFFaultConsolidation of SeRF Onboard synthesizer fault and SeRF FPGA StatusfwuHstSERFRmtLostFaultRemote Lost fault-Host not receiving any messages from connected RemotefwuHstSERFOptRxBERFaultDecoded word error state of the primary wavelength optical receiver (too many errors)fwuHstSERFOptRxNoLightFaultReceiving light state of the primary wavelength optical receiver (no light)fwuHstSERFOptLaserFaultError state of laser forward pathfwuHstSERFOptOverDriveFaultHost SFP Over Drive faultfwuHstSERFOptUnderDriveFaultHost SFP Under Drive faultfwuHstSERFOptIpEnableFaultHost SFP IP Enable faultfwuHstDARTDwnCon1SynLockFaultLock State of the first Down Converter synthesizerfwuHstDARTDwnCon2SynLockFaultLock State of the second Down Converter synthesizerfwuHstDARTUpConSynLockFaultLock State of the Up Converter synthesizerfwuHstDARTOverDriveFaultHost DART Card Over Drive fault. RF signal received from BTS is too high](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-96.png)
![TrapsFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 309ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.fwuHstDARTUnderDriveFaultHost DART Card Under Drive fault. RF Signal received from the BTS is too lowfwuHstDARTFaultThis fault is a consolidated fault of fwuHstDARTDwnCon1SynLockFault,fwuHstDARTDwnCon2SynLockFault,fwuHstDARTUpConSynLockFault,fwuHstDARTFPGAStatus and fwuHstDARTDCSupplyFaultfwuHstDARTDCSupplyFaultHost DART Card DC Supply faultfwuHstDARTHardwareMismatchFaultIndicates a hardware mismatch for the RF and optical cards between Host and RemotesfwuRmtAcPowerSupplyFaultRemote AC Power Supply fault. This is an aggregation of ACPowerSupplyMonitor1,ACPowerSupplyMonitor2,ACPowerSupplyMonitor3,ACPowerSupplyMonitor4fwuRmtMajorExtAlarmInputFaultThe remote Major Ext Alarm Input FaultfwuRmtMinorExtAlarmInputFaultThe remote Minor Ext Alarm Input FaultfwuRmtSERFHstLostFaultHost Lost fault-Remote not receiving any messages from connected HostfwuRmtSERFOptRxBERFaultDecoded word error state of the primary wavelength optical receiver (too many errors)fwuRmtSERFOptRxNoLightFaultReceiving light state of the primary wavelength optical receiver (no light)fwuRmtSERFOptLaserFaultError state of laser forward pathfwuRmtSERFOptOverDriveFaultRemote SFP Over Drive faultfwuRmtSERFOptUnderDriveFaultRemote SFP Under Drive FaultfwuRmtSERFSynthAlarmFaultOnboard synthesizer faultfwuRmtSERFFaultConsolidation of SeRF Onboard synthesizer fault and SeRF FPGA StatusfwuRmtDARTDwnCon1SynLockFaultLock state of the first down converter synthesizerfwuRmtDARTDwnCon2SynLockFaultLock state of the second down converter synthesizerfwuRmtDARTUpConSynLockFaultLock state of the Upconverter synthesizerfwuRmtDARTDCSupplyFaultRemote DART Card DC Supply faultfwuRmtDARTFaultConsolidated fault for fwuRmtDARTDwnCon1SynLockFault,fwuRmtDARTDwnCon2SynLockFault,fwuRmtDARTUpConSynLockFault,fwuRmtDARTDCSupplyFault and DARTFPGAStatusfwuRmtDARTHardwareMismatchFaultIndicate the hardware mismatch for the RF DART card between Host and RemotesfwuRmtRangingFaultHost cannot auto-range a connected Remote anymoreTable 12-3. FlexWave-URH Agent MIB Traps (Cont.)Trap Object Description](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-97.png)
![SNMP InterfacePage 310 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009fwuRmtDARTOverTempFaultindicates a Remote DART Card Over Temperature FaultfwuRmtDARTUnderTempFaultIndicate the Remote DART Card Under Temperature FaultfwuRmtGPSFaultRemote GPS faultfwuRmtLPADisableFaultDisable state of the linear power amplifierfwuRmtLPAOverPowerFaultInternal over power fault state of linear power amplifier (power level is high enough to damage LPA)fwuRmtLPAHighTempFaultRemote LPA High Temperature faultfwuRmtLPAVswrFaultInternal VSWR fault state of linear power amplifier (greater than 3:1)fwuRmtLPADcFaultRemote LPA DC faultfwuRmtLPALoopFaultRemote LPA Loop faultfwuRmtLPALowPowerFaultInternal low power fault state of linear power amplifier (the gain of one or more internal amplifiers does not meet specification)fwuRmtLPADetectFaultPresence fault state of linear power amplifier (the LPA is missing)fwuRmtSystemVswrFaultRemote system Vswr faultfwuRmtNoRFPowerFaultRemote No RF Power faultfwuRmtLNAPowerFaultRemote LNA power faultfwuRmtFanFaultRemote system VSWR fault. This object hasn't been implemented in this releasefwuRmtACPowerSupplyMon4FaultAC Power monitor 4 FaultfwuRmtACPowerSupplyMon1FaultAC Power monitor 1 FaultfwuRmtACPowerSupplyMon2FaultAC Power monitor 2 FaultfwuRmtACPowerSupplyMon3FaultAC Power monitor 3 FaultfwuHstSysCardPrimaryCPFaultPrimary Clock Priority FaultfwuHstSysCardSecondaryCPFaultSecondary Clock Priority FaultTable 12-3. FlexWave-URH Agent MIB Traps (Cont.)Trap Object Description](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-98.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 311ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.PART IVAPPENDICES](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-99.png)
![Page 312 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Intentionally Blank Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-100.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 313ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.AHOST UNIT MODULE REPLACEMENTA.1 Host Fan Replacement Procedure .......................................................................314A.2 Power Supply Replacement Procedure ................................................................315A.3 System Card Replacement Procedure..................................................................317A.4 SeRF Card Replacement Procedure .....................................................................319A.4.1 Preserve System Configuration...................................................................319A.4.2 Remove the SeRF Card..............................................................................322A.4.3 Swap Compact Flash From Old SeRF Card to New SeRF Card..........................323A.4.4 Install New SeRF Card...............................................................................324A.5 DART Card Replacement/Installation Procedure....................................................325A.5.1 Replacing a DART Card in the Host Chassis ..................................................325A.5.2 Installing a New DART Card in the Host Chassis............................................325This section provides the Host maintenance procedures. Refer to this section when scheduled maintenance is required.Recommendation:: The replacement interval for the Host fan is 60 months.Content Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-101.png)
![Page 314 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009A.1 HOST FAN REPLACEMENT PROCEDUREContinuous airflow for cooling is provided by a fan assembly mounted on the left side of the Host housing. The cooling fans blow cool air into the enclosure. Heated air is exhausted through the vent openings on the right side of the enclosure. An alarm is generated if a high temperature condition (>90º C/122º F) occurs. The fan assembly may be field-replaced if either fan fails. Replacement of fan assembly does not require that the Host be turned off.Recommendation:: The replacement interval for the Host fan is 60 months.Use the following procedure to remove and replace the Host cooling fans:11 Notify the NOC or alarm monitoring system operator that the fan is being replaced. 22 Loosen the two thumb screws that secure the fan/grill assembly to the front of the Host enclosure.33 Carefully withdraw the fan/grill assembly from the enclosure. 44 Slide the new fan assembly into the Host chassis until it is firmly seated.55 Secure the fan/grill assembly to the front of the enclosure using the two screws loosened in Step 2.66 Verify that the fans run properly following power-up. 77 Notify the NOC or alarm monitoring system operator that the fans are back in operation.Electronic components can be damaged by static electrical discharge. To prevent ESD damage, slip on an Electrostatic Discharge (ESD) wrist strap and connect the ground wire to an earth ground source. Wear the ESD wrist strap while completing each step in this procedure.22396-AFANASSEMBLYTHUMBSCREWS](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-102.png)
![Power Supply Replacement ProcedureFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 315ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.A.2 POWER SUPPLY REPLACEMENT PROCEDURE11 Notify the NOC or alarm monitoring system operator that the system will be out of service for a period of time.22 Turn power switch to the OFF position. 33 Unplug power plug by applying pressure to the left and right side of the connector and pulling it straight out.44 Loosen the two thumb screws that secure the Power Supply to the front of the Host enclosure.55 Carefully withdraw the Power Supply from the enclosure. 66 Slide replacement Power Supply into the Host chassis until it is firmly seated.77 Secure the Power Supply to the front of the enclosure using the two thumb screws loosened in Step 4.88 Verify that the power switch is in its OFF position, and then plug power plug into the power connector on the front of the Power Supply. Make certain that it is fully seated.Removing the power supply disables the Host and interrupts service.Electronic components can be damaged by static electrical discharge. To prevent ESD damage, slip on an Electrostatic Discharge (ESD) wrist strap and connect the ground wire to an earth ground source. Wear the ESD wrist strap while completing each step in this procedure.22400-A](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-103.png)
![Page 316 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200999 Turn power switch to the ON position.100 Notify the NOC or alarm monitoring system operator that the system is back in operation.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-104.png)
![System Card Replacement ProcedureFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 317ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.A.3 SYSTEM CARD REPLACEMENT PROCEDURE11 Notify the NOC or alarm monitoring system operator that the System Card is being replaced.22 If used, disconnect EXT REF cables from the front of the System Card.33 Remove alarm plug from the front of the System Card by pressing on the lock tabs.44 Loosen the two thumb screws that secure the System Card to the front of the Host enclosure.There will be a Loss of Service during the time it takes to complete this procedure. Notify the NOC and alarm managers before starting this process.If the EXT REF is being used communications to other Hosts will be disrupted.Electronic components can be damaged by static electrical discharge. To prevent ESD damage, slip on an Electro- Static Discharge (ESD) wrist strap and connect the ground wire to an earth ground source. Wear the ESD wrist strap while completing each step in this procedure.22398-A](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-105.png)
![Page 318 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200955 Carefully withdraw the System Card from the enclosure. 66 Slide replacement System Card into the Host chassis until it is firmly seated.77 Secure the System Card to the front of the enclosure using the two thumb screws loosened in Step 4.88 If used, connect EXT REF cables to the front of the System Card.99 Plug alarm plug into the connector on the System Card.100 Notify the NOC or alarm monitoring system operator that the system is back in operation.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-106.png)
![SeRF Card Replacement ProcedureFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 319ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.A.4 SERF CARD REPLACEMENT PROCEDUREReplacing the SeRF card is a 14-step procedure that is broken into four sections, Follow the steps in the order given.A.4.1 Preserve System Configuration11 Before you start the procedure to replace the SeRF card, decide how you will restore the system configuration, which can be accomplished in one of two ways:•• Option A—You can remove the Compact Flash card from the old SeRF and install it into the new SeRF before installing the SeRF card in the Host.•• Option B—You can reconfigure the system once the new SeRF is installed. If you are going to reconfigure the system, before you remove the SeRF card, record the system settings in Table A-1, including frequency bands, gain and delay settings, module names and network information. Removing the SeRF Card will disable the Host and interrupt service. The entire system configuration is stored on the Compact Flash card on the SeRF. If you replace the SeRF with a new one, the system will NOT be operational immediately following replacement. Notify the NOC or alarm monitoring system operator that the system will be Out of Service (OOS) for a period of time.Table A-1. URH System ConfigurationEMS VIEW PARAMETER SETTINGIP ADDRESSESHost Network port IP addressHost Craft port IP addressRemote 1 IP addressRemote 2 IP addressRemote 3 IP addressRemote 4 IP addressRemote 5 IP addressRemote 6 IP addressRemote 7 IP addressRemote 8 IP addressHOST CONFIGURATIONHost Summary Host Name10 MHz Reference ClockOptical Ports view for the Host Optical Port 1 nameOptical Port 2 nameOptical Port 3 nameOptical Port 4 name](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-107.png)
![Page 320 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Optical Port 5 nameOptical Port 6 nameOptical Port 7 nameOptical Port 8 nameConfiguration and Alarm Details of DART 1DART NameDART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainConfiguration and Alarm Details of DART 2DART NameDART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainConfiguration and Alarm Details of DART 3DART NameDART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainConfiguration and Alarm Details of DART 4DART NameDART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainConfiguration and Alarm Details of DART 5DART NameDART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainConfiguration and Alarm Details of DART 6DART NameTable A-1. URH System Configuration (Cont.)EMS VIEW PARAMETER SETTING](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-108.png)
![SeRF Card Replacement ProcedureFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 321ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.DART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainConfiguration and Alarm Details of DART 7DART NameDART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainConfiguration and Alarm Details of DART 8DART NameDART Pass BandDART Operating ModeDART Diversity Status listDART Forward GainDART Reverse GainREMOTE CONFIGURATIONRemote Unit view Remote NameOptical Ports view for Remote n Optics Port NameConfiguration Details window DART nameRemote Dart IdRemote Dart SFP IdDART Forward GainDART Forward DelayDART Reverse DelayLPA Operating ModeTable A-1. URH System Configuration (Cont.)EMS VIEW PARAMETER SETTING](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-109.png)
![Page 322 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009A.4.2 Remove the SeRF Card22 Remove Network and Craft RJ-45 plugs from the front of the SeRF Card.33 Remove fiber patch cord from the SFPs. Note the location of the fiber patch cords.44 Loosen the two thumb screws that secure the System Card to the front of the Host enclosure.55 Use the two handles to carefully withdraw the SeRF Card from the enclosure.Electronic components can be damaged by static electrical discharge. To prevent ESD damage, slip on an Electrostatic Discharge (ESD) wrist strap and connect the ground wire to an earth ground source. Wear the ESD wrist strap while completing each step in this procedure.This equipment uses a Class 1 Laser according to FDA/CDRH rules. Laser radiation can seriously damage the retina of the eye. Do not look into the ends of any optical fiber. Do not look directly into the optical transmitter of any unit or exposure to laser radiation may result. An optical power meter should be used to verify active fibers. A protective cap or hood MUST be immediately placed over any radiating transmitter or optical fiber connector to avoid the potential of dangerous amounts of radiation exposure. This practice also prevents dirt particles from entering the connector. Improper handling can damage fiber optic cables. Do not bend fiber optic cable more sharply than the minimum recommended bend radius specified by the cable manufacturer. Do not apply more pulling force to the cable than specified.22397-AHANDLES](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-110.png)
![SeRF Card Replacement ProcedureFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 323ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.66 Do one of the following:•• If you plan to reconfigure the system once the new SeRF is installed, skip to Section A.5.2, Installing a New DART Card in the Host Chassis, on page 325.•• If you will be removing the Compact Flash card from the old SeRF and installing it into the new SeRF before installing the SeRF card in the Host, go to Section A.4.3, Swap Compact Flash From Old SeRF Card to New SeRF Card, on page 323.A.4.3 Swap Compact Flash From Old SeRF Card to New SeRF Card77 Remove the Compact Flash card from the new SeRF card by gently lifting the Compact Flash card out of its holder.88 Slide the Compact Flash removed from the old SeRF card into the new SeRF card. Install the Compact Flash card label side up, and with the connectors pointing toward the middle of the SeRF card. Gently push the Compact Flash card in until it is firmly seated.Do not complete this procedure if you are going to reconfigure the URH system after you install the new SeRF card—skip to “Install New SeRF Card” on page 324.75348p2-0001Compact Flash cardSeRF card](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-111.png)
![Page 324 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009A.4.4 Install New SeRF Card99 Slide replacement SeRF Card into the Host chassis until it is firmly seated.100 Secure the SeRF Card to the front of the enclosure using the two thumb screws loosened in Step 4.111 If necessary, install new SFPs or remove them from the SeRF card removed in Step 5 and install them in the new SeRF Card.122 Plug fiber patch cords back into the SFPs, making sure that you return the fiber patch cords to the position they were in prior to this procedure.133 Plug Network and Craft RJ-45 plugs into the connector on the SeRF Card. Make certain the fiber patch cords are inserted in the correct SFP.144 Notify the NOC or alarm monitoring system operator that the system is back in operation.If you are going to swap the Compact Flash card from the old SeRF card to the new, before starting this procedure, complete the steps in “Swap Compact Flash From Old SeRF Card to New SeRF Card” on page 323.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-112.png)
![DART Card Replacement/Installation ProcedureFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 325ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.A.5 DART CARD REPLACEMENT/INSTALLATIONPROCEDUREEach DART card is spectrum specific and provides an interface between the SeRF and the Power Amplifier. When additional service is needed another DART card can be added to the Host. Individual DART cards may be replaced without disrupting service to the entire remote system. Only the RF spectrum of the DART card being removed is affected.A.5.1 Replacing a DART Card in the Host Chassis11 Notify the NOC or alarm monitoring system operator that the DART card is being replaced.22 Disconnect REF IN and OUT cables from the front of the DART card.33 Loosen the two thumb screws that secure the DART card to the front of the Host enclosure.44 Carefully withdraw the DART card from the enclosure. 55 Slide replacement DART card into the Host chassis until it is firmly seated.66 Secure the DART card to the front of the enclosure using the two thumb screws loosened in Step 3.77 Connect REF IN and OUT cables to the front of the DART card.88 Notify the NOC or alarm monitoring system operator that the system is back in operation.A.5.2 Installing a New DART Card in the Host Chassis11 Notify the NOC or alarm monitoring system operator that another DART card is being added the Host.22 Determine slot location of the new DART card. See Figure 1-6 on Page 14 for DART card slot assignments.If you replace or install a DART card in the Host to change the RF, its equivalent must be replaced or added to the Remote by adding or replacing the corresponding Remote RF Module.Electronic components can be damaged by static electrical discharge. To prevent ESD damage, slip on an Electrostatic Discharge (ESD) wrist strap and connect the ground wire to an earth ground source. Wear the ESD wrist strap while completing each step in this procedure.Electronic components can be damaged by static electrical discharge. To prevent ESD damage, slip on an Electrostatic Discharge (ESD) wrist strap and connect the ground wire to an earth ground source. Wear the ESD wrist strap while completing each step in this procedure.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-113.png)
![Page 326 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/200933 Remove from the front of the Host the blank panel that corresponds to the selected slot location.44 Do one of the following:•• If you are installing a Dual SuperDART card:aa Loosen the two retaining screws on the front of the blank panel and then then remove the blank panel.bb Use a Phillips screwdriver to remove the two screws from the divider bar, and then remove the divider bar, storing the bar and screws for potential future use.•• If a Dual SuperDART card had previously been installed and you are now installing a Single SuperDART or Classic DART, use two Phillips-head screws to reinstall a divider bar.Blank Panel with2 Retaining ScrewsDivider Bar with2 Philips-Head Screws77073-079](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-114.png)
![DART Card Replacement/Installation ProcedureFlexWave Prism Host, Remote and EMS 5.1 System Reference Page 327ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.55 Slide the DART card into the Host chassis until it is firmly seated.66 Secure the DART card to the front of the enclosure using the two thumb screws.77 Obtain the required lengths of high performance, flexible, low loss 50-ohm coaxial communications cable (RG-400 or equivalent) for all coaxial connections. 88 Route the forward and reverse path coaxial cables between the Host and the BTS interface (per system design plan) and cut to the required length. Allow sufficient slack for dressing and organizing cables at the Host and for installing an external attenuator in the forward path link. 99 Terminate each cable with an QMA-type male connector following the connector supplier’s recommendations. 100 If required, install an external attenuator in the forward path.111 Connect the forward and reverse path cables as shown as shown in Step 21 in Section 3.3.5, Coaxial Cable Connections, on page 70:aa Connect the forward path cable to the FWD RF IN connector on the Host DART front panel.bb Connect the reverse path cable to the REV RF OUT connector on the Host DART front panel.122 Dress and secure cables at the right side of the Host.133 Complete all remaining coaxial connections as specified in the system design plan.144 Notify the NOC or alarm monitoring system operator that the DART card is ready for operation.The composite forward path RF signal level at the Host must be between –25 and + 5 dBm. Do not connect the forward path cable until the composite forward path RF signal level is measured and the amount of external attenuation required is determined.22401-A](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-115.png)
![Page 328 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Intentionally Blank Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-116.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 329ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.BGENERAL INFORMATIONB.1 Warranty/Software...........................................................................................329B.2 Software Service Agreement..............................................................................329B.3 Repair/Exchange Policy .....................................................................................329B.4 Repair Charges ................................................................................................330B.5 Replacement/Spare Products .............................................................................330B.6 Returned Material.............................................................................................330B.1 WARRANTY/SOFTWAREThe Product and Software warranty policy and warranty period for all ADC Products is published in ADC’s Warranty/Software Handbook. Contact the Technical Assistance Center at 1-800-366-3891, extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada) for warranty or software information or for a copy of the Warranty/Software Handbook.B.2 SOFTWARE SERVICE AGREEMENTADC software service agreements for some ADC Products are available at a nominal fee. Contact the Technical Assistance Center at 1-800-366-3891, extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada) for software service agreement information.B.3 REPAIR/EXCHANGE POLICYAll repairs of ADC Products must be done by ADC or an authorized representative. Any attempt to repair or modify ADC Products without written authorization from ADC voids the warranty.If a malfunction cannot be resolved by the normal troubleshooting procedures, call the Technical Assistance Center at 1-800-366-3891, extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada). A telephone consultation can sometimes resolve a problem without the need to repair or replace the ADC Product.Content Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-117.png)
![Page 330 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009If, during a telephone consultation, ADC determines the ADC Product needs repair, ADC will authorize the return of the affected Product for repair and provide a Return Material Authorization number and complete return shipping instructions. If time is critical, ADC can arrange to ship the replacement Product immediately. In all cases, the defective Product must be carefully packaged and returned to ADC.B.4 REPAIR CHARGESIf the defect and the necessary repairs are covered by the warranty, and the applicable warranty period has not expired, the Buyer’s only payment obligation is to pay the shipping cost to return the defective Product. ADC will repair or replace the Product at no charge and pay the return shipping charges.Otherwise, ADC will charge a percentage of the current Customer Product price for the repair or NTF (No Trouble Found). If an advance replacement is requested, the full price of a new unit will be charged initially. Upon receipt of the defective Product, ADC will credit Buyer with 20 percent of full price charged for any Product to be Out-of-Warranty. Products must be returned within thirty (30) days to be eligible for any advance replacement credit. If repairs necessitate a visit by an ADC representative, ADC will charge the current price of a field visit plus round trip transportation charges from Minneapolis to the Buyer’s site.B.5 REPLACEMENT/SPARE PRODUCTSReplacement parts, including, but not limited to, button caps and lenses, lamps, fuses, and patch cords, are available from ADC on a special order basis. Contact the Technical Assistance Center at 1-800-366-3891, extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada) for additional information.Spare Products and accessories can be purchased from ADC. Contact Sales Administration at 1-800-366-3891, extension 73000 (in U.S.A. or Canada) or 1-952-938-8080 (outside U.S.A. and Canada) for a price quote and to place your order.B.6 RETURNED MATERIALContact the ADC Product Return Department at 1-800-366-3891, extension 73748 (in U.S.A. or Canada) or 952-917-3748 (outside U.S.A. and Canada) to obtain a Return Material Authorization number prior to returning an ADC Product.All returned Products must have a Return Material Authorization (RMA) number clearly marked on the outside of the package. The Return Material Authorization number is valid for 90 days from authorization.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-118.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 331ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.CGLOSSARYAlarmA physical or functional state affecting the ability of a Host/Remote pair to function normally. Reported by the Host/Remote pair to the EMS to notify the user that such a state exists.AttenuationFunction applied to an RF signal to lower the signal level. Can be set for a Host/Remote pair using an EMS window or command.BandRF spectrum defined as an entity for communication purposes and assignable to a service provider for cell phones and similar devices. Examples are Cellular and PCS.Base Transceiver StationSignal processing station at the base of a tower or at some other location with access to the main antenna. Its primary function is to transport RF signals between the main antenna and cell phone users.BTSSee Base Transceiver Station. DARTDigital to Analog Receiver Transmitter. Interface card used in both Host and Remotes. Its primary function is data conversion of RF to optical and vice versa. Each DART provides one RF band.DelayRF propagation delay, which can be set for a linked Host DART and Remote DART using an EMS window or command.EMSFlexWave Prism Element Management System, the software application documented in this document.ENET PortEthernet port capable of CAT5 transmission.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-119.png)
![Page 332 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Forward PathSignal path in the direction from the BTS to the cell phone.Hypertext Transfer Protocol (HTTP)HTTP is a is a request/response standard used by the World Wide Web in which the WWW is a web site is the server and the end user is the client. The EMS uses HTTP to allow access to a Host or Remote through its IP address.Host UnitFlexWave Prism network element that receives an RF signal from the BTS and converts it to an optical signal to its paired Remotes.Linear Power Amplifier(LPA)An electronic module in the Remote. Its job is to provide a large power gain to forward path signals.LNALow Noise Amplifier. An electronic module in the Remote. The LNA amplifies the reverse path RF signal.Log FileEMS history file into which alarms are written as they occur. It can be used to review recent alarms.MaskA software setting placed on an alarm type that causes all alarms of this type to not be reported in the EMS. The LEDs for a masked alarm display in gray instead of the standard red, yellow, and green.Normal ModeOne of the operating modes of the DART and LPA. In this mode the equipment is transporting RF signals normally.Radio Frequency(RF) Radio-type frequency modulation signal received at the BTS and transmitted from the Remote to the cell phone.Reverse PathSignal path in the direction from the cell phone to the BTS.Remote UnitFlexWave Prism network element that receives an optical signal from its paired Host, converts the optical signal to RF, and transmits the RF signal to cell phones in a local coverage area.RF Signal LevelMeasured power of the forward path and reverse path RF signals as measured in the Host/Remote pair and reported in the EMS.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-120.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 333ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.Standby ModeOne of the operating modes of the DART and LPA. In this mode, RF transport is disabled and power consumption is minimized.ThresholdValue that defines when a reported state in the Host/Remote pair is considered to be in alarm.URHUniversal Radio Head. This name derives from the ability of a FlexWave URH Remote to support multiple bands of different types.](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-121.png)
![Page 334 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Intentionally Blank Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-122.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 335ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.DCONTACTING ADC13944-QContents herein are current as of the date of publication. ADC reserves the right to change the contentswithout prior notice. In no event shall ADC be liable for any damages resulting from loss of data,loss of use, or loss of profits and ADC further disclaims any and all liability for indirect, incidental,special, consequential or other similar damages. This disclaimer of liability applies to all products,publications and services during and after the warranty period.REPRINTS:www.adc.com/manualsPDF copies of manuals are availablefor downloading at the following link:PRODUCT INFORMATION AND TECHNICAL ASSISTANCE:connectivity.tac@adc.comwireless.tac@adc.comeuro.tac@adc.comasiapacic.tac@adc.comADCP Number:WRITE:ADC Telecommunications (S’PORE) PTE, LTD;100 Beach Road, #18-01, Shaw Towers.Singapore 189702.ADC Telecommunications, INCPO Box 1101,Minneapolis, MN 55440-1101, USAADC European Customer Service, INCBelgicastraat 2,1930 Zaventem, Belgium77-073PHONE :U.S.A. or CANADASales: 1-800-366-3891 Extension 73000Technical Assistance: 1-800-366-3891 Connectivity Extension: 73475 Wireless Extension: 73476EUROPESales Administration: +32-2-712-65 00Technical Assistance: +32-2-712-65 42EUROPEAN TOLL FREE NUMBERSGermany: 0180 2232923UK: 0800 960236Spain: 900 983291France: 0800 914032Italy: 0800 782374ASIA/PACIFICSales Administration: +65-6294-9948Technical Assistance: +65-6393-0739ELSEWHERESales Administration: +1-952-917-3000Technical Assistance: +1-952-917-3475](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-123.png)
![Page 336 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Intentionally Blank Page](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-124.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 337ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.INDEXNumerics10 MHz Reference Clock list ................... 1484G readiness ..............................................4AAC power junction box ........................... 126AC power port ........................................ 128AC Power Supply Fault LED .................... 242AC power wiring, Remote ................125–128AccessNetwork Manager ............................. 200Network User ................................... 200Access Level list ..................................... 200AccessingEMS ................................................. 188FlexWave-URH Agent MIB ................ 282AccessLevel column ............................... 197ADC-FLEXWAVE-URH.mib ...................... 280Add New User link .......................... 197,199add user ................................................ 200admin user access ................................. 196Agent SwVer column, System Inventory table............................................................ 181AlarmMajor, DARTs ................................... 253Alarm Details of DART-n of Group n on Remote-n window ........ 236–237,253–254Alarm Indications ...................................141Alarm Management Table window .. 260,262Alarm Summary indicator .......................178Alarm Summary of RF Groups of Remote-n view ............................................ 250–251Alarm Type column ................................258AlarmsMinor, DARTs ...................................254Antenna cable, Remote .................. 123–125Applications, FlexWave Prism .................... 5Apply button .............................................xiAPPMon SwVER column, System Inventory table ...................................................181Auto Refresh list .....................................179Auto Refresh Time box ...........................179AWS bandwidths ................................ 24–25BBand-Config link ............................. 152,168BandwidthsAWS ............................................. 24–25DART cards .................................. 20–23options ......................................... 20–23PCS .............................................. 24–25versus timeslots .................................19](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-125.png)
![Page 338 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Boot Loader Ver column, System Inventory table ................................................... 181CCanceling a procedure ............................... xiCaution icon ...............................................xChange Access Level button ........... 197,203Change Access Level window ................. 203Change passwordanother user .............................206–207your own ......................................... 208Change Password button .197,206,207,208Change Password Settings viewchanging another’s password ........... 206changing your password .................. 208Chassis groundHost ...................................................69Remote ...................................... 118–??Class column, SNMP interface ................ 291Clock source, setting .......................147–149Close button ............................................. xiCoaxial cableinstall, Host ................................. 70–71Compact Flash SwVer column, System Inventory table ................................... 181ComponentsPrism system .......................................6Remote Unit .......................................36Configuration and Alarm Details of Dart n on Host-n window .................................... 226Configuration and Alarm Details window 153,............................................................ 170Configuration Details table ..................... 163Configuration link ................................... 179Configuring Host DARTs ..................152–155Confirmation dialogdecommissioning a Host DART .........221decommissioning a Remote DART .... 234decommissioning a Remote Unit ......245delete user .......................................210reset Host Unit .................................216reset unit .........................................247Connect to dialoglocal loginHost ...........................................193Remote ......................................191remote log in ...................................188ConnectorsRemote ........................................ 47–48Course Wavelength Division Multiplexer System ............................................ 51–54Craft portHost ...................................................80Craft Port status, Host ............................218DDART alarm ............................................250DART cardsalarmsMajor .........................................253Minor .........................................254bandwidths .................................. 20–23configuring ............................... 152–155decommissioningHost ................................... 220–221Remote ............... 232–234,244–245install, Host .............................. 325–327linking ...................................... 162–166overview ...................................... 12–15unlink ...............................................173DART DC Supply Fault ............................253DART Diversity Status list 153,154,171,173,............................................................174DART FaultHost .................................................227Remote ............................................253DART Forward Delay box ........................166DART Forward Gain list ........................... 165](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-126.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 339ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.DART Hardware Mismatch FaultHost ................................................. 227Remote ............................................ 253DART Indicator ....................................... 214DART Low Temperature Fault ................. 254DART Name box ......................153,170,173DART Operating Mode list .......153,171,173DART Over Drive Fault ........................... 227DART Over Temperature Fault ............... 253DART Pass Band (Timeslots) list .... 153,170,173DART Remote Ranging Fault .................. 253DART Reverse Delay box ........................ 166DART Reverse Gain list .......................... 154DART UnderDrive Fault .......................... 227Date Code columnHost Inventory table ........................ 182Remote Inventory table ................... 183Date column, SNMP interface ................. 291Decommission button ............................ 163Decommission Unit button ..................... 243DecommissioningHost DART ................................220–221Remote DART ............232–234,244–245Delete Entry button ................................ 291Delete the Selected Rows ....................... 291Delete User button ......................... 197,210Determine power, Remote ..............129–131Diversity reverse path ..............................17Divider bar, Host Unit ............................ 326Duplexer, remote .....................................40EE911 Support ...........................................16E911 support ............................................16EMS Menu bar ................................ 138,140EMS View Frame ....................................138Enable Logging check box ......................291ENET Configurations viewHost ......................................... 217–219Remote .................................... 230–231ENETMon SwVer column, System Inventory table ...................................................181Ethernet CAT 5 cable ..............................142EXT REF connections, Host ................. 78–79FFan Over Speed Fault .............................242Fan Under Speed Fault ...........................242Fan, Host ...............................................314Fiber Optic Transport .......................... 17–18Finishing a procedure ................................xiFlexWave URH EMS ................................... 4FlexWave-URH Agent MIBaccessing .........................................282GET/SET Objects ...................... 292–307Traps ....................................... 308–310Fonts .........................................................xiForward path optical signal .......................17FPGA Ver column, System Inventory table ..181FPGAMon SWVer column, System Inventory table ...................................................182Function Explorer Tree ...........................138Fwd Launch column](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-127.png)
![Page 340 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Host ................................................. 225Remote ............................................ 249GGeneral Configuration window ................ 179Graphical User Interface, overview ........ 138Green LED .............................................. 141Grey LED ............................................... 141HHandset interface, remote ........................36Host ....................................................... 168Host Dart Band column .......................... 163Host Dart Id column ............................... 163Host Dart Pass Band column .................. 163Host Dart SFP Id column ........................ 163Host DART Status column ...................... 163Host DART’s Alarm Summary view 152,168,220,.............................................226–227Host DARTs, configuring .................152–155Host ENET Configurations view .......217–219Host IP Address field .............................. 178Host Lost Fault LED ................................ 242Host Major Contact Alarm Output Indicator .214Host Minor Contact Alarm Output Indicator .214Host mounting brackets ..................... 66–67Host Name box ...................................... 147Host Name column ................................. 258Remote ............................................ 249Host Name, creating .......................147–149Host Name, Function Explorer Tree ........148Host No column ......................................258Host SERF optical ports, labeling ............151Host Summary view ................147–149,214Host Temperature Measurement ............223Host UnitDARTsdecommissioning ............... 220–221linking to Remote ............... 162–166front panel ................................... 30–33network connection ............................33overview ............................................30resetting .................................. 215–216RF signal connections .........................33specifications .....................................56system card .......................................34Host Unit Name field ..............................178Hw Ver columnHost Inventory table ........................182Remote Inventory table ...................183HWMon SwVer column, System Inventory table ...................................................181IIcons ......................................................... xIllustrations ...............................................xiIndoor coverage ........................................ 4Information column ........................ 152,168InstallationHostchassis ground .............................69Coaxial cable .......................... 70–71Craft port .....................................80EXT REF connections .............. 78–79Optical connections ................ 72–77Optical connections, no WDM .74–75Optical connections, with WDM .76–77OSP Fiber cable ............................68Power connections ................. 83–86System Alarm connections ..... 81–83WDM components .................. 90–91](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-128.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 341ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.Host DART card ........................325–327Host fan ........................................... 314Host into equipment rack ............. 66–67Host power supply ........................... 315Host SeRF card .........................319–324Host system card ......................317–318RemoteAC power wiring .................125–128Antenna cable .....................123–125determine power ................129–131ground wire ......................... 118–??mounting plans ............................96Network cable .....................119–120Quad Fiber cable .................121–123RF Module ............................ 98–??, 106Installation prerequisitesHost ...................................................64Internet Explorer ................................... 142IP Address field ...................................... 178Ip Enable ....................................... 151,249setting, Remotes .............................. 158IpEnable Fault ........................................ 225LLabelingHost SERF optical ports .................... 151Host Unit ..................................147–148Remote .....................................156–157Laser Fault columnHost ................................................. 225Remote ............................................ 249LC Attenuator ...........................................73LEDs, alarms .......................................... 141Lightning Surge Suppressor ..................... 50Linear Power Amplifier, Remote ............... 41Linking ................................................... 159Remote DART to Host DART ......162–166remote DART to Host DART ......162–166Linux Kernel Ver column, System Inventory table ................................................... 181LNA alarm .............................................. 251LNA Major Alarms ...................................254LNA Power Fault .....................................254LongRangeHost .................................................225Remote ............................................249Low Noise Amplifier, remote .....................40LPArestarting ................................. 236–239LPA alarm ...............................................250LPA DC Fault ..........................................254LPA Resets .......................................237LPA Disable Fault ....................................254LPA Resets .......................................236LPA High Temperature Fault ...................254LPA Loop Fault .......................................254LPA Resets .......................................237LPA Low Power Fault ..............................254LPA Resets .......................................237LPA Major Alarms ...................................254LPA Minor Alarms ...................................254LPA Missing Fault ........................... 237,254LPA Over Power Fault .............................254LPA Resets .......................................237LPA Reset button ............................ 163,236LPA VSWR Fault .....................................254LPA Resets .......................................237MMajor alarms ..........................................141Major Alarms table .................................242Management Port status .........................218Masking alarm types ..............................260MATEMon SwVER column, System Inventory table ...................................................181](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-129.png)
![Page 342 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009MaterialsHost installation .................................65Remote installation ............................95Menu bar ............................................... 140Message, SNMP interface ....................... 291MIB ........................................................ 278MIB browser ........................................... 281Millimeter wave backhaul ...........................4Millimeter Wave System ...........................55Minor alarms .......................................... 141Minor Alarms table ................................. 242Module Number column ......................... 258Module Type column .............................. 258Host Inventory table ........................ 182Remote Inventory table ................... 183Module Type column, System Inventory table............................................................ 181Mounting brackets, remote ......................46Mounting plans, Remote ..........................96Multi Fibers ............................................ 159Multi-Host systemoverview ...................................... 10–11Multi-Host Systems ..................................10NNetwork cable, Remote ...................119–120Network Interface Card .......................... 142Network Interface list ............................. 149Network Manager access level ............... 196Network Manager role ............................ 200Network Manager, assign role of ............ 200Network Port statusHost .................................................218Network Userassign role of ...................................200change user role ..............................203Network User access level ......................196Network User role ..................................200networkManageradd user ...........................................200change user account ........................203networkUser ...........................................200change user account ........................203New Link listHost DARTs ......................................173New Password box ..................200,207,208Normal mode ..........................153,171,173Note icon ................................................... xOOK button .................................................xiOld Password box ...................................208Open Door Fault .....................................242Operator access level .............................196OptEnetPort status, Host ........................218Optical connections, Host ................... 72–77Optical Ports alarmHost .................................................222Remote ............................................248Optical Ports On Remote-n view ..... 248–249Optical Ports viewHost ..................................151,224–225Remote ............................................158Optics Name columnHost .................................................225Remote ............................................249Optics Number column](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-130.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 343ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.Host ................................................. 225Remote ............................................ 249Optics Port Name boxHost ................................................. 151Remote ............................................ 158Optics Type columnHost ................................................. 225Remote ............................................ 249OSP Fiber cable ........................................68Outdoor coverage ......................................4Over Temperature FaultHost ................................................. 223Remote LED ..................................... 242OverDrive Fault columnHost ................................................. 225Remote ............................................ 249OverviewDART cards .................................. 12–15E911 support .....................................16Graphical User Interface .................. 138Host Unit ...........................................30Multi-Host systems ...................... 10–11Prism system .......................................4SNMP interface ................. 276,277–279URH Element Management Software .....136–.............................................. 137Wavelength Division Multiplexer System87–..................................................90PParserEditor ........................................... 291Part Number columnHost Inventory table ........................ 182Remote Inventory table ................... 183Passwords, changinganother user .............................206–207your own ......................................... 208PCS bandwidths ................................. 24–25Power connectionsHost ............................................. 83–86Power Det alarm .................................... 251Power Detector Major Alarms ................. 253Power supplyremote ...............................................44Power supply, Host .................................315Primary Clock Priority Fault ....................223Prism systemcomponents ........................................ 6Host Unit overview .............................30overview ............................................. 4product family .............................. 28–29ProAx connector dust cover ....................121Procedures ................................................xiQQuad Fiber cable, Remote .............. 121–123RReceive broadcast packet counterHost .................................................219Remote ............................................231Receive byte counterHost .................................................218Remote ............................................230Receive FCS error counterHost .................................................218Remote ............................................230Receive fragments counterHost .................................................219Remote ............................................231Receive jabber counterHost .................................................219Remote ............................................231Receive multicast packet counterHost .................................................219Remote ............................................231Receive packet counterHost .................................................218Remote ............................................230Red LED .................................................141](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-131.png)
![Page 344 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Re-enter Password box ...........200,207,208Refresh button .......................................... xiRemote Alarm Summary view ................ 240Remote Antenna Cable Connections .........49Remote Capacity field ............................ 242Remote Cooling ........................................49Remote Dart Id column .......................... 163Remote Dart SFP Id column ................... 163Remote Dart Status column ................... 163Remote Fiber Connector Cable Assembly .49Remote Grounding ...................................49Remote IP Address field ......................... 178Remote Lost Fault LED ........................... 242Remote Major Contact Alarm Output Indicator ............................................. 214Remote Minor Contact Alarm Output Indicator ............................................. 214Remote Name box ................................. 157Remote Name column ............................ 258Remote name, entering ..................156–157Remote No column ................................. 258Remote Optical Port Name Configuration window ............................................... 158Remote RF Module Shelf ..........................98Remote SERF ENET ................................ 230Remote Temperature field ...................... 242Remote Unitconnectors ................................... 47–48DARTsdecommissioning ................232–234linking to Host ....................162–166mounting brackets .............................46power supply .....................................44resetting .................................. 246–247RF modules .................................. 38–39SeRF modules ....................................43Solar Shield ........................................45remote Unitcomponents .......................................36handset interface ...............................36Linear power Amplifier .......................41Low Noise Amplifier ............................40specifications .....................................57remote unitDuplexer ............................................40Remote Unit Name field ......................... 178Remote Unit view ...................................156ReplacementHost DART card ........................ 325–327Host SeRF card ........................ 319–324Host system card ..................... 317–318replacementHost fan ...........................................314Host power supply ...........................315Reset Unit button ........................... 215,243ResettingHost unit .................................. 215–216Remote unit ............................. 246–247Restarting LPA ................................ 236–239Rev Receive columnHost .................................................225Remote ............................................249Reverse path optical signal .......................17RF Groups Alarm Summary LED .............241RF Moduleinstallation ........................... 98–??, 106RF Module cables ....................................104RF Modules, Remote ........................... 38–39RF Power Fault .......................................253](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-132.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 345ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.RF transmissionconfiguring Host DARTs ................... 152RF-over-fiber transport ..............................4Rx BroadCast Pkts counterHost ................................................. 219Remote ............................................ 231Rx Bytes counterHost ................................................. 218Remote ............................................ 230Rx Fragmented Frames counterHost ................................................. 219Remote ............................................ 231Rx FSC Errors counterHost ................................................. 218Remote ............................................ 230Rx Jabber Frames counterHost ................................................. 219Remote ............................................ 231Rx MultiCast Pkts counterHost ................................................. 219Remote ............................................ 231Rx Pkts counterHost ................................................. 218Remote ............................................ 230RxBer Fault columnHost ................................................. 225Remote ............................................ 249RxNoLight Fault columnHost ................................................. 225Remote ............................................ 249SSecondary Clock Priority Fault ................ 223Select radio button ................................. 197SeRF (Serialized RF) digital protocol ........17SERF card, alarms, Host ........................ 222SeRF card, Host ..............................319–324SERF Fault alarmHost ................................................. 222Remote ............................................248SERF IndicatorHost .................................................214SERF LEDRemote ............................................241SeRF modules, Remote ............................43Serial Number columnHost Inventory table ........................182Remote Inventory table ...................183Severity column .....................................258Show Details button ...............................291Simple Network Management Protocol ... 278SNMP interface ............................... 277–279overview ..........................................276SNMP Procedures ...................................281accessing FlexWave-URH Agent MIB 282registering manager for traps ... 283,284viewing traps ........................... 287–291snmpTargetAddrDomain .........................286snmpTargetAddrName ............................286snmpTargetAddrParams .........................286snmpTargetAddrRetryCount ................... 286snmpTargetAddrStorageType ................. 286snmpTargetAddrTAddress ......................286snmpTargetAddrTagList ..........................286snmpTargetAddrTimeout ........................286Solar Shield, Remote ................................45Source column, SNMP interface ..............291SpecificationsHost ...................................................56remote ...............................................57System Nominal Optical .....................58Standby mode .........................153,171,173](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-133.png)
![Page 346 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009Starting a procedure ................................. xiSwitch Port status, Host ......................... 218System Alarm connections, Host ........ 81–83System card, Host ..........................317–318System Fan Fault ................................... 222System Inventory link ............................ 180System Inventory view .......................... 180System Nominal Optical specifications .....58System Requirements ............................ 142System VSWR Fault ............................... 253TTime Stamp column ............................... 258Timeslotsversus bandwidths .............................19Timeslots listHost DARTs ...................................... 173TitleHost Inventory table ........................ 182Remote Inventory table ................... 183ToolsHost installation .................................65Remote installation ............................95Transmit broadcast packet counterHost ................................................. 219Remote ............................................ 231Transmit byte counterHost ................................................. 219Remote ............................................ 231Transmit multicast packet counterHost ................................................. 219Remote ............................................ 231Transmit packet counterHost ................................................. 219Remote ............................................ 231Trap Table, SNMP interface .................... 291Tx BroadCast Pkts counterHost .................................................219Remote ............................................231Tx Byte CounterHost .................................................219Remote ............................................231Tx MultiCast Pkts counterHost .................................................219Remote ............................................231Tx Pkt CounterHost .................................................219Remote ............................................231Type column, SNMP interface .................291UUndefined mode ......................153,171,173Under Temperature FaultHost .................................................223Remote LED .....................................242UnderDrive Fault columnHost .................................................225Remote ............................................249Uninterruptible Power Supply ...................50Unit column, System Inventory table .....181Unknown_HostName ..............................178Unknown_RmtName ...............................178UNKNOWN_SFPNAME .............................151UNKNOWN_SFPNameHost .................................................225Remote ............................................249UnlinkHost DARTs ......................................173Remote DART ...................................176Unmasking alarm types ..........................262UnpackHost ...................................................66URH on SERF of Host view .............. 222–223set Master Clock Priority Level .........150](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-134.png)
![FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 347ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.URH on SERF of Remote view ................ 248URH Remote Unit Remote-n summary . 240–243decommissioning Remote .........244–245resetting Remote ............................. 246User access levels .................................. 196User Account Management node ............ 197User Account Management view ............. 197User Authentication ................................ 196User Authorization ................................. 196User documentation ...................................xUser icon ....................................................xUser ID box ........................................... 200User ID field ........................................... 203User roles .............................................. 200UserID column ....................................... 197VView Trap Details. .................................. 291Viewer access level ................................ 196ViewingHost Summary view ......................... 214WWave Length columnHost ................................................. 225Remote ............................................ 249Wavelength Division Multiplexer System 50–51,.................................................. 87–90WDM components, install ................... 90–91White LED .............................................. 141Windows 2000 ....................................... 142Windows XP ........................................... 142YYellow LED .............................................141](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-135.png)
![Page 348 FlexWave Prism Host, Remote and EMS 5.1 System Reference© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-136.png)
![Website: www.adc.com](https://usermanual.wiki/ADC-Telecommunications/PRSM074C.Manual-part-3/User-Guide-1476801-Page-138.png)