8BITDO TECHNOLOGY SNFPRO80D 8Bitdo SF30 Pro Bluetooth GamePad User Manual

8BITDO TECHNOLOGY HK LIMITED 8Bitdo SF30 Pro Bluetooth GamePad Users Manual

Users Manual

SF30 Pro and SN30 ProBasic operationPress START to turn on the controllerPress and hold START for 3 seconds to turn off the controllerPress and hold START for 8 seconds to force turn off the controllerBluetooth connectionSwitch1. Press START+Y to turn on the controller first, then press and hold PAIR for 3 seconds to enterpairing mode. LED will，LEDs will start to rotate from left to right.2. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order andwait for controller to sync up. LED will become solid when connection is successful.3. Controller will auto reconnect to your Switch with the press of START once it has beenpaired.STAR button = Switch screenshot button, Home button = Switch HOME button.Android1. Press START+B to turn on the controller, LED 1 will start to blink.2. Press and hold PAIR for 3 seconds to enter pairing mode. LED will rotate from left to right.3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30Pro]. LED will become solid when connection is successful.4. Controller will auto reconnect to your Android device with the press of START once it hasbeen paired.USB Connection: connect the controller to your Android device via USB Cable after step 1.Windows1. Press START+X to turn on the controller, LEDs 1, 2 will start to blink.2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.80DB 80DA
3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30Pro]. LED will become solid when connection is successful.4. Controller will auto reconnect to your Windows device with the press of START once it hasbeen pairedUSB Connection: connect the controller to your Windows device via USB Cable after step 1.macOS1. Press and hold START+A for 1 second to power on the controller, LEDs 1,2,3 will start toblink.2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.3. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LED willbecome solid when connection is successful.4. Controller will auto reconnect to your Windows device with the press of START once it hasbeen paired.USB Connection: connect the controller to your macOS device via USB Cable after step 1.Turbo function1. Hold the button you would like to set turbo functionality to and then press the STAR button toactivate turbo functionality.2. HOME LED will blink when turbo functionality has been applied successfully.3. All buttons with Turbo functionality activated will cause the HOME LED to blink, showingyou that Turbo functionality is active on that button.4. To deactivate turbo function, hold the button with turbo functionality activated press theSTAR button to deactivate turbo functionality. The HOME LED will no longer blink if youhave successfully disabled turbo functionality.Analog sticks are not included.This does not apply to Switch.BatteryStatus LED IndicatorLow battery mode POWER LED blinksBattery charging POWER LED stays solidBattery fully charged POWER LED turns off·Built-in 480 mAh Li-on with 16 hours of play time.·Rechargeable via its USB-C cable with 1 – 2 hour charging time.
Battery charging time might vary depending to the environment the controller isexposed to.Power Saving·Sleep mode - 1 minute with no Bluetooth connection.·Sleep mode - 15 minutes with Bluetooth connection but no use.·Press START to wake up your controller.Support and firmware upgradePlease visit support.8bitdo.com for further information and additional support.
FCC Statement15.191. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.15.21Note: The grantee is not responsible for any changes or modifications not expressly approved bythe party responsible for compliance. Such modifications could void the user’s authority to operatethe equipment.15.105(b)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help

Navigation menu